Technical SpecificaTionS and opTionS

RX-600e Half-Lane Cold Planer

The RX-600 cold planer offers power and high maneuverability. Suitable for highway as well as urban jobs. Cut depths up to 13” / 330mm and 86” / 2,184mm wide depending on cutter. Available with either three or four tracks. Front load-out conveyor with 60° swing to either side. Well-balanced and productive.

All specifications herein subject to change without notice.

engine

Cummins® QSX-15 Tier 4 Interim. One year engine warranty standard.Rated power 600 HP (447 kW)@1800 rpm. Maximum power 620 HP (460 kW) @ 1,850 rpm.Engine load controlOn demand cooling

elecTrical SySTem

CAN-based electronics with onboard and remote diagnosticsTwo 8D batteries. 105 Amp alternator24 Volt system with master disconnect switch.Emergency engine shut-downCutter disengages and engine shuts down when cutter doors are opened

conSTrucTion High-strength steel side sheets. Stability & balance without unnecessary weight.

propulSion Hydrostatic driveAutomatic traction controlHydraulically controlled suspension. Manual and automatic.

conTrolS

Two full-function operator stations (left & right side) on shock-absorbing operator platformJoy stick controls. Lighted instrument panel. Liquid-filled gauges.Foot/minute meter (or meters/minute)Auto-resume after stop

STeering modeS (4) modes: coordinated, crab, front only, rear only

ground conTrolS On each side for mold boards, emergency stop, horn, load-out conveyor, rear steering, end gates, elevation. Lockable vandal covers on main ground control boxes.

Turning radiuS 4-track: 6’8” (2.0m). 3-track: 5’8” (1.7m).

TrackSDirect hydraulic, planetary B3-HD track drives. Bolt-on, replaceable poly track pads.FOuR TRACk: (4) 12” (305 mm) wide grousers.THREE TRACk: (2) 12” (305 mm) wide grousers on front & (1) 14” (356 mm) wide one on back.

SpeedS - four TrackTravel 0-3.2 mph (0-5 kph) High working 0-163 fpm (50 mpm) Low working 0-110 fpm (34 mpm)

SpeedS - Three-TrackTravel 0-3.2 mph (0-5 kph) High working 0-127 fpm (39 mpm)Low working 0-100 fpm (30 mpm)

conveyorS

32” (813 mm) wide endless, heavy-duty belts with 1” (25 mm) tall molded rubber cleatsCanvas load-out conveyor coversSelf-cleaning head and tail pulleys120° load-out conveyor swing capability. Trucks can operate in adjacent lanes if needed.Truck guards on load-out conveyor. Safety guards on primary conveyor.Easy-open belt guard latches

STandard lighT & elecTrical ouTleT package

(10) 24 V lights. (2) magnetic base 24 V DC halogen work lights (6) 24 V DC power outlets.

fuel Tank 250 gal (946L) hydraulic fluid Tank 90 gal (341L)

WaTer Tank 800 gal (3028 L). (3) fill stations.

WaTer SySTem Spray bars on conveyors and at front and rear of cutter housing.Variable speed, hydraulically-driven water pump with automatic on/off.

WaShdoWn High pressure with 46’ (14 m) retractable hose reel.air compreSSor Includes air tools.lubricaTion SySTem Grease fittings arranged in zones.Warning SySTem Amber warning beacon. Back-up alarm. Track turn alarm. Back-up camera. Toolbox On-board, lockable tool storage.auTomaTic poWer pack Raises and lowers engine hood, front and rear mold boards. Controls belt tension release.operaTor Sun Shade Includes mounting hardware.

Technical SpecificaTionS rx-600e opTionS

rx-600e available grade and Slope conTrolSmechanical Dual hydraulic grade controls. Electric jacks & electric over hydraulic slope control.

digiTal SmooThmillTm grade & Slope auTomaTion

Automates elevation of front legs through grade & slope sensors for both sides of machine. (2) dual control panels can be connected at ground level at the middle or rear to control both sides. (2) single control panels for operators platform, one for each side. (2) wire rope sensors. (2) single eye sonic sensors. Plugs for controls and sensors, mounting hardware, cables and junction boxes. uses MOBA brand sensors and controllers.

digiTal preWiring for SmooThmill averaging Ski

Junction boxes and cables to corners of machine for averaging ski. Does not include sensors or mounting hardware.

digiTal SmooThmill Single Ski for grade averaging on one Side of machine

Junction box & sensor connections on both sides. Sensors & arms can swap to either side. (2) Sonic sensors with 5 transducers each for front & rear corner of machine. (2) Junction boxes, cables & mounting hardware. Requires SmoothMill grade & slope automation.

digiTal SmooThmill dual Ski for grade averaging on boTh SideS

Hardware upgrade from single to dual averaging ski. (2) sonic sensors with 5 transducers each for front & rear corner of machine. (2) junction boxes, cables & mounting hardware. Requires SmoothMill grade & slope automation and single averaging ski package.

digiTal Topcon® baSe SySTem Dual control boxes, dual wire rope sensor, dual sonic sensors, slope sensor, cross over cables, brackets, carrying case, cables and hardware.

digiTal Topcon Sonic averaging Ski

upgrade to Topcon Base System. (2) additional trackers, cables, and hardware to use frame of machine as ski. (For dual ski order 2 packages.)

digiTal Topcon rear SySTem (1) Sonar grade control for rear elevation.

moba® rear SySTem (1) Sonar grade control for rear leg elevation and control box.

rx-600e cuTTer SySTem feaTureSmaximum cuT depTh 13” (330 mm)available cuT WidThS 6’3” (190 cm), 6’7” (200 cm), 7’2” (218 cm) plus VCSTM options (see below).STandard TooTh Spacing 5/8” (16 mm)STandard Tip diameTer 44” (1118 mm)

STandard drum SySTem Triple wrap, single hit with Quick Change tooth holders for fast field replacement. Sollami® standard. kennametal®, Sandvik®, keystone optional®.

cuTTer drive Bolt-on with mechanical v-belt drive. Automatic drive belt tensioning.gear box W-40 Fairfield cutter gear box with “break-away” input shaft.

cuTTer houSing conSTrucTion 10° angled front and rear mold boards for efficient material evacuation. Powered wrap-around endgates with replaceable wear shoes. Wear liners in all high wear areas.

Spray barS Front & rear water spray bars with flow and pressure control.

STandard ch600-75 (3-Track modelS only) 6’3” (75”) (190cm) width cutter drum. 144 cutter bits for traditional milling.

STandard ch600-79 6’7” (79”) (2.0 m) width cutter drum. 150 cutter bits for traditional milling.STandard ch600-86 7’2” (86”) (2.18 m) width cutter drum. 162 cutter bits for traditional milling.

opTional drumS for above Profiling drums 3/8” (9.5 mm)Weld-on micromill drums 0.2” (5 mm)

opTional vcSTm variable cuTTer SySTem

Special cutter housing with segmented, hydraulically adjustable rear mold board.Change cut width by only changing drum.

vcS maximum cuT depTh 12” (305 mm)vcS rear mold board opTionS Segmented at either 24” (610 mm), 36” (915 mm) or 48” (1220 mm)

available vcS drumS 24” (610 mm), 36” (914 mm), 48” (1.22 m) Sollami Quick Change drums with 5/8” (16 mm) bit spacing standard. kennametal optional.

rx-600e available cuTTer drumS and houSingS

auxiliary poWer Generator Sets: 4.0 or 7.5 kW.opTional lighTS (4) High-intensity discharge (HID) lights for higher levels of light.folding conveyor Hydraulically-folding truck loading conveyor shortens transport length.lincoln lube Automated lubrication system.

rear ToW hiTch package Welded to frame. used to tow machine or connect to tanker for water or emulsion. Includes pintle hitch. Not needed with CIR additive system.

bi-direcTional package All steering & travel controls. Cutter housing scraper blade & down pressure valve on front mold board. Sealed endgates at front of cutter housing. Endgates slide up in reverse direction.

folding canopy Hydraulically erecting operator platform canopy.operaTor SeaT (2) optional seatsaddiTional Sun Shade Includes mounting hardware.

RX-600e Cold Planer RX-600e Cold Planer

RX

-600e

RX

-600e

machine dimenSionS rx-600e

8'-2"(2479)1'-2"(348)

6'-7"(2007)drum

width

shown

4'-7"(140)

7"(170)TYP 9'-10"(3009)

2'-8"(805)

4'-5"(136)

2'-10"(862)7'-2"(2188)

8'-4"(2540)2'-10"(860) 3'-11"(1185)

15'-6"(4728)

47'-5"(14452)

27'-8"(8439)

16'-11"(5157)m

ax.

60° SWING

60° SWING

6'-9"(2067)

5'-5"(1661)

2'-8"(813) All specifications are subject to change without notice.

SelecTed approximaTe

Shipping WeighTS

(1/4 Tank of fuel)

WiTh ch600-79

lbS / kgW

iTh ch500-86lbS / kg

rx-600 3-track56,890 / 25,805

59,050 / 26,780rx-600 4-track

59,220 / 26,86061,390 / 27,850

© Roadtec 2012 Adams

Dimensions in brackets are m

m.