37@ ttps:l/ 5: 16k, -5-7, (0) 5..."37@ ttps:l/ 5: 16k, -5-7, (0) 5
TechnologyControl & DataLinea™ 16K Camera Link Monochrome CMOS Camera Link Line Scan Cameras 40 50...
2
Linea™ 16K Camera Link Monochrome CMOS Line Scan Cameras Key Features • High speed: up to 48 kHz • 16,384 pixel resolution • Low cost and compact • Camera Link interface Programmability • GenICam or ASCII compliant interfacing • Multiple Regions of Interest for calibration and data reduction • 8 or 12 bit output, selectable • Smart flat field and lens shading correction • 8 programmable coefficient sets Typical Applications • Automated optical inspection • Security systems • High performance sorting systems • Materials grading and inspection systems • Web inspection • General purpose machine vision Regulatory Compliance • CE, FCC and RoHS High Performance, Low Cost The new Linea™ line scan cameras deliver the exceptional performance and features found in Teledyne DALSA’s current lineup of high-end cameras at an unprecedented price point. Based on the most advanced CMOS line scan technology, the camera employs a 16k single line 3.5 µm x 3.5 µm pixel array at a 48 kHz maximum line rate. With excellent sensitivity and speed, Linea surpasses the requirements of demanding applications—such as materials grading and inspection, transportation safety, and general purpose machine vision. Linea is a compact, light weight and robust camera with many attractive features, including flat-field correction, multiple ROI, multiple user configuration sets, and calibration coefficients for various lighting conditions. GenICam™ compliant Linea is easy to set up and integrate using a GUI, such as Teledyne DALSA’s Sapera™ camera configuration utility CamExpert, or an ASCII interface using three letter commands. Models Part Number Resolution Maximum Line Rates Pixel Size LA-CM-16K05A-00-R 16,384 48 kHz 3.5 µm x 3.5 µm Specifications Resolution 16,384 pixels Line Rate Up to 48 kHz Pixel Size 3.5 µm x 3.5 µm Data Format 8 or 12 bit selectable Output Base, Medium, Full, and Deca Camera Link Lens Mount M72 x 0.75, F-mount adapter available Responsivity 80 DN / (nJ / cm 2 ) in 12 bit @ 1x gain Dynamic Range > 60 dB Nominal Gain Range 1x to 10x Size 76.0 mm x 76.0 mm x 30.7 mm Mass < 360 g Operating Temp 0 °C to 65 °C (front plate) Power Hirose 6-pin, 12 V to 24 V DC Power Dissipation < 11 W Control & Data SDR-26 mini Camera Link Compliments of Phase 1 Technology
Transcript of TechnologyControl & DataLinea™ 16K Camera Link Monochrome CMOS Camera Link Line Scan Cameras 40 50...
Linea™ 16K Camera LinkMonochrome CMOS Line Scan Cameras
Key Features • High speed: up to 48 kHz• 16,384 pixel resolution• Low cost and compact• Camera Link interface
Programmability• GenICam or ASCII compliant interfacing• Multiple Regions of Interest for
calibration and data reduction• 8 or 12 bit output, selectable• Smart flat field and lens shading
correction• 8 programmable coefficient sets
Typical Applications• Automated optical inspection• Security systems• High performance sorting systems• Materials grading and inspection
systems• Web inspection• General purpose machine vision
Regulatory Compliance• CE, FCC and RoHS
High Performance, Low CostThe new Linea™ line scan cameras deliver the exceptional performance and features found in Teledyne DALSA’s current lineup of high-end cameras at an unprecedented price point.
Based on the most advanced CMOS line scan technology, the camera employs a 16k single line 3.5 µm x 3.5 µm pixel array at a 48 kHz maximum line rate. With excellent sensitivity and speed, Linea surpasses the requirements of demanding applications—such as materials grading and inspection, transportation safety, and general purpose machine vision.
Linea is a compact, light weight and robust camera with many attractive features, including flat-field correction, multiple ROI, multiple user configuration sets, and calibration coefficients for various lighting conditions.
GenICam™ compliant Linea is easy to set up and integrate using a GUI, such as Teledyne DALSA’s Sapera™ camera configuration utility CamExpert, or an ASCII interface using three letter commands.
Models
Part Number Resolution Maximum Line Rates Pixel Size
LA-CM-16K05A-00-R 16,384 48 kHz 3.5 µm x 3.5 µm
Specifications
Resolution 16,384 pixels Line Rate Up to 48 kHzPixel Size 3.5 µm x 3.5 µm Data Format 8 or 12 bit selectableOutput Base, Medium, Full, and Deca Camera LinkLens Mount M72 x 0.75, F-mount adapter availableResponsivity 80 DN / (nJ / cm2) in 12 bit @ 1x gainDynamic Range > 60 dBNominal Gain Range 1x to 10xSize 76.0 mm x 76.0 mm x 30.7 mmMass < 360 gOperating Temp 0 °C to 65 °C (front plate)Power Hirose 6-pin, 12 V to 24 V DCPower Dissipation < 11 WControl & Data SDR-26 mini Camera Link
Compli
ments
of Pha
se 1
Techn
ology
Teledyne DALSA has its corporate offices in Waterloo, CanadaTeledyne DALSA reserves the right to make changes at any time without notice. Teledyne DALSA © 2015. Revision number 03-070-20084-02. Revision date July 06, 2015.
www.teledynedalsa.com
AmericasBoston, USA+1 [email protected]
EuropeKrailling, Germany+49 89-89-54-57-3-80 [email protected]
Asia PacificTokyo, Japan+81 [email protected]
Shanghai, China+86 [email protected]
Linea™ 16K Camera LinkMonochrome CMOS Camera Link Line Scan Cameras
40
50
60
70
80
90
sivi
ty (D
N/n
J/cm
^2)
Linea 16k Responsivity (12 bit, 1x Gain)
0
10
20
30
400 500 600 700 800 900 1000
Resp
ons
Wavelength (nm)
60%
Linea QE
50%
40%
30%
QE
(%)
20%
10%
0%400 500 600 700 800 900 1000
Wavelength (nm)
NOTES:1. UNITS: MILLIMETERS.2. IMAGE AREA IS ALIGNED TO DATUMS A B & C .
76 0.05
760.
05
(64)
380.
30
38 0.30CENTER OFIMAGE AREA
M72x0.75 - 6HFIRST PIXELREFERENCE HOLE
(64)
M4x0.7 - 6H 7.5(4X)
±0.3°
C
B
12 ± 0.3 OPTICAL DISTANCE
0.1 A0.05
IMAGEAREA
(54)
A(7) M4x0.7 - 6H 7.5
(2X) THIS SIDE(2X) FAR SIDE
(13.16)
(23.4) (22.1)
(23.6)
(20)
(21.
51)
(54) M4x0.7 - 6H 7.5(2X) THIS SIDE(2X) FAR SIDE
(7)
(36.
72)
(30.
71)
Compli
ments
of Pha
se 1
Techn
ology
