technical_datasheet_Baseoil_100NGroupIII.pdf
1
10, Bukit Batok Crescent | #04-04 The Spire | Singapore 658079. T +65 63372735 | F +65 63372734. E [email protected] | E [email protected] | W www.benzeneinternational.com Every care has been taken in the preparation of this information. To the extent permitted by applicable law, all warranties and/or representations, express or implied, as to the accuracy of the information are disclaimed, and no liability is accepted for the accuracy or completeness of the same.© 2003 Benzene International Pte Ltd .The Benzene International logotype (and any other trademarks) are trademarks of Benzene International Pte Ltd or one of its subsidiaries. TECHNICAL DATA SHEET Group III Base oil -100N Description This series products are very high VI base oils produced under all-hydro processing route (hydro cracking, wax hydro isomerization and hydro finishing). Wax hydro isomerization process and severe hydro cracking and hydro finishing process almost completely remove impurities and saturate aromatics to only a traceable level. This series base oil are also claimable as “synthetic” according to the ruling by the National Advertising Division (NAD) of the Council of Better Business Bureaus and have the following characteristics, which closely match conventional synthetics like PAOs. • Very high viscosity index • Excellent response to PPD • Excellent low temperature performance • Excellent oxidative and thermal stability • Very low volatility • Very high flash points and purity Technical Data TEST ITEMS TYPE ULTRA 4(100N) Appearance Visual B&C Specific Gravity, 15/4°C D1298 0.834 Color, Say bolt D156 +30 Kinetic Viscosity @40,cSt D445 19.62 @100,cSt 2.174 5.457 Viscosity Index D2270 123 Flash Point, °C (COC) D92 228 Pour Point, °C D97 -20.0 Carbon Residue(CCR), wt% D189 <0.01 Copper Corrosion, 100°C/3hr D130 1a Sulfur Content, wt ppm D5453 <1.0 TAN, mgKOH/g D974 <0.01 Ring wt% CA 0.2 Analysis, wt%CN D3238 17.7 wt%CP 82.1 Aniline Point, °C D611 115.8 UV Absorbance, 260-350nm D2269 <0.1 Noack, wt% D5800 14.5 Saturates, wt% D2007 >99 Packing Flexi Tanks
description
technical_datasheet_Baseoil_100N Group-III
Transcript of technical_datasheet_Baseoil_100NGroupIII.pdf
-
10, Bukit Batok Crescent | #04-04 The Spire | Singapore 658079. T +65 63372735 | F +65 63372734. E [email protected] | E [email protected] | W www.benzeneinternational.com Every care has been taken in the preparation of this information. To the extent permitted by applicable law, all warranties and/or representations, express or implied, as to the accuracy of the information are disclaimed, and no liability is accepted for the accuracy or completeness of the same. 2003 Benzene International Pte Ltd .The Benzene International logotype (and any other trademarks) are trademarks of Benzene International Pte Ltd or one of its subsidiaries.
TECHNICAL DATA SHEET Group III Base oil -100N Description This series products are very high VI base oils produced under all-hydro processing route (hydro cracking, wax hydro isomerization and hydro finishing). Wax hydro isomerization process and severe hydro cracking and hydro finishing process almost completely remove impurities and saturate aromatics to only a traceable level. This series base oil are also claimable as synthetic according to the ruling by the National Advertising Division (NAD) of the Council of Better Business Bureaus and have the following characteristics, which closely match conventional synthetics like PAOs.
Very high viscosity index Excellent response to PPD Excellent low temperature performance Excellent oxidative and thermal stability Very low volatility Very high flash points and purity
Technical Data
TEST ITEMS TYPE ULTRA 4(100N) Appearance Visual B&C Specific Gravity, 15/4C D1298 0.834 Color, Say bolt D156 +30 Kinetic Viscosity @40,cSt D445 19.62
@100,cSt 2.174 5.457 Viscosity Index D2270 123 Flash Point, C (COC) D92 228 Pour Point, C D97 -20.0 Carbon Residue(CCR), wt% D189
