TECNADE Cat. Eng.
-
Upload
mirticaret-mirticaret -
Category
Documents
-
view
334 -
download
16
description
Transcript of TECNADE Cat. Eng.
TECNTECNADEADEADHESION ADHESION TECHNOLOGYTECHNOLOGY
INDUSTRIAL ADHESIVES FOR PROFESSIONALSINDUSTRIAL ADHESIVES FOR PROFESSIONALS
ENGLISHENGLISHPRODUCTS CATALOGPRODUCTS CATALOG
www.tecnade.it
TECNADE ADHESION TECHNOLOGY
TECNADE is an Italian society that produces a vast range of adhesives and sealants technologically advanced, mainly addressed to the industrial use. The society is born over 25 years ago, in the area of the centre in Milan, with the purpose to furnish adhesive and sealing of elevated qualitative standard to everybody the industrial user guaranteeing reliability and services. Everything this thanks to our knowledge, to the high quality of our technicians and to a group of extremely motivated job. And' is tried that our anaerobic products, cianoacrylates, are to the more qualitative high-level and largely accepted by a lot of societies leader of the sector. We have submitted besides our products to tests near international corporate body that have certified them and approved for specific applications. The experience and the technical support assure contemplated solutions and you personalize, in conformity with to every productive demand. Investments you continue they are destined to the search and the development to satisfy the applications on every type of application.
Bereguardo - Pavia - Italy
The approvals TECNADE can be verified on the sites of the corporate body certifiers
OOOOur CCCCompany
The SELON sealants are monocomponent anaerobic products, for the seal of fittings in private and industrial plants. These can be used with the promotion of water, air, gas and fuels. Furthermore they can be used together with many chemical elements and their mixtures. They replace ribbons of PTFE, pipe joint compound and hemp. Goodresistance to the temperature and the chemical agents. They polymerize inside the metallic spiral filling the existing gap fill among the parts. They lubricate and facilitate the assemblage.
SELON 338
3
10-15
-50+150
0.35
28-40
35-45
GREEN
60.000-90.000
338
3
10-15
-50 + 150
0.30
15-20
20-28
BLUE
40.000-70.000
616
3
10-15
-50+150
0.30
10-15
20-28
WHITE
30.000-60.000
616 PTFE
3
10-15
-50+150
0.30
15-20
25-30
LIGHT BLU
40.000-70.000
618 PTFE
3FUNCTIONAL RESISTANCE (hours)
10-15FIXTURE TIME (min)
-50+150TEMPERATURE RANGE (°C)
25-30BREAK TORQUE (N.M)
YELLOW COLOUR
30.000-60.000VISCOSITY (mPa.s)
15-25PREVAIL TORQUE (N.M)
0.35MAX GAP FILL (mm)
628 PTFEPRODUCT
Sealant with high mechanical firmness. With DVGW release. For private and industrial plants. Maximum
sealing characteristic also with high pressure. Approved by DVGW
SELON 616 Sealant with middle mechanical firmness. Very many areas of application. For plants of air, water, gas, GPL, ecc. Approved by DVGW
SELON 616 ptfe Identically with SELON 616, with additive of PTFE in order to give the polymer layer higher elasticity characteristics. Middle to de-install. Approved by DVGW and GASTEC
SELON 618 ptfe Very fast sealant with additive of PTFE. For use in potable water plants. Middle to de-install. Approved by DVGW and WRAS
SELON 628 ptfe Anaerobic product with middle/high mechanical resistance. Blocks and seals mechanical thread connections. Approved by DVGW and WRAS
WRAS BS 6920
DVGW EN 751-1
Approvals
NG-5146BS0030NG-5146BM7033NG-5146BT0107NG-5146BM0328NG-5146AT0298
07065050206522
628 PTFE618 PTFE616 PTFE616338
ADHESION TECHNOLOGY TECNADE
Technical data refferring to test in according to ISO 10964 on M10 zinc nut and bolt. Break torque after 24 hours
AAAAnaerobic SSSSealants
TECNADE ADHESION TECHNOLOGY
TECNADE THREADLOCKERS ARE DESIGNED TO LOCK AND SEAL THREADED METAL PARTS TO PREVENT LOOSELING AND LEAKAGE WHIT EXELLENT CHEMICAL AND ENVIROMENTAL RESISTANCE. PRODUCE A LUBRICATING EFFECT ON SCREWING. AVAILABLE IN A WIDW RANGE OF VISCOSITY, COLOUR AND MECHANICAL STRENGTH
SELON 230 Seals and blocks all kinds of screw connections. Develops a very high resistance against de-installing. Very fast. Approved by I.P.L. Santè to use in potable water plants.
SELON 234 Suitable with non-iron metals. Develops a very high resistance against high temperatures. Firms slowly
SELON 240 Seals screw connections, suitable with every type of metals. Difficult to de-install. Excellent resistance to temperature
SELON 330 Fix even parts such as bearings, driver wedges...as well as thread connections that may not separate by vibrations or impacts. Approvaed by I.P.L. Santè to use in potable water plants.
SELON 332 Seal and lock valves and pipes. Low viscosity and excellent speed of cure. Ideal for automatic assembly
SELON 334 Fix even parts such as bearings, bearing bowls, handles and driving wedges... Medium viscosity high resistance
SELON 335 For the fast assembly with „proportioner“, even with low temperatures. Very difficult to de-install. High speed
SELON 335 TO Fast assembly with “proportioner”. Application: plants with high water temperature. DVGW - Release in I class on brass.
SELON 336 For even parts and for large threaded pieces. Approved by Bam and Wras to use in oxygen and potable water plants. Approved by I.P.L. Santè to use in potable water plants.
SELON 631 Product with low viscosity to seal microporosity in cast parts. Protection of smaller thread connections.
SELON 335 TO Approval n° NG-5146BL0458
SELON 336 Approval n° 0706506
SELON 336 Approval n° II-3917/2005 E
TTTTreadlockers
SELON 330 Approval n° 08 CLP NY 008
SELON 336 Approval n° 08 CLP NY 009
SELON 230 Approval n° 08 CLP NY 007
-50+150
-50+150
-50+150
-50+150
-50+150
-50+150
-50+150
-50+200
-50+180
-50+150
TEMPERATURE
RANGE (°C)
15-20
10-15
20-30
10-15
10-15
10-15
10-15
10-15
25-35
10-15
FIXTURE TIME (min)
0.10
0.30
0.15
0.15
0.25
0.15
0.15
0.25
0.15
0.15
MAX GAP FILL (mm)
FUNCTIONAL RESISTANCE
(hours)
PRAVAIL TORQUE (N.M)
BREAK TORQUE (N.M)
COLOUR VISCOSITY (mPa.s)
PRODUCT
345-5045-55GREEN1.000-1.500336
335-4030-35GREEN60-90631
400-600
300-500
800-1.200
200-400
150-300
8.000-15.000
400-600
300-500
GREEN
GREEN
GREEN
GREEN
GREEN
GREEN
GREEN
GREEN
35-40
40-50
40-50
40-45
40-50
45-55
35-45
45-55
30-4
35-45
35-45
35-40
35-45
35-45
30-40
35-45
6335 TO
3335
3330
3240 S
6234
3332
3334
3230
High performance also whit Low Temperatures
TECNADE is partner of leader company
Available size
-10 ml
- 50 ml
- 250 ml
- 500 ml
- Liter
ADHESION TECHNOLOGY TECNADE
Technical data refferring to test in according to ISO 10964 on M10 zinc nut and bolt. Break torque after 24 hours
To secure screws and/or block cylindrical parts. Depending upon product and area of application the anaerobic products of the SELON row have a multiplicity of application types. Block, secure, seal, avoid that parts separate, SELON is suitable for each use.
SELON 210
3
15-20
-50 + 150
0.10
5-10
15-20
PURPLE
800-1.200
210
3
10-15
-50 + 150
0.15
15-25
20-30
BLUE
500-800
220
3
10-15
-50 + 150
0.15
18-22
25-35
BROWN
400-600
320
3
10-15
-50 + 150
0.15
15-25
20-30
RED
600-800
620
3FUNCTIONAL RESISTANCE (hours)
10-15FIXTURE TIME (min)
-50 + 150TEMPERATURE RANGE (°C)
25-35BREAK TORQUE (N.M)
BLUECOLOUR
2.000-4.000VISCOSITY (mPa.s)
20-30PREVAIL TORQUE (N.M)
0.20MAX GAP FILL (mm)
622PRODUCT
Very easy to de-install. Very suitable for to the protection of screws and nuts, also in very small dimensions (uhrmacher, optiker). Only for DIN joints.
SELON 220 Seals and blocks all kinds of bolt connections. High resistance against vibrations, polymerises very fast on a high variety of iron metals. Middle to de-install.
SELON 320 Suitable to fix even parts such as bearings, bearing bowls, driver wedges.... As well as thread connections that may not separate by vibrations or impacts.
SELON 620 Sealant for threaded pieces in hydraulic and pneumatic plants. Resistant to the aggressiveness of oils.
Middle to de-install.
SELON 622 Tixotropic product. Very suitable to seal screws, blind hole screws, nuts and all kinds Of bolt connections.
Very high resistance against vibrations. Approved by I.P.L. Santè to use in potable water plants.
Approval n° 07 CLP NY 011
TECNADE ADHESION TECHNOLOGY
RRRRetainer
Technical data refferring to test in according to ISO 10964 on M10 zinc nut and bolt. Break torque after 24 hours
The anaerobic gaskets replace or-ring and they allow varied advantages. The junction doesn't suffer relaxations of some type, the thickness of the manufactured article is not altered, it eliminates the loosening of the bolts and the rubbing usury of the flangiesincreasing the resistance of the assembled one. These products allow besides great tolerances of workmanship offering a good chemical compatibility and resistance to the temperature.
SELON 611
3
20-30
-50+150
0.25
5-10
10-20
GREEN FLUO
60.000-90.000
611
3
15-25
-50 + 150
0.35
15-20
20-28
ORANGE FLUO
70.000-100.000
626
3
15-25
-50+150
0.50
10-15
20-28
RED
80.000-120.000
628
3
15-25
-50+150
0.35
15-20
25-30
GREENFLUO
40.000-70.000
629
5FUNCTIONAL RESISTANCE (hours)
60-120FIXTURE TIME (min)
-50+315TEMPERATURE RANGE (°C)
25-30BREAK TORQUE (N.M)
REDCOLOUR
40.000-70.000VISCOSITY (mPa.s)
15-25PREVAIL TORQUE (N.M)
3MAX GAP FILL (mm)
701PRODUCT
Elastic gasket maker for junctions flexible. Low mechanical resistance also allows the dismantlement with hand tools distance of years from the application.
SELON 626 Universal gasket maker of average resistance to the dismantlement. Many areas of application, it also seals quickly to low temperatures.
SELON 628 Product for elevated performances. The Film polymerized extremely elastic allows a May tolerance the bumps and the vibrations. Middle/high Mechanical resistance.
SELON 629 Anaerobic product for sealing even surfaces, like e.g. covers, flanges, pump housings...... Replaces all kinds of gaskets. Middle/high mechanical strength.
SELON 701 Silicone RTV for high temperatures. It perfectly seals and it hardens in elastic way. It doesn't strain, recommended on cups of the oil, pumps water, boxes change, differential, covers of valves and lodgings thermostats.
ADHESION TECHNOLOGY TECNADE
The bottles of gasket maker, tube and soufle, allow almost her complete extrusion of the product limiting the wastes during the use
Technical data refferring to test in according to ISO 10964 on M10 zinc nut and bolt. Break torque after 24 hours
GGGGasket Maker
TECNADE ADHESION TECHNOLOGY
The products Acrilon are adhesive instant that allow structural junctions also gluing quickly metals, rubbers, ceramics, leather, paper and porous materials in combination among them. To temperature environment and under conditions of normal damp, once mediate among two pieces to contact among them, the adhesive Acrilon harden in some second.
ACRILON 20 Universal of average rapidity for metals and plastics
ACRILON 20P Rapid on sour surfaces for cardboard, leather and metals.
ACRILON 21 Rigid Materials. Elevated mechanical resistance, taken slower
ACRILON 26 Express and fluid for paper, cardboard, skin and leather
ACRILON 28 Viscous for porous materials. Full ampler gap fill, taken slower
ACRILON 29 Cianoacrylate adhesive gel for vertical applications. It doesn't strain
ACRILON 30 Fluid, rapid, fit rubbers, EPDM and plastics
- 55°C + 82°C2’’ - 3’’20 - 30 mPa.SEthilcianoacrylateAcrilon 30
- 55°C + 82°C20’’ - 120’’gelAlcossicianoacrylateAcrilon 29
- 55°C + 82°C15’’ - 45’’100 - 150 mPa.SMethilcianoacrylateAcrilon 21
- 55°C + 82°C1’’ - 15’’100 - 150 mPa.SEthilcianoacrylateAcrilon 20P
- 55°C + 82°C5’’ - 30’’80 - 120 mPa.SEthilcianoacrylateAcrilon 26
- 55°C + 82°C20’’ - 120’’1400 - 1600 mPa.SMethilcianoacrylateAcrilon 28
- 55°C + 82°C5’’ - 30’’80 - 120 mPa.SEthilcianoacrylateAcrilon 20
Temperature Temperature rangerangeFixtureFixture timetimeViscosityViscosityChemicalChemical TypeTypeProductProduct
Available size
-10 g
- 20 g
- 50 g
- 500 g
- Bulk 20 Kg
In the formats 10-20-50g practical cork with hood to pin that avoids the filling of the lip after the first use
CCCCianoacrylates Adhesives
P Crimer & leaner
SELON 7300 ACTIVATORActivator of surface in solvent phase. It allows to accelerate the polymerization of the products Selon and it is essential when the parts to be joined are of inactive metals, the temperature environment is too much low, the game among the parts doesn't allow the hardening of the anaerobic product. Used on active materials it fixes in few second
Employed for guaranteeing an instant hardening of the cianoacrylates Acrilon. And' particularly suitable for the use with the products of high stringiness and on the porous surfaces where the sticker must begin the hardening before being absorbed. Acrilon Actifast 7800 as post-activator can also be used for guaranteeing the hardening of sticker flexes.
ACRILON 7800 ACTIFAST
Universal cleaner. Used for the final cleaning of the metallic parts by to assemble with the products SELON. It removes completely oil and fat from the surfaces and it doesn't alter the performances of the anaerobic adhesives and cianoacrylates (the presence of oil and fat on the parts it causes a partial polymerization of the products with consequent risk of losses). CFC free.
CLEANER CLEANTEC
Product for the removal of the cianoacrylates adhesive Acrilon. It allows the removal of these from the surfaces amiss dirtied, drivels of spillage post joining and accidental distribution of the product.
Produced to solvent base for bonding of EPDM polypropylene, polyolefin and other material inactive. Usable as accelerating (primer) to increase the speed of reaction in the joinings of metals, rubbers, leather. Nearly taken instant.
ACRILON 7900 DEBONDER
ACRILON 7700 ACTIFAST
ADHESION TECHNOLOGY TECNADE
from over 27 years we produce solutionsfrom over 27 years we produce solutions
……inin the worldthe world
P Gasta per iuntiPIPE JOINT COMPOUND - TECPAST
Sealing pipe joint compound of easy application for the sealing of filleted metallic joinings. The product doesn't separate him, it is homogeneous and it doesn't harden. Usable for fittings to gas, warm water, compressed air. Don't use in oxygen plants.
It doesn't also Harden to distance of months Easily applies you on the hempFacilitates the assemblage of the joints it Doesn't react, dismantlement facilitated in the time Confirmed DVGW (water, gas, GPL) Confirm TZW (KTW) for drinkable water For Foods TECPAST, DVGW being confirmed, it dresses again an important role in the certifications of conformity of the hydraulic fittings that enact the mass in work of the same to "rule of art."
TECPAST
DVGW n° NV-5142AU0442
Temperature Range: -20 °Cs + 130 °Cs Expire Date: 24 months Pressure Max with water: 16 BarPressure Max with gas: 5 Bar
APPROVED EN 751-2
ARP CLASS and DIN 30660
TECNADE ADHESION TECHNOLOGY
ADHESION TECHNOLOGY TECNADE
Bottles 50 ml Bottles 250 ml
Soufle 50/75 ml Soufle with mantle 50/75 ml
Tube 50/100/250 ml Bulk 5/10/20 Kg
Our Firm is also specialized in the personalization of his/her own products for small quantities. Here following an example of the formats and available colors already in our stores. Elevated productive flexibility, allows besides us to escape shortly time, you also order consistent.
PPPPrivate Label
The approvals TECNADE can be verified on the sites of the corporate body certifiers
Some of Some of ourour CertificationsCertifications
For further information see technical and safety data sheets
ChooseChoose the the QualityQuality
……andand the the SafetySafety
informative title even if they are considered reliable. TECNADE guarantees the constant quality of the products furnished in relationship to the specific techniques of the same. We cannot assume us the responsibility of results gotten by third where themethods of job are not under our forehand control. It is responsibility of the user verify the validity of the characteristics of the product in relationship to his productive necessities and to adopt all the necessary measures for the protection of the people and the things from the situations that they can be verified with the use in work of the product.