Tel.: 00971 4 2344772, Fax: 00971 4 2344996, … Steel... · 2018. 8. 3. · 10. Prestigious List...

Tel.: 00971 4 2344772, Fax: 00971 4 2344996, [email protected] Post Box No: 81082, Dubai, United Arab Emirates

MECHONTrading & Contracting

UAE

ADVANCE GroupTel .: 00971 4 2344772,Fax.: 00971 4 2344996,P.O.Box.: 81082, Dubai, [email protected]

INDIA

ADON Contractor & InteriorTel .: 0091 484 2533034, Fax.: 0091 484 2533035,Vytila, Kochi, Kerala, [email protected]

QATAR

MECHON Trading & ContractingTel .: 00974 44123667Fax.: 00974 44816343P.O.Box 201609,Doha, [email protected]

OMAN

Advance Technical SolutionTel.: 00968 24798877,Fax: 00968 24798844,P.o.Box.: 203, Postal Code: 117Wadi Kabir, Sultanate of [email protected]

TECHNICAL SOLUTION LLCMECHONTrading & Contracting

UAE

ADVANCE GroupTel .: 00971 4 2344772,Fax.: 00971 4 2344996,P.O.Box.: 81082, Dubai, [email protected]

INDIA

ADON Contractor & InteriorTel .: 0091 484 2533034, Fax.: 0091 484 2533035,Vytila, Kochi, Kerala, [email protected]

QATAR

MECHON Trading & ContractingTel .: 00974 44123667Fax.: 00974 44816343P.O.Box 201609,Doha, [email protected]

OMAN

Advance Technical SolutionTel.: 00968 24798877,Fax: 00968 24798844,P.o.Box.: 203, Postal Code: 117Wadi Kabir, Sultanate of Omanadvancetech@@@advancemain.com

TECHNICAL SOLUTION LLC

Our Activities

Project Management

Engineering

Procurement

Construction

Electro Mechanical

Steel Structure & Piping

Storage Tanks and Vessels

Oman - Tel .: 00968 24798877, India - Tel .: 0091 484 2533034, Dubai - Tel .: 00971 4 2344772, Qatar - Tel .: 00974 44123667 Fax.: 00968 24798844, Fax.: 0091 484 2533035, Fax.: 00971 4 2344996, Fax.: 00974 44816343

MECHONTrading & Contracting TECHNICAL SOLUTION LLC

Sl.No CONTENTS SESSION

01. Introduction 01

02. Project Management 02

03. Procurement 03

04. Steel Structure & Metal Construction 04

05. Oil & Gas, Aviation /Marine Sector 05

06. Safety 06

07. Illustrations of Structural Steel Works 07

08. List of Latest Projects 08

09. Prestigious List of Clients 09

10. Prestigious List of Consultants 10

11. Organizational chart 11

- Industrial Equipment Spares Trading

Sl.No CONTENTS SESSION

01 Introduction01. Introduction 0101

02. Project Management 02

03. Procurement 03

04. Steel Structure & Metal Construction 04

05. Oil & Gas, Aviation /Marine Sector 05r

06. Safety 06

07. Illustrations of Structural Steel Works 07

08. List of Latest Projects 08

09. Prestigious List of Clients 09

10. Prestigious List of Consultants 10

11. Organizational chart 11

SafffettyIndustrial Equipment Spares Trading- Industrial Equipment Spares Trading



Section 1INTRODUCTION

Advance Group is an U.A.E based Fabrication Company based at Dubai. Advance Group provides the services for project management, engineer-ing, procurement, steel structure works, construction works, interior Fit outs, MEP works, pipe line related works, storage tank and vessels and Lifts supply and Installation.

Advance Group also undertakes turnkey projects including design and engineering, procurement, project management and coordination. Well-qualifi ed staffs of various disciplines are deployed to provide quality prod-ucts, customer satisfaction and timely delivery.

It is the objective of the management to provide our customers with a ser-vice and product quality second to none.

01

Section 1INTRODUCTION

Advance Group is an U.A.E based Fabrication Company based at Dubai.Advance Group provides the services for project management, engineer-ing, procurement, steel structure works, construction works, interior Fitouts, MEP works, pipe line related works, storage tank and vessels andLifts supply and Installation.

Advance Group also undertakes turnkey projects including design andengineering, procurement, project management and coordination. Well-qualifi ed staffs of various disciplines are deployed to provide quality prod-ucts, customer satisfaction and timely delivery.

It is the objective of the management to provide our customers with a ser-vice and product quality second to none.

01



Section 2

2. PROJECT MANAGEMENT

It is the stated policy of Advance Group to ensure that all projects are com-pleted in time meeting the project specifi cation, with in the planned budget and customer satisfaction.

Prepare of project plan, preparation of applicable procedures, survey the avail-able and required resources, preparation of the statistical reports regarding to progress, design, procurement, manpower, resources, material fabrication, etc.

Preparation of quality plan inspection test plans as per the standards.

Implement and there after monitor quality plan and inspection test plan.

Monitor the project plan as per the schedules and monitor the costing over the project.

Decide and there after implement continual improvement plans for the smooth completion of project.

02

Section 2

2. PROJECT MANAGEMENT

It is the stated policy of Advance Group to ensure that all projects are com-pleted in time meeting the project specifi cation, with in the planned budget and customer satisfaction.

Prepare of project plan, preparation of applicable procedures, survey the avail-able and required resources, preparation of the statistical reports regardingto progress, design, procurement, manpower, resources, material fabrication,etc.

Preparation of quality plan inspection test plans as per the standards.

Implement and there after monitor quality plan and inspection test plan.

Monitor the project plan as per the schedules and monitor the costing over the project.

Decide and there after implement continual improvement plans for the smooth completion of project.

02



3. PROCUREMENT

The procurement procedure we follow one as bellow

Preparation of suppliers list and forwarding to clients/consultant’s for ap-proval wherever required.

Forwarding the requirement for approval of products also to determine and implement inspection and other activities necessary to ensure that pur-chased product meets specifi ed purchase requirements.

Expedite quotations, carry out fi nancial evaluations and forwarding the technical evaluations for clients/consultant’s approval.

Carry out negotiation with selected vendors in respect of price, delivery terms, Payment terms, penalty conditions and inspection procedures, etc.

Carry out supplier selection and evaluate over the new and existing ven-dors involved in the project.

Forwarding all the documentation like supplier, drawings, Material test cer-tifi cates for client/consultant approval.

Preparing and expediting schedule for various stages such as raw material procurement, fabrication, Joinery and assembly dispatch etc.

Decide expediting priorities according to schedule criticality and continu-ously update according to supplier performance and construction prog-ress.

Up date the status by visiting all local suppliers.

Offi ce expedite by means of fax, mail and telephone with all overseas sup-pliers.

Plan, monitor and arrange all major and urgent shipments to site.

Establish and maintain on a continuous basis material status report indicat-ing up-to-date delivery dates promised in relation to original promises and fi eld requirement.

01).

02).

03).

04).

05).

06).

07).

08).

09).

10).

11).

12).

03

3. PROCUREMENT

The procurement procedure we follow one as bellow

Preparation of suppliers list and forwarding to clients/consultant’s for ap-proval wherever required.

Forwarding the requirement for approval of products also to determine and implement inspection and other activities necessary to ensure that pur-chased product meets specifi ed purchase requirements.

Expedite quotations, carry out fi nancial evaluations and forwarding the technical evaluations for clients/consultant’s approval.

Carry out negotiation with selected vendors in respect of price, deliveryterms, Payment terms, penalty conditions and inspection procedures, etc.

Carry out supplier selection and evaluate over the new and existing ven-dors involved in the project.

Forwarding all the documentation like supplier, drawings, Material test cer-tifi cates for client/consultant approval.

Preparing and expediting schedule for various stages such as raw material procurement, fabrication, Joinery and assembly dispatch etc.

Decide expediting priorities according to schedule criticality and continu-ously update according to supplier performance and construction prog-ress.

Up date the status by visiting all local suppliers.

Offi ce expedite by means of fax, mail and telephone with all overseas sup-pliers.

Plan, monitor and arrange all major and urgent shipments to site.

Establish and maintain on a continuous basis material status report indicat-ing up-to-date delivery dates promised in relation to original promises and fi eld requirement.

01)).

00002222).

00333)))..

04).

00555))).

00666)))).

07).

08).

09).

10).

11).

12).

03



04

4 STEEL STRUCTURE & METAL CONSTRUCTION

4.1 DESIGN AND DEVELOPMENT

All basic design and development shall be planned and controlled in projects.

During the design and development planning, the stages of design and development shall be identifi ed & determined.

Review, verifi cation and validation that are appropriate to each design and development stage shall be carried out by our qualifi ed designers.

Design interfaces shall be managed by effective communication and clear written assign-ments and documentation.

Design inputs regarding the product requirements shall be carefully reviewed with functional and performance requirements by the designer.

Applicable statutory and regulatory requirement shall be followed during the design and de-velopment process.

All the design outputs of the product shall be reviewed with the product requirements and specifi cations.

Design out puts shall specify the characteristics of the product that are essential for its safe factor and proper use.

Advance Group under take design of steel structures as per BS 5950, pressure vessels as per ASME sec VII & API 650, storage tanks, soils, off shore baskets, skids and various fab-ricated components.

Advance Group also under take pipe line design services as per American codes ANSI B31.3, ANSI B31.1, ANSI B31.4, ANSI B31.8 & other international standards as required by the client.

Advance Group construction under takes preparation of Design drawings and detailed fabri-cation drawings as per client’s requirements

Detailed bill of quantities fabrication sequences and erection sequences are prepared during execution of projects.

A detailed As built drawings is prepared and submitted to client approval on completion of every project.

4.2 FABRICATION & ERECTION

4.2.a. Pipe Works

We under take fabrication and erection of all types of pipework as per international codes in the following materials:-Cast iron

04

4 STEEL STRUCTURE & METAL CONSTRUCTION

4.1 DESIGN AND DEVELOPMENT

All basic design and development shall be planned and controlled in projects.

During the design and development planning, the stages of design and development shall be identifi ed & determined.

Review, verifi cation and validation that are appropriate to each design and development stage shall be carried out by our qualifi ed designers.

Design interfaces shall be managed by effective communication and clear written assign-ments and documentation.

Design inputs regarding the product requirements shall be carefully reviewed with functionaland performance requirements by the designer.

Applicable statutory and regulatory requirement shall be followed during the design and de-velopment process.

All the design outputs of the product shall be reviewed with the product requirements and specifi cations.

Design out puts shall specify the characteristics of the product that are essential for its safefactor and proper use.

Advance Group under take design of steel structures as per BS 5950, pressure vessels as per ASME sec VII & API 650, storage tanks, soils, off shore baskets, skids and various fab-ricated components.

Advance Group also under take pipe line design services as per American codes ANSIB31.3, ANSI B31.1, ANSI B31.4, ANSI B31.8 & other international standards as required bythe client.

Advance Group construction under takes preparation of Design drawings and detailed fabri-cation drawings as per client’s requirements

Detailed bill of quantities fabrication sequences and erection sequences are prepared duringexecution of projects.

A detailed As built drawings is prepared and submitted to client approval on completion ofevery project.

4.2 FABRICATION & ERECTION

4.2.a. Pipe Works

We under take fabrication and erection of all types of pipework as per international codes in the following materials:-Cast iron



04.01

Carbon steel (Including l.t,)Alloy steelGalvanizedAluminumCopper and BronzeStainless Steel.

4.2.b. Process and utility piping for;-Oil industry (both onshore & offshore)Petrochemical/chemical plantsFertilizer and industrial plantsPower plantsChilled water, domestic water, fi rewater etc.

4.2.c. Standard & Codes used - ANSI B31.3/B31.1- ANSI B31.4/B31.8- BS 3351- ASME SECTION IX, API 1104CLIENT’S SPECIFICATIONS.

4.2.d. Structural steel work

Advance Group under take fabrication and installation of structural steel works including Preengineered Steel for industrial buildings, ware house, Fuel stations, shopping malls, Refi nery structures, Pipe supports , Hand railing, Access plat forms, conveyor frames, Sub structure, ladders, Skylight, Cinema Seatings, etc.

A detailed cutting list is prepared and issued by the Engineering department to production department.

Production (Fabrication) department shall follow the production plan strictly and sequences of fabrication are also followed by production.

Material shall be verifi ed for grade and specifi cations prior to starting of any fabrication job.

If required (Client request) heat number of the raw material shall be transferred to the cut lengths as punch markings.

In process inspection shall be carried out by the quality controller for the process involved.

Each product fabricated shall be checked for conformity by the quality controller prior to weld-ing.

Welding shall be carried out as per the project requirements and as per the approved welding procedures.

A Visual weld inspection shall be carried out on the completion of welding by the quality con-troller.

04.01

Carbon steel (Including l.t,)Alloy steelGalvanizedAluminumCopper and BronzeStainless Steel.

4.2.b. Process and utility piping for;-Oil industry (both onshore & offshore)Petrochemical/chemical plantsFertilizer and industrial plantsPower plantsChilled water, domestic water, fi rewater etc.

4.2.c. Standard & Codes used- ANSI B31.3/B31.1- ANSI B31.4/B31.8- BS 3351- ASME SECTION IX, API 1104CLIENT’S SPECIFICATIONS.

4.2.d. Structural steel work

Advance Group under take fabrication and installation of structural steel works includingPreengineered Steel for industrial buildings, ware house, Fuel stations, shopping malls, Refi nery structures, Pipe supports , Hand railing, Access plat forms, conveyor frames, Substructure, ladders, Skylight, Cinema Seatings, etc.

A detailed cutting list is prepared and issued by the Engineering department to productiondepartment.

Production (Fabrication) department shall follow the production plan strictly and sequences of fabrication are also followed by production.

Material shall be verifi ed for grade and specifi cations prior to starting of any fabricationjob.

If required (Client request) heat number of the raw material shall be transferred to the cut lengths as punch markings.

In process inspection shall be carried out by the quality controller for the process involved.

Each product fabricated shall be checked for conformity by the quality controller prior to weld-ing.

Welding shall be carried out as per the project requirements and as per the approved weldingprocedures.

A Visual weld inspection shall be carried out on the completion of welding by the quality con-troller.



04.02

Any Non Destructive testing required shall be carried out as per the contract / specifi cation by the approved third parties.

All such reports shall be forwarded to client, consultant’s approval.

If required the fabricated components shall be assembled and checked for conformity, prior to blasting and painting.

All fi nished components shall be stacked clearly with wooden timbers or as per the site re-quirements.

Prior to any erection, the foundation levels shall be checked.

Personnel working at site shall strictly follow the site safety requirements.



Adequate and proper slings belts shall be used in the erection of steel structures.

Structures erected shall be aligned and adequate torque shall be applied in the fastening ar-eas as per the specifi cations.

4.2.e. Mechanical Equipment

We undertake installation, alignment and pre-commissioning of pumps, vessels, compres-sors, blowers, diesel engines, turbines, agitators and other equipment.

4.2.f. Tanks & Vessels

Presently Advance Group provides services for the fabrication and installation of vertical and horizontal storage tanks specially for the storage of diesel, chemicals, water for Construction, Transport, Power plants, Poultry & Food industries.

4.3. PAINTING

4.3.a. General

Advance Group has fully equipped painting shop to carry out all type of industrial epoxy coat-ing like painting of new structure, pipe work, tanks and vessels and repair and refurbish exist-ing structure etc.

4.3.b. Surface Preparation

Advance Group has facilities to prepare surface up to Swedish standard SA3 (British stan-dard fi rst Quality) by using grit blasting. We also provide services to carry out water blasting, chemical cleaning, power tool cleaning and pickling etc.

04.02

Any Non Destructive testing required shall be carried out as per the contract / specifi cation bythe approved third parties.

All such reports shall be forwarded to client, consultant’s approval.

If required the fabricated components shall be assembled and checked for conformity, priorto blasting and painting.

All fi nished components shall be stacked clearly with wooden timbers or as per the site re-quirements.





Adequate and proper slings belts shall be used in the erection of steel structures.

Structures erected shall be aligned and adequate torque shall be applied in the fastening ar-eas as per the specifi cations.

4.2.e. Mechanical Equipment

We undertake installation, alignment and pre-commissioning of pumps, vessels, compres-sors, blowers, diesel engines, turbines, agitators and other equipment.

4.2.f. Tanks & Vessels

Presently Advance Group provides services for the fabrication and installation of vertical and horizontal storage tanks specially for the storage of diesel, chemicals, water for Construction,Transport, Power plants, Poultry & Food industries.

4.3. PAINTING

4.3.a. General

Advance Group has fully equipped painting shop to carry out all type of industrial epoxy coat-ing like painting of new structure, pipe work, tanks and vessels and repair and refurbish exist-ing structure etc.

4.3.b. Surface Preparation

Advance Group has facilities to prepare surface up to Swedish standard SA3 (British stan-dard fi rst Quality) by using grit blasting. We also provide services to carry out water blasting,chemical cleaning, power tool cleaning and pickling etc.



04.03

4.3.c. Painting

Advance Group have experienced staff who are able to carry out the work to comply the painting / coating system in accordance with client’s requirements / manufactures recom-mendations by using air less spray or conventional methods.

4.4. QUALITY CONTROL & QUALITY ASSURANCE

4.4.a. General

This section describes the quality control and inspection procedures related to our fabrica-tion and construction activities at the fabrication shop and construction projects, We have our own quality system to implement Quality control / assurance for each project and also we nominate third party to carry out inspections other than client’s inspection. All non-destructive testing like Ultra testing, Radiographic Testing, Magnetic Particle Testing, Penetrant Testing shall be carried out by the approved third parties we recommend .

4.4.b. Material Receiving

All in coming material shall be checked for conformity by the storekeeper.

All in coming material shall be checked for conformance with the purchase order and as per project specifi cations.

All in coming material shall be stored separately property register shall be maintained.

Any client-supplied material a customer supplied from general stock.

Copy of material test certifi cates and inspection details shall be forward to the quality control-ler for review and approval.

All material test certifi cates shall be forwarded by he quality controller to client approval (If Required ) Prior to fabrication.

4.4.c. Non-Conforming Material

Material which do not conform to the requirement will be identifi ed by red tags. The tags will carry the identifi cation and reason for non-conformance and will be moved to a ‘hold area’ A non-conformance report will be prepared with all details. It will be signed by quality control-ler.

A corrective action shall be taken by the quality controller to get the material approved by a concession request or the material shall be rejected and sent back to the supplier.

4.4.d. Material Issue

All material will be issued against a duly authorized material indent indicating location, Job reference, material identifi cation, drawing reference and quantity required. Whenever cutting sketch number will also be included.

04.03

4.3.c. Painting

Advance Group have experienced staff who are able to carry out the work to comply the painting / coating system in accordance with client’s requirements / manufactures recom-mendations by using air less spray or conventional methods.

4.4. QUALITY CONTROL & QUALITY ASSURANCE

4.4.a. General

This section describes the quality control and inspection procedures related to our fabrica-tion and construction activities at the fabrication shop and construction projects, We have our own quality system to implement Quality control / assurance for each project and also we nominate third party to carry out inspections other than client’s inspection. All non-destructive testing like Ultra testing, Radiographic Testing, Magnetic Particle Testing, Penetrant Testingshall be carried out by the approved third parties we recommend .

4.4.b. Material Receiving

All in coming material shall be checked for conformity by the storekeeper.

All in coming material shall be checked for conformance with the purchase order and as per project specifi cations.

All in coming material shall be stored separately property register shall be maintained.

Any client-supplied material a customer supplied from general stock.

Copy of material test certifi cates and inspection details shall be forward to the quality control-ler for review and approval.

All material test certifi cates shall be forwarded by he quality controller to client approval (IfRequired ) Prior to fabrication.

4.4.c. Non-Conforming Material

Material which do not conform to the requirement will be identifi ed by red tags. The tags will carry the identifi cation and reason for non-conformance and will be moved to a ‘hold area’ A non-conformance report will be prepared with all details. It will be signed by quality control-ler.

A corrective action shall be taken by the quality controller to get the material approved by a concession request or the material shall be rejected and sent back to the supplier.

4.4.d. Material Issue

All material will be issued against a duly authorized material indent indicating location, Job reference, material identifi cation, drawing reference and quantity required. Whenever cuttingsketch number will also be included.



04.04

Material indent will be prepared for fabrication construction supervisor and to the store-keeper.

Materials will be issued and developed to predetermined location at site or shop, maintaining tractability of materials.

4.4.e. Return of Materials

Balance Material shall be returned to the stores through Material Return note. Such Material shall be clearly identifi ed by the stores.

4.4.f.Quality Plan

A quality plan shall be prepared supported by the Inspection and Test Plan by prepared the Quality Controller.

Inspection and Test Plan shall clearly indicate Inspection Details, Hold points, Document Ap-proval, 100 % Inspection, Surveillance, appropriate codes and standards, controlling docu-ment, approval requirement and document Review details.

Production supervisor shall strictly follow the quality Plan and Inspection and Test Plan. In process Inspection shall be carried out by the quality Controller and Recorded.

A Visual weld inspection shall be carried out by the Quality controller.

4.4.g. Fabrication

Detailed cutting schedules and plans will be prepared by the fabrication supervisor and shall be checked and verifi ed by the quality controller before commencement of any cutting op-eration.

After marking materials as per cutting plans, material identifi cation numbers, part number or item number and drawing number will be marked in each cut length.

Quality controller will check and verify each cut length for dimensions and marking before any cutting operation.

All weld fi t ups will be inspected and approved by Quality controller before welding.

Any fi t up not complying to specifi cation / drawings / fabrication tolerances and design re-quirement will be treated as non-conformance to quality control requirement and will be sent for rectifi cation and informed to concerned site supervisor / site engineer / fabrication super-visor through a non conformance report.

Dimension before and after welding will be checked recorded and controlled to achieve drawing dimensions by the Quality Controller.The dimensional check involves level check, straightness check and dimension check.

Welding shall be carried out as per approved welding procedures and by approved weld-ers.

04.04

Material indent will be prepared for fabrication construction supervisor and to the store-keeper.

Materials will be issued and developed to predetermined location at site or shop, maintainingtractability of materials.

4.4.e. Return of Materials

Balance Material shall be returned to the stores through Material Return note. Such Material shall be clearly identifi ed by the stores.

4.4.f.Quality Plan

A quality plan shall be prepared supported by the Inspection and Test Plan by prepared the Quality Controller.

Inspection and Test Plan shall clearly indicate Inspection Details, Hold points, Document Ap-proval, 100 % Inspection, Surveillance, appropriate codes and standards, controlling docu-ment, approval requirement and document Review details.

Production supervisor shall strictly follow the quality Plan and Inspection and Test Plan. In process Inspection shall be carried out by the quality Controller and Recorded.

A Visual weld inspection shall be carried out by the Quality controller.

4.4.g. Fabrication

Detailed cutting schedules and plans will be prepared by the fabrication supervisor and shall be checked and verifi ed by the quality controller before commencement of any cutting op-eration.

After marking materials as per cutting plans, material identifi cation numbers, part number oritem number and drawing number will be marked in each cut length.

Quality controller will check and verify each cut length for dimensions and marking beforeany cutting operation.

All weld fi t ups will be inspected and approved by Quality controller before welding.

Any fi t up not complying to specifi cation / drawings / fabrication tolerances and design re-quirement will be treated as non-conformance to quality control requirement and will be sent for rectifi cation and informed to concerned site supervisor / site engineer / fabrication super-visor through a non conformance report.

Dimension before and after welding will be checked recorded and controlled to achieve drawing dimensions by the Quality Controller.The dimensional check involves level check, straightness check and dimension check.

Welding shall be carried out as per approved welding procedures and by approved weld-ers.



04.05

Constant monitoring of the welding techniques employed during fabrication will be carried out to check and control quality of production welds.

4.4.h. Rectifi cation Due to Non-Conformance

Any item to be rectifi ed due to non-conformance will be identifi ed properly. All rectifi cation will be performed as per approved procedures and code requirements under the surveil-lance of Quality controller.

4.4.i. Inspection Request

A formal inspection request shall be forwarded to the quality controller by the site engineer / Fabrication Supervisor in regarding any testing of inspection.

4.4.j. Documentation

A Dimensional inspection report / Visual weld inspection report fi nal inspection report shall be forward to client on the fi nal documentation

4.4.k. Welding Control

All the fabricated and erected items will comply with the project specifi cation & welding re-quirements as per the applicable codes and specifi cations.

All welding procedures, welders and welding operations will be qualifi ed as per applicable codes like ASME SEC IX, AWS D1.1, BS or project specifi cations.

4.4.l. Welding Procedures

Required welding Procedure Specifi cation shall be prepared by the Quality Controller and Procedure qualifi cations and welders qualifi cation shall be conducted as per the project / Client Requirements.

When welding procedures are readily available from earlier project fi les, Quality Controller will select and compile required procedures and redocument them for the project.

All Approved welding procedure will be sent to client’s engineers for review and approval.

4.4.m. Welding Performance Qualifi cations

All welder and welding operators employed for the project will be qualifi ed as per applicable codes and specifi cation requirements.

Quality controller shall be responsible for the application of specifi c procedures for welder qualifi cation.

All wqt records shall be forward to client for approval

All welders will be assigned with identity number. This number will be punched or marked next to the weld to identify the welds done by individual welders.

04.05

Constant monitoring of the welding techniques employed during fabrication will be carried out to check and control quality of production welds.

4.4.h. Rectifi cation Due to Non-Conformance

Any item to be rectifi ed due to non-conformance will be identifi ed properly. All rectifi cation will be performed as per approved procedures and code requirements under the surveil-lance of Quality controller.

4.4.i. Inspection Request

A formal inspection request shall be forwarded to the quality controller by the site engineer /Fabrication Supervisor in regarding any testing of inspection.

4.4.j. Documentation

A Dimensional inspection report / Visual weld inspection report fi nal inspection report shallbe forward to client on the fi nal documentation

4.4.k. Welding Control

All the fabricated and erected items will comply with the project specifi cation & welding re-quirements as per the applicable codes and specifi cations.

All welding procedures, welders and welding operations will be qualifi ed as per applicable codes like ASME SEC IX, AWS D1.1, BS or project specifi cations.

4.4.l. Welding Procedures

Required welding Procedure Specifi cation shall be prepared by the Quality Controller and Procedure qualifi cations and welders qualifi cation shall be conducted as per the project /Client Requirements.

When welding procedures are readily available from earlier project fi les, Quality Controllerwill select and compile required procedures and redocument them for the project.

All Approved welding procedure will be sent to client’s engineers for review and approval.

4.4.m. Welding Performance Qualifi cations

All welder and welding operators employed for the project will be qualifi ed as per applicablecodes and specifi cation requirements.

Quality controller shall be responsible for the application of specifi c procedures for welderqualifi cation.

All wqt records shall be forward to client for approval

All welders will be assigned with identity number. This number will be punched or marked next to the weld to identify the welds done by individual welders.



04.06

4.4.n. Welding Records

A welding protocol shall be maintained by the quality controller and for warded during the fi nal documentation.

4.4.o. Welding Equipment

All welding equipment will be periodically checked by the maintenance department.All welding cables, grinding machines, gouging torches, SMAW and GMAW torches, cutting equipment and other accessories will be kept in good order by period maintenance.

Safety regulation during operation of each welding equipment will be brought to continuous attention of welders and welding operators.

4.4.p. Welding Consumable :

ALL WELDING CONSUMABLE WILL COMPLY WITH THE REQUIREMENTS OF CODES AND PROJECT SPECIFICATION

All electrodes shall be baked in baking ovens and transferred to holding ovens as per manu-factures recommendations.

All welding consumable shall be stored as per the manufactures recommendations.

Batch test certifi cates of the electrodes shall be forwarded to the client with the fi nal docu-mentation.

Fabrication supervisor / Site engineer will be responsible for maintaining quality level of welding consumable and controlling the issue and retrieval of electrodes.

4.4.q. Non- Destructive Testing Control

All Non Destructive testing shall be done by an approve third party nominated by the client or by the Advance City Steel Contracting.

Prior to appointing any third party client’s approval shall be obtained.

Any failure and observations occurred during N.D.T. shall be recorded in the Non –confor-mance report and corrective action shall be taken by the quality controller.

A re N.D.T inspection shall be carried out by the Third Party for conformity.

All the Non-destructive testing reports shall be forward to the client with the fi nal documenta-tion.

4.4.r. Final Documentation

All N.D.T reports including non-conformance reports will from part of the fi nal documenta-tion.

04.06

4.4.n. Welding Records

A welding protocol shall be maintained by the quality controller and for warded during the fi nal documentation.

4.4.o. Welding Equipment

All welding equipment will be periodically checked by the maintenance department.All welding cables, grinding machines, gouging torches, SMAW and GMAW torches, cuttingequipment and other accessories will be kept in good order by period maintenance.

Safety regulation during operation of each welding equipment will be brought to continuous attention of welders and welding operators.

4.4.p. Welding Consumable :

ALL WELDING CONSUMABLE WILL COMPLY WITH THE REQUIREMENTS OF CODES AND PROJECT SPECIFICATION

All electrodes shall be baked in baking ovens and transferred to holding ovens as per manu-factures recommendations.

All welding consumable shall be stored as per the manufactures recommendations.

Batch test certificates of the electrodes shall be forwarded to the client with the fi nal docu-mentation.

Fabrication supervisor / Site engineer will be responsible for maintaining quality level ofwelding consumable and controlling the issue and retrieval of electrodes.

4.4.q. Non- Destructive Testing Control

All Non Destructive testing shall be done by an approve third party nominated by the client or by the Advance City Steel Contracting.

Prior to appointing any third party client’s approval shall be obtained.

Any failure and observations occurred during N.D.T. shall be recorded in the Non –confor-mance report and corrective action shall be taken by the quality controller.

A re N.D.T inspection shall be carried out by the Third Party for conformity.

All the Non-destructive testing reports shall be forward to the client with the fi nal documenta-tion.

4.4.r. Final Documentation

All N.D.T reports including non-conformance reports will from part of the fi nal documenta-tion.



04.07

All N.D.T result like radiographs will be kept in safe storage for a period stipulated in the applicable codes and specifi cation. All result will be traceable by proper records at any time during that period.

All N.D.T result like radiographs will be kept in safe storage for a period stipulated in the applicable codes and specifi cation. All result will be traceable by proper records at any time during that period.

Final documentation shall include Raw material approvals / Approve welding procedure / Consumable certifi cates / Dimensional inspection report / Paint inspection report / Final inspection report etc.

4.4.s. Heat Treatment

When heat treatment is involved in projects Advance City Steel Contracting nominates ap-proved third parties to carry out heat treatment.

4.4.t. Pressure Testing

The equipment and piping that will be fabricated and erected will be required to meet all pressure testing requirements of applicable codes and project.

All pressure testing will be performed in accordance with approved procedures.

4.4.u.Testing Procedures

Quality controller will prepare written procedure in accordance with project specifi cations and codes, will be reviewed and approved by client.

All results shall be recorded in pressure testing report. If required third party shall be nomi-nated to witness the pressure testing.

4.4.v. Pressure Testing

The fabrication supervisor / site engineer will be responsible for ensuring the application of correct pressure testing procedure. Quality assurance inspector will approve the correct-ness of the procedure to the applied and any non-conformity will be reported to the supervi-sor for corrective measures.

Quality controller will check the system prior to pressure testing along with fabrication su-pervisor / Site engineer and review all N.D.T and other inspection documents and ensure that the system is acceptable for pressure testing.

Quality controller along with fabrication supervisor / site engineer will witness the pressure testing, conduct required test at pressure holding period and approve the necessary.

The fabrication supervisor will prepare a pressure testing record and attach the pressure chart, which will be reviewed and approved by quality assurance inspector before submitting to authorized inspector for acceptance.

04.07

All N.D.T result like radiographs will be kept in safe storage for a period stipulated in theapplicable codes and specifi cation. All result will be traceable by proper records at any timeduring that period.

All N.D.T result like radiographs will be kept in safe storage for a period stipulated in theapplicable codes and specifi cation. All result will be traceable by proper records at any timeduring that period.

Final documentation shall include Raw material approvals / Approve welding procedure/ Consumable certifi cates / Dimensional inspection report / Paint inspection report / Finalinspection report etc.

4.4.s. Heat Treatment

When heat treatment is involved in projects Advance City Steel Contracting nominates ap-proved third parties to carry out heat treatment.

4.4.t. Pressure Testing

The equipment and piping that will be fabricated and erected will be required to meet allpressure testing requirements of applicable codes and project.

All pressure testing will be performed in accordance with approved procedures.

4.4.u.Testing Procedures

Quality controller will prepare written procedure in accordance with project specifi cationsand codes, will be reviewed and approved by client.

All results shall be recorded in pressure testing report. If required third party shall be nomi-nated to witness the pressure testing.

4.4.v. Pressure Testing

The fabrication supervisor / site engineer will be responsible for ensuring the application ofcorrect pressure testing procedure. Quality assurance inspector will approve the correct-ness of the procedure to the applied and any non-conformity will be reported to the supervi-sor for corrective measures.

Quality controller will check the system prior to pressure testing along with fabrication su-pervisor / Site engineer and review all N.D.T and other inspection documents and ensurethat the system is acceptable for pressure testing.

Quality controller along with fabrication supervisor / site engineer will witness the pressuretesting, conduct required test at pressure holding period and approve the necessary.

The fabrication supervisor will prepare a pressure testing record and attach the pressurechart, which will be reviewed and approved by quality assurance inspector before submittingto authorized inspector for acceptance.



04.08

4.4.W. Surface Preparation, Painting & Coating

The equipment, piping and structures that requires painting after fabrication will be surf ace prepared, painted or coated as required by applicable codes, and project specifi cations.

All blasting, painting or coating operations will be performed as per manufactures recommen-dations.

Quality controller will be responsible for monitoring and conduct paint inspection in coordina-tion with client and paint manufacturers inspector.

4.4.X. Storage of Consumable

All painting consumable shall be strictly stored as per the manufacturers recommendations.

4.4.Y. Documentation

A paint inspection report shall be prepared by he quality controller and forwarded to client as part of fi nal documentation.

4.4.Z. Final Inspection & Documentation

A fi nal inspection shall be carried out by the quality controller and recorded in the fi nal inspec-tion report as per the project specifi cations and contract.

4.4.A1. Final Documentation

Final documentation shall include Raw material approvals / Approve welding procedure / Con-sumable certifi cate / Dimensional inspection report / Paint inspection / Final inspection report etc.

4.5. WORKSHOP, PLANT & EQUIPMENT

Advance Group workshop located in Ajman new industrial area is operating in 16000 sq feet of covered area.

The fabrication shop is equipped with profi le CH Cutting Machine, Cutting Machine, Milling, Shaping, Drilling, Tig, Submerged arc machine, Welding generators, Fixtures, Hand tools etc, We under take various fabrication works as mentioned in section 1 of this document.

04.08

4.4.W. Surface Preparation, Painting & Coating

The equipment, piping and structures that requires painting after fabrication will be surf ace prepared, painted or coated as required by applicable codes, and project specifi cations.

All blasting, painting or coating operations will be performed as per manufactures recommen-dations.

Quality controller will be responsible for monitoring and conduct paint inspection in coordina-tion with client and paint manufacturers inspector.

4.4.X. Storage of Consumable

All painting consumable shall be strictly stored as per the manufacturers recommendations.

4.4.Y. Documentation

A paint inspection report shall be prepared by he quality controller and forwarded to client as part of fi nal documentation.

4.4.Z. Final Inspection & Documentation

A fi nal inspection shall be carried out by the quality controller and recorded in the fi nal inspec-tion report as per the project specifi cations and contract.

4.4.A1. Final Documentation

Final documentation shall include Raw material approvals / Approve welding procedure / Con-sumable certifi cate / Dimensional inspection report / Paint inspection / Final inspection report etc.

4.5. WORKSHOP, PLANT & EQUIPMENT

Advance Group workshop located in Ajman new industrial area is operating in 16000 sq feetof covered area.

The fabrication shop is equipped with profi le CH Cutting Machine, Cutting Machine, Milling,Shaping, Drilling, Tig, Submerged arc machine, Welding generators, Fixtures, Hand tools etc, We under take various fabrication works as mentioned in section 1 of this document.



05. Oil & Gas, Aviation / Marine Sector - Industrial Equipment Spares Trading

Industrial Spare Parts Trading L.L.C, the growing arm of the Advance Group, set up with the prime objective of representing reputed market-leading brands, is fl ourishing in the toughest of market conditions. The company sup-plies Industrial Equipment spares and certifi ed fabricated modules used in Oil & Gas Upstream, Aviation Downstream and the Marine Sectors.

We have a huge and established business network all across the UAE, Oman, Qatar & India. Backed by knowledge and rich experience, we are gradually achieving a strong foothold among customers in these countries in our core areas. Unlike general trading companies, we focus on the total needs of our clients and always emphasize service and prompt solutions for critical purchas-ing requirements.

Our VisionOwing to the dictum to serve with quality products, our primary vision is ‘Cater-ing to the exact expectations of our clients’ thus to become a safe and reliable partner keeping pace with fast changing industrial technologies.

AchievementsThe company has set a new benchmark of excellence by meeting the require-ments of our customers & facilitating where required with customized products and prompt services. Adopting ethical business practices, we have earned loads of accolades in the market, thus outpaced our competitors and earned the repu-tation of being a partner of choice.

also offers customized fabricated products that is commonly used in Oil & Gas, aviation and marine sectors. Our strong infrastructure consists of experi-enced Fabrication / Structural Design & Engineering teams. We have developed ergonomic & safe refuelling ladders, Aviation Refuelling support accessories, Offshore Cargo Carry baskets, Skids etc, making our mark in the customised products segment.

05

05. Oil & Gas, Aviation / Marine Sector - Industrial Equipment Spares Trading

Indddustrial Spare Parts Trading L.L.C, the growing arm of the AdvanceGGGGroupp,, seeeet uuup with the prime objective of representing reputed market-leadingbbrraandsss,, issss flflfloourishing in the toughest of market conditions. The company sup-plies Innddddusssstrrriiial Equipment spares and certifi ed fabricated modules used in Oil& Gas UUUUppsssttttreeeeam, Aviation Downstream and the Marine Sectors.

WWWWe have aaaa huuuuggeeee and established business network all across the UAE, Oman,QQQQaaaattttaar & Inddddiia. BBBBaaaacked by knowledge and rich experience, we are graduallyaacccchhhhiiieeeevvving a sssstttroonnnngggg fffoothold among customers in these countries in our coreaaareaaaassss.. UUUUnlike gggeeeeneeerrrraaallll ttrading companies, we focus on the total needs of ourcliieeennntts aaaannnndddd aalwayyssss eempppphhhhaaaassize service and prompt solutions for critical purchas-innggg rrreeqqquuuiireeemmmmeeeennnntts.

Our VisionOwing to the dicttuuummm tttooo serrvvveeee wwwwiitth quaalllliiiittttyyyy pppprrrooducts, our primary vision is ‘Cater-iiinnnggg tttoo the exact expecctttaaatttiiiooonnnsss of ourr ccclllliiiieeeennnnttttssss’ ttthhuus tttoo bbbbeeccooommmmeeee aaa ssafe and reliablepparttnneeerrr kkkeeeeepping pace with fassttt ccchhhaaannngggiiinnnggg iinndduussttrriiaall tteechnologies.

AAAAccchhhiiiieeeevvveeemmmmeeeenttssTTThhhe cccoooommmpanyy hhhhaaasss sseeettt aa nnneew benchmark of excellence by meeting the require-meennnnttttssss of ooouuuurr custttoooommmmeeeerrrs &&& ffaaccciiilliitating where required with customized productsand proooommmmppppt seeerrrrvvvices. AAAAddddoooopppptiinnggg etthhhiiicccaaal business practices, we have earned loadsof accoladdddeeeessss iin ttthhhhee markkkkeeeetttt,, tttthhhuss ooouutpacceeeddd oour competitors and earneedd the repu-tation of beinnnngggg aaaa ppaaaartner offff cccchhhhooooiiicce.

also offeeerrrss cccuusssstomizedd ffffaaabbbbrriiiiccccaatedd ppprroducts that is ccoommonly useed in Oil& Gas, aviation annnndd mmmaaaarrine sectoooorrrss.. OOOuuuurr stronnggg iinfrastrucctture consistss ooff experi-enced Fabrication //// SSSttttruucccctural Dessiiiiggggnnn && EEEEnnnnggineeriinnnggg tteaams. We haavve developedergonomic & safe rrreeefffuuuuellllling ladderrrrsss, AAAAvviatttiiiioooon Refuelllliinngg ssuppppoort accessories,Offshore Cargo Carrrrry bbaaasssketss,, Skiddddsss ettttcccc,, maakkkkiiinng our mark in the customisedproducts segment.

05



Customized Fabrication• Design and fabrication of Offshore Cargo Baskets with all relevant certifi cations.• Fabrication , Supply and installation of Chemical Injection Pumps, Fuel Transfer Pumps, Fluid Manifolds, Fluid Export Pumps, Pneumatic Pumps etc.• Design, Fabrication and assembling of Choke and Kill Manifolds, Back pressure manifolds, Diverter manifolds etc.• Design & fabrication of Atmospheric storage tanks with fl ow line.• Design and Fabrication of API, ANSI Flanged or Unionized Pressure rated pipe joints that include Straights, Elbows and Joints.• Design & fabrication of Coupling lifter, Refuelling Ladders, Bonding Wheels, Lanyard reels which are widely using in the aviation refuelling industry.

[Documentation: We provide Final Assembly drawing, Material Traceability Certifi cates, Cer-tifi cates of Compliance, In house QC reports etc. Where required, Third-party Design verifi -cation, Third-party Final Assembly test review certifi cates are provided]

Supply of Industrial spares• Supply of Consumables & spares for Industrial Engines, Fluid export Pumps, Solid Han-dling Pumps , Reciprocating and Screw Compressors, Power Generators Etc• Supply of various Types and sizes of industrial hoses handling Pneumatic, Hydraulic, Fuel and drilling fl uids.• Supply of Full Range of Filtration systems related to Aviation, Marine and Oil & Gas Indus-try.• Supply of complete Range of Instrumentation, valves, fi ttings, Gauges, Transmitters etc.• Supply of Manual, Hydraulic Operated, Pneumatic Operated Industrial Valves.• Supply of Consumables and Safety items related to Aviation refuelling.

Supply of Safety equipment• Supply of Safety and Personnel Protection Equipment• Supply of Fire Fighting Equipment• Supply of Industrial Gas detectors both Pedestal and Handheld, Calibrated Tools and Gauges.

Supply of General parts• General Industrial Hand tools from leading brands.• Welding consumables, Accessories• Absorbents & Spill control kits

05.01

CCCussttoommmizzzed FFFabrication• DDesignnnn annndnd ffaaaabrication of Offshore Cargo Baskets with all relevant certifi cations.• FFabricccaatioooon ,,, Supply and installation of Chemical Injection Pumps, Fuel Transfer Pumps, FlFFluid Maaanifffofoldddss, Fluid Export Pumps, Pneumatic Pumps etc.•• DDDDesignnnn, FFFaabrrrication and assembling of Choke and Kill Manifolds, Back pressure manifolds,DDiDivvverterr maaaaniffffoolds etc.• DeDesignn & ffffabababrir cation of Atmospheric storage tanks with fl ow line.• Design aaaandddd F FFabaa rication of API, ANSI Flanged or Unionized Pressure rated pipe joints that include Sttrrarar igggghthttsss,s Elbows and Joints.•• Design & f fffababbrirrr cacacaation of Coupling lifter, Refuelling Ladders, Bonding Wheels, Lanyard reels wwhwhwhich are wiwiideddd lyyyly uuusiss ng in the aviation refuelling industry.

[D[DD[Dococococuumumumentationnnn::: WeWeWeWe p p pprorr vide Final Assembly drawing, Material Traceability Certifi cates, Cer-tificacaaatetetetessss ofoo Complplplliaiaiai nccce,e,ee III Innn house QC reports etc. Where required, Third-party Design verifi -cacaatitit on, ThThThThiririrird-ddd party FiFiFiF nall AsAsAsAsseseses mbly test review certifi cates are provided]

Supppplllyyy ooofff IInnnddduuusssstttrial sssppppaaaarresss• Supply offf CoCoConsnsn umummabababbleleleless && spspsppararrresesese forr I Indndustrial Engines, Fluid export Pumps, Solid Han-dling Pumps , ReReeciciciprprproco atinngggg anananndddd ScScS rewww CoCoCoC mpmpressors, Power Generators Etc• Supply of various TyTypepepesss anand siizezeessss ofofofo industrt iaiaiallll hohohohosesesess handling Pneumatic, Hydraulic, Fuel anana ddd drdrd ili ling fl uids.• Supppplylyly o o offf FuFull Range of Filtrationn ss sysysystetetemsmsms r r relelatateded to Aviation, Marine and Oil & Gas Indus-trt y.yy• SuSuppppppplylylyly o o offff cocc mpleeletetete R R Rana ge of Instrumentation, valves, fi ttings, Gauges, Transmitters etc.• SuSuSupppppppplylyly o off Maanunununualall,, HyHyHydrdrd auauaulilic Operated, Pneumatic Operated Industrial Valves.• SuSuSupppppply ooooffff CoC nsummmmabababa leleless ananandd SaSaSafef ty items related to Aviation refuelling.

Supply ooooffff SSSSafeeeettttyyy equiiiippppmmmmeeeentt• Supply of SaSaSaafefeeetytytyty andndnn Personnnnnnnnelelele PP P Proteectctc ion Equiiuipmpmpmene t• Supply of Firee FF F Figggighth innnngggg Equipmmmenenenenttt• Supply of Industststs ririiaalaa GGGGas detectotototorsrsss b bbbotoo h PePePeded stal and Handheld, CCalibrated TTools and Gauges.

Supply of Generallll ppppaaarttttss• General Industrial Hannnnd tot ooolols from leadidiiingn b bbbrandddds.s.ss• Welding consumables,,, A Accccc eeesssorieses• Absorbents & Spill contttroolll kitttss

05.01



6.SAFETY

General Safety Rules

All employees & visitors are required to comply with following.

Obey all warning signs.

Take care that during the performance of their jobs they do not endanger them-selves or others who may be effected by their actions.

Use the correct tools provided for the tasks and do not improvise.

Keep their own work area clean and free from obstructions.

Do not engage in practical jokes or horseplay.

Do not encourage others to take risks.

Do not use compressed air for cleaning clothing or equipment and do not point compressed air for cleaning hoses at any person.

Do not remove guarding from any machine, or modify guards to prevent their operation unless permission has been obtained from a competent person.

Do not touch or use any piece of equipment for which they not had training in its correct use.

Immediately notify their supervisor or their competent of any observed hazard or un safe practice.

06

6.SAFETY

General Safety Rules

All employees & visitors are required to comply with following.

Obey all warning signs.

Take care that during the performance of their jobs they do not endanger them-selves or others who may be effected by their actions.

Use the correct tools provided for the tasks and do not improvise.

Keep their own work area clean and free from obstructions.

Do not engage in practical jokes or horseplay.

Do not encourage others to take risks.

Do not use compressed air for cleaning clothing or equipment and do not pointcompressed air for cleaning hoses at any person.

Do not remove guarding from any machine, or modify guards to prevent their operation unless permission has been obtained from a competent person.

Do not touch or use any piece of equipment for which they not had training inits correct use.

Immediately notify their supervisor or their competent of any observed hazardor un safe practice.

06



0707


07.0107.01

SKYLIGHT STEEL STRUCTURE, RIXOS HOTEL @ PALM JUMEIRAH DUBAI

CANOPY STEEL STRUCTURE, RIXOS HOTEL @ PALM JUMEIRAH DUBAI



07.0207.02



07.0307.03



LONG SPAN ROOF SKYLIGHT, PRIVATE VILLA, AL KHAWANEEJ.

SPIC FERTILIZER, FREE ZONE, JEBAL ALI, DUBAI.

07.04

LONG SPAN ROOF SKYLIGHT, PRIVATE VILLA, AL KHAWANEEJ.

SPIC FERTILIZER, FREE ZONE, JEBAL ALI, DUBAI.

07.04



07.05

AIRMASTER EQUIPMENTS EMIRATES, AJMAN


07.05





07.06

AJMAN CITY CENTER, AJMAN


07.06





07.07

BASKET SHADE SUPPORT STRUCTURE, SHARJAH AQUARIUM


07.07





BASKET SHADE ARCHITECTURAL STRUCTURE, SHARJAH AQUARIUM

GLASS BALCONY BOUNDRY WALL - THE RIXOS HOTEL

07.08

BASKET SHADE ARCHITECTURAL STRUCTURE, SHARJAH AQUARIUM

GLASS BALCONY BOUNDRY WALL - THE RIXOS HOTEL

07.08



07.09

SHADE STRUCTURE - RIXOS HOTEL @ PALM JUMEIRAH DUBAI

07.09

SHADE STRUCTURE - RIXOS HOTEL @ PALM JUMEIRAH DUBAI



WORLD TRADE CENTRE - MARKETING SUITE BUILDING

WORLD TRADE CENTRE - MARKETING SUITE BUILDING

07.10

WORLD TRADE CENTRE - MARKETING SUITE BUILDINGGW

WORLD TRADE CENTRE - MARKETING SUITE BUILDINGGW

07.10



07.11

SKYLIGHT PYRAMID STRUCTURE FOR BANK OF TANZANIA, ZANZIBAR.

AATI WAREHOUSE, AWIR, DUBAI.

07.11

SKYLIGHT PYRAMID STRUCTURE FOR BANK OF TANZANIA, ZANZIBAR.

AATI WAREHOUSE, AWIR, DUBAI.



07.1207.12



07.1307.13



07.1407.14



07.1507.15



07.1607.16



07.1707.17



STRUCTURAL PLATFORM FOR RACING STIMULATOR @ MALL OF EMIRATES

07.18

STRUCTURAL PLATFORM FOR RACING STIMULATOR @ MALL OF EMIRATES

07.18



07.1907.19



07.2007.20



07.21

TIERED SEATING STEEL STRUCTURE - CINE ROYAL


07.21





07.22

WALKWAY TENT STRUCTURE - SALALAH TOURISTIC COMPLEX

ALUMINIUM PERFORATED SCREEN - SALALAH TOURISTIC COMPLEX

07.22

WALKWAY TENT STRUCTURE - SALALAH TOURISTIC COMPLEX

ALUMINIUM PERFORATED SCREEN - SALALAH TOURISTIC COMPLEX



List Latest Projects 1. Project : Perl Cinemas Client : Grand Cinema Consultant : EGEC Qatar

2. Project : Serivice and Trade Company Client : Salalah Touristic & Commercial Complex Consultant : Option 1 International

3. Project : Khalidiya & Dalma Mall Cinemas Client : Cine Royal Consultant : Capital Engineering

4. Project : The Rixos Hotel – Palm Jumeirah Main Contractor : Semboz Construction Client : Al Fattan Consultant : M/s DSA

5. Project : Bloommingdales Main Contractor : Al Tayer Stocks LLC Client : Al Tayer Group Consultant : Meinhardt PTE LTD

6. Project : Factory Ware House Turnkey Project Client : M/s Airmaster Equipment Emirates LLC Consultant : Capital Engineering

7. Project : Deira City Center Main Contractor : Al Tayer Stocks LLC Client : Majid Al Futtaim Consultant : Holford Associates

8. Project : Marking suite glazing support structure Main Contractor : Al Tayer Stocks LLC Client : Dubai world trade center Consultant : M/s WSP

9. Project : IBN Battuta Mall Main Contractor : Al Tayer Stocks LLC Client : Nakeel

08

List Latest Projects1. Project : Perl Cinemas Client : Grand Cinema Consultant : EGEC Qatar

2. Project : Serivice and Trade Company Client : Salalah Touristic & Commercial Complex Consultant : Option 1 International

3. Project : Khalidiya & Dalma Mall Cinemas Client : Cine Royal Consultant : Capital Engineering

4. Project : The Rixos Hotel – Palm Jumeirah Main Contractor : Semboz Construction Client : Al Fattan Consultant : M/s DSA

5. Project : Bloommingdales Main Contractor : Al Tayer Stocks LLC Client : Al Tayer Group Consultant : Meinhardt PTE LTD

6. Project : Factory Ware House Turnkey Project Client : M/s Airmaster Equipment Emirates LLC Consultant : Capital Engineering

7. Project : Deira City Center Main Contractor : Al Tayer Stocks LLC Client : Majid Al Futtaim Consultant : Holford Associates

8. Project : Marking suite glazing support structure Main Contractor : Al Tayer Stocks LLC

Client : Dubai world trade center Consultant : M/s WSP

9. Project : IBN Battuta Mall Main Contractor : Al Tayer Stocks LLC Client : Nakeel

08



10. Project : Sahra Center Main Contractor : Al Tayer Stocks LLC

11. Project : Fertiliser Plant. Main Contractor : Al Tayer Stocks LLC Client : Spic Fertiliser

12. Project : U.A.E Armed Forces Shed. Client : Emco Building Contracting Consultant : Defence Authority

13. Project : GASCO Abudhabi Ruwais Project Main Contractor : Chicago Brodge & Iron eastern Anstalt Client : GASCO

14. Project : Mall of the Emirates Main Contractor : Al Tayer Stocks LLC Client : Majid Al Futtaim Consultant : M/s WSP, JRHP, M/s RMJM

15. Project : Museum ring features structure Main Contractor : Zabian Aluminium & Glass Industries Client : His Highness Shiek Consultant : Consult Manusel

16. Project : Dubai INTL, Airport Expansion Phase - 2 Client : Govt. of Dubai, Dept of Civilavition Consultant : M/s Dar Al - Handasah Shires & Partners.

08.01

10. Project : Sahra Center Main Contractor : Al Tayer Stocks LLC

11. Project : Fertiliser Plant. Main Contractor : Al Tayer Stocks LLC Client : Spic Fertiliser

12. Project : U.A.E Armed Forces Shed. Client : Emco Building Contracting Consultant : Defence Authority

13. Project : GASCO Abudhabi Ruwais Project Main Contractor : Chicago Brodge & Iron eastern Anstalt

Client : GASCO

14. Project : Mall of the Emirates Main Contractor : Al Tayer Stocks LLC Client : Majid Al Futtaim Consultant : M/s WSP, JRHP, M/s RMJM

15. Project : Museum ring features structure Main Contractor : Zabian Aluminium & Glass Industries Client : His Highness Shiek Consultant : Consult Manusel

16. Project : Dubai INTL, Airport Expansion Phase - 2 Client : Govt. of Dubai, Dept of Civilavition Consultant : M/s Dar Al - Handasah Shires & Partners.

08.01



09

PRESTIGIOUS LIST OF CLIENTS

09

PRESTIGIOUS LIST OF CLIENTS



10

PRESTIGIOUS LIST OF CONSULTANTS

10

PRESTIGIOUS LIST OF CONSULTANTS



11

Org

aniz

atio

nal C

hart

11

Org

aniz

atio

nal C

hart




www.advancemain.com www.advancegeneral.com

s

Tel .: 00971 4 2344772,Fax.: 00971 4 2344996,P.O.Box.: 81082, Dubai,U.A.E. [email protected]

Tel .: 00974 44123667Fax.: 00974 44816343POBox 201609,Doha, [email protected]

Tel .: 00971 6 7491397,Fax.: 00971 6 7491398,POBox 15307,Ajman, [email protected]

Tel .: 00971 4 2344772,Fax.: 00971 4 2344996,P.O.Box.: 81082, Dubai, [email protected]

Tel .: 00971 6 7435919Fax.: 00971 6 7435918P.O.Box 15307,Ajman, U.A.E.

Tel .: 0091 484 2533034, Fax.: 0091 484 2533035,Vytila, Kochi, Kerala, [email protected]


Tel .: 00971 4 2344772,Fax.: 00971 4 2344996,P.O.Box.: 114215, Abu Dhabi,U.A.E. [email protected]

Tel .: 00971 6 7486014,Fax.: 00971 6 7486015,P.O.Box.: 17833, Ajman,U.A.E. [email protected]

Tel.: 00968 24798877, Fax: 00968 24798844, Post Box No: 203, Postal Code: 117,Wadi Kabir, Sultanate of [email protected]


wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww.w.w.w.w.w.w.w.w.w.w.w.w.www.ww.w.w.w.w.wwwwwww.www.w.ww..adadadadadadadadadadadadadadadadddadadadadadddaddaadadadadddddaddadaaadddada vavavavavavavavavavavavavavavavavavavavavavavavavvavavvavvvvvvvvvvvvvaavvavavaaancncncncncncncncncnncncncncncncncncncncncncncncncnncncncnnnnnnccn ememememememememememeemememememememememememememeemmmememememememmememememaiaiaiaiaiaiaiaiaiaiaiaiaaiaiaiaiaiaiaiaiaiaiaiaiaiiaiaiaaiaaaiaiiiaiiinnn.nn.nn.n.n.n.n.nn.n.n.n.n.n.n.n.nn.n.nnn.n...cocococococococococococococococoococococococococcoccccooococcoccoc mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm wwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww.w.w.w.w.w.w.w.www.w.w.w.w.w.w.w.w.w.w.w.ww.w.www.wwwwwww adadadadadadadadadadadadadadadadadadadadaddadadadadddadadadddadddddvavavavavavavavavavavavavavaavavavavavavaaavavaaavaavaaaaaaaaavaaancncncncncncncncncnccncncncncncncncncncncncncncncccncccccncnccegegegegeeeegegegegegegegegegeegegegeegegegeegeggegeggeeegegeeggeneneneneneneneneneneneneneneneeeneenenenenenennenererererererererererererererereerererererererrere alalalalalalalalalalalalalalalalalalaalalalllllallalaaaaalaa .c.c.c.c.c.c.c.c.c.c.c.c.c.c.c.c.c.c.cc.cc.cccccccomomomomomomomomomomomomomomomomomommomomommmmmmomommooommomommmommmmmooommmmommoo

s


Tel .: 00974 44123667Fax.: 00974 44816343POBox 201609,Doha, [email protected]

Tel .: 00971 6 7491397,Fax.: 00971 6 7491398,POBox 15307,Ajman, [email protected]

Tel .: 00971 4 2344772,Fax.: 00971 4 2344996,P.O.Box.: 81082, Dubai, [email protected]

Tel .: 00971 6 7435919Fax.: 00971 6 7435918P.O.Box 15307,Ajman, U.A.EEEEEE.EEEE.EEEE...

Tel .: 0091 484 2533034,Fax.: 0091 484 2533035,Vytila, Kochi, Kerala, [email protected]

Tel .: 00971 4 2344772,Fax.: 00971 4 2344996,P.O.Box.: 81082, Dubai,U.A.E. qline@advancemain.ccccccoocooooccccoccoccoccccooooccccoooocccoocccccccccoocccccccccccccccccccccoccommmmmmmm

Tel .: 00971 4 2344772,Fax.: 00971 4 2344996,P.O.Box.: 114215, Abu Dhabi,U.A.E. [email protected]

Tel .: 00971 6 748601014,4,Fax.: 00971 6 748686015015,P.O.Box.: 17833, Ajmamann,U.A.E. [email protected]

Tel.: 00968 24798877, Fax: 00968 24798844, Post Box No: 203, Postal Code: 117,Wadi Kabir, Sultanate of [email protected]



Tel.: 00971 4 2344772, Fax: 00971 4 2344996, … Steel... · 2018. 8. 3. · 10. Prestigious List...

Documents

Transcript of Tel.: 00971 4 2344772, Fax: 00971 4 2344996, … Steel... · 2018. 8. 3. · 10. Prestigious List...