Technology Engineering I & II. Hand Tool Identification.

77
HAND TOOL IDENTFICATION Technology Engineering I & II

TAGS:

Transcript of Technology Engineering I & II. Hand Tool Identification.

Page 1: Technology Engineering I & II. Hand Tool Identification.

HAND TOOL IDENTFICATIONTechnology Engineering I & II

Page 2: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 3: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

An Auger bit is used to bore holes into soft materials such as wood. Can also be used with a hand drill or brace.

Page 4: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 5: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 6: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 7: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 8: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 9: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 10: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 11: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 12: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 13: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 14: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 15: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Combination wrench is also known as a box end-open end wrench.

Page 16: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 17: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 18: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 19: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 20: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 21: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 22: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 23: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 24: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 25: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 26: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 27: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 28: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 29: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 30: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 31: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 32: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 33: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 34: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 35: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 36: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 37: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 38: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 39: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 40: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 41: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 42: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 43: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 44: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 45: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 46: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 47: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 48: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 49: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 50: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 51: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 52: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 53: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 54: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 55: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 56: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 57: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 58: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 59: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 60: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 61: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 62: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 63: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 64: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 65: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 66: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 67: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 68: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 69: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 70: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 71: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 72: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 73: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 74: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 75: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 76: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

Page 77: Technology Engineering I & II. Hand Tool Identification.

Hand Tool Identification

End of Tool Identification

Complete quiz and turn in.


TOOL IDENTIFICATION

TOOL IDENTIFICATION

Hand tool with names

Hand tool with names

Hand-off Communication Tool

Hand-off Communication Tool

Tool Identification Woodworking Hand Tools Manufacturing Tech 8 th Grade.

Tool Identification Woodworking Hand Tools Manufacturing Tech 8 th Grade.

Tool Identification WRENCHES Wrenches are the most used hand tool by service technicians. Most wrenches are constructed of forged alloy steel, usually.

Tool Identification WRENCHES Wrenches are the most used hand tool by service technicians. Most wrenches are constructed of forged alloy steel, usually.

Hand Tool Identification Worksheet - Daniel Bell …danielbellconstruction.com/.../Hand-Tool-Identification-Worksheet... · Hand Tool Identification Worksheet Name: Screw driver ...

Hand Tool Identification Worksheet - Daniel Bell …danielbellconstruction.com/.../Hand-Tool-Identification-Worksheet... · Hand Tool Identification Worksheet Name: Screw driver ...

Language Identification Tool

Language Identification Tool

HAND AND POWER TOOL SAFETY - Precast Concrete · Hand and Power Tool Safety NPCA 1 HAND AND POWER TOOL SAFETY HAND AND POWER TOOL SAFETY TOOL HAZARDS Loss of eye/vision ... power

HAND AND POWER TOOL SAFETY - Precast Concrete · Hand and Power Tool Safety NPCA 1 HAND AND POWER TOOL SAFETY HAND AND POWER TOOL SAFETY TOOL HAZARDS Loss of eye/vision ... power

Hand Tool Identfication - Broken Arrow Public Schools · HAND TOOL IDENTFICATION Technology Engineering I & II. Hand Tool Identification. Hand Tool Identification An Auger bit is

Hand Tool Identfication - Broken Arrow Public Schools · HAND TOOL IDENTFICATION Technology Engineering I & II. Hand Tool Identification. Hand Tool Identification An Auger bit is

Hospital Inpatient Waste Identification Tool...IHI developed the Hospital Inpatient Waste Identification Tool. The Waste Identification Tool was designed to identify clinical and operational

Hospital Inpatient Waste Identification Tool...IHI developed the Hospital Inpatient Waste Identification Tool. The Waste Identification Tool was designed to identify clinical and operational

Mastering Hand Tool

Mastering Hand Tool

Hand Tools Identification

Hand Tools Identification

Cattle Tool Identification

Cattle Tool Identification

Hand Tool Snapshots

Hand Tool Snapshots

1910 Hand Tool

1910 Hand Tool

BF Hand Tool

BF Hand Tool

Hand Tool Identfication - Broken Arrow Public Schools › pages › uploaded_files › Hand_Tool_ID.pdf · Hand Tool Identification An Auger bit is used to bore holes into soft materials

Hand Tool Identfication - Broken Arrow Public Schools › pages › uploaded_files › Hand_Tool_ID.pdf · Hand Tool Identification An Auger bit is used to bore holes into soft materials

Ergonomic Risk Identification and Assessment - Identification and Assessment Tool

Ergonomic Risk Identification and Assessment - Identification and Assessment Tool

Tool Identification and Use

Tool Identification and Use

Tool Identification AG STRUCTURES. Terms Tools-any instrument used in doing work Hand tool- any tool operated by hand to do work Power tool- operated.

Tool Identification AG STRUCTURES. Terms Tools-any instrument used in doing work Hand tool- any tool operated by hand to do work Power tool- operated.