TECHWORKS … · SHELF BENCH PEDESTAL BASE SHELF. 2 Organizer Frame Accessories pg. 15-19 Base...

1

TECHWORKS®

S P E C G U I D E

BENCHES ORGANIZER FRAMES SHELVES TABLES FINISHESACCESSORIES

OVERHEAD STORAGE BIN

POWER STRIP

ORGANIZER FRAME

PANEL

SHELF

BENCH

PEDESTAL

BASE SHELF

2

Organizer Frame Accessoriespg. 15-19

Base Accessories pg. 20-21

ACCESSORIES

1. Select your bench and worksurface/shelf material.

Straight Benchespg. 3

Straight Framespg. 7

Organizer Frame Shelvespg. 10-12

Base Shelvespg. 13-14

Corner Benchespg. 4

Corner Framespg. 8

L-Shaped Benchespg. 5

L-Shaped Framespg. 9

Electric Height-Adjustable Benches pg. 6

BENCHES

ORGANIZER FRAMES

SHELVES

2. Select a frame to match up with your bench width.

3. Select your shelves. 4. Select your accessories. 5. Select your finishes.

Straight Tablespg. 22

Powder Paint Finishespg. 23-24

Fabric Finishespg. 23-24

Work Surface Finishespg. 23-24

TABLES

FINISHES

TECHWORKS®

3

• Bench holds 1,000lbs evenly distributed• Bench standard work surface options include: - HPL (High Pressure Laminate 1 1/8” thick) with 3mm PVC on all sides - Butcher Block (1 ¾” thick with bullnose front edge) 1/8" radius on all sides - ESD (Electro-Static Discharge 1 1/8” thick) with ground terminus. ESD available in Gray laminate with Black edge banding only (coordinating accessories available on pg. 23)• All work surfaces come standard with 1 ¾”x 3 ¼” grommet holes

HOW TO SPECIFY

1. Choose your bench work surface material

• HPL • ESD (includes grounding terminus; coordinating accessories available on pg. 23) • Butcher Block

2. Choose your bench depth

• 24” • 30” • 36”

3. Choose your bench width (note - 96” benches have a 3rd support leg - shown on right)

• 24” • 30” • 36” • 48” • 60” • 72” • 96”

4. Choose your bench finishes (see finish options pg. 24)

• Powder coat paint color • Work surface color if applicable

5. Add optional below work surface accessories (See page 20-21) or above work surface organizer frame (See page 7)

Bench has 12” of travel range measuring 26” to 38” from the floor to the top of the work surface. Adjusts in 1” increments with threaded fasteners. Bench comes standard with leveling glides; optional casters are available (item #350221-caster 4pk) but will add 3” to overall bench height. Ships knocked down.

72” W Bench

STRAIGHT BENCHES

FRONT

TOP

96” Wide Bench

26-38" H

4

CORNER BENCHES

48” W BenchSIDE

TOP

• Bench holds 1,000lbs evenly distributed• Bench standard work surface options include: - HPL (High Pressure Laminate 1 1/8” thick) 3mm PVC on all sides - Butcher Block (1 ¾” thick) 1/8" radius edge on all sides - ESD (Electro-Static Discharge 1 1/8” thick) with ground terminus. ESD available in Gray laminate with Black edge banding only (coordinating accessories available on pg. 23)• All work surfaces come standard with 1 3/4”x 3 ¼” grommet holes• 72”W corner available with Butcher Block work surface only• 24”, 30” & 36”W squared corner benches do no have cutout on front (Shown on right)

HOW TO SPECIFY





• 24” • 30” • 36”

3. Choose your bench width

• 24” • 30” • 36” • 48” • 60” • 72”


5. Add optional below works surface accessories (See pg. 20-21) or above work surface organizer frame (See pg. 8)

Bench has 12” of travel range measuring 26” to 38” from the floor to the top of the work surface. Adjusts in 1” increments with threaded fasteners. Bench comes standard with leveling glides; optional casters are available (item # 742 caster-5pk) but will add 3” to overall bench height. Ships knocked down.

Squared 24", 30" & 36" Corner Benches

26-38" H

5

72” W Bench

48” Bench SIDE

TOP

L-SHAPED BENCHES

• All L-Shaped benches are 72”W x 48” • Bench holds 1,000lbs evenly distributed• Bench standard work surface options include: - HPL (High Pressure Laminate 1 1/8” thick) - Butcher Block (1 ¾” thick with bullnose front edge) 1/8" radius on all sides - ESD (Electro-Static Discharge 1 1/8” thick) with ground terminus (coordinating accessories available on pg. 23)• All work surfaces come standard with 1 3/4”x 3 ¼” grommet holes• Right-handed and left-handed options available

Right-handed

Left-handedHOW TO SPECIFY




• 24” • 30” • 36”

3. Choose your handedness

• Right-handed • Left-handed



5. Add optional below works surface accessories (See pgs. 20-21) or above work surface organizer

frame (See pg. 9)

Bench has 12” of travel range measuring 26” to 38” from the floor to the top of the work surface. Adjusts in 1” increments with threaded fasters. Bench comes standard with leveling glides; optional casters are available (item #742 caster-5pk) but will add 3” to overall bench height. Ships knocked down.

26-38" H

6

72” W Bench

ELECTRIC HEIGHT-ADJUSTABLE BENCHES

FRONT

TOP

• Bench holds 1,000lbs evenly distributed• Bench standard work surface options include: - HPL (High Pressure Laminate 1 1/8” thick) - Butcher Block (1 ¾” thick with bullnose front edge) - ESD (Electro-Static Discharge 1 1/8” thick) with ground terminus. ESD available in Gray laminate with Black edge banding only (coordinating accessories available on pg. 23)• All work surfaces come standard with 1 3/4”x 3 ¼” grommet holes• All benches are 30” D

HOW TO SPECIFY


• HPL • Butcher Block • ESD

2. Choose your bench width

• 48” • 60” • 72”

3. Choose your bench finishes (see finish options pg. 24 )


4. Add optional above work surface organizer frame (See pg. 7)

Bench has 25” of travel range measuring 25” to 50” from the floor to the top of the work surface.Bench comes standard with leveling glides; optional casters are available (item # 350221) but will add 3” to overall bench height. Ships knocked down.

25”

50”

7

HOW TO SPECIFY

1. Choose your organizer frame width that matches your bench

• 24” frame assembly (1-24” section)



• 48” frame assembly (2-24” sections)



• 96" frame assembly (2 - 48" sections)

2. Choose your organizer frame height

• 24” • 36” • 48”

3. Choose your organizer frame finishes (see finish options pg. 24)

• Powder coat paint color

*To add optional organizer frame accessories, see pg. 15-19.

60” W x 48” H FrameFRONT

TOP

STRAIGHTORGANIZER FRAMES

• 14-Gauge cold rolled steel construction, organizer frames hold up to 400lbs evenly distributed• Designed for horizontal and vertical integrated cable management between the frame uprights• Order work surfaces with grommets when using organizer frame Work surfaces without grommets will not allow for integrated cable management.• For back-to-back benching applications: To use one shared frame with back-to-back accessories add item 733, Shared Organizer Frame Support Brackets. Add item 73303 if using two separate organizer frames bound back-to-back.

Open frame design provides above work surface support for hanging accessories. Fixed height organizer frame mechanically fastens to the TechWorks Bench work surface and height adjusts with the bench. Frames allow for vertical adjustment of accessories in 1” increments. Ships knocked down.

24" Assembly 30" Assembly

1-24" Section 1-30" Section


1-36" Section 2-24" Sections


2-30" Sections 3-24" Sections

96" Assembly

2-48" Sections

24" 36" 48"

8

HOW TO SPECIFY


All corner frames consist of two corner frame assemblies with a corner connector as follows:

• 24” Bench = 24" Corner Frame, consisting of 2-20”W frame assemblies



• 48" Bench = 48" Corner Frame, consisting of 2 - 44” W frame assemblies (24" outer section and a 20" inner section)

• 60” Bench = 60" Corner Frame, consisting of 2- 56” W frame assemblies (30" outer section and 26" inner section)

• 72” Bench = 72" Corner Frame, consisting of 2-68” W frame assemblies (2-24” W outer sections and 1-20” section)


• 24” • 36” • 48”



*To add optional organizer frame accessories, see page 15-19.

Corner Frame

FRONT/SIDE

TOP

• 14-Gauge cold rolled steel construction, organizer frames hold up to 400lbs evenly distributed• Designed for horizontal and vertical integrated cable management between the frame uprights• Order work surfaces with grommets when using organizer frames Work surfaces without grommets will not allow for integrated cable management.• Inner grommets of a corner frame do not line-up with grommets of a straight Techworks Benches; specify corner benches for correct alignment of grommets. • Inner frame sections of corner units are only compatible with corner accessories (See organizer frame accessories pgs. 15-19 for more details)• Shared organizer frame support brackets, item 733, are not compatible with corner frame applications.


CORNERORGANIZER FRAMES

24" Corner Frame

48" Corner Frame

2-20" Sections

24" Outer Sections, 20" Inner Sections

20"

24"20"

4"

4"

4"

4"

20"

24"20"

9

L-Shaped Frame

SIDE

TOP

HOW TO SPECIFY


• 72" Bench = 72" L Frame (72" x 48"), consisting of 1-68” frame assembly (2-24” outer sections and

1-20” inner section for 72" side), and 1- 44” frame assembly (1-24” outer section and 1-20” inner

section for 48" side).


• 24” • 36” • 48”



*To add optional organizer frame accessories, see pgs. 15-19.

• 14-Gauge cold rolled steel construction, organizer frames hold up to 400lbs evenly distributed• Designed for horizontal and vertical integrated cable management between the frame uprights• Inner frame section of L-Shaped units will not fit all accessories (see organizer frame accessories pgs. 15-19) for more details• Order work surfaces with grommets when using organizer frames. Work surfaces without grommets will not allow for integrated cable management. • Inner grommets of a corner frame do not line-up with grommets of a straight Techworks Benches; specify corner benches for correct alignment of grommets. • Inner frame sections of corner units are only compatible with corner accessories (See organizer frame accessories pgs. 15-19 for more details)• Shared organizer frame support brackets, item 733, are not compatible with corner frame applications.


L-SHAPEDORGANIZER FRAMES

72" x 48" Corner Frame

2-24" Outer Sections, 1-20" Inner Section

1-24" Outer Section, 1-20" Inner Section

20"24"

24"

4" 4"24"

20"

10

HOW TO SPECIFY

1. Choose your shelf material

• HPL • ESD (includes grounding terminus; coordinating accessories available on pg. 23)

2. Choose your shelf width that matches your organizer frame

• 24” • 30” • 36” • 48” • 60” • 72”

3. Choose your shelf depth

• 12” • 18”

4. Choose your shelf finishes (see finish options pg. 24)

• Shelf laminate color

• Shelf edge band color

• Powder coat paint and laminate finish can be matched to TechWorks bench

• Shelf weight capacity is 200lbs.• Shelves are adjustable on 1” increments• Shelves install and can be relocated for easy adaptability

Fixed Cantilevered - Straight RectangularFixed Cantilevered Shelves provide general storage. Fixed Cantilevered Shelves can be used with straight organizer frames, corner organizer frames and L-shaped organizer frames “outer” sections only (not compatible with corner organizer frames and L-shaped organizer frames “inner” sections). For inside corner frames, see corner shelves on pg. 12.

ORGANIZER FRAME SHELVES

Placement of straight shelves on a corner frame(outsides only)

OUTSIDE

INSIDE

FRONT

11

HOW TO SPECIFY


• HPL • ESD (includes grounding terminus; coordinating accessories available on pg. 23) 2. Choose your shelf

width that matches your organizer frame

• 24” • 30” • 36” • 48” • 60” • 72”


• 18”


• Shelf laminate color (if applicable)




Tilted Cantilevered Shelves - Straight RectangularTilt Cantilevered Shelves provide general storage. Tilt shelves have full-length raided safety edge to prevent forwarded slippage of stored equipment. Tilt shelves can be positioned at 0⁰, 5⁰, or 10⁰. Tilt Cantilevered Shelves can be used with straight organizer frames, corner organizer frames and L-shaped organizer frames “outer” sections only (not compatible with corner organizer frames and L-shaped organizer frames “inner” sections).


��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

Placement of straight shelves on a corner frame(outsides only)

OUTSIDE

INSIDE

FRONT

12

HOW TO SPECIFY


• HPL • ESD (includes grounding terminus; coordinating accessories available on pg. 23)

2. Choose your shelf width that matches your organizer frame

• 24” • 30” • 36” • 48” (use with 72x48” L and 72x72” corner applications) • 60”


• 12” • 18”


• Shelf laminate color (if applicable)



FRONT


Fixed Cantilevered Corner ShelvesFixed Cantilevered Corner Shelves provide general storage. Shelves can be used with Corner and L-Shaped Organizer frames only (not compatible with straight organizer frames).

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��


Placement of corner shelves on an L-Shaped frame

13

FRONT

��

��

��

��

��

��

��

��

��

HOW TO SPECIFY

1. Choose your shelf width that matches your bench

• 24” • 30” • 36” • 48” • 60” • 72” • 96"


• Partial Base Shelf- 12” • Full Base Shelf-23” (*if 96” width is requested, shelf will be 18”)


• Powder coat paint

• 24” deep benches can only accommodate partial base shelves• Weight Capacity of Full Base or Partial Base Shelf is 400lbs each• Full Base shelves can be used with 30 or 36” deep benches only • Full Base shelf on 96” wide benches is only 18” deep

Base Shelves - StraightStraight base shelves are constructed from 14-gage cold rolled steel and provide general storage below the worksurface of TechWorks Straight Benches. Available in full depth (23” deep) or partial depth (12” deep) and can be attached to TechWorks benches in two preset locations (lower or upper cross bars on the bench base legs).

BASE SHELVES

14

HOW TO SPECIFY

1. Choose your shelf width that matches your bench

• 24” • 30” • 36” • 48” • 60” • 72”


• Partial Base Shelf- 12” • Full Base Shelf-23”


• Powder coat paint

• Weight Capacity of Full Base or Partial Base Shelf is 400lbs each• Corner base shelves are installed along one side of the corner unit• Only one shelf can be used per upper or lower cross bar

Base Shelves - Corner ApplicationsCorner base shelves are constructed from 14-gage cold rolled steel and provide general storage below the worksurface of TechWorks Corner and L-Shaped Benches. Available in full depth (23” deep) or partial depth (12” deep) and can be attach to TechWorks benches in two preset locations (lower or upper cross bars on the bench base legs).

BASE SHELVES

FRONT

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

15

��

��

� ��

��

��

��

��

��

��

��

��

� ��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

ORGANIZER FRAMEACCESSORIES

HOW TO SPECIFY

1. Choose your overhead storage width that matches your organizer frame section

• 24” • 30” • 36”

2. Choose your overhead storage finishes

• Powder Paint Color

• Powder coat paint can be matched to TechWorks organizer frame when applicable

HOW TO SPECIFY

1. Choose the bin strip width that matches your organizer frame section

• 24” • 30” • 36”

2. Choose your parts bin panels finishes (see finish options pg. 24)



HOW TO SPECIFY

1. Choose the fabric screen width that matches the organizer frame section

For straight applications: • 24” • 30” • 36”

For corner applications: • 20” • 26” • 32”

2. Choose the fabric screen height that matches your organizer frame

• 24” • 36” • 48”

*24” and 36” panels can be specified for 48” frames, 24” panel can be specified for 36” frame

(Mountable at 5 inch increments)

3. Choose the fabric screen finishes (see finish options pg. 24)

• Powder Paint Color • Fabric Selection


• Overhead Storage bin placement adjustable on 1” increments• Overhead Storage bins can install and be relocated for easy adaptability• Overhead Storage bins can be placed side-by-side on frame• Door lock is standard• All overhead storage bins are 12” D x 16” H

• Organizer frames can accept multiple bin panels• Bin panels can install and be relocated for easy adaptability• All bin panels are 3” high.

• Steel frames surround the fabric screens with lift-and-hook for assembly • Telecom Channel and Dual Sided Power Strip hook on components cannot be put in front of Fabric Screens• Fabric Screen can also be used as a tack board

Overhead Storage BinTechWorks Overhead Storage bin provides secure storage. Door swings up and over the cabinet to optimize interiors storage space.

Parts Bin PanelsTechWorks Parts bin panels accept part bins (bins not included-available from multiple vendors) which are ideal for storage and organization of small items.

Privacy Fabric ScreenTechWorks Fabric Screen attaches between organizer frames to create a private work environment and help support increased focus in busy work areas. Screens can be mounted on front or back of the frame to give a finished appearance from either side.

��

��

��

��

��

��

��

��

��

��

� ��

��

��

��

��

��

��

16


��

��

��

��

��

��

��

��

��

HOW TO SPECIFY

1. Choose the peg board width that matches your organizer frame section


For corner inner section applications: • 20 • 26” • 32”

2. Choose the peg board height that matches your organizer frame

• 24” • 36” • 48”

*24” and 36” panels can be specified for 48” frames, 24” panel can be specified for 36” frame (Mountable at 5 inch increments)

3. Choose the peg board material

• Masonite • Steel (add suffix "S" to the item number to specify steel)

4. Choose the peg board frame finishes (see finish options pg. 24)


• Powder coat paint can be matched to TechWorks organizer frame

HOW TO SPECIFY

1. Choose the whiteboard width that matches your organizer frame section


For corner applications: • 20” • 26” • 32”

2. Choose the whiteboard height that matches your organizer frame

• 24” • 36” • 48”

*24” and 36” panels can be specified for 48” frames, 24” panel can be specified for 36” frame

(Mountable at 5 inch increments)

3. Choose single-sided or double-sided whiteboard

*add suffix “2S” to the item number to specify double sided

4. Choose the whiteboard frame finishes (see finish options pg. 24)



• Steel frames surround the peg boards with lift-and-hook for assembly • Telecom Channel and Dual Sided Power Strip hook on components can't be put in front of Peg Boards• Peg board hooks not included• Constructed of durable Masonite-brown color (only) or magnetic steel

• Steel frames surround the whiteboards with lift-and-hook for assembly • Telecom Channel and Dual Sided Power Strip hook on components can't be put in front of Whiteboards• Optional marker trays available (1-per whiteboard, not compatible with “inside” corner frame sections)• Constructed of durable Low pressure laminate-white color (only)

Peg BoardsTechWorks Peg Board attaches between organizer frames for the storage of small tools and other items within arm’s reach. Peg Boards can be mounted on front or back of the frame to give a finished appearance from either side.

WhiteboardsTechWorks Whiteboard attaches between organizer frames and create a private work environment and help support increased focus in busy work areas. Whiteboards can be mounted on front or back of the frame to give a finished appearance from either side. Double-sided Whiteboards available as well to provide a finished appearance from both sides.

��

��

� ��

��

��

��

��

��

��

��

��

� ��

��

��

��

��

��

��

��

��

� ��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

17

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��


HOW TO SPECIFY

1. Choose the power strip width that matches your organizer frame section

• 24” • 30” • 36”

2. Choose your required amps

• 15 amp • 20 amp

3. For 20 amp options (only) match to your wall receptacle type

• NEMA 5-20R Wall Receptacle • NEMA 5-L20R Wall Receptacle, Twist Lock

HOW TO SPECIFY

1. Choose your desired power strip width

• 24” (8 outlets) • 48” (16 outlets) • 60” (20 outlets) • 72" (24 outlets)

HOW TO SPECIFY

1. Choose the telecom channel width that matches your organizer frame section

• 24” • 30” • 36”

2. Choose your data plate inserts (choose up to 3 plates per telecom channel)

3. Choose your telecom channel finishes (see finish options pg. 24)



• All mounting hardware is included• Not compatible with corner and L-shaped organizer frames “inner” sections

• All mounting hardware is included• Not compatible with corner and L-shaped organizer frames “inner” sections• It is recommended that you choose a power strip width that is less than the width of your bench to ensure proper fit in side-to-side benching applications

• Not compatible with Corner or L-Shaped organizer frames “inner” sections• Two blank telecom plates included to cover unused openings• Multiple data plate configurations available• To convert USB from inline to charging add: TAETP27 USB Transformer

Power Strips - Dual Sided Power StripTechworks dual sided power strip mounts between the organizer frames and include a lighted power switch with snap in guard. Each power strip includes 6 front outlets, 6 rear outlets and a 15’ power cord.

Power Strips Techworks power strips mount in front of the organizer frames and include a lighted power switch with snap in guard. Each power strip includes a 15’ power cord.

Telecom ChannelTechWorks Telecom Channel mounts to between organizer frame upright and accepts up to 3 data plates (see data plate styles below)

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

TAETP24 TAETP3 TAETP25

18

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��


HOW TO SPECIFY

1. Choose the adjustable-height overhead light width that matches your organizer frames total width

• 36” • 48” • 60” • 72”

2. Choose the adjustable-height overhead light frame finishes (see finish options pg. 24)



HOW TO SPECIFY

1. Choose the magnetic fixed-height overhead light width that matches your organizer frames total width

• 36” • 48” • 60” • 72”

2. Choose the magnetic fixed-height overhead light frame finishes (see finish options pg. 24)



HOW TO SPECIFY

1. Choose the under shelf task light

• 1019WH - 17"W • EZDP - 16” LED light strip

• 15” of clearance able the organizer frame is required for adjustable overhead lights• Adjustable overhead light may interfere with the placement of components at the upper most mounting positions on organizer frames - not compatible with overhead storage bins• Compatible with back-to-back shared organizer frame applications• Not compatible with corner or L-shaped organizer frames

• Not compatible with back-to-back shared organizer frame applications• Not compatible with corner or L-shaped organizer frames

• 1019WH includes wood screws, double sided tape and magnets for mounting. - Features occupancy sensor that shuts off light after 30 minutes of no motion• EZDP includes wood screws and double sided tape for mounting

Lighting - Adjustable-Height Overhead LightTechworks Adjustable-Height Overhead Lights feature LED bulbs and provide high efficiency lighting for general tasks. Adjustable-Height Overhead Lights are UL and CSA approved and include an on/off switch and a 9’ power cord.

Lighting - Magnetic Fixed-Height Overhead LightTechworks Magnetic Fixed-Height Overhead Lights feature LED bulbs and provide high efficiency lighting for general tasks. Magnetic Fixed-Height Overheard Lights are UL and CSA approved and include an on/off switch and a 9’ power cord.

Lighting - Under Shelf Task LightingTechworks under shelf task lights feature LED bulbs and provide focused high efficiency lighting for general tasks. Under shelf task lights are UL and CSA approved and include an on/off switch.

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

1019WH

EZDP

19

��

��

��

��

��

��

��

��

��


• Gas spring perfectly counterbalances the weight of your monitor• Built in cable management elegantly hides any cables that are attached to displays• Slide-in 75mm and 100mm VESA mounting plate for quick attachment and detachment• Dual screen monitor arm not compatible with 24”, 30” or 36” organizer frames and must be mounted in the double wide “inner” uprights of the 48”, 60”, 72, or 96” organizer frames• Monitor arms available in Black (only), mounting plate can be matched to organizer frame

Monitor ArmTechWorks gas spring monitor arms attach to the organizer frame and support monitors and accessories weighting up to 14lbs and or 27” per monitor. Arms feature +90°~-45° tilt, +90°~-90° swivel and +180°~-180° rotation to help your desired viewing position Single screen monitor arm and dual screen monitor arms available.

Vertical Cable OrganizerTechWorks Vertical Cable Organizer mounts to the interior of the organizer frame upright to hold cables in place and conceal cables in the vertical uprights.

HOW TO SPECIFY

1. Choose the vertical cable organizer height that matches your organizer frame height

• 24” • 36” • 48”

2. Choose the Vertical Cable Organizer finishes (see finish options pg. 24)



HOW TO SPECIFY

1. Choose your monitor arm

• Single screen monitor arm • Dual screen monitor arm

2. Choose the monitor arm mounting plate finishes

• Powder Paint Color (if applicable)


HOW TO SPECIFY

1. Choose the vertical cable organizer width that matches your organizer frame section

• 24” • 30” • 36”

2. Choose the Cable Trough finishes (see finish options pg. 24)



• Not compatible with Corner or L-Shaped organizer frames “inner” sections.

Cable TroughTechWorks Cable Trough mounts to between organizer frame upright in on the back side of the organizer frame to hold cables in place.

20

BASE ACCESSORIES

��

��

��

��

��

��

��

��

��

��

��

��

� ��

��

��

��

��

��

��

HOW TO SPECIFY

1. Choose the model

• Fixed-Freestanding • Mobile-Freestanding • Suspended (mounts under TechWorks bench worksurfaces)

2. Choose the Pedestal paint color for Fixed or Mobile Pedestal

• Black (S5) • Silver (HK5)

3. Choose the Suspended Pedestal finish (see finish options pg. 24)



4. Add optional cushion (item CSH20) to Fixed or Mobile Pedestal

HOW TO SPECIFY

1. Choose the Utility Drawer finishes (see finish options pg. 24)


• Powder coat paint can be matched to TechWorks Bench frame

HOW TO SPECIFY

1. Choose the pull out shelf finishes (see finish options pg. 24)

• HPL Color

• Fixed, Mobile, or Suspended versions available• Optional cushion available: Adds 2" to overall height (black faux leather upholstery only)• Lock is standard• Suspended pedestal not compatible with TechWorks Corner Benches, and L-Shaped Benches

• 16”W x 13”D x 16”H• Benches 30”W or larger can accommodate up to 1 tool drawer; Benches 48”W or larger can accommodate up to 2 tool drawers• Lock is Standard• Tool drawer not compatible with TechWorks Electric Height-Adjustable Benches, Corner Benches, and L-Shaped Benches

• Weight Capacity is 60lbs• 20”W x 121/4”D• Pull out writing shelf not compatible with TechWorks Electric Height-Adjustable Benches, Corner Benches, and L-Shaped Benches• Available in HPL

PedestalsPedestals have a two-drawer Box/File configuration with each drawer featuring full width drawer pulls and full extension pressing ball-bearing slides. File drawers accommodate letter-size files.

Utility DrawerUtility Drawer mounts under the worksuface and provides storage office accessories and other small items.

Pull Out Writing ShelfPull Out Writing Shelf mounts under the Bench worksurface and pulls out on two glides to provide and additional work space.

15”W x 19.88”D x 21.75”H15”W x 19.88”D x 21.44”H 15”W x 19.88”D x 21.26”H

21

BASE ACCESSORIES

• All mounting hardware is included• Not compatible with TechWorks Electric Height-Adjustable Benches• It is recommended that you choose a power strip width that is less than the width of your bench to ensure proper fit when using in side-to-side benching applications

• Most service bars include powers strip (no power strip included with item 737)• Cable pass though not available on models without power strips• Not compatible with TechWorks Electric Height-Adjustable Benches

Power StripsPower strips mount under the work surface and include a lighted power switch with snap in guard. Each power strip includes a 15’ power cord.

Service BarsService Bars mount under the worksurface with mechanical fasteners and include opening for cable pass through and air, gas, and vacuum fixtures.

HOW TO SPECIFY

1. Choose service bar width that matches your bench width

• 48” (8 outlets) • 60” (12 outlets) • 72” (16 outlets)

Or chose item 737 for universal service bar (19” wide) without power strip

2. Choose the service bar finishes (see finish options pg. 24)


• Powder coat paint can be matched to TechWorks bench frame

HOW TO SPECIFY

1. Choose your desired power strip width

• 24” (8 outlets) • 48” (16 outlets) • 60” (20 outlets) • 72" (24 outlets)

HOW TO SPECIFY

1. Choose your keyboard tray model

• 195TKLS • 2150BL

2. Choose your keyboard tray color for item 195TKLS

• Black • White

HOW TO SPECIFY

1. Choose Cable Basket width that matches your bench width

• 48” • 60” • 72”

• Item number 195TKL available in black or white

• Cable Basket available in Black (only)• Not compatible with TechWorks Electric Height-Adjustable Benches

Keyboard TraysRetractable platform keyboard trays mount under the worksurface and include keyboard platform, 9.5” diameter mouse tray, and foam wrist rest. Trackless (item 195TKLS) and track-based (item 20150BL) models available.

Cable BasketCable basket mounts to the bench spreader bar on the Techworks bench base to organize and store cables for a cleaner workspace appearance.

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

��

195TKLS 2150BL

22

HOW TO SPECIFY


• HPL • Butcher-block • ESD (includes grounding terminus; coordinating accessories available on pg. 23) 2. Choose your

table depth

• 30” • 36”

3. Choose your table width

• 48” • 60” • 72”

4. Chose your work surface shape

• Rectangle (add suffix R to part number) • Peninsula (add suffix P to part number)



72" W Table

FRONT

TOP

• Table holds 1,000lbs evenly distributed• Table standard work surface options include HPL (High Pressure Laminate 1 1/8” thick), Butcher Block (1 ¾” thick), or ESD (Electro- Static Discharge 1 1/8” thick) with ground terminus • Attach multiple table work surfaces together using connector kit (Item # 790)• Tables available with Rectangular (add suffix R to part number) or Peninsula (add suffix P to part number) work surfaces• Full base shelf under the work surface is required • Work surface does not include grommet holes• Tables are not compatible with organizer frames and under work surface accessories

Table has 12” of travel range measuring 26” to 38” from the floor to the top of the work surface. Adjusts in 1” increments with threaded fasters. Table comes standard with leveling glides; optional casters are available (item # 350221 Caster-4pk) but will add 3” to overall bench height. Ships knocked down.

TABLES

23

FINISHES

STANDARD PAINT FINISHES (See pg. 24)

Metal is finished with our durable powder coat paint to reduce scratching, chipping and wear. All paint finishes are inspected to ensure quality and color validity.

WORK SURFACES FINISHES (See pg. 24)

FABRIC FINISHES (See pg. 24)

Fabrics for fabric screen available in a variety of colors.*Additional fabric options may be available. Please contact [email protected] to request additional information.

ESD ACCESSORIES

All TechWorks ESD worksurfaces and shelves include grounding terminus, located in the rear center of the item. Additional ESD accessories are available for use with your ESD worksurfaces and shelves. • ESD grounding bar provides a common grounding point for managing multiple ground wires• ESD wrist strap must be used with grounding jack for proper grounding• ESD grounding jack accommodates 4 standard banana jacks (on the end of wrist straps)

How to Specify1. Choose your ESD accessories • ESD grounding bar • ESD grounding jack • ESD wrist strap NOTE: SAFCO IS NOT RESPONSIBLE FOR ELECTRICAL INSTALLATIONS THAT VIOLATE LOCAL CODE. IT IS RECOMMENDED THAT AN ELECTRICIAN VERIFIES ALL PLANS AND COMPLETES INSTALLATION OF ELECTRICAL COMPONENTS.

HPL1 1/8” Thick High Pressure Laminate (HPL) is bonded with is 1” thick 45lb. density particle board particleboard. Edges are thermally bonded with PVC edge banding. Ideal for use in product testing and technology environments.

ESD HPL1 1/8” Thick Electro Static Discharge (ESD) High Pressure Laminate has a conductive layer that diffuses static electricity, which may help protect electronics. ESD work surfaces are predrilled (rear center of work surface) for grounding terminus (included with work surfaces). Other ESD accessories available (see below). Ideal for use in Clean Rooms, Device Manufacturing, Electronics Testing & Medical Environments.

HARDWOOD BUTCHER BLOCK1 ¾” Thick Hardwood work surfaces with 1/8” radius edge (no edge banding) Butcher Block work surfaces are made of kiln-dried strips which are face glued, sanded smooth and finished (standard mix of hardwoods). Butcher block work surfaces available with or without grommet holes. Ideal for use in Electrical, Industrial, & training environments.

Additional worksurface colors and materials including LPL, Stainless Steel, Phenolic Resin and Chemical Resistant Laminate may be available. Please contact [email protected] for more information.

White (G5) Tech Silver (HK5) Textured Gray (P5) Textured Graphite (DW5) Textured Black (DV5)

Designer White HPL - DSWTWhite or Black Edge Band

WI WIWI

BK BKIG

BK

Fusion Maple HPL - FUMPWhite or Black Edge Band

Fashion Gray HPL - FNGYWhite or Ice Gray Edge Band

Black HPL - BLAKWhite or Black Edge Band

Storm Gray Matrix HPLBlack Edge Band

WI

BK

Gray ESD Black ESD

Butcher Block

Palette 2155 - Birch Bark 1133 (BRB)

FR701 2100 - Silver Papler 538 (SLP)

FR701 2100 - Bayberry 486 (BYB)

Mingle - Biscuit (MBT)

24306

Off

ice

Suit

esM

eeti

ng

Esse

ntia

lsH

igh

Den

sity

St

orag

eFa

cilit

ies

Tech

nolo

gy

Furn

itur

eK-

12Ed

ucat

ion

Pers

onal

O

rgan

izat

ion

Tabl

es &

Des

ksEr

gono

mic

sSt

orag

e &

Fi

ling

Art

&

Engi

neer

ing

Seat

ing

Safco® Products marketing materials are designed to be used as sales tools for our Dealer network.

Note: All typical bench tops and organizer frame shelves are priced with High Pressure Laminate (HPL) and Bullnose 3mm edge (Black only) options. Changing options on typicals will require a change to list price.

LIST PRICE QTY. DESCRIPTION MODEL NO. EACH

1 72"W x 30"D, Bench with Laminate Top 728H 1,907.00 1 72"W x 48"H, Upper Frame 713 1,065.00 1 48"W x 18"D, Laminate Fixed Shelf 717H 751.00 1 Retractable Keyboard/Mouse Platform 2150BL 550.00 1 Full Base Shelf, 72"W x 23"D 723 459.00 3 24"W x 3"H, Part Bin Panels 758 100.00 1 24"W, Lockable Storage Bin 763 935.00 1 48"W, 15 amp Power Strip 767 420.00 1 72"W, Task Light (48"H Frames) 793L 997.00 1 24"W x 24"H, Pegboard 752 280.00 1 72"W, Wire Cable Basket 779 520.00 1 24"W x 24"H, Whiteboard 744 280.00

TW1 8,464.00


1 60"W x 30"D, Bench with Laminate Top 727H 1,780.00 1 60"W x 48"H, Upper Frame 710 971.00 1 30"W x 18"D, Lam. Fixed Shelf 798H 703.00 1 Retractable Keyboard/Mouse Platform 2150BL 550.00 1 Full Base Shelf, 60"W x 23"D 722 391.00 3 30"W x 3"H, Part Bin Panels 759 113.00 1 30"W, Lockable Storage Bin 764 1,172.00 1 60"W, 15 amp Power Strip 768 506.00 1 60"W, Task Light 792L 970.00 1 30"W x 24"H, Pegboard 755 303.00 1 60"W, Wire Cable Basket 778 424.00

TW2 8,109.00

TW1 TW2

LIST PRICEQTY. DESCRIPTION MODEL NO. EACH

1 48"W x 30"D, Corner Bench with Laminate 729H 2,197.00 1 48"W x 48"H, Upper Corner Frame 716 1,525.00 1 24"W x 18"D, Laminate Corner Shelf 720H 1,251.00 1 Retractable Keyboard/Mouse Platform 2150BL 550.00 3 24"W x 3"H, Part Bin Panels 758 100.00 1 24"W x 24"H, Pegboard 752 280.00 2 48"W, Wire Cable Basket 777 354.00

TW4 6,811.00

TW4


1 60"W x 30"D, Bench with Laminate Top 727H 1,780.00

1 60"W x 48"H, Upper Frame 710 971.00

1 60"W x 18"D, Laminate Fixed Shelf 718H 835.00 1 Partial Base Shelf, 60"W x 12"D 739 289.00

TW6 3,875.00

TW6

TechWorks® Typicals

25307

Office Suites

Seating M

eeting Essentials

High D

ensity Storage

FacilitiesTechnology Furniture

K-12Education

Personal O

rganizationErgonom

icsA

rt &

EngineeringStorage &

Filing

Tables &D

esksSafco® Products marketing materials are designed to be used as sales tools for our Dealer network.


1 48"W x 30"D, Corner Bench with Laminate Top 729H 2,197.00

1 48"W x 48"H, Upper Corner Frame 716 1,525.00

1 48"W x 18"D, Laminate Corner Shelf 720H 1,251.00

TW8 4,973.00

TW8

Note: All typical bench tops and organizer frame shelves are priced with High Pressure Laminate (HPL) and Bullnose 3mm edge (Black only) options. Changing options on typicals will require a change to list price.


1 72"W x 48"D x 30"H, Corner Bench with Lam. Top 729H05 2,658.00

1 72"W x 48"D x 48"H, Corner Upper Frame 71503 1,642.00

1 48"W x 48"D x 12"H, Laminate Corner Shelf 72012H 937.00

1 72"W x 12"D, Partial Base Shelf 740C 337.00

1 24"W x 48"H, Whiteboard 746 401.00

2 24"W x 48"H, Fabric Screen 746F 479.00

2 20"W x 48"H, Fabric Screen 746FC 466.00

1 24"W, 15 amp Power Strip, 8 outlets, 15’ Cord 765 370.00

TW10 8,235.00

TW10


2 48"W x 30"D, Bench with Laminate Top 700H 1,725.00

1 48"W x 48"H, Upper Frame 707 909.00

2 48"W x 18"D, Laminate Fixed Shelf 717H 751.00

2 Partial Base Shelf, 48"W x 12"D 738 235.00

1 Back-to-Back Shared Upper Frame Hardware Kit 733 139.00

TW11 6,470.00

TW11TW12


1 96"W x 30"D, Adjustable Bench with Lam. Top 79630H 3,087.00

2 48"W x 48"H, Upper Frame 707 909.00

2 24"W x 48"H, Fabric Screen 746F 479.00

2 24"W x 24"H, Whiteboard 744 280.00

2 24"W x 12"D 16"H, Lockable Storage Bin 763 935.00

2 24"W x 12"D, Laminate Fixed Shelf 79712H 508.00


TW12 9,690.00

TechWorks® Typicals

26308

Off

ice

Suit

esM

eeti

ng

Esse

ntia

lsH

igh

Den

sity

St

orag

eFa

cilit

ies

Tech

nolo

gy

Furn

itur

eK-

12Ed

ucat

ion

Pers

onal

O

rgan

izat

ion

Tabl

es &

Des

ksEr

gono

mic

sSt

orag

e &

Fi

ling

Art

&

Engi

neer

ing

Seat

ing


Model No. Description Weight List Price

24" Wide Benches

7024L01 24"W x 24"D, Adjustable Table with low pressure laminate surface 118 1,232.00

7024H01 24"W x 24"D, Adjustable Table with high pressure laminate surface 118 1,254.00

7024E01 24"W x 24"D, Adjustable Table with ESD laminate 118 1,474.00

7024B01 24"W x 24"D, Adjustable Table with 13⁄4" thick butcher block surface 124 1,470.00

700BN01 24"W x 24"D, Adjustable Table with 13⁄4" thick butcher block surface (no grommet, 1⁄8"radius edge) 124 1,470.00

7024S01 24"W x 24"D, Adjustable Table with Stainless Steel surface (no grommet) 130 3,252.00













30" Wide Benches



















Let Our Professional Design Staff Help You with TechWorks® Space Planning, contact your local Safco Sales Rep Group.

700L01

TechWorks® Benches

• Benches aupports up to 1,000 lbs.• Benches available in 24”, 30”, 36”, 48”, 60”, 72” and 96” widths, and 24”, 30” and 36” depths• Benches are height-adjustable from 26” to 38” (29” to 41” with caster kit)• Work surfaces constructed of 45 lb. density particle board with TFL (Thermally-Fused Laminate 1” thick), HPL (High Pressure Laminate 11⁄8”

thick) or Butcher Block (13⁄4” thick with bullnose front edge)• Bullnose T-mold front edge with 3mm PVC on remaining sides. Black only• ESD (Electro-Static Discharge 11⁄8” thick) with grounding terminus, available in Gray laminate with Black edge banding only• Stainless Steel available in select sizes with a 16-GA, type 304 finish, wrapped and welded corners (no grommets)• Chemical Resistant Laminates (White only with post formed edge), Stainless Steel, and Phenolic Resin (Black only) tops also available,

email or call for quotation• Standard 3” cable management grommets on work surfaces for ease of routing cables• Work surfaces attach with metal-to-metal fasteners• Bench base accommodates a full or partial base shelf. (Note: 24”D Benches can only accommodate partial base shelves)• Benches included welded support foot and leveler• Ships KD

27309

Office Suites

Seating M

eeting Essentials

High D

ensity Storage


K-12Education

Personal O

rganizationErgonom

icsA

rt &


Filing

Tables &D



36" Wide Benches



















48" Wide Benches70024 48"W x 24"D, Adjustable Table with low pressure laminate surface 131 1,552.00

70024H 48"W x 24"D, Adjustable Table with high pressure laminate surface 131 1,576.00

70024E 48"W x 24"D, Adjustable Table with ESD laminate 131 1,854.00

70024B 48"W x 24"D, Adjustable Table with 13⁄4" thick butcher block surface 145 1,820.00

70024BN 48"W x 24"D, Adjustable Table with 13⁄4" thick butcher block surface (no grommet, 1⁄8"radius edge) 151 1,785.00

70024S 48"W x 24"D, Adjustable Table with Stainless Steel surface (no grommet)" 145 3,767.00

700 48"W x 30"D, Adjustable Table with low pressure laminate surface 139 1,562.00





700S 48"W x 30"D, Adjustable Table with Stainless Steel surface (no grommet) 168 3,767.00





701BN 48"W x 36"D, Adjustable Table with 13⁄4" thick butcher block surface (no grommet, 1⁄8"radius edge) 183 1,994.00701S 48"W x 36"D, Adjustable Table with Stainless Steel surface (no grommet) 189 3,767.00

60" Wide Benches

















702BN 60"W x 36"D, Adjustable Table with 13⁄4" thick butcher block surface (no grommet, 1⁄8"radius edge) 207 2,531.00702S 60"W x 36"D, Adjustable Table with Stainless Steel surface (no grommet) 213 3,971.00

700L02

702

TechWorks® Benches

28310

Off

ice

Suit

esM

eeti

ng

Esse

ntia

lsH

igh

Den

sity

St

orag

eFa

cilit

ies

Tech

nolo

gy

Furn

itur

eK-

12Ed

ucat

ion

Pers

onal

O

rgan

izat

ion

Tabl

es &

Des

ksEr

gono

mic

sSt

orag

e &

Fi

ling

Art

&

Engi

neer

ing

Seat

ing



72" Wide Benches





72824BN 72"W x 24"D, Adjustable Table with 13⁄4"thick butcher block surface (no grommet, 1⁄8"radius edge) 195 2,313.00














96" Wide Benches















79636E 96"W x 36"D, Adjustable Table with ESD laminate 245 3,767.0079636B 96"W x 36"D, Adjustable Table with 13⁄4" thick butcher block surface 300 3,481.0079636BN 96"W x 36"D, Adjustable Table with 13⁄4" thick butcher block surface (no grommet, 1⁄8"radius edge) 300 3,411.0079636S 96"W x 36"D, Adjustable Table with Stainless Steel surface (no grommet) 306 4,464.00

Note: 96"W Benches have short depth 3rd leg in center for additional support

24" W Corner Benches - 24 x 24” tables do not have cutout on front.

704LCR 24"W x 24"D, Corner Adjustable Table with low pressure laminate surface 128 1,638.00

704HCR 24"W x 24"D, Corner Adjustable Table with high pressure laminate surface 128 1,667.00

704ECR 24"W x 24"D, Corner Adjustable Table with ESD laminate 128 1,962.00

704BCR 24"W x 24"D, Corner Adjustable Table with 13⁄4" thick butcher block surface 134 1,960.00

704BNCR 24"W x 24"D, Corner Adjustable Table with 13⁄4" thick butcher block surface (no grommet, 1⁄8"radius edge) 134 1,960.00













79630

705BNCR

TechWorks® Benches

29311

Office Suites

Seating M

eeting Essentials

High D

ensity Storage


K-12Education

Personal O

rganizationErgonom

icsA

rt &


Filing

Tables &D


60" W Corner Benches

73624 60"W x 24"D, Corner Adjustable Table with low pressure laminate surface 182 2,150.00

73624H 60"W x 24"D, Corner Adjustable Table with high pressure laminate surface 182 2,346.00

73624E 60"W x 24"D, Corner Adjustable Table with ESD laminate 182 2,842.00

73624B 60"W x 24"D, Corner Adjustable Table with 13⁄4" butcher block surface* 222 3,363.00

73624BN 60"W x 24"D, Corner Adjustable Table with 13⁄4" thick butcher block surface (no grommet, 1⁄8"radius edge)* 222 3,363.00




736B 60"W x 30"D, Corner Adjustable Table with 13⁄4" thick butcher block surface* 232 3,830.00


736L01 60"W x 36"D, Corner Adjustable Table with low pressure laminate surface 206 2,315.00

736H01 60"W x 36"D, Corner Adjustable Table with high pressure laminate surface 206 2,565.00

736E01 60"W x 36"D, Corner Adjustable Table with ESD laminate 206 3,058.00

736B01 60"W x 36"D, Corner Adjustable Table with 13⁄4" thick butcher block surface* 246 4,019.00

736BN01 60"W x 36"D, Corner Adjustable Table with 13⁄4" thick butcher block surface (no grommet, 1⁄8"radius edge)* 246 4,019.00

*Two piece top





743BN 72"W x 30"D, Corner Adjustable Table with 13⁄4" butcher block surface (no grommet, 1⁄8"radius edge)* 247 6,588.00

7436B 72"W x 36"D, Corner Adjustable Table with 13⁄4" butcher block surface* 270 6,755.00

7436BN 72"W x 36"D, Corner Adjustable Table with 13⁄4" butcher block surface (no grommet, 1⁄8"radius edge)* 270 6,755.00

*Two piece top

L Shaped Benches

72924L05 72"W x 48" x 24"D, - L.H. Adjustable "L" Table with low pressure laminate surface 161 2,397.00

72924H05 72"W x 48" x 24"D, - L.H. Adjustable "L" Table with high pressure laminate surface 161 2,538.00

72924L07 72"W x 48" x 24"D, - R.H. Adjustable "L" Table with low pressure laminate surface 161 2,397.00

72924H07 72"W x 48" x 24"D, - R.H. Adjustable "L" Table with high pressure laminate surface 161 2,538.00

72924E07 72"W x 48" x 24"D, - R.H. Adjustable "L" Table with ESD surface 161 3,071.00



729E05 72"W x 48" x 30"D, - L.H. Adjustable "L" Table with ESD surface 167 3,191.00






729E08 72"W x 48" x 36"D, - L.H. Adjustable "L" Table with ESD surface 189 3,298.00




790 Connector kit *(two brackets to secure side-by-side benches) 2 70.00

736

790

729L05


















* Two piece top

TechWorks® Benches

30312

Off

ice

Suit

esM

eeti

ng

Esse

ntia

lsH

igh

Den

sity

St

orag

eFa

cilit

ies

Tech

nolo

gy

Furn

itur

eK-

12Ed

ucat

ion

Pers

onal

O

rgan

izat

ion

Tabl

es &

Des

ksEr

gono

mic

sSt

orag

e &

Fi

ling

Art

&

Engi

neer

ing

Seat

ing


713

716


70502 24"W x 24"H, Upper Frame 20 534.00

70602 24"W x 36"H, Upper Frame 23 557.00

70702 24"W x 48"H, Upper Frame 25 578.00

70505 30"W x 24"H, Upper Frame 22 557.00

70605 30"W x 36"H, Upper Frame 24 592.00

70705 30"W x 48"H, Upper Frame 27 642.00

70503 36"W x 24"H, Upper Frame 24 583.00

70603 36"W x 36"H, Upper Frame 26 644.00

70703 36"W x 48"H, Upper Frame 29 694.00

705 48"W x 24"H, Upper Frame* 31 741.00

706 48"W x 36"H, Upper Frame* 35 800.00

707 48"W x 48"H, Upper Frame* 39 909.00Order two frames for 96”W bench.

708 60"W x 24"H, Upper Frame 42 817.00

709 60"W x 36"H, Upper Frame 45 902.00

710 60"W x 48"H, Upper Frame 51 971.00

711 72"W x 24"H, Upper Frame 53 902.00

712 72"W x 36"H, Upper Frame 59 983.00

713 72"W x 48"H, Upper Frame 67 1,065.00

70524 24"W x 24"H, Upper Corner Frame* 55 888.00



*Consists of one 20"W frame section, each side. (inside Dimensions)



71403 30"W x 48"H, Upper Corner Frame* 73 1,027.00

*Consists of one 26"W frame section, each side. (inside dimensions)




*Consists of one 32"W frame section, each side. (inside Dimensions)




*Consists of one 24"W outer frame section and one 20"W inner frame section, each side.




*Consists of one 30"W outer frame section and one 26"W inner frame section, each side.

71101 72"W x 72"D x 24"H, Upper Corner Frame* 62 1,495.00



*Consists of two 24"W outer frame sections and one 20"W inner frame section, each side.

71502 72"W x 48"D x 24"H, Upper "L" Frame* 64 1,451.00



* Consists of two 24"W outer frame sections and one 20"W inner frame section for the 72"W side. 48"W side consists of one 24"W outer frame section and one 20" W inner frame section.

733 Back-to-Back Shared Upper Frame Hardware Kit 14 139.00

73303 Back-to-Back organizer frame brace (used with 2 organizer frames) 7 75.00

71502

733

TechWorks® Organizer Frames

• Attaches to top of TechWorks® benches• 14-gauge cold rolled steel construction, frames support a maximum load

rating of 400 lbs. (Evenly balanced)• Available in 24", 36"and 48" Heights; 24", 30", 36", 48", 60" and 72"

Widths; 30", 36", 48", 60" corner assemblies; and 72 x 48" L assemblies• Mechanically fastened to work surfaces• Uprights are slotted in 1" increments for maximum height adjustability of

components• 48” and higher frames have higher gusset

• Organizer frames incorporate both horizontal and vertical integrated cable management options without requiring external cable channels

• Organizer frames incorporate openings for bench top grommets• Order surfaces with grommets when using an organizer frame• Inner frame section of corner units will not fi t all accessories• Recommended powder coat paint fi nishes: Textured Black, Graphite, Gray

or choose from the Safco® Corporate Color program• Back-to-Back bench applications with shared organizer frame require 733 kit• Ships KD

31313

Office Suites

Seating M

eeting Essentials

High D

ensity Storage


K-12Education

Personal O

rganizationErgonom

icsA

rt &


Filing

Tables &D

esksSafco® Products marketing materials are designed to be used as sales tools for our Dealer network. TechWorks® Shelves

18”D 12”D Weight 12"D 18"DModel No. Model No. Description 12"D, 18"D List Price List Price

797 79712 24"W, Low Pressure Laminate Fixed Shelf 22, 29 450.00 599.00

797H 79712H 24"W, High Pressure Laminate Fixed Shelf 22, 29 508.00 681.00

797E 79712E 24"W, ESD Fixed Shelf 22, 29 572.00 763.00

797T 24"W, High Pressure Laminate Tilt Shelf 714.00

797TH 24"W, Low Pressure Laminate Tilt Shelf 797.00

797TE 24"W, ESD Tilt Shelf 880.00

Add 12 after fi rst 3 digits to signify 12"D shelf, ex. 79712H (24"W x 12"D, High Pressure Laminate Shelf).




798T 30"W, Low Pressure Laminate Tilt Shelf 763.00

798TH 30"W, High Pressure Laminate Tilt Shelf 844.00















717TE 48"W, ESD Tilt Shelf 1,053.00








Add 12 after fi rst 3 digits to signify 12"D shelf, ex. 71812H (60"W x 12"D High Pressure Laminate Shelf).



719E 71912E 72"W, ESD Fixed Shelf 47, 61 790.00 1,053.00


719TH 72"W, High Pressure Laminate Tilt Shelf" 1,084.00



719 719T

• Available in 24", 30", 36", 48", 60" and 72" Widths at an 18" or 12" Depth. Corner Shelves also available• Cantilevered shelves are height-adjustable on 1" increments and relocate without the use of tools for ease

of adaptability• Tilt shelves have full-length raised safety edge to prevent forward slippage of stored equipment. Shelves are

positioned at 0˚, 5˚ or 10˚ angles• Tilt shelves not available in 12" depth• Weight capacity of fi xed and tilt shelf is 200 lbs. Corner shelf is 250 lbs.• ESD shelves ship with grounding terminal• Powder coat paint and Laminate fi nish matched to TechWorks® Bench/Organizer Frame

32314

Off

ice

Suit

esM

eeti

ng

Esse

ntia

lsH

igh

Den

sity

St

orag

eFa

cilit

ies

Tech

nolo

gy

Furn

itur

eK-

12Ed

ucat

ion

Pers

onal

O

rgan

izat

ion

Tabl

es &

Des

ksEr

gono

mic

sSt

orag

e &

Fi

ling

Art

&

Engi

neer

ing

Seat

ing


TABLE BASE SHELVES


72423 Full Base Shelf, 24"W x 23"D 15 304.00














CORNER APPLICATIONS


721C Full Corner Base Shelf 48"W x 23"D 33 372.00



738C Partial Corner Base Shelf 48"W x 12"D 16 247.00



*Corner base shelves are installed along one side of the corner unit. Only one shelf can be used per upper or lower crossbar.

18”D 12”D Weight 12"D 18"DModel No. Model No. Description 12"D, 18"D List Price List Price

72024 7202412 24"W, Low Pressure Laminate Corner Shelf 32, 42 693.00 924.00

72024H 7202412H 24"W, High Pressure Laminate Corner Shelf 32, 42 756.00 1,009.00

72024E 7202412E 24"W, ESD Corner Shelf" 32, 42 865.00 1,152.00

Add 12 after fi rst 5 digits to signify 12"D shelf, ex. 7202412H (24"W x 12"D Corner High Pressure Laminate Shelf).

72030 7203012 30"W, Low Pressure Laminate Corner Shelf 40, 53 743.00 990.00


72030E 7203012E 30"W, ESD Corner Shelf 40, 53 914.00 1,220.00

Add 12 after fi rst 5 digits to signify 12"D shelf, ex. 7203012H (30"W x 12"D, Corner High Pressure Laminate Shelf).

72036 7203612 36"W, Low Pressure Laminate Corner Shelf 47, 64 790.00 1,054.00


72036E 7203612E 36"W, ESD Corner Shelf 47, 64 963.00 1,283.00


720 72012 48"W, Low Pressure Laminate Corner Shelf* 64, 85 875.00 1,168.00

720H 72012H 48"W, High Pressure Laminate Corner Shelf* 64, 85 937.00 1,251.00

720E 72012E 48"W, ESD Corner Shelf 64, 85* 1,054.00 1,403.00


*Use 48"W Corner Shelf for 72 x 48"W "L" and 72 x 72" Corner Upper Frame applications.

741 74112 60"W, Low Pressure Laminate Corner Shelf 80, 106 956.00 1,276.00

741H 74112H 60"W, High Pressure Laminate Corner Shelf 80, 106 1,023.00 1,364.00

741E 74112E 60"W, ESD Corner Shelf 80, 106 1,139.00 1,518.00

Add 12 after fi rst 3 digits to signify 12"D shelf, ex. 74112H (60"W x 12"D High Pressure Laminate Shelf).

720

TechWorks® Corner Shelves

Full Base shelves can only be used with 30 or 36 inch deep benches. They will not fi t on a 24 inch deep bench. 24 inch deep benches can only accommodate Partial Base shelves.

• Shelves rest and are positioned in 2 pre-set locations on the lower or upper cross bars on bench base legs• 14-gauge cold rolled steel• Weight capacity of Full Base or Partial Base Shelf is 400 lbs. each

33315

Office Suites

Seating M

eeting Essentials

High D

ensity Storage


K-12Education

Personal O

rganizationErgonom

icsA

rt &


Filing

Tables &D

esksSafco® Products marketing materials are designed to be used as sales tools for our Dealer network. TechWorks® Tables

• Tables support up to 1,000 lbs.• Tables available in 48”, 60”, 72” widths; 30” and 36” depths• Tables are height-adjustable from 26” to 38” (29” to 41” with caster kit)• For mobile tables order caster kit 350221• Work surfaces available in Rectangular (R) and Peninsula (P) tops. Add (R) or (P) to end of part number (7744HP)• Work surfaces constructed of 45 lb. density particle board with TFL (Thermally-Fused Laminate 1" thick), HPL (High Pressure Laminate 11⁄8" thick) or Butcher Block

(13⁄4" thick with 1⁄8" with bullnose front edge)• 3mm PVC on all sides. Black only• ESD (Electro-Static Discharge 11⁄8” thick) with grounding terminus, available in Gray laminate with Black edge banding only• Chemical Resistant Laminates (White only with post formed edges), Stainless Steel and Phenolic Resin (Black only) work surfaces also available, call for quotation• Work surfaces attach with metal-to-metal fasteners• Tables included welded support foot and leveler• Ships KD













7746B 60"W x 30"D, Adjustable Table with 13⁄4" butcher block surface 187 2,518.00













ELECTRIC HEIGHT-ADJUSTABLE TABLES

• Bullnose T-mold front edge with 3mm PVC on remaining sides. Black only

• Table range is 25” to 50”

• Standard 3” cable management grommets on work surfaces for ease of routing cables

• 45 lb. density particle board with HPL (High Pressure Laminate 11⁄8" thick) with bullnose from edge

or Butcher Block (13⁄4" thick with bullnose front edge or 1⁄8" radius edge no grommets)

• Supports 1,000 lbs. and has welded support foot and leveler

• Recommended paint fi nishes: Textured Black, Graphite, Gray or choose from the Safco® Corporate Color program

• Caster option - kit number 350221

• Ships KD


700HHA 48"W x 30"D, Height-Adjustable Table with high pressure laminate surface with grommets 165 5,291.00

700BHA 48"W x 30"D, Height-Adjustable Table with butcher block surface with grommets 184 5,543.00


727BHA 60"W x 30"D, Height-Adjustable Table with butcher block surface with grommets 208 6,106.00


728BHA 72"W x 30"D, Height-Adjustable Table with butcher block surface with grommets 232 6,155.00727HHA

7744HP

7744BR

34316

Off

ice

Suit

esM

eeti

ng

Esse

ntia

lsH

igh

Den

sity

St

orag

eFa

cilit

ies

Tech

nolo

gy

Furn

itur

eK-

12Ed

ucat

ion

Pers

onal

O

rgan

izat

ion

Tabl

es &

Des

ksEr

gono

mic

sSt

orag

e &

Fi

ling

Art

&

Engi

neer

ing

Seat

ing

Safco® Products marketing materials are designed to be used as sales tools for our Dealer network.TechWorks® Accessories


787 ESD Wrist Strap 2 99.00

788 ESD Grounding Jack 3 104.00

789 ESD Grounding Bar .5 178.00

ESD ACCESSORIES

Grounding Bar

• Must be wired in compliance with local electrical codes • Wrist strap must be used with Grounding Jack for proper grounding• Grounding bar provides common grounding point • Grounding Jack accommodates 4 standard banana jacks for managing multiple ground wires (on the end of wrist straps)

SERVICE BARS

• Attached with wood screws to the underside of work surfaces • Includes openings for cable pass through (not available on 737), air, or shelves gas and vacuum fixtures• Most include power strip


730 Service Bar 48" 15 amp power strip, 8 outlets, 15' cord 8 585.00



737 Service Bar no power strip, 19"W 3 107.00731

POWER STRIPS

• 765, 767, 768, 769 mount horizontally outside organizer frame, under work surface, or to bench spreader. All other power strips mount to organizer frame slots• All mounting hardware included• Lighted power switch with snap in guard• All power strips will not fi t into the inner corner sections of organizer frames in corner or "L" shaped organizer frames


765 24"W, 15 amp Power Strip, 8 outlets, 15' cord 3 370.00




Input: NEMA 5-15P, Output: NEMA 5-15R, Requires NEMA 5-15R Wall receptacle.

76509 24"W, 15 amp Power Strip, 6 front/6 rear outlets, 15' cord 4 335.00


76511 36"W, 15 amp power strip, 6 front/6 rear outlets, 15' cord 5 335.00









Input: NEMA L5-20P, Output: NEMA 5-20R, Requires NEMA L5-20R Wall receptacle, twist lock.

KEYBOARD OPTIONS


195TKLS Trackless Keyboard/Mouse Platform 19”W x 91⁄4”D, 91⁄2”Dia. Mouse Platform* 14 586.00

2150BL Trackless Keyboard/Mouse Platform 17"W x 213⁄4"D, 91⁄2"Dia. Mouse Platform, Black 14 586.00

250100 Wire Keyboard Holder. Chrome finish. 3 148.00

250101 Dual Wire Keyboard Holder. Chrome finish. 4 254.00250100

* 195TKLS Available in Black or White.

250101 195TKLS 2150BL

35317

Office Suites

Seating M

eeting Essentials

High D

ensity Storage


K-12Education

Personal O

rganizationErgonom

icsA

rt &


Filing

Tables &D

esksSafco® Products marketing materials are designed to be used as sales tools for our Dealer network. TechWorks® Accessories

PART BIN PANELS

• 24”, 30”, 36”, 48”, 60” and 72”W organizer frames accept multiple bin strips• Accepts optional part bins from multiple vendors• Hook-on components cannot be placed in front of bin strips


758 24"W x 3"H, Part Bin Panel 3 100.00



FREE STANDING STORAGE


PH20SM Box/File Mobile Pedestal, 15"W x 20"D x 213⁄4"H 60 447.00

PH20SF Box/File Fixed Pedestal, 15"W x 20"D x 213⁄4"H 60 447.00

PH20SW Box/File Suspended Pedestal, 15"W x 20"D x 213⁄4"H* 55 544.00

CSH20 Black Faux Leather Cushion, Velcro® attached 6 231.00

*For mounting under TechWorks® bench surface

OVERHEAD STORAGE

• Door swings up and over the cabinet to optimize interior space• Door lock is standard• Locks are keyed differently• Non-removable core


763 24"W x 12"D x 16"H, Lockable Storage Bin 37 935.00

764 30"W x 12"D x 16"H, Lockable Storage Bin 50 1,172.00

76402 36"W x 12"D x 16"H, Lockable Storage Bin 62 1,332.00

UTILITY DRAWER


TWDRWR 16"W x 6"H x 121⁄2"D, Utility Drawer with Lock 5 483.00

PULL OUT WRITING SHELF


797H02 20"W x 121⁄4"D, Pull-out Writing Shelf 19 263.00

TELECOM CHANNEL

• Accepts up to 3 Data Plate Kits (see Data Telecom Plate Kits• Two blank Telecom Plates included to cover unused openings• Attaches to organizer frame


TWDA24 24"W x 3"H, Telecom Channel 4 181.00

TWDA30 30"W x 3"H, Telecom Channel 4 194.00

TWDA36 36"W x 3"H, Telecom Channel 5 205.00TWDA24

• Box/File Pedestal in a two drawer confi guration• Full width drawer pull• File drawers accommodate letter-size fi les• Fixed, mobile or work surface suspended models• Locks standard with core removable locks

• Full extension precision ball-bearing slides• Optional faux Black Leather cushion available transform

pedestal into a seat (adds 2" to height)• Mobile pedestal in Black-S5 or Silver-HK5

• Locking drawer mounts under front of work surface• All hardware included

• Pulls out from under worksurface on two glides• Supports a maximum of 60 lbs.

• 20"W writing surface• Can be specifi ed to be same material as worksurface

36318

Off

ice

Suit

esM

eeti

ng

Esse

ntia

lsH

igh

Den

sity

St

orag

eFa

cilit

ies

Tech

nolo

gy

Furn

itur

eK-

12Ed

ucat

ion

Pers

onal

O

rgan

izat

ion

Tabl

es &

Des

ksEr

gono

mic

sSt

orag

e &

Fi

ling

Art

&

Engi

neer

ing

Seat

ing


LIGHTS

• Allow 15"clearance above frame for height-adjustable light• Overhead lights include an On/Off switch• Adjustable overhead light may interfere with the placement of components at the upper most mounting positions• Overhead lights include a 9’ Power cord• UL and CSA approved• 799 under shelf light not recommended for use under Overhead Storage bins• Back-to-Back shared organizer frame applications use adjustable-height lights• EZDP includes wood screws and double sided tape for mounting and 6’ Power Cord with capacitive touch On/Off switch


72436L 36"W x LED Adjustable-Height Overhead Light 50 807.00




79136L 36"W x LED Magnetic Fixed-Height Overhead Light 45 807.00




799 131⁄2”W x 13⁄4”D x 7⁄8”H, under shelf LED task light 8 210.00

799A 221⁄2"W x 13⁄4"D x 7⁄8"H, under shelf LED task light 8 210.00

EZDP Light, LED 16" Under Cabinet 1 227.00

CABLE MANAGEMENT

Cable Trough (Mounts between organizer frame uprights)


775 24"W, Horizontal Cable Management 2 89.00



Will not fi t into the inner corner sections or in “L” shaped organizer frames.Snaps in back of frame.

Cable Basket (Mounts to table base)


777 48"W, Horizontal Cable Management, Black 4 354.00



Goes on spreader on table base.

775

777

782

Vertical Cable Organizer (Mounts to interior of frame uprights)


780 24"H, section of Vertical Cable Management 2 151.00

781 36"H, section of Vertical Cable Management 2.5 199.00

782 48"H, section of Vertical Cable Management 3 270.00

CASTER KITS


742 Caster Kit (5) for corner units 9 240.00

350221 Caster Kit (4) 7 195.00

TechWorks® Accessories

• Casters will add 3" of height to bench• Kit includes (2) casters without locking mechanism and (2) locking casters which lock the wheel• ESD Tread is hard rubber• Load capacity of each caster is 250 lbs.

37319

Office Suites

Seating M

eeting Essentials

High D

ensity Storage


K-12Education

Personal O

rganizationErgonom

icsA

rt &


Filing

Tables &D

esksSafco® Products marketing materials are designed to be used as sales tools for our Dealer network. TechWorks® Accessories

756

PEG BOARDS


752 24"W x 24"H, Peg Board 6 280.00

753 24"W x 36"H, Peg Board 7 331.00

754 24"W x 48"H, Peg Board 8 384.00

755 30"W x 24"H, Peg Board 7 303.00

756 30"W x 36"H, Peg Board 8 355.00

757 30"W x 48"H, Peg Board 9 395.00

75724 36"W x 24"H, Peg Board 7 314.00

75730 36"W x 36"H, Peg Board 8 366.00

75736 36"W x 48"H, Peg Board 9 407.00

Corner Applications

752C 20"W x 24"H, Peg Board* 5 280.00

753C 20"W x 36"H, Peg Board* 6 331.00

754C 20"W x 48"H, Peg Board* 7 384.00

*For use in the inner corner frame sections of the 72” x 48” W “L”, 24”W and 48”W Corner Organizer Frames.

7526C 26"W x 24"H, Peg Board* 6 291.00

7536C 26"W x 36"H, Peg Board* 7 340.00

7546C 26"W x 48"H, Peg Board* 8 392.00

*For use in the inner corner frame sections of the 60”W and 30”W Corner Organizer Frames.

7522C 32"W x 24"H, Peg Board* 7 291.00

7532C 32"W x 36"H, Peg Board* 8 340.00

7542C 32"W x 48"H, Peg Board* 9 392.00

*For use in the inner corner frame section of the 36”W Corner Organizer Frame.


783 31⁄2" Rack Rail Adapter Set (2U) 24" Spacing 2 151.00

784 7" Rack Rail Adapter Set (4U) 24" Spacing 3 270.00

785 31⁄2" Rack Rail Adapter Set (2U) 30" Spacing for 60"W Frames 2 178.00

786 7" Rack Rail Adapter Set (4U) 30" Spacing for 60"W Frames 3 291.00

For mounting electrical.

RACK MOUNT ADAPTERS

• Provides 19" EIA standard rack mounting between uprights• Standard with cage nuts for mounting equipment

784

FLAT PANEL MONITOR SUPPORT BRACKET

• Compatible with VESA compliant monitors only• 25 lb. capacity


FPD2TW Monitor Support – Two Arms (mounts to frame) 4 224.00

• Attaches between frame uprights• Creates a finished panel appearance from front• Hooks not supplied

• Use corner applications to fi t inner corner frame depending on frame size• Allows most hook-on components to be mounted in front of peg board

38320

Off

ice

Suit

esM

eeti

ng

Esse

ntia

lsH

igh

Den

sity

St

orag

eFa

cilit

ies

Tech

nolo

gy

Furn

itur

eK-

12Ed

ucat

ion

Pers

onal

O

rgan

izat

ion

Tabl

es &

Des

ksEr

gono

mic

sSt

orag

e &

Fi

ling

Art

&

Engi

neer

ing

Seat

ing

Safco® Products marketing materials are designed to be used as sales tools for our Dealer network.TechWorks® Accessories

748

Single Sided Double Sided (2S)Model No. Description Weight List Price List Price

744 24"W x 24"H, Whiteboard 6 280.00 354.00

745 24"W x 36"H, Whiteboard 7 331.00 422.00

746 24"W x 48"H, Whiteboard 8 401.00 488.00

747 30"W x 24"H, Whiteboard 7 303.00 559.00

748 30"W x 36"H, Whiteboard 8 355.00 625.00

749 30"W x 48"H, Whiteboard 9 414.00 692.00

74424 36"W x 24"H, Whiteboard 8 325.00 ––

74536 36"W x 36"H, Whiteboard 9 375.00 ––

74648 36"W x 48"H, Whiteboard 10 438.00 ––

750 24"W, Marker Tray for Whiteboards 1 75.00 ––



744C 20"W x 24"H, Whiteboard* 6 275.00 337.00

745C 20"W x 36"H, Whiteboard* 7 326.00 387.00

746C 20"W x 48"H, Whiteboard* 8 395.00 530.00

*For use in the inner corner frame sections of the 72" x 48"W "L", 24"W and 48"W Corner Organizer Frames.

7446C 26"W x 24"H, Whiteboard* 6 285.00 ––

7456 26"W x 36"H, Whiteboard* 7 334.00 392.00

7466 26"W x 48"H, Whiteboard* 8 406.00 472.00

*For use in the inner corner frame sections of the 60"W and 30"W Upper Corner Organizer Frames.

7442C 32"W x 24"H, Whiteboard* 7 335.00 ––

745 32"W x 36"H, Whiteboard* 8 326.00 387.00

746 32"W x 48"H, Whiteboard* 9 395.00 448.00

*For use in the inner corner frame section of the 36"W Upper Corner Organizer Frame.

WHITEBOARDS

• Attaches between frame uprights• Creates a finished panel appearance from front• Double sided Whiteboards offer an enhanced appearance when the organizer frame is seen or used from both sides• Allows some hook-on components to be mounted in front of Whiteboard• Add "2S" to the end of the model number to specify double-sided Whiteboard• Only 1 marker tray per Whiteboard (cannot be installed inside or on inner section of organizer frame)• Use corner applications to fi t inner corner frame depending on frame size

39321

Office Suites

Seating M

eeting Essentials

High D

ensity Storage


K-12Education

Personal O

rganizationErgonom

icsA

rt &


Filing

Tables &D

esksSafco® Products marketing materials are designed to be used as sales tools for our Dealer network. TechWorks®

HOW TO ORDER FABRIC SCREENS FOR TECHWORKS®

FABRIC SCREEN OPTIONS

Mod

el n

umbe

r

Fabr

ic O

ptio

n

7 4 4 2 F C S T Y Fabric Color OptionsFabric Color Order Code

SpinelTiger Eye STYSand Stone SSSGuilden SGL

LidoBalboa BALHeartland LHLBryce Canyon LBC

MingleCrystal MCTKhaki MHKBiscuit MBT

Cross TownBuff CBFRay CRAFieldstone CFS

AnchorageGoose AGS

BaileyKhaki BKH

When ordering fabric screens, use the code at right to indicate your fabric option:

• Additional fabrics are available with nominal upcharge and extended production lead time.• Call 888-971-6225 or email [email protected]

TECHWORKS® FABRIC SCREEN


744F 24"W x 24"H, Fabric Screen 6 351.00









Corner Applications

744FC 20"W x 24"H, Fabric Screen* 6 338.00



*For use in the inner corner frame sections of the 72”x 48”W “L”, 24”W and 48”W Corner Organizer Frames.




*For use in the inner corner frame sections of the 60”W and 30”W Upper Corner Organizer Frames.




*For use in the inner corner frame section of the 36”W Upper Corner Organizer Frame.

744F

• Attaches between frame uprights to create a private work environment• Creates a fi nished panel appearance from front• Use corner applications to fi t inner corner frame depending on frame size

• Allows some hook-on components to be mounted in front of fabric panel• Use corner applications to fi t inner corner frame depending on frame size

Our professional design staff can help you confi gure the perfect TechWorks® solution. Please contact your local Safco Sales Rep Group.

40322

Off

ice

Suit

esM

eeti

ng

Esse

ntia

lsH

igh

Den

sity

St

orag

eFa

cilit

ies

Tech

nolo

gy

Furn

itur

eK-

12Ed

ucat

ion

Pers

onal

O

rgan

izat

ion

Tabl

es &

Des

ksEr

gono

mic

sSt

orag

e &

Fi

ling

Art

&

Engi

neer

ing

Seat

ing

Safco® Products marketing materials are designed to be used as sales tools for our Dealer network.TechWorks® Storage Center

TECHWORKS® STORAGE CENTER

• 100% USA Manufactured• Ships ready-to-assemble on 4-position oversized pallet• Storage Center consists of: Top work surface, Center Frame, Side Frames and Spreader• Available in: 24"D, 30"D and 36"D x 63"W x 353⁄4"H• 36" work surface is not interchangeable with 24"D or 30"D base• Work surfaces Available In: 11⁄8" HPL (High Pressure Laminate), 11⁄8" ESD (Electro-Static Discharge), 13⁄4" Butcher Block, 11⁄4"Chemsurf or 11⁄2" Stainless Steel• Additional work surface fi nishes available - upcharges, minimums and extended lead times may apply. Call 1-888-971-6225 for quotation• 2 Edge Options: Standard 3mm edging on all sides or bullnose T-mold on front edge with standard edging on 3 remaining sides - Black Only for Bullnose option.

Edging: Available in corporate edge colors. Refer to Safco® Corporate Color Program. Butcher Block has no edge banding• Frame Finishes: Carob Brown, Textured Black, White, Textured Silver• Additional colors available - upcharges, minimums and extended lead times may apply. Call 1-888-971-6225 for quotation• Storage Centers can be joined together with optional ganging hardware to create a unique work environment

HPL ESD ButcherModel No. Dimension List Price List Price List Price

(HN3 Suffix) (EN3 Suffix) (BN3 Suffix)

PD24 63"W x 24"D x 36"H 2,629.00 2,766.00 2,913.00

PD30 63"W x 30"D x 36"H 2,811.00 3,021.00 3,403.00

PD36 63"W x 36"D x 36"H 3,029.00 3,266.00 3,694.00

Storage Center - Standard Edge Band (on all work surface sides)

PD30BN3

PD24HN

PD36HN

Storage Center - Bullnose Front with Standard Edgeband (Black only)

HPL ESD ButcherModel No. Dimension List Price List Price List Price

(HN Suffix) (EN Suffix) (BN Suffix)

PD24 63"W x 24"D x 36"H 2,708.00 2,775.00 3,105.00

PD30 63"W x 30"D x 36"H 2,889.00 3,032.00 3,538.00

PD36 63"W x 36"D x 36"H 3,083.00 3,277.00 3,816.00

Storage Center - Stainless Steel with Wrap Edge Stainless SteelModel No. Dimensions List Price

PD24S 63"W x 24"D x 36"H 3,882.00

PD30S 63"W x 30"D x 36"H 4,190.00

PD36S 63"W x 36"D x 36"H 5,114.00PD36S

PD30C

ChemsurfModel No. Dimensions List Price

PD24C 63"W x 24"D x 36"H 3,704.00

PD30C 63"W x 30"D x 36"H 3,933.00

PD36C 63"W x 36"D x 36"H 4,130.00

Storage Center - Waterfall Front with Chemsurf Self Edge

Our professional design staff can help you with TechWorks® space planning and custom applications. Please contact your local Safco Sales Rep Group.

41323

Office Suites

Seating M

eeting Essentials

High D

ensity Storage


K-12Education

Personal O

rganizationErgonom

icsA

rt &


Filing

Tables &D

esksSafco® Products marketing materials are designed to be used as sales tools for our Dealer network. TechWorks® Storage Center

PANEL KITS - Only can be used on TechWorks® Storage Centers

• Options for Modesty or Exterior Sides• Water Resistant Resin• Available Finishes: Millwork Cherry, Florence Walnut, White, Black Onyx

Model No. Description Weight Kit List Price

A9273 (2 each) 35"W x 347⁄10"H x 1⁄2"D, Exterior Side Panels 18 839.00

For use with 36"D work surface

A9288 (2 each) 251⁄2"W x 347⁄10"H x 1⁄2"D, Exterior Side Panels 30 818.00


A9289 (2 each) 24"W x 347⁄10"H x 1⁄2"D, Exterior Side Panels 30 767.00


A9286 (2 each) 27"W x 291⁄2"H x 1⁄4"D, Modesty Panels, universal 15 540.00

MODULAR COMPONENTS

• Components are not compatible with Techworks® Organizer Frames, Benches, or Tables.• Can be added to the underside of either the left and/or right front side of the worktable, no more than 2 across• Frame Finishes: Carob, Textured Black, White, Textured Silver• Additional colors available - upcharges, minimums and extended lead times may apply. Call 1-888-971-6225 for quotation• Purchase optional tumblers to add locking capability to modular drawers


A9349 Pullout Shelf 281⁄2"W x 21⁄2"H x 221⁄2"D 36 496.00

A9353 6" Box Drawer with Optional Locks available 50 792.00

28"W x 8"H x 221⁄2"D Overall

A9350 12" Hanging File Drawer with Optional Lock available 69 854.00

281⁄2"W x 131⁄2"H x 221⁄2"D overall

A9128 (2 each) 281⁄2"W x 3"H x 9"D, Shallow Shelf 34 223.00

A8357 (4 each) 281⁄2"W x 3"H x 9"D, Shallow Shelf Kit 65 443.00

A8391 281⁄2"W x 3"H x 21"D x 21⁄2"D, Stationary Shelf with Sides 33 211.00

A9352 281⁄2"W x 43⁄4"H x 221⁄2"D, Stationary Shelf with Sides 37 217.00

A9351 13"W x 5"H x 10"D, Undersurface Mount Cubby 7 117.00

A8357A8391

A9128

A9353

A9352A9351

A9349

A9350

REPLACEMENT LOCK & CORES

• Please read carefully to facilitate proper ordering or call Customer Care at 888-971-6225 for assistance• Drawers are shipped with removable knock-outs to add locking capability. To key alike suites of product, order the appropriate quantity of like numbered Lock Assemblies for each worktable, for Storage Center Accessories Only


Q70800 through Q70899* Lock Assembly 1 24.00

Q629A Master Key Core Removal Tool 1 24.00

*Available in Silver Only.

Q70800

42324

Off

ice

Suit

esM

eeti

ng

Esse

ntia

lsH

igh

Den

sity

St

orag

eFa

cilit

ies

Tech

nolo

gy

Furn

itur

eK-

12Ed

ucat

ion

Pers

onal

O

rgan

izat

ion

Tabl

es &

Des

ksEr

gono

mic

sSt

orag

e &

Fi

ling

Art

&

Engi

neer

ing

Seat

ing

Safco® Products marketing materials are designed to be used as sales tools for our Dealer network.TechWorks® Storage Center

KEYBOARD OPTIONS


2150BL Trackless Keyboard/Mouse Platform 17”W x 213⁄4”D, 91⁄2”Dia. Mouse Platform, Black 14 586.00

195TKLS Trackless Keyboard/Mouse Platform 19"W x 91⁄4"D, 91⁄2"Dia. Mouse Platform 14 586.00

250100 Wire Keyboard Holder. Chrome Finish. 3 148.00

250101 Dual Wire Keyboard Holder. Chrome Finish. 4 254.00

250100

250101

*195TKLS Available in Black or White.

195TKLS


787 ESD Wrist Strap 2 99.00

788 ESD Grounding Jack 3 104.00

789 ESD Grounding Bar .5 178.00

ESD ACCESSORIES

788

789

• Must be wired in compliance with local electrical codes• Grounding Bar provides common grounding point for

managing multiple ground wires

• Wrist Strap must be used with Grounding Jack for proper grounding• Grounding Jack accommodates 4 standard banana jacks (on

the end of Wrist Straps)

MONITOR ARMS

POLE-MOUNTED


EZKC1 Pole Mount, Single Arm Monitor Mount 8.2 567.00

EZKC2 Pole Mount, Dual Arm Monitor Mount 12.2 861.00

Note: Grommet Mount/field installed by installation team.

EZKC1

EZKC2

• Grommet or Tool-less Clamp installation that fits to any work surface up to 31⁄2" thick• Counterbalanced spring technology with easy-to-use Allen wrench adjustment• Slim profiles when in the folded position – ideal for limited work space applications• Arms swivel 360° around base allowing for increased display positions

• VESA 75mm and 100mm compliant• TAA compliant• Cable management system keeps cables hidden• Available in Silver only

• 24" of reach and 18" of usable height adjustment (including pole)• 4-20 lb. maximum load per each monitor arm• Quick connect monitor screen feature

*

2150BL

43325

Office Suites

Seating M

eeting Essentials

High D

ensity Storage


K-12Education

Personal O

rganizationErgonom

icsA

rt &


Filing

Tables &D

esksSafco® Products marketing materials are designed to be used as sales tools for our Dealer network. TechWorks® Storage Center

FLOOR ATTACHMENT BRACKET

• Used to anchor table to the fl oor• Hardware not included


A9290 (4) Floor Attachment Brackets, Black 1 79.00

GANGING KIT


A9159 Ganging Hardware Kit 1 15.00

POWER STRIPS


765 24"W x 11⁄4"D 15 amp Power Strip, 8 Outlet, 15’ Cord 3 370.00

PART BIN/POWER STRIP PLATE

• Multi-functional hook-on plate • Accepts optional part bins from multiple vendors or mount the 765 power strip for fl exible power placement• Hook-on modular components cannot be placed in front of Bin Strips


A9337 (2) 24"W x 3"H Part Bin Strip 9 77.00

A9337

CABLE MANAGEMENT


F861 17"W x 21⁄2"D x 21⁄2"H, Vertical or Horizontal wire management 1 39.00

A9338 (2) 281⁄4"W x 41⁄4"D x 2"H, Adjustable hanging wire management 16 186.00

EZWC6 Circular wire Mgt. Clamps. 11⁄2" Base with Adhesive Tape, 1 6.00

65" in dia. Bag of 6. Black only

A9338

Note: Slots in back of frame to hook.

Note: Mount under work surface.

Note: Slots in back of frame to hook.

• Designed to connect two Storage Centers back edges together

44326

Off

ice

Suit

esM

eeti

ng

Esse

ntia

lsH

igh

Den

sity

St

orag

eFa

cilit

ies

Tech

nolo

gy

Furn

itur

eK-

12Ed

ucat

ion

Pers

onal

O

rgan

izat

ion

Tabl

es &

Des

ksEr

gono

mic

sSt

orag

e &

Fi

ling

Art

&

Engi

neer

ing

Seat

ing


TECHWORKS® STORAGE CENTER TYPICALS

PD3


1 63"W x 30"D x 36"H, HPL PD30HN 2,889.00 Top with Black Bullnose Front Edge

3 281⁄2"W x 8"H, Locking Single Drawer A9353 792.00

2 281⁄2"W x 131⁄2"H Locking File Drawer A9350 854.00

1 60"W x 48"H Upper Frame 710 971.00

2 60"W x 18"D, Lam. Fixed Shelf 718H 835.00

PD3 9,602.00

PD4


1 63"W x 36"D x 36"H, HPL Top PD36HN3 3,029.00 with Standard Edge Band on all 4 Sides

1 (4) 281⁄2"W x 3"H, Shallow Shelf Kit A8357 443.00

2 (2) 24"W x 3"H, Part Bin Panels A9337 77.00

1 63"W x 6"D, Frame Spreader A9283 204.00

1 28"W x 8"H, Locking Single Drawer A9353 792.00

2 281⁄2"W x 131⁄2"H, Locking File Drawer A9350 854.00

1 (2) 35”W x 347⁄10”H x 1⁄2”D A9273 839.00

Exterior Side Panel Kit

PD4 6,400.00


1 63"W x 24"D, Storage Center HPL PD24HN 2,708.00 Top w/Black Bullnose Front Edge

2 281⁄2"W x 8"H, Locking Single Drawer A9353 792.00

1 (2) 27"W x 291⁄2"H x 1⁄4"D Modesty Panel Kit A9286 540.00

1 (2) 24"W x 34.69"H x 1⁄2"D A9289 767.00 Exterior Side Panel Kit

PD1 5,702.00

PD1 PD2


1 63"W x 24"D, Storage Center HPL PD24HN 2,708.00 Top w/Black Bullnose Front Edge

6 28"W x 8"H, Locking Single Drawer A9353 792.00

1 (2) 27"W x 291⁄2"H x 1⁄4"D Modesty Panel Kit A9286 540.00

1 (2) 24"W x 34.69"H x 1⁄2"D A9289 767.00 Exterior Side Panel Kit

PD2 8,871.00

TechWorks® Storage Center Typicals

TECHWORKS … · SHELF BENCH PEDESTAL BASE SHELF. 2 Organizer Frame Accessories pg. 15-19 Base...

Documents

Transcript of TECHWORKS … · SHELF BENCH PEDESTAL BASE SHELF. 2 Organizer Frame Accessories pg. 15-19 Base...