Technology Partnership Event Aberdeen 2015/11/26€¦ · •NORSOK compliant remote operated pipe...
Transcript of Technology Partnership Event Aberdeen 2015/11/26€¦ · •NORSOK compliant remote operated pipe...
AGENDA
1. Company Introduction
- Who we are
- What we do
2. Effective Tools for P&A
- The challenge
- The solution
DWELLOP AT A GLANCE - who we are
• Independent technology company
delivering topside handling equipment
for well intervention and P&A
operations.
• A new company with a long history and
high ambitions.
• Established in February 2014 as result
of an MBO.
DWELLOP AT A GLANCE - what we do
• Specializes in delivering innovative efficient well intervention and P&A equipment.
• Product range from simple CT and WL equipment to complex Work-Over Units.
• Focusing on cost-efficiency and safety.
DWELLOP AT A GLANCE - our products
In addition to these products Dwellop has a wide portefolio of other products for topside
handling during coil tubing and wireline operations.
DWELLOP AT A GLANCE - our work-over units
The Work-Over Units are based on proven technology, are fully remote operated
to ensure safe and cost-effective WI and P&A operations on wellhead and
production platforms!
TOOLS FOR EFFECTIVE P&A OPERATIONS - establish barriers to seal of and isolate a reservoir
3) Cutting and Pulling of conductor
pipe and surface casing
2) Setting reservoir barriers, i.e.
wellbore isolation and milling
1) Pulling production casing
- Reservoir diagnostics and
abandonment
12
WORK-OVER UNITS - Stand alone units for WI, P&A and Work-Over operations
Well Intervention and P&A
• CT Reel and Cabin
• Jacking frame with skidding
• Powerpack
• Casing jack
• A frame
• Pipe rack
Retrofit, P&A and Work-Over
• WI solution
• Light Drilling MDU
• Existing sub structure
• Pipe Handling system
• Power packs
• Mud system
• Cabin and Control system
Light Drilling
• Cantilever incl. Skidding
• Dwellop Drilling MDU
• Set back
• Pipe Handling System
• Power Packs
• Mud system
• Cabin & Control System
15
Well Intervention
• Cantilever incl. Skidding
• CT Tower
• CT Reel and Cabin
• Wire Line mast
• Wire line unit
• Power Pack
P&A
• WI solution
• Casing Jack
• A-Frame
• Pipe Rack
Light Drilling
• Cantilever incl. Skidding
• Dwellop Light Drilling WOU
• Pipe Handling System
• Power Packs
• Mud system
• Cabin & Control System
TOOLS FOR EFFECTIVE P&A OPERATIONS - cantileverd work-over units
TOOLS FOR EFFECTIVE P&A OPERATIONS - Dwellops contribution to a P&A operation sequence
RESERVOIR DIAGNOSTICS
PULL COMPLETION
TUBING
WELLBORE ISOLATION
AND MILLING
CUT/PULL CONDUCTORS
TOOLS FOR EFFECTIVE P&A OPERATIONS - Dwellops contribution to a P&A operation sequence
RESERVOIR DIAGNOSTICS
PULL COMPLETION
TUBING
WELLBORE ISOLATION
AND MILLING
CUT/PULL CONDUCTORS
•WIRELINE
TOOLS FOR EFFECTIVE P&A OPERATIONS - Dwellops contribution to a P&A operation sequence
RESERVOIR DIAGNOSTICS
PULL COMPLETION
TUBING
WELLBORE ISOLATION
AND MILLING
CUT/PULL CONDUCTORS
•WIRELINE •P&A UNIT
TOOLS FOR EFFECTIVE P&A OPERATIONS - Dwellops contribution to a P&A operation sequence
RESERVOIR DIAGNOSTICS
PULL COMPLETION
TUBING
WELLBORE ISOLATION
AND MILLING
CUT/PULL CONDUCTORS
•WIRELINE •P&A UNIT •JACK-UP
TOOLS FOR EFFECTIVE P&A OPERATIONS - Dwellops contribution to a P&A operation sequence
RESERVOIR DIAGNOSTICS
PULL COMPLETION
TUBING
WELLBORE ISOLATION
AND MILLING
CUT/PULL CONDUCTORS
•WIRELINE •P&A UNIT •JACK-UP •P&A UNIT
TOOLS FOR EFFECTIVE P&A OPERATIONS - Dwellops contribution to a P&A operation sequence
RESERVOIR DIAGNOSTICS
PULL COMPLETION
TUBING
WELLBORE ISOLATION
AND MILLING
CUT/PULL CONDUCTORS
•WIRELINE •P&A UNIT •WORK OVER UNIT •P&A UNIT
TOOLS FOR EFFECTIVE P&A OPERATIONS - Dwellops contribution to a P&A operation sequence
RESERVOIR DIAGNOSTICS
PULL COMPLETION
TUBING
WELLBORE ISOLATION
AND MILLING
CUT/PULL CONDUCTORS
•WIRELINE •WORK OVER UNIT •WORK OVER UNIT •WORK OVER UNIT
DWELLOP P&A UNIT - slim concept for cutting and pulling of tubulars
• Plug & Abandonment w/ CT&WL
• Slot recovery w/ CT&WL
• Casing and conductor recovery
• Tripping pipe
DWELLOP P&A UNIT - slim concept for cutting and pulling of tubulars
• Cutting and pulling unit
• Rotation table on jack
• Optional top drive for milling
• NORSOK compliant remote operated
pipe handling
• Interface to mud system and circulation
setups
• Control cabin acc. to S-002
DWELLOP P&A UNIT - capable of CT and WL operations
• The A-frame of the P&A unit is
equipped for rigging up the wire line
lubricator stack for running slick line
• Optional multiple pad eyes and extra
winch for running E-line operations or
braided wires with different sheave
dimensions.
• CT jacking frame fits on
DWELLOP P&A UNIT - slim concept for cutting and pulling of tubulars
• Low day rates
• Low POB / 3-4 people
• Fully skid able
• Fast mobilization/demobilization
• Compact design
• Modularized to be lifted with existing
platform cranes
• Limited interface
DWELLOP WORK OVER UNIT - WI, P&A and Work-Over operations
• Work Over
• Plug & Abandonment
• Slot recovery
• Pulling/Cutting of old casing/tubing
• Set new casing/tubing
• ESP change-out
• Setting whip stock and drill shorter
side tracks.
• Wire line / coiled tubing work
DWELLOP WORK OVER UNIT - WI, P&A and Work-Over operations
• NORSOK pipe handling
• 250 MT Rack & pinion drive, highly
accurate
• Top drive
• Cabin with 2 ea cyber chairs
• CE marked
• NORSOK built
• Onshore drilling at the moment
DWELLOP WORK OVER UNIT - WI, P&A and Work-Over operations
• Low day rates
• Low POB
• Fully skid able
• Fast mobilization/demobilization
• Compact design
• Modularized to be lifted with existing
platform cranes
• Limited interface
TOOLS FOR EFFECTIVE P&A OPERATIONS - choosing the right tool
Platform upgrade
100 mUSD Jack-up
+ 300 kUSD/d Work-Over Unit
60 kUSD/d P&A Unit
25 kUSD/d
SIMOPS FOR P&A - increasing efficiency
• Lower day rates
• Lower POB on extra unit
• Skid able
• Fast mobilization/demobilization
• Compact design
• Modularized to be lifted with existing
platform cranes
• Reducing Platform campaign time