Technologies Australian Made - tac-tech.com.au Catalogue_Web.pdf · Technologies Australian Made...
-
Upload
hoangquynh -
Category
Documents
-
view
226 -
download
1
Transcript of Technologies Australian Made - tac-tech.com.au Catalogue_Web.pdf · Technologies Australian Made...
Product Specs, Part No:’s, Images & Technical Information
2012 CATALOGUE
Tactical
CCTV ACCESS CONTROL GSM
AC & DCPowerRackmount & wallmount supplies - selected DC models feature battery back-up
Power withBattery Backup12Vdc / 13.5Vdc & 24Vdc with onboard high output battery chargers
3G Data& VoiceAlarm transmission plus upload of panel data with single SIM & antenna
Technologies
AustralianMade
®
Australia’s PremierSecurity Power Specialist
WHAT’S INSIDE
TACTICAL
REVIEWS
P3 Reliability by design
P5 Eco Range - Australian made Eco Power
P7 Cyturion GSM - GSM & 3G Data & Alarm
P9 Tough Stuff - Tactical RPS24AC Series
P11 Power in Focus - CCTV specific designs
FEATUREP8 It’s the Law: Ohms Law & other tech
P13 Compliance: YOUR business as well as ours
INSTALLATION ACCESSORIESP4 Newly released in 2012 - screws, cable ties, etc
POWER PRODUCTSP15 12Vdc 2.5A, 5A, 10A & 20A - wall & rackmount
P17 13.5Vdc 2.5A, 5A, 10A & 20A - wall & rackmount
P19 24Vac 2A, 3A, 4A, 6A, 10A & 20A - wall & rack
P21 24Vdc & 25Vdc - 2A, 3A & 6A
P22 18Vdc 2A Linear & 4A switchmode
P23 Converters DC-DC / AC-DC & Buck Boost
POWER DISTRIBUTION & RELAYSP24 PDM Fused & Polyswitch PDM’s
RLB Buffered / Non-buffered relays
TACTICAL METALWORKP25 Australian made powder coated steel enclosures
CYTURION GSMP26 Superior remote area 3G alarm & data coverage
ContentsPRODUCT CATALOGUE 2012
CONTENTS
www.tac-tech.com.au - +61 2 8822-1888
®
Welcome to
Eco Range | P5
Remote Area 3G Data Transmission | P26
®®
TECHNOLOGIES
Inside the catalogue :Featured products from Tactical’s extensive range
CCTV POWERRackmount 24Vac High Output Supplies are
only one of the many models built for CCTV
ECO RANGE POWERAvailable in high efficiency 24Vac, 12Vdc &
13.5Vdc, Eco Range leads the industry
ACCESS CONTROL POWERAvailable in 13.5Vdc or 24Vdc versions, in
cabinets with or without PDM modules
CYTURION GSMCyturion Protector 2G & 3G GSM back-up
Pro-Data 2G & 3G offer back-up + Data
VOLTAGE CONVERTORSUltra Quiet DC-DC / AC-DC / DC-AC and
Buck Boost Converters in a small form factor
POWER DISTRIBUTIONTactical PDM modules are available with
either M205 glass fuses or polyswitches
RPS
TPS CYT PDM
2011 Established in the early 1990’s,
with the simple mandate to be the very best at what they do, Tactical Technologies has evolved to become Australia’s Premier Security Power Specialist.
Focusing on the alarm, CCTV & Access Control sectors of the industry and with a hard won reputation for quality & reliability, Tactical products are designed and manufactured in Australia for Australian conditions - making them suitable for use in some of the harshest environments on the planet.
From inception to final design our dedicated team of engineers and industry professionals ensures that each Tactical product is manufactured and tested to stringent industry standards before being despatched to a comprehensive network of resellers throughout Australia, New Zealand, South East Asia and the Middle East.
When performance and rugged reliability are paramount, specify Tactical Technologies - your power, cellular & UPS specialist.
www.tac-tech.com.au
AboutTactical
TPS TPC
“ Completing the Eco Friendly Power Puzzle “
P2
ABOUT
www.tac-tech.com.au - +61 2 8822-1888
REVIEW
Reliability At Tactical reliability is no accident - superior
design and quality of production are the hallmarks of our products
FEATURED
Cost effective 24Vac 6A
Rack Range
HIGHLIGHTS
High efficiency transformer
MOV Network
Self re-setting outputs
Since their introduction in 2005, RPS24 AC
Series Rackmount 24Vac power supplies have been available for several years and have earned an enviable reputation for rock-solid performance and reliability in the toughest environments throughout Australia, South East Asia and the Middle East.
Featuring high efficiency toroidal mains transformers, powder coated steel chassis, individual short circuit protected outputs and MOV anti-surge networks, each model within the range provides superior
performance & reliability for mission critical CCTV installations.
From their elegant anodised brushed aluminium front plates to the removable heavy duty rear mounted power connectors, the RPS24 AC Series are high quality solutions to today’s CCTV requirements.
Integrators will be pleased to note the new range of 6A models specifically designed with cost conscious applications in mind. Ask your Tactical Distributor for pricing & availability today.
AVAILABLE FROM
Authorised Tactical Distributors or visit :
www.tac-tech.com.au
Australian Designed & Manufactured
Powder coated heavy duty steel chassis
Anodised brushed aluminium front plate
Toroid transformer
MOV Anti-Surge Network
Individual short circuit protected outputs
FEATURES
Tactical rack mount supplies have been high quality industry leaders since their initial release. New 6A models offer cost effective
solutions for contemporary installations
1st & Foremost
P3
TACTICAL
www.tac-tech.com.au - +61 2 8822-1888
So, what is Tactical ‘s secret ?
1 : Superior DesignTactical employs a team of qualified engineers
and experienced industry professionals to ensure that from concept to delivered product, you receive a well thought out, quality power
solution that is not only fit for the purpose, but more often than not exceeds expectations.
2 : Local ManufactureIn the current market, where everything from groceries to flat screen TV’s is driven by the
lowest possible price point, the old adage “you get what you pay for” has never been more
relevant.
At Tactical the temptation to close local production and simply manufacture off-shore
at a fraction of the cost has been tempered by the desire to continue to provide a quality, consistently reliable product - unaffected by
marginal overseas labour policies and unknown raw material quality.
When you specify a Tactical product, you can be assured that every effort has been made to ensure that you receive the best possible
product at the lowest practical cost.
3 : Local SupportIn the security industry, when you need
technical or product support, you need the correct advice in an easy to understand format,
from experienced personnel.
Considering our reputation, we don’t expect that you’ll need support very often with Tactical products, but it’s comforting to know that if you
do, we’re here to help and here to stay.
NEW for 2012
InstallationAccessories
®
®
N645
ACCESSORIES:
Toolbox must - haves
The driving principals behind Tactical power & GSM products include not only the production of quality, reliable products, but model design which makes installation as simple and fuss free as possible. In keeping with these principals, a broad range of installation accessories is now available from your Tactical distributor.
Terminal Posts
Screws
Terminal Strips
Cable Ties
Nylon P-Clamps
P4
TECHNOLOGIESINSTALLATION
www.tac-tech.com.au - +61 2 8822-1888
THE very nature of modern
electronic security systems dictates that they be powered continuously - energy consumption over the life of the system can be considerable. Australian manufactured Eco Range security power products have been specifically designed to conserve precious resources - both manufacturing & operational. Eco Range models are smaller, lighter and
significantly more energy efficient than the models that they replace, with the added benefit of substantially less thermal output – meaning that system longevity and long term installation cooling costs are greatly improved. Eco Range models are available in 12Vdc, 13.5Vdc & 24Vac configurations and of course feature legendary Tactical reliability. Visit the website or ask your Authorised Tactical Distributor.
Eco RangeAustralian manufactured security power products specifically designed to conserve precious resources - both manufacturing and operational
Features
High Energy Efficiency
Extremely low EMI / EMC
Australian Electrical Safety & EMC
DoFT Approved
AVAILABLE FROMApproved Tactical
Distributors or visit: www.tac-tech.com.au
Certified to Australian EMC Standards:
Eco Range DC Models comply with AS/NZS CISPR 11:2004 (Class B) - making them suitable not only for Industrial applications, but Scientific, Domestic & Medical installations !
High Efficiency / Low Noise (EMI)
Other models in the rangeDon’t make your mind up yet . . .
DC-BXEco Range DC models are available as standalone power supplies or factory fitted to heavy duty powder-coated steel enclosures - with or without PDM(s).
AC-”D” SeriesEco Range 24Vac-4A & 24Vac-6A models are available with 2, 4 or 8 polyswitch equipped short circuit protected outputs - all models include MOV surge suppression.
P5
REVIEWTACTICAL
N645
www.tac-tech.com.au - +61 2 8822-1888
Q & A
Eco Range 12Vdc
Eco Range 24Vac
Eco Range 13.5Vdc
Eco Range Cabinets
Ultra Quiet, High Efficiency 12Vdc Eco Range power supplies feature high output battery chargers & are available as standalone power supplies or factory fitted to powder coated steel enclosures, with or without fused PDM modules.
24Vac Eco Range power supplies are configured with high efficiency toroid transformers, MOV surge suppression and DoFT approved mains power leads. All models are factory fitted to powder coated steel enclosures, with polyswitch PDM modules.
High Efficiency 13.5Vdc Eco Range power supplies also feature high output battery chargers & are available as standalone power supplies or factory fitted to powder coated steel enclosures, with or without fused PDM modules.
Fabricated in Australia from Australian sourced raw materials, these sturdy enclosures feature heavy gauge steel construction with welded webbing finished in tough grey powder coat for maximum expected life span.
12Vdc 2.5A & 12Vdc 5A
Questions & AnswersA simple answer to a common question
Q: The data sheet for the cameras I’m using say
“12Vdc or 24Vac” - what sort of power supply should I use ?
A: The simple answer is the
most suitable one for the
circumstances ! A few things to
consider:
* DEVICE POWER CONSUMPTION:
Current draw when powered
by 12Vdc will be approximately
double the current required
from a 24Vac supply. Not usually
an issue for small f ixed body
cameras, but significant for PTZ’s
and IR I l luminator equipped
cameras.
* CABLE DISTANCE & TYPE:
Long cable runs and l ight gauge
cable can result in significant
voltage drop. The use of 24Vac is
generally a better choice - within
certain l imits. Remember, Ohm’s
Law can be used to determine
predicted voltage drop.
* For a given current output,
24Vac supplies are generally
less costly than their 12Vdc
equivalent
13.5Vdc 2.5A & 13.5Vdc 5A
Powdercoatedsteel
24Vac 4A & 24Vac 6A Manufactured in Australia
P6
TECHNOLOGIES
®
www.tac-tech.com.au - +61 2 8822-1888
P7
REVIEWTACTICAL
®
GSM / 3G Back-up with Remote Panel Upload/Download on a single
SIM & a single antenna !
The Cyturion family of GSM & 3G models is available as back-up only (Protector / Protector 3G) and back-up + panel data transmission (Pro-Data / Pro-Data 3G ).
Protector models provide basic PSTN back-up functionality, with a suite of SMS based command & control features.
Protector is equipped with 8 digital inputs and 8 digital outputs (3 of which are SMS controllable) and an onboard battery charger.
Pro-Data models share all the features of the Protector range, with the addition of an on-board modem data pump (MDP).
The MDP allows fuss-free upload & download of control panel programming data via a GSM / 3G circuit switched data bearer. Panel programming functionality is virtually identical to PSTN / copper connectivity and is accomplished using a single SIM and a single antenna. 3G models (both Protector & Pro-Data) have been extensively tested for remote area operation on the Telstra Next G Network. Frequency specific hi-gain antenna systems (both directional & omni-directional) are available for Next G operation.
Visit the website or ask your Tactical Distributor.
CYTURIONGSM / 3G
Designed, manufactured & supported in Australia by Tactical, the Cyturion range of GSM & 3G products provide a no compromise solution for backup & data download
AVAILABLE FROMApproved Tactical
Distributors or visit: www.tac-tech.com.au
Certified to Australian A-Tick Standards.
Cyturion 3G models have been thoroughly tested for operation on the Telstra Next G® Network
GSM 2G & 3G Models
Cyturion GSM
Tactical reliability
Features
www.tac-tech.com.au - +61 2 8822-1888
P8
TECH TECHNOLOGIES
It’s the Law . . . .Ohms Law ! There is a fixed relationship between voltage (Volts / V), current (Amps / I) and
resistance (Ohms / R). In the security industry, it is this relationship that influences the correct operation of electronic security equipment connected to long (and sometimes not so long) cable runs.
It is possible to use Ohm’s Law (or an online calculator based on it) to determine the correct cable type for satisfactory operation. Careful selection of the correct cable type / gauge, rather than simply installing whatever cable happens to be on hand at the time, can mean the difference between a reliable, high performance system and one which fails to meet customer / installer expectations.
The longer the cable run between the power supply and the powered device and the more current that the device draws, the greater the problem becomes (voltage drop) - this can be complicated further by devices which do not exhibit constant current draw (such as PTZ cameras, heaters / blowers & infrared illuminators) and installations that have been pre-cabled for power using CAT5 / CAT6 data cable rather than multi-strand figure 8 security cable.
V = I R (Volts = Amps x Ohms)
I = V / R (Amps = Volts / Ohms) / R = V / I (Ohms = Volts / Amps)
An example: You have a 12Vdc security device with a manufacturer’s rated current consumption of 250mA Given a cable run of 100m, using 24 x 0.02 figure 8 security cable (manufacturer’s stated resistance approx.5 ohms) and a 13.5Vdc 2.5A Tactical power supply, the predicted approximate voltage drop can be calculated as follows:
V = A x Ω ~ 1.25 (Voltage drop) = .25A (device current consumption) x 5Ω (resistance of the cable)
With a 13.5Vdc supply we would expect the operational voltage measured at the device to be approx 12.25Vdc (13.5V - 1.25V)
Actual voltage may be lower due to termination resistance, temperature and cable quality - always allow an adequate margin.
Cat5/6 RJ45 Terminat ion
568A 568B
www.tac-tech.com.au - +61 2 8822-1888
Heavy Duty Steel ChassisCut, folded, stamped, drilled and finished from raw materials at our Western NSW facility, these heavy duty rackmount models are not the flimsy, light gauge imported versions offered by some of our “ competitors “.
Circuit Status IndicatorsFront panel mounted bi-colour LED’s offer a constant indication of circuit status. Normal operation shows LED’s as green. In the event of a short circuit, the individual LED changes from green to red to indicate a fault. The common fault LED for that bank will also change to red.
Powder Coated FinishPrepared, applied and baked inhouse to ensure consistent finish and long service life.
It’s what’s inside that counts - power
supplies are more than just black boxes !
Manufactured in Australia
Quality finish to a quality product
Colour LEDs show circuit status
tough stuff
P9 www.tac-tech.com.au - +61 2 8822-1888
It takes expertise and experience to design a reliable
high performance security power supply . . . .
Anti-Surge NetworksAll Tactical 24Vac Rackmount models feature Metal Oxide Varistor (MOV) surge suppression networks to minimise the chance of damage in the event of an operational voltage surge or spike.
Toroid TransformersTactical 24Vac models (including rackmount) have featured toroidal wound transformers for many years. Toroid transformers are simply the most energy efficient and reliable devices available for the purpose.
Approved Mains Power CableUnlike some competitors’ products, all Tactical power supplies are supplied with DoFT / Australian Electrical Safety approved 3 Pin mains power leads.
Depending upon the model, 240V mains leads are factory terminated or (as is the case for RPS24 Series Rackmount models), fitted with approved 3 Pin IEC sockets and supplied with approved plug-in power leads.
Quality Surge Protection High Efficiency Toroid
Brushed anodised aluminium
Australian Electrical Safety Approved Mains Power Leads
tough stuff
®
P10
N645
www.tac-tech.com.au - +61 2 8822-1888
Brushed AluminiumUtilising high quality anodised alloy with a brushed finish not only ensures corrosion resistance and stable mounting points, but imparts a quality appearance to high end installations.
AC POWERWall mount & 2RU Rackmount
ABOUTTactical AC supplies feature high efficiency toroidal wound transformers, MOV anti-surge networks, individual short circuit protected outputs and heavy duty powder coated steel cabinets.
SPECSAvailable in 2A, 3A, 4A, 6A, 10A & 20A configurations with a choice of 1 - 40 fused or polyswitch protected outputs (model dependant).
All models comply with Australian Electrical Safety & EMC Standards and are supplied with approved mains power leads.
Output Voltage 24Vac
Output Current 2 - 20A
Channels 1 - 40
Cabinet Steel
Toroid TransformersHigh Efficiency Toroid transformers are used exclusively throughout the Tactical CCTV range.
Toroid transformers produce less heat and electromagnetic interference than conventional transformer construction.
“24Vac power
without compromise”
If you were to ask most installers for their thoughts on the key to high performance, reliable CCTV system operation, you would likely receive a mix of
responses: “good quality cameras”, “ a decent DVR / NVR”, “ suitable camera placement” or perhaps “correct lense selection”.
Seldom, if ever, would the use of correctly specified, quality power supplies be suggested.
A troubling fact when a high percentage of system performance and reliability issues can be traced directly to inappropriately specified or incorrectly installed power supplies and/or their associated cabling. While many integrators will spend time researching and specifying appropriate cameras, recorders,
illuminators, multiplexers, etc, often the last thing considered is the power requirements for the job.
This then leads to the use of the “cheapest” supply that appears will do the job, which in turn often influences not only system performance, but longevity. It’s usually after the second or third service call that the penny finally drops and the possibility of a power related problem is considered - a costly exercise at best.
Tactical power products are designed to perform in conditions where many
others simply fail - why trust the operation of critical systems to inferior power products ? - Specify Tactical Power !
World Wide Web: http://www.tac-tech.com.au
Power in focusTactical products specifically designed for CCTV applications
Superior design and high quality local manufacturing are the keys to reliability
P11
REVIEWTACTICAL
N645
www.tac-tech.com.au - +61 2 8822-1888
REVIEW
DC POWERWall mount & 3RU Rackmount
ABOUTSpecifically configured for 12Vdc operation (rather than 13.5Vdc), these power supplies are ideal for CCTV installations which include “voltage sensitive” cameras.
SPECSAvailable in 2.5A, 5A, 10A & 20A configurations with a choice of 1 - 40 fused or polyswitch protected outputs (model dependant).
2.5A, 5A & 10A wall mount models feature integrated battery chargers.
All models are supplied with approved mains leads & comply with Australian Electrical Safety & EMC Standards.
Output Voltage 12Vdc
Output Current 1 - 20A
Channels 1 - 40
“Ultra-Quiet switchmode
regulated power”
CONVERTORSAC/DC DC/AC DC/DC
ABOUTTactical TPC Series voltage convertors feature high efficiency switchmode design coupled with extremely low EMI output - in fact this range exceeds the stringent CISPR11:2004 - Class B standard for conducted & radiated output, making it suitable for not only Industrial, but Domestic, Scientific & Medical applications.
SPECSLarge variation of input & output voltages - see model chart on page 22. All models feature extremely low EMI
Input Voltage Varies
Output Voltage Varies
Output Current Varies
Charger Varies
High EfficiencyTactical TPC Series voltage convertors feature high efficiency switchmode design with extremely low EMI output
“High output /ultra low noise voltage convertors”
High Output Battery ChargersAll Tactical 12Vdc CCTV Power Supplies are equipped with on-board high output battery chargers. Battery output is re-regulated to 12Vdc so that voltage sensitive cameras are not subjected to unsuitably high output.
P12
TECHNOLOGIES
N645
N645
www.tac-tech.com.au - +61 2 8822-1888
Compliance:YOUR businessas well as oursP13
TACTICAL Feature
www.tac-tech.com.au - +61 2 8822-1888
Feature
Compliance:YOUR businessas well as ours
Installers and resellers share a legal responsibility with manufacturers & importers to ensure the products they install or supply comply with Australian Safety Standards
The Australian electronic security market is flooded with poor quality, low cost power supplies.
Temptation to use these devices is high - but can you afford to risk the consequences ?
Installing, importing or selling non-complying electrical goods carries extremely harsh penalties.
Fines of up to $220,000 for an individual or $1.1M for a corporation and equivalent civil
penalties also apply. (Excerpt from the ACCC / Product Safety Australia Website: http://www.
productsafety.gov.au/content/index.phtml/itemId/970499)
Please take the time to read through a few of the key points below, then ask yourself :
“Why take the chance ?”
Do the security power products that you install or resell comply with Australian Electrical Safety
& EMC Standards ? (All Tactical products meet or exceed Australian Standards)
In recent years there has been a marked increase in the number of security power products sold
which do not comply with Australian Standards - either electrical safety or EMC.
Let’s face it, most security power supplies look like simple metal boxes and often the “cheapies”
outwardly appear to be similar or the same as genuine compliant products. It’s only upon closer
inspection or pointed questioning of your supplier as to the legal compliance status of the item
in question that the real picture emerges. Very often these inferior products not only fail to
comply with even basic safety standards, but due to the poor quality of components and overall
design, they represent potentially life threatening electrocution and fire hazards.
Products which fail to comply with Australian Standards are potentially electrically unsafe and
are more susceptible to causing harm to people and property. If you are an installer, contractor
or distributor who buys or installs electrical products that don’t meet Australian Standards, you
could face fines plus civil and/or criminal action.
What are the legal implications ? Under Australian law, whoever initially imports a product is
legally recognised as the distributor of the product. They are also directly liable should the
product fail or cause harm.
If proven that an installer knowingly installs product that doesn’t meet the Australian Standards
they can be deemed liable for any damage or death caused by the installation of faulty goods.
If the installer’s conduct does not meet reasonable standards and there is a high risk of causing
death (as could be the case for example where a power supply is supplied either without a mains
lead or with the mains lead not installed and the installer connects it) severe penalties could
occur - as well as potential criminal charges (including manslaughter).
Simply selling, installing or importing non-complying electrical goods could render you liable to
substantial penalties - any resultant loss or damage will not be covered by insurance. This could
result in further civil action and potentially run into millions of dollars, depending upon the
severity of the loss or damage.
So ask yourself, when weighing the initial cost saving against the potential for (at best) poor
performance or (at worst) potential penalties and legal action:
Why take the chance ?P14
TECHNOLOGIES
www.tac-tech.com.au - +61 2 8822-1888
SCAN THIS>
12Vdc
TPS12-2.5DC 12Vdc, 2.5A SMPS with 13.8V / 700MA chArger - inc. Ac FAil & low BAtt outPutS
TPS12-2.5DCB Single outPut tPS12-2.5dc Fitted to SMAll cABinet [250w x 310h x 100d MM]
TPS12-2.5DC-BD10 tPS12-2.5dc Fitted to SMAll cABinet [250w x 310h x 100d MM] 10 x 250MA outPutS
TPS12-2.5DC-BX Single outPut tPS12-2.5dc Fitted to MediuM cABinet [340w x 436h x 146d MM]
TPS12-2.5DC-BXD10 tPS12-2.5dc Fitted to MediuM cABinet [340w x 436h x 146d MM] 10 x 250MA outPutS
TPS12-5DC 12Vdc, 5A SMPS with 13.8V / 1.4A BAttery chArger - inc. Ac FAil & low BAttery relAy outPutS
TPS12-5DCB Single outPut tPS12-5dc Fitted to SMAll cABinet [250w x 310h x 100d MM]
TPS12-5DC-BD10 tPS12-5dc Fitted to SMAll cABinet [250w x 310h x 100d MM] 10 x 250MA outPutS
TPS12-5DC-BX Single outPut tPS12-5dc Fitted to MediuM cABinet [340w x 436h x 146d MM]
TPS12-5DC-BXD10 tPS12-5dc Fitted to MediuM cABinet [340w x 436h x 146d MM] 10 x 500MA outPutS
TPS12-5DC-BXD20 tPS12-5dc Fitted to MediuM cABinet [340w x 436h x 146d MM] 20 x 250MA outPutS
TPS12-5DC-ME Single outPut tPS12-5dc Fitted to lArge cABinet [480w x 465h x 180d MM]
TPS12-5DC-MED10 tPS12-5dc Fitted to lArge cABinet [480w x 465h x 180d MM] 10 x 500MA outPutS
TPS12-5DC-MED20 tPS12-5dc Fitted to lArge cABinet [480w x 465h x 180d MM] 20 x 250MA outPutS
A 12Vdc 2.5A Power SuPPlieSeco range® Single and Multiple output Models
B 12Vdc 5A Power SuPPlieSeco range® Single and Multiple output Models
A
B
TPS12-2.5DC
TPS12-2.5DC-BD10 TPS12-2.5DC-BXD10
TPS12-5DCTPS12-5DC-BXD20
P15
TACTICAL
N645
N645
Engineered for CCTV
SCAN THIS >
www.tac-tech.com.au - +61 2 8822-1888
TPS12-10DC 12Vdc, 10A SMPS with 13.8V / 1.4A BAttery chArger - inc. Ac FAil & low BAt. outPutS
TPS12-10DCB Single outPut tPS12-10dc Fitted to MediuM cABinet [340w x 436h x 146dMM]
TPS12-10DC-ME Single outPut tPS12-10dc Fitted to lArge cABinet [ 480w x 465h x 180d MM]
TPS12-10DC-BD10 tPS12-10dc Fitted to MediuM cABinet [340w x 436h x 146d MM] 10 x 1A outPutS
TPS12-10DC-BD20 tPS12-10dc Fitted to MediuM cABinet [340w x 436h x 146d MM] 20 x 0.5A outPutS
TPS12-10DC-MED10 tPS12-10dc Fitted to lArge cABinet [480w x 465h x 180d MM] 10 x 1A outPutS
TPS12-10DC-MED20 tPS12-10dc Fitted to lArge cABinet [480w x 465h x 180d MM] 20 x 0.5A outPutS
TPS12-10DC-MED40 tPS12-10dc Fitted to lArge cABinet [480w x 465h x 180d MM] 40 x 0.25A outPutS
C 12Vdc 10A Power SuPPlieShigh efficiency Single output Models
D 12Vdc 10A Power SuPPlieShigh efficiency Multiple output Models
E 12Vdc 10A & 20A rAckmount Power SuPPlieShigh efficiency 3ru rackmount Multiple output Models
C
12Vdc
D
TPS12-10DC
TPS12-10DCB
E
RPS12-10DC-D10 12Vdc 10A, 3ru rAckMount SuPPly with 10 x 1A Short Protected outPutS
RPS12-10DC-D20 12Vdc 10A, 3ru rAckMount SuPPly with 20 x 0.5A Short Protected outPutS
RPS12-10DC-D40 12Vdc 10A, 3ru rAckMount SuPPly with 40 x 0.25A Short Protected outPutS
RPS12-20DC-D20 12Vdc 20A, 3ru rAckMount SuPPly with 20 x 1A Short Protected outPutS
RPS12-20DC-D40 12Vdc 20A, 3ru rAckMount SuPPly with 40 x 0.5A Short Protected outPutS
RPS13-20DC-D20
TPS13-10DC-BD20
P16
TECHNOLOGIES
N645
N645
N645
www.tac-tech.com.au - +61 2 8822-1888
TPS13-2.5DC 13.5Vdc, 2.5A SMPS with 13.8V / 700MA chArger - inc. Ac FAil & low BAtt outPutS
TPS13-2.5DCB Single outPut tPS13-2.5dc Fitted to SMAll cABinet [250w x 310h x 100d MM]
TPS13-2.5DC-BD10 tPS13-2.5dc Fitted to SMAll cABinet [250w x 310h x 100d MM] 10 x 250MA outPutS
TPS13-2.5DC-BX Single outPut tPS13-2.5dc Fitted to MediuM cABinet [340w x 436h x 146d MM]
TPS13-2.5DC-BXD10 tPS13-2.5dc Fitted to MediuM cABinet [340w x 436h x 146d MM] 10 x 250MA outPutS
TPS13-5DC 13.5Vdc, 5A SMPS with 13.8V / 1.4A BAttery chArger - inc. Ac FAil & low BAttery relAy outPutS
TPS13-5DCB Single outPut tPS13-5dc Fitted to SMAll cABinet [250w x 310h x 100d MM]
TPS13-5DC-BD10 tPS13-5dc Fitted to SMAll cABinet [250w x 310h x 100d MM] 10 x 250MA outPutS
TPS13-5DC-BX Single outPut tPS13-5dc Fitted to MediuM cABinet [340w x 436h x 146d MM]
TPS13-5DC-BXD10 tPS13-5dc Fitted to MediuM cABinet [340w x 436h x 146d MM] 10 x 500MA outPutS
TPS13-5DC-BXD20 tPS13-5dc Fitted to MediuM cABinet [340w x 436h x 146d MM] 20 x 250MA outPutS
TPS13-5DC-ME Single outPut tPS13-5dc Fitted to lArge cABinet [480w x 465h x 180d MM]
TPS13-5DC-MED10 tPS13-5dc Fitted to lArge cABinet [480w x 465h x 180d MM] 10 x 500MA outPutS
TPS13-5DC-MED20 tPS13-5dc Fitted to lArge cABinet [480w x 465h x 180d MM] 20 x 250MA outPutS
A 13.5Vdc 2.5A Power SuPPlieSeco range® Single and Multiple output Models
B 13.5Vdc 5A Power SuPPlieSeco range® Single and Multiple output Models
A
B
TPS13-2.5DC
TPS13-2.5DC-BD10 TPS13-2.5DC-BXD10
TPS13-5DCTPS12-5DC-BXD20
13.5Vdc
P17
TACTICAL
N645
N645
Ultra-Quiet Switchmode
www.tac-tech.com.au - +61 2 8822-1888
SCAN THIS >
TPS13-10DC 13.5Vdc, 10A SMPS with 13.8V / 1.4A BAttery chArger - inc. Ac FAil & low BAt. outPutS
TPS13-10DCB Single outPut tPS13-10dc Fitted to MediuM cABinet [340w x 436h x 146dMM]
TPS13-10DC-ME Single outPut tPS13-10dc Fitted to lArge cABinet [ 480w x 465h x 180d MM]
TPS13-10DC-BD10 tPS13-10dc Fitted to MediuM cABinet [340w x 436h x 146d MM] 10 x 1A outPutS
TPS13-10DC-BD20 tPS13-10dc Fitted to MediuM cABinet [340w x 436h x 146d MM] 20 x 0.5A outPutS
TPS13-10DC-MED10 tPS13-10dc Fitted to lArge cABinet [480w x 465h x 180d MM] 10 x 1A outPutS
TPS13-10DC-MED20 tPS13-10dc Fitted to lArge cABinet [480w x 465h x 180d MM] 20 x 0.5A outPutS
TPS13-10DC-MED40 tPS13-10dc Fitted to lArge cABinet [480w x 465h x 180d MM] 40 x 0.25A outPutS
C 13.5Vdc 10A Power SuPPlieShigh efficiency Single output Models
D 13.5Vdc 10A Power SuPPlieShigh efficiency Multiple output Models
E 13.5Vdc 10A & 20A rAckmount Power SuPPlieShigh efficiency 3ru rackmount Multiple output Models
C
D
TPS13-10DC
TPS13-10DCB
E
RPS13-10DC-D10 13.5Vdc 10A, 3ru rAckMount SuPPly with 10 x 1A Short Protected outPutS
RPS13-10DC-D20 13.5Vdc 10A, 3ru rAckMount SuPPly with 20 x 0.5A Short Protected outPutS
RPS13-10DC-D40 13.5Vdc 10A, 3ru rAckMount SuPPly with 40 x 0.25A Short Protected outPutS
RPS13-20DC-D20 13.5Vdc 20A, 3ru rAckMount SuPPly with 20 x 1A Short Protected outPutS
RPS13-20DC-D40 13.5Vdc 20A, 3ru rAckMount SuPPly with 40 x 0.5A Short Protected outPutS
TPS13-10DC-BD20
RPS13-20DC-D20
13.5Vdc
P18
TECHNOLOGIES
N645
N645
N645
www.tac-tech.com.au - +61 2 8822-1888
A
B
D
E
24Vac
new! 6A eco rAnGe rAckmountlegendary tactical quality rackmount in a lighter current capacity
P19
TACTICAL
N645
Engineered for CCTV
www.tac-tech.com.au - +61 2 8822-1888
SCAN THIS >
TPS24-2A 24VAc, 2A SuPPly in Steel cABinet [224x130x80MM] 1 x 2A outPut
TPS24-3AC 24VAc, 3A SuPPly in Steel cABinet [224x130x80MM] 1 x 3A outPut
TPS24-4AC 24VAc, 4A SuPPly in Steel cABinet [224x130x80MM] 1 x 4A outPut
TPS24-6AC 24VAc, 6A SuPPly in Steel cABinet [224x130x80MM] 1 x 6A outPut
A 24VAc 2A, 3A, 4A & 6A Power SuPPlieSwall Mount - Single output Models
C
F
24Vac
TPS24-4AC-D2 24VAc, 4A SuPPly in Steel cABinet [224x130x80MM] 2 x 2A outPutS
TPS24-4AC-D4 24VAc, 4A SuPPly in Steel cABinet [224x130x80MM] 4 x 1A outPutS
TPS24-4AC-D8 24VAc, 4A SuPPly in Steel cABinet [224x130x80MM] 8 x 0.5A outPutS
TPS24-6AC-D2 24VAc, 6A SuPPly in Steel cABinet [224x130x80MM] 2 x 3A outPutS
TPS24-6AC-D4 24VAc, 6A SuPPly in Steel cABinet [224x130x80MM] 4 x 1.5A outPutS
TPS24-4AC-D8 24VAc, 6A SuPPly in Steel cABinet [224x130x80MM] 8 x 0.75A outPutS
B 24VAc 4A & 6A Power SuPPlieSeco range - Multiple output Models
TPS24-10BD-2 24VAc, 10A SuPPly in Steel cABinet [310x240x60MM] 2 x 5A outPutS
TPS24-10BD-4 24VAc, 10A SuPPly in Steel cABinet [310x240x60MM] 4 x 2.5A outPutS
TPS24-10BD 24VAc, 10A SuPPly in Steel cABinet [310x240x60MM] 10 x 1A outPutS
TPS24-10BD10R 24VAc, 10A SuPPly in Steel cABinet [310x240x60MM] 10 x 1A outPutS
TPS24-10BD-20 24VAc, 10A SuPPly in Steel cABinet [310x240x60MM] 20 x 0.5A outPutS
TPS24-10BD-20R 24VAc, 10A SuPPly in Steel cABinet [310x240x60MM] 20 x 0.5A outPutS
C 24VAc 10A Power SuPPlieSwall Mount - Multiple output Models
TPS24-20BD-4 24VAc, 20A SuPPly in Steel cABinet [340x290x105MM] 4 x 5A outPutS
TPS24-20BD-10 24VAc, 20A SuPPly in Steel cABinet [340x290x105MM] 10 x 2A outPutS
TPS24-20BD-20 24VAc, 20A SuPPly in Steel cABinet [340x290x105MM] 20 x 1A outPutS
D 24VAc 20A Power SuPPlieSwall Mount - Multiple output Models
RPS24-6AC-D2-2RU 24VAc, 6A rAckMount SuPPly [425wx270dx83hMM] 2 x 3A outPutS
RPS24-6AC-D4-2RU 24VAc, 6A rAckMount SuPPly [425wx270dx83hMM] 4 x 1.5A outPutS
RPS24-6AC-D10-2RU 24VAc, 6A rAckMount SuPPly [425wx270dx83hMM] 10 x 0.6A outPutS
RPS24-6AC-D20-2RU 24VAc, 6A rAckMount SuPPly [425wx270dx83hMM] 20 x 0.3A outPutS
E 24VAc 6A rAckmount Power SuPPlieShigh efficiency toroid - Multiple output Models
RPS24-10-D10-2RU 24VAc, 10A rAckMount SuPPly [425wx270dx83hMM] 10 x 1A outPutS
RPS24-10-D20-2RU 24VAc, 10A rAckMount SuPPly [425wx270dx83hMM] 20 x 0.5A outPutS
RPS24-10-D40-2RU 24VAc, 10A rAckMount SuPPly [425wx270dx83hMM] 40 x 0.25A outPutS
RPS24-20-D20-2RU 24VAc, 20A rAckMount SuPPly [425wx270dx83hMM] 20 x 1A outPutS
RPS24-20-D40-2RU 24VAc, 20A rAckMount SuPPly [425wx270dx83hMM] 40 x 0.5A outPutS
F 24VAc 10A & 20A rAckmount Power SuPPlieShigh efficiency toroid - Multiple output Models
P20
TECHNOLOGIES
N645
N645
Engineered for CCTV
Engineered for CCTV
www.tac-tech.com.au - +61 2 8822-1888
24Vdc & 25Vdc Power SuPPlieS
tPS25-2dc, tPS24-3dc & tPS24-6dc are state-of-the-art, ultra-quiet switchmode power supplies. Featuring high performance and extremely low noise operation (eMc), each model is equipped with an onboard battery charger, Ac Fail & low Battery relay outputs.
All models feature short circuit & overload protection, small physical footprint and low thermal output and are ideally
each model is available as a “standalone” single output supply or factory fitted to a heavy duty steel enclosure (large enough to house standby batteries). tPS24-3dc & tPS24-6dc Series models may also be ordered with individually fused tactical Power distribution Modules.
24Vdc
TPS24-3DC 24Vdc, 3A SMPS with chArger - no cABinet [273x145x80MM]
TPS24-3DC-B tPS24-3dc in Steel cABinet [340x436x145MM] 1 x 3A outPut
TPS24-3DC-ME tPS24-3dc in Steel cABinet [482x470x185MM] 1 x 3A outPut
TPS24-6DC 24Vdc, 6A SMPS with chArger - no cABinet [273x145x80MM]
TPS24-6DC-B tPS24-6dc in Steel cABinet [340x436x145MM] 1 x 3A outPut
TPS24-6DC-ME tPS24-6dc in Steel cABinet [482x470x185MM] 1 x 3A outPut
A 24Vdc 3A & 6A Power SuPPlieSSingle output
TPS24-3DC
TPS24-3DC-B
A
TPS24-3DC-MED10 tPS24-3dc in Steel cABinet [482x470x185MM] 10 x 0.3A outPut
TPS24-3DC-MED20 tPS24-3dc in Steel cABinet [482x470x185MM] 20 x 0.15A outPut
TPS24-6DC-MED10 tPS24-6dc in Steel cABinet [482x470x185MM] 10 x 0.6A outPut
TPS24-6DC-MED20 tPS24-3dc in Steel cABinet [482x470x185MM] 20 x 0.3A outPut
B 24Vdc 3A & 6A Power SuPPlieSMultiple output
TPS25-2DC 25Vdc, 2A SMPS with chArger - no cABinet [226x123x60MM]
TPS25-2DC-B tPS25-2dc in Steel cABinet [340x436x145MM] 1 x 2A outPut
C 25Vdc 2A Power SuPPlieSSingle & Multiple output
B
C
C
P21
TACTICAL
N645
www.tac-tech.com.au - +61 2 8822-1888
SCAN THIS >
D 18Vdc 2A Power SuPPlydual channel uldo (18Vdc / 12Vdc)
E 18Vdc 4A Power SuPPlydual channel SMPS (18Vdc / 12Vdc )
D
18Vdc
TPS18-2Si 18Vdc, 2A uldo lineAr SuPPly with Aux 12Vdc 150MA [192x132x90MM] TPS18-4DC 18Vdc, 4A SMPS SuPPly with Aux 12Vdc 150MA [225x120x60MM]
18Vdc Power SuPPlieS
Specifically designed for use with audio & video intercom systems, tPS18 models feature extremely low noise, high efficiency output, specifically avoiding the problem of hum and interference so common with lesser quality supplies.
tPS18-2Si is a uldo linear regulated 2A supply with an auxiliary 12Vdc output suitable to power low current draw accessories such as sounders and door strikes. tPS18-4dc features high efficiency / low noise switchmode regulation and also incorporates a 12Vdc 150mA auxiliary output.
Both models feature short circuit & overload protection, small physical footprint and low thermal output.
E
P22
TECHNOLOGIES
N645 N645
Ultra-Quiet SwitchmodeIdeal for Intercom Use
www.tac-tech.com.au - +61 2 8822-1888
dc-dc / Ac-dc / Buck BooSt conVertorS
tactical manufactures a range of dc-dc, Ac-dc & Buck Boost convertors to suit a variety of applications.
All models feature extremely quiet & reliable dc output, meeting or exceeding the extremely stringent ciSPr22 class B eMc specification.
A
B
C
D
E
Convertors
F G
A tPc1 : dc-dc / Ac-dc conVertor24Vac or 18Vdc-48Vdc converted to 12Vdc @ 1.5A Max
B tPc3 : dc-dc / Ac-dc conVertor24Vac or 9Vdc-48Vdc converted to 5Vdc @ 1.5A Max
C tPc4 : dc-dc / Ac-dc conVertor24Vac or 20Vdc - 48Vdc converted to 18Vdc @ 1A Max
D tPc24 : dc-dc / Ac-dc conVertor24Vac or 32Vdc-48Vdc converted to 24Vdc @ 1A Max
E tPc48 : dc-dc conVertor10Vdc-16Vdc converted to 48Vdc @ 1.25A Max
F tPS-BB-13 : Buck BooSt conVertor10Vdc-36Vdc converted to 12Vdc @ 1A Max
G tPS-BB-24 : Buck BooSt conVertor10Vdc-36Vdc converted to 24Vdc @ 1A Max
P23
TACTICAL
N645
Ultra-Quiet Switchmode
www.tac-tech.com.au - +61 2 8822-1888
PDM’s & Relays
Power diStriBution moduleS & relAyS
the use of tactical technologies PdM modules allows easy installation and effortless fault diagnosis for multi-camera cctV or multi-lock access control systems. tactical PdM modules feature heavy duty screw terminal blocks, individual circuit status led’s and an individual replaceable glass fuse or solid-state polyswitch for each device to provide short circuit protection.
tactical Buffered & unbuffered relays are available as 12V or 24V single devices or in strips of 8 for multiple load applications like lift control.
H
I
J
K
L M N
O
P
H Pdm1 : FuSed diStriBution moduleUp to 30V AC or DC. 10 x1A Fuses. No Fault Relay
I Pdm2 : PolySwitch diStriBution moduleUp to 30V AC or DC. 10 x1A Polyswitches. No Fault Relay
J Pdm5 : FuSed diStriBution moduleUp to 30V AC or DC. 10 x1A Fuses. With Fault Relay
K Pdm6 : PolySwitch diStriBution moduleUp to 30V AC or DC. 10 x1A Polyswitches. With Fault Relay
N rlB1-S : 12Vdc SPdt non-BuFFered relAy 12Vdc Single Pole, Double Throw Non-Buffered Relay (6A)
rlB1-S-24Vdc : 24Vdc SPdt non-BuFFered relAy 24Vdc Single Pole, Double Throw Non-Buffered Relay (6A)
M rlB1-SPdt : 12Vdc SPdt BuFFered relAy12Vdc Single Pole, Double Throw Buffered Relay (6A)
O rlB8-dP : 8 x 12Vdc dPdt BuFFered relAyStrip of 8 x 12Vdc Double Pole, Double Throw Buffered Relay
L rlB1-dPdt : 12Vdc dPdt BuFFered relAy12Vdc Double Pole, Double Throw Buffered Relay (1A)
P rlB8 : 8 x 12Vdc SPdt BuFFered relAyStrip of 8 x 12Vdc Single Pole, DT Buffered Relay
P24
TECHNOLOGIES
www.tac-tech.com.au - +61 2 8822-1888
High Quality ENCLOSURESAustralian made heavy duty powder coated steel construction or iP rated ABS versions
B
A
D
C
E
Enclosures
A ttBox-02 : Steel encloSurePowder coated 1.2mm steel - 340W x 290H x 105D mm
B ttBox-15 : Steel encloSurePowder coated 1.2mm steel - 340W x 430H x 145D mm
C ttBox-13 : Steel encloSurePowder coated 1.5mm steel - 482W x 470H x 185D mm
D ttBox-ABS : ABS encloSureIP65 Rated ABS (Not inc. PDM) - 186H x 146W x 75D mm
E ttBox-03 : Steel encloSurePowder coated 1.5mm steel - 460H x 300W x 150D mm
hiGh QuAlity electronic Security encloSureSManufactured in Australia on tactical premises, these heavy duty powder coated steel enclosures feature solid construction and optional tamper switch kits and/or keyed camlocks.
P25
TACTICAL
www.tac-tech.com.au - +61 2 8822-1888
G
Cyturion GSM
Tactical 3G products have been designed & tested for operation on the Telstra Next G™ Network
N645
F
H
AUSTRALIAN GSM Productsdesigned, Manufactured & Supported in Australia
®
F cyt-3G yAGi 10dBi : hiGh GAin directionAl10Dbi Gain Directional High Gain Antenna - Req Cable
cyt-3G yAGi 14.6dBi : hiGh GAin directionAl14.6Dbi Gain Directional High Gain Antenna - Req Cable
G cyt-cAnt-3G-10m-lmr400 : omni-directionAl10Dbi Gain Omni-Directional High Gain with 10m Cable
H cyt-Prot/dAtA-3G : cyturion Pro-dAtA 3G 3G/GSM Backup with onboard MDP. Inc ant & plugpack.
cyt-Prot-3G : cyturion Protector 3G 3G/GSM Backup (no data MDP). Inc ant & plugpack.
cyt-Prot/dAtA : cyturion Pro dAtA (2G)GSM Backup with onboard MDP. Inc ant & plugpack.
cyt-Prot : cyturion Protector (2G)GSM Backup (no data MDP). Inc ant & plugpack.
cyt-cAnt-3G-5m-lmr400 : omni-directionAl10Dbi Gain Omni-Directional High Gain with 5m Cable
cyturion GSm & 3G
Australian designed, manufactured & tested to meet the exacting standards of business, government and domestic users, tactical’s cyturion range of gSM & 3g products includes several models.
Cyturion Protector models feature alarm back-up with PStn interface, SMS control & monitoring, 8 optically isolated inputs, 8 optically isolated outputs and an onboard battery charger.
Cyturion Pro-Data models incorporate all the features offered by Protector models, with the addition of an onboard Modem data Pump (MdP) the integrated MdP allows remote upload and download of alarm panel programming data via a gSM cSd bearer - simply connect to the panel as you would using a standard copper PStn line. combined alarm reporting and data upload / download functionality are accomplished using a single SiM and single antenna - data transmission made simple !
Also available for remote area coverage are a selection of operation specific high gain antenna systems. these systems are configured for directional or omni-directional applications and are available for either gSM 2g or next g / 3g models
P26
TECHNOLOGIES
Superior Remote Area 3GAlarm & Data Coverage
www.tac-tech.com.au - +61 2 8822-1888
N645
®
Website : w w w.tac-tech.com.au
Available from your Tactical Distributor:
®
Tel: +61 2 8822-1888 Fax: +61 2 8822-1899