1. TECHNICAL SPECIFICATIONS

Detail specifications for items shown on Exhibit 1, the Pricing Sheet:

SECTION A

ITEM 28024645: CABLE, SIAMESE CAT 5E +16/2STR, R/W, 1000'/RL BELDEN# 5288US

CAT 5E (200 MHz) 4 pair U/UTP Unshielded , Riser-CMR, Premise Horizontal Cable, 24 AWG Solid Bare Copper Conductors, Polyolefin Insulation, Ripcord, PVC Jacket (equivalent to Beldon Multi Conductor Category 5E Nonbonded- Pair Cable)

A. Insulation Material: PO PolyolefinB. Outer Shield Material: UnshieldedC. Outer Jacket Material: PVC- Polyvinyl ChlorideD. Outer Jacket Diameter: 0.19E. Applicable Specifications and Agency Compliance

a. NEC/ (UL) Specification CMRb. NEC Articles: 800c. CEC/C (UL) Specification CMRd. EU directive 2011/65/EU (ROHS II) Yese. Other Standards ISO/IEC ed. 2.1 (2008) Class Df. Telecommunication Standards Category 5E- TIA 568.C.2g. Other Specifications NEMA WC-63.1 Category 5E

ITEM 28024650: CABLE, 25PAIR CAT5E (2500'/RL), B#85-600-025GY/H#30093-50 ONLY

Acceptable brands: CAT 5E (100 MHz) 25- pair U/UTP Unshielded , Riser-CMR, Premise Backbone Cable,

24 AWG Solid Bare Copper Conductors, Polyolefin Insulation, Ripcord, PVC Jacket (equivalent to Beldon IBDN25R Multi Conductor Category 5E Nonbonded- Pair Cable)

Insulation Material: PO Polyolefin Outer Shield Material: Unshielded Outer Jacket Material: PVC- Polyvinyl Chloride Overall Nominal Diameter: 0.510 in Applicable Specifications and Agency Compliance

a. NEC/ (UL) Specification CMR

b. CEC/C (UL) Specification CMRc. EU directive 2011/65/EU (ROHS II) Yesd. Telecommunication Standards Category 5E- TIA 568.C.2e. Other Specifications NEMA WC-63.1 Category 5E

Hitachi SKU: 30093-50Description: Hitachi, Cat5e PowerSum Riser Cable; 25-Pair, 24 AWG Solid, Bare Copper, UTP

ITEM 28024700: WIRE, TRACE 19STR BARE CU, 2500’SPOOL, ANIXTER#6G-1401-02

APPROVED MANUFACTURERS | 6G-1401-02 | Cable, 14 AWG, 1 Conductor, THHN/THWN 19 STR bare copper 90C 600V color blackAnixter #:6G-1401-02

ITEM 28579610: CABINET, 72 PATCH PANEL, FRM-4RU--12X-TS, #10-4534

Enclosure, Rack Mount, with Slide out Tray, Multilink FRM-4RU-12X-TS (10-4534) , Holds 12 panels

General SpecificationsDimensions: 7.12” H x 17.0” W x 13.25” DCapacity: The unit can support patching, patching and splicing- Terminations: (12) Multilink Termination Panels,- Splices: Up to 96 single fused fiber splices using four 2000-SSTA splice traysMaterial: .060” AluminumCoatings: Electro statically applied powder coat, black

ITEM 28579635: BEAN BREAK SENSOR, DAKOTA ALERT #BBT-2500

The BBA-2500 is a solar powered wireless infrared break beam system that is simple to install and requires no wiring. The break beam sensors are powered by lithium ion batteries that are recharged through the solar panels during the day. Because the unit is self-powered there is no need to run wires for power. Installation time can be as little as a few minutes. The infrared sensing terminals can be mounted up to 300 feet apart and will send a signal back to the DCR-2500 receiver up to half mile away* anytime someone passes between the sensors.The break beam sensor is a point to point sensor and will not be activated by any motion outside of the monitored beam. The sensors are not affected by small objects such as falling leaves or birds. It can be mounted high enough to avoid dogs and other animals but it will detect any intruder walking through the beam area. The beam sensor is ideal for outdoor applications such as storage lots, lumber yards, car dealerships, etc. Multiple sensor pairs can be used to send a signal to one receiver if you wish to set up a perimeter.Operating Range: -30°F to 120°F

ITEM 28579645: ADHESIVE, RIBBON FORMING 4OZ, FAA-03, AFL #S008720

ITEM 28579650: SLEEVE, 40MM RIBBON (50/PKG), #PS-99-X40C, #680X640

ITEM 28595235: SPLICE CASE, X-LARGE FIBER, 3M, 3M 2178LL

3M™ Fiber Optic Splice Closure 2178-LL/FR3M ID  80611008865    UPC#  00051138708429    Part Number  2178-LL/FR   

3M™ Fiber Optic Splice Closure 2178-XL is designed to meet all common needs and field conditions. The unique strength of the member clamp assembly avoids cable sheath movement with temperature

changes. This flame-retardant closure is ideal for wall-mount, aerial strand-mount, pedestal, underground and pole-mount applications.3M™ Fiber Optic Splice Closure 2178-XL is made with a highly chemical-resistant material, enabling use use in buried, underground and aerial applications. This closure is easy to install, easy to use and easy to re-enter. It provides a separate area for routing, protecting and expressing buffer tubes and ribbon fibers. Multi-port grommets offer entry for drops or cables

Easy to install, easy to use and easy to re-enter

Designed for aerial strand-mount, buried, pedestal and underground applications

Measures 21.9 in x 8.5 in x 11.3 in

Includes tray support, gasket, air valve, bolts and cable strain relief, 6 sealing washer trees, 2 plugs, 4 cable ties, 1 sheath scuff, 3 hose clamps, 3 K-connectors and more

Maximum capacity of 288 single-fusion and 864 mass-fusion splices

Made of chemical-resistant material

Watertight seal

Comes with 3 cable entry kits and 2 ground lugs

Designed for inline and butt splicing configurations

ITEM 47525120: BRACKET KIT, AERIAL HANGER, 3M 2197

3M™ Aerial Hanger Bracket Kit 21973M ID  80610756100    UPC#  00054007922223    Part Number  2197   

3M™ Aerial Hanger Bracket Kit incorporates all necessary hardware for aerial installation of a 3M™ Fiber Optic Splice Closure 2178. The bracket is made of stainless-steel material for additional durability.3M™ Aerial Hanger Bracket Kit comes with an adjustable aerial hanger bracket that is ideal for use with 3M Fiber Optic Splice Closure 2178 Series. This bracket can also be used with closures that have 1- or 2-cable addition kits. The kit provides additional hardware to attach the splice closure cover to the bracket base and includes 6 corner inserts, 12 nuts, 2 flexible hinges, 2 "L" brackets, 2 bonding/hanger brackets and 2 bolts with washers.

Includes required hardware for aerial installation

Comes with tools to attach the splice closure cover to bracket base

Suitable for use with 3M™ Fiber Optic Splice Closures 2178-S, 2178-SL, 2178-LS and 2178-LL Series

Accommodates 2178 splice closures with 1 or two 2181 cable addition kits

Bracket has stainless-steel construction for additional durability

Includes 6 corner inserts, 12 nuts, 2 flexible hinges, 2 "L" brackets, 2 bonding/hanger brackets and 2 bolts with washers

1/pack

ITEM 47525125: SPLICE CASE L/S EXPANSION KIT, 3M 2181-LS

3M™ Cable Addition Kit 2181-LS/FR, Fire Retardant3M ID  80611012859    UPC#  00051138754143    Part Number  2181-LS/FR 

3M™ Cable Addition Kit is designed for the fire retardant 3M™ Fiber Optic Splice Closure 2178-LS. The kit includes 3 cable entry hardware kits, a gasket and materials for installing additional cables.

Compatible with 3M™ Fiber Optic Splice Closure 2178-LS/FR

Includes gasket and materials for installing additional cables

Flame retardant

1 kit/pack

SECTION B

ITEM 28579615: BULK HEAD, FIBER ST SINGLEMODE, MST-06-C-BLK, #99234K

ITEM 28579625: BULK HEAD FIBER LC-LC, #10-9709,MLCD-12-SM-C-BLK

ITEM 28579630: RIBBON FIBER PROTECTOR, #065-383-10

ITEM 28579640: FANOUT KIT FIBER LC TO RIBBON, GT-SM12RRN924LCUOED0-002

FIBER PIGTAILS- LCFEATURES-100% End-face geometric specification controlled -Customer special assemblies available- Telcordia GR-326-CORE Standard - Low insertion loss and back reflection loss -Good exchangeability -Good durability -High temperature stabilitySPECIFICATIONS

Single mode MultimodeInsertion Loss ≤0.50 dB max (PC)

≤0.50 dB max (UPC)≤0.50 dB max (APC)

≤0.20 dB (PC)

Return Loss ≥45 dB (PC)≥55 dB (UPC)≥65 dB (APC)

Interchangeability ≤0.20 dB (Connect Randomly)Tensile Strength 0-15kgVibration ≤0.20 dB (5-50Hz,1.55mm Amplitude)Operating Temperature -40 to +80 ℃

GEOMETRIC SPECIFICATION OF FINISHED END-FACEPC CONNECTOR APC CONNECTOR

Radius of Curvature 10-25 mm 5-15 mmApex Offset ≤50 um ≤100 umFiber Spherical Height -90 nm,+50 nmAngular Offset 8±0.5 ℃

ODERING OPTIONSEnd-face Finishing PC,UPC,APCFiber Mode SM9/125um: G652Dhttp://www.oemarket.com/product_info.php?

products_id=145 MM :62.5/125um or 50/125um

Cord Diameter 0.9mm,2.0mm,3.0mmCable Length CustomizedFiber count Duplex(2),4,6,8 & 12 fibers

ITEM 28579655: FANOUT KIT FIBER ST TO RIBBON, GT-SM12RRN924STUOED0-002

FIBER OPTIC PATCH CORDSM, 12 Fiber, Ribbon Riser Non-Armored, 900um 24" Legs(color coded), Flat Fan-Out Kit, ST-UPC to Blunt, No Pull Eye, 2 meter

ITEM 47525100: H-BRACKET, W/LARGE HOOKS, CESLIVE CPFI-HBRK-LH

CPFI-HBRKS-LH: Made out of T6061 High Quality Aluminum for Light Weight and yet very strong. Adjustable hooks for varying size of wire coils.