Technical specification

TORSUS TERRASTORM AMBULANCE 4x4

based on Volkswagen Crafter 35 4Motion

TORSUS TERRASTORM AMBULANCE – best European ambulance bus designed for the

emergency, safe transportation and rescue of people life in the off-road conditions.

Specification Wheelbase: L3 3640 mm

Body height (passenger compartment): H3 1861 mm

Engine: 2,0l biTDI 130 kW/177 h.p.

Transmission: 6-MT, 4x4

(automatic 8-speed, 4х4 -optional)

Vehicle dimensions (L3H3 base):

Base equipment:

Body:

• High roof Н3, body color

• Body trimming according to regulations color scheme and TORSUS design solution

• Special protective underbody covering (below the tornado line)

• Protective arc footboards along the left and right sides

• Heat-insulating windshield made of laminated glass

• Reinforced front bumper, increased approach angles

• Two-leaves rear doors with the possibility to open inside

• Sliding right doors in the medical compartment with middle fixation

• Left exterior mirror, convex, with integrated LED turn signal and wide viewing angle

• Right exterior mirror, convex, with integrated LED turn signal and wide viewing angle

• Exterior mirrors, electronically adjustable and heated

• Cabin doors, reinforced driver's door hinges

Protective body elements

• Reinforced metal protection for the engine, transmission and rear differential

• Side steps on the left and right sideboards

Transmission, drive:

• All-wheel drive, 4х4

• Gearbox: 6-speed

• Mechanical differential lock of rear axle

Suspension and wheels:

• HEAVY DUTY SUSPENSION WITH OFF ROAD RIMS AND MUD TIRES

• Front suspension type: McPherson

• Rear suspension type: leaf spring

• Off-road kinematics of front and rear suspension optimized for off-road conditions

• Reinforced front and rear shock absorbers with extended axle stroke and with optional auxiliary

reservoir for extreme operating conditions

• OFF-Road leaf springs

• Front adapters for springs/Rear shock absorbers

• Front axle (load capacity up to 1800 kg)

• Reinforced stabilizers

• Reinforced wheel rims R16 (black, max load capacity 1200 kg)

• OFF-Road lug tires

Steering wheel:

• Steering wheel arrangement for right-hand traffic

• Electric power steering

• Adjustable in height and angle

Brake system:

• Electric stability control (ESC)

• Anti-lock braking system (ABS)

• Crosswind Assist

• Hill Start Assist

• Front axle brakes: 16 inches, disc

• Rear axle brakes: disc

• Emergency Brake Assistant

Cabin interior:

• Rubber flooring in the cab

• Interior soundproofing insulation, premium

• Upholstery, fabric «Austin»

• Driver's seat

• Double front passenger seat with storage compartment

• Storage Package: Upper storage compartment with one standard 1-DIN shafts and reading lamp

• Sun visors

• Partition between driver cabin and medical compartment

• Cab door, reinforced driver's door hinges Functional equipment:

• Radio preparation with speakers in front

• Central locking with remote control and inside opening, without SAFELOCK function

• Power windows of front doors

• Immobilizer

• Multifunctional display «Plus»

• Operating voltage 12 V

• Generator 180 A

• Main battery 420 A (70 Ah)

• Additional battery with cut-off relay for medical equipment 520 A (90Ah)

• 2 remote control folding keys

• Glove compartment

• Terminal module for switching medical equipment

Safety

• 3-point seatbelts with adjustable seat belt height and electric pretensioners in the front of the cab

• Driver seat belt warning sound indicator

• Driver’s safety airbag Lighting system:

• Halogen twin headlamps

• Daytime running lights Air-Conditioning and Heating System

• Air conditioning system Climatic with 2nd evaporator: cooling of the cabin and medical

compartment (- Refrigerant R134a)

• Additional water heater with 2nd heat exchanger: heating of cabin and medical compartment

Images of medical compartment execution: Specification of medical compartment. Type “B” 1. Medical compartment (area) 1.1 Noise isolation of the medical compartment 1.2 Thermal insulation of the medical compartment 1.3 Vibration isolation of the medical compartment to prevent extraneous vibrations

1.4 Reinforcement of walls and ceilings 1.5 Installation of supporting elements for coating panels 1.6 Installation of supporting for medical devices 1.7 Installation of supporting for medical devices with the possibility of quick removal 2. The floor of the medical compartment 2.1 Floor covering with waterproof laminated plywood 2.2 Floor covering is waterproof, antistatic, antiskid, steady against influence of disinfectants 2.3 Sealing of joints at the bottom of the side panels 3. The ceiling of the medical compartment 3.1 Ceiling panel with built-in Led lamps 3.2 Handrails ceiling 3.3 Dropper holder on the ceiling panel 5. Glazing of the medical compartment 5.1 Glazing of the rear door 5.2 Glazing of the side doors of the cabin with a sliding window 5.3 Wrapping the windows with film to ensure the patient's privacy 6. Handrails, stairs 6.1 Handrails in the aperture of sliding doors 6.2 Handrail at the aperture of rear door 6.3 Rear door footrest 7. Heating and ventilation 7.1 Multi-position ceiling hatch for ventilation and evacuation 7.2 Ceiling fan in/out 8. Electrical equipment 8.1 LED lamps for medical compartment lighting 8.2 Lamps under the surface of the load 8.3 Lamps for lighting the adjacent area of sliding doors 8.4 Lamps for lighting the adjacent rear door area 8.5 Battery charger 8.6 Electrical socket -12V (4 pcs) 8.7 Electrical socket ~ 220V (4 pcs) 8.8 Voltage converter -12V / ~ 220V 700 W. 8.9 Power supply ~ 220V / -12V 8.10 Power supply of external network ~ 220V with protected plug connector 8.11 External power supply cable ~ 220V 8.12 The blocking of engine while an external power supply is connected 8.13 Lamp to illuminate the surroundings 8.14 Medical compartment control panel, air conditioning and heating system and lighting system, medical compartment temperature control 9. Gas supply system 9.1 Gas pipeline under the interior trim 9.2 2 oxygen balloons with a capacity of 10 liters. with mounting bracket and gearboxes 9.3 2 sockets of oxygen with fast connection 9.4 Flowmeter 9.5 Humidifier for oxygen saturation coming from the gas system

10. Seats, seats of the medical compartment 10.1 Rotation seat at the head of the stretcher with seat belt. 10.2 Rotation seat on the side of the load with a seat belt and with fixation in two positions 11. Medical furniture 11.1 Walls along the left and right sides of fiberglass with lowered burning rate (100 mm / min) 11.2 Cell for cylinders with mounting in the rear of the cabin 11.3 Cells for storage of bags - tabs 11.4 Shelves with a skirting board that prevent the contents from falling out when moving 11.5 Box with a lock for medicines 12. Siren, lights and signals 12.1 Siren, rotating beacons, blue, LED signal 12.2 External loudspeaker system 13. Auxiliary equipment 13.1 Internal communication system 13.2 Fire extinguisher in the driver's cab 13.3 Fire extinguisher in the medical salon

Medical equipment, Typ.B

№ Name Qty. Image

1 Stretcher’s platform 1

2 Stretcher

1

3 Device for transferring a sitting patient

1

4 Vacuum Mattress

1

5 Transfer sheet

1

6 Spinal board with Head Immobilizer

1

7 Devices for immobilization (set for fractures)

1

8 Cervical Collar Adjustable

2

9 Electrical suction unit

1

10 Hand-held Suction unit

1

11 Defibrillator

1

12 Syringe pump

1

13 Electrocardiograph

1

Warranty and service Warranty:

• 24 months of international warranty without mileage limitation.

Service:

• Any authorized TORSUS, VW or MAN Dealer

Technical parameters:

Engine:

• Capacity: 177 h.p./130 kW at 3600 rpm

• Type: diesel bi-turbo, Common rail

• Torque: 410 Nm at 1500-2000 rpm

• Emission level – EU6 CI

• Fuel consumption o Combined: 9.0 л /100 km o city: 9.9 л/100 km o highway: 8.5 л/100 km

• CO2-emissions, combined: 236 g/km

Dimensions:

• Wheelbase: 3640 mm

• Body length: 6000 mm

• Body width: 2065 mm

• Height: 2880 mm

• Approach angle: 26 degrees

• Departure angle: 20 degrees

• Clearance: 290 mm

• Folding depth standard/increased: 690 mm/820 mm

Fuel tank

• Fuel tank volume: 75L

• AdBLue fuel tank volume: around 18L

Weight:

• Max. permissible weight: 3500 kg

• Front axle load: 1800 kg

• Rear axle load: 2100 kg

• Permissible gross train weight: 6.000 kg

• Permissible trailer braking load: 12% 3.000 kg

• Permissible trailer load without brakes: 750 kg

• Permissible roof load: 150 kg

• Permissible load on a coupling device: 120 kg

Global Headquarters

Biskupský dvůr 2095/8, Nové Město, 110 00 Prague 1, Czech Republic

T: +420 226 002 328 | E: marketing@torsus.eu | www.torsus.eu