TECNOTEST Via Enrico De Nicola, 31 - 41122 MODENA, Italy ...
1
TECNOTEST Via Enrico De Nicola, 31 - 41122 MODENA, Italy - Tel. +39 059 25.20.25 - Fax +39 059 25.38.48 - www.tecnotest.it - [email protected] The special characteristic of the machine consists in its 6 speeds (pre-set and ranging from 0.6 to 50.8 mm/min.). Speed change is made via keyboard. It is possible to set intermediate speeds beyond those ones already pre-set. Particularly suitable for the following tests (see table): Marshall, Hubbard-Field, CBR (ASTM e BS), Unconfined. TEST PISTON SPEED MARSHALL 2”/min. (50.8 mm) HUBBARD-FIELD 1”/min. (25.4 mm) C.B.R. (ASTM) 0.05”/min. (1.27 mm) C.B.R. (BS) 1 mm/min. UNCONFINED 0.025”/min. (0.635 mm) The machine can also be used for other tests. T 051/B65 50 KN VARIABLE SPEED MACHINE (6 SPEEDS) STANDARDS: BS 598, ASTM D 1559, CNR 30, EN 12697-12, EN 12697-34, AASHTO T 245 SPECIFICATIONS SPEEDS 0,635 - 1 - 1,27 - 5 - 25,4 - 50,8 mm/min MAX VERTICAL SPAN 600 mm MIN VERTICAL SPAN 100 mm HORIZONTAL SPAN 380 mm RAM TRAVEL 100 mm POWER SUPPLY 220 V, 50 Hz, monofase, 750 W DIMENSIONS 535 x 515 x 1240 (h) mm In the picture: • T 051/B65 testing machine • BB 050 proving ring • BA 201 load penetration piston • B 005/A bracket for dial gauge • T 628/E1 dial gauge • B 005/T Marshall breaking head new
Transcript of TECNOTEST Via Enrico De Nicola, 31 - 41122 MODENA, Italy ...
TECNOTEST Via Enrico De Nicola, 31 - 41122 MODENA, Italy - Tel. +39 059 25.20.25 - Fax +39 059 25.38.48 - www.tecnotest.it - [email protected]
The special characteristic of the machine consists in its 6 speeds
(pre-set and ranging from 0.6 to 50.8 mm/min.).
Speed change is made via keyboard.
It is possible to set intermediate speeds beyond those ones
already pre-set.
Particularly suitable for the following tests (see table): Marshall,
Hubbard-Field, CBR (ASTM e BS), Unconfined.
TEST PiSTon SPEEd marshall 2”/min. (50.8 mm)
hubbard-field 1”/min. (25.4 mm)
c.b.r. (astm) 0.05”/min. (1.27 mm)
c.b.r. (bs) 1 mm/min.
unconfined 0.025”/min. (0.635 mm)
The machine can also be used for other tests.
T 051/B65 50 kN VARIABLE SPEED MACHINE (6 SPEEDS)STandardS: BS 598, ASTM D 1559, cnr 30, En 12697-12, En 12697-34, AASHTO T 245
SPECiFiCaTionSsPeeds 0,635 - 1 - 1,27 - 5 - 25,4 - 50,8 mm/min
maX Vertical sPan 600 mm
min Vertical sPan 100 mm
horizontal sPan 380 mm
ram traVel 100 mm
PoWer suPPlY 220 V, 50 Hz, monofase, 750 W
dimensions 535 x 515 x 1240 (h) mm
In the picture:• T 051/B65 testing machine• BB 050 proving ring• BA 201 load penetration piston• B 005/A bracket for dial gauge• T 628/E1 dial gauge• B 005/T Marshall breaking head
new
