TECHNICAL SPECIFICATION SONALIKA 14 TONAuthorised Dealer 1 0 / 1 0, R a i n b o w, 0 1 8 1-5 0 8 2 8...
Transcript of TECHNICAL SPECIFICATION SONALIKA 14 TONAuthorised Dealer 1 0 / 1 0, R a i n b o w, 0 1 8 1-5 0 8 2 8...
Authorised Dealer
10/1
0, R
ainb
ow, 0
181-
5082
881
BORN TO LEAD
INTERNATIONAL TRACTORS LIMITEDWORKS: Village Chak Gujran, P.O. Piplanwala-146 022, Jalandhar Road, Hoshiarpur, PUNJAB
Phone : 098147-51082,97819-25913, 302807, Fax : +91 - 1882-302636e-mail: [email protected], www.sonalika.com
CONSTRUCTION EQUIPMENT DIVISION
SONALIKA 14 TON
Two double acting extension cylinder with hard chrome shafts.
Fuel tank : 54 Ltrs.Hydraulic tank : 120 Ltrs.Engine : 12.5 Ltrs.Transmission : 54 Ltrs.
Over load warning systemOver hoist warning systemSafety brakes for hoistHose failure protection deviceCylinder guard for protection
Boom Extension Cylinder
Refill Capacities
Safety
Front Rear
11.00 x 20 - 16 PR (04 Nos.)13.00 x 24 - 12 PR (02 Nos.)
TYRES
AXLESFront Rear
Heavy duty fabricated box sectionHeavy duty drive axle
Fly jibFire extinguisherSpare wheel & tyreSpark arrestorHydro static steeringFront & rear work lights
OPTIONAL ACCESSORIES
ELECTRICAL SYSTEM (Negative Earth)
12 Volt systemOne No. heavy duty batteryAlternator with 35Amp.
TELESCOPIC BOOM 3 part boom is of fabricated box section.Extensions are hydraulically operated.
STANDARD ACCESSORIES
Rear view mirrorReflectorsFront tyre protectorSide view mirrorAll weather cabinLift cylinder guardsStop, Tail & Turn indicatorWork lampWater temperature gaugeEngine oil pressure gaugeAmpere meter gaugeRPM/hour recorder gaugeTool kitJack & handle
*ITL reserves the right to alter the specification without notice.*Dimensions, Weights and Capacities mentioned here are approximate.
TECHNICAL SPECIFICATION
LIFTING CAPACITY(Free on wheels) 14 Ton
ITL / 4100 FL - 60 HP4 cylinder, in lineDirect injectionOn line FIP pump Rated engine RPM - 2200/ 44.2kwMax torque (Nm) - 230@1200 RPMDisplacement - 3700 CCBore X Stroke - 100mm X 118mm
ENGINE SPECIAL FEATURESHeavy duty engineFuel efficientLow noise / Low vibrationEnvironmental friendly Lowest emission - Bharat Stage-II
MODEL
SPECIAL FEATURESHeavy duty, constant mesh.Smoother gear change.Low wear & tear.Ideally build 8 forward and 2 reverse Speeds with high & low range selector.Low noise.Low power losses.
28 kmph. max. on even metelled road (without load)Especially designed for crane application, Single plate, Heavy duty, Dry friction type.
TRANSMISSION(Rugged, Versatile &Heavy Duty)
TYPEHydraulically operated, with two double acting hydraulic cylinders.
ARTICULATION0 56 on each side.
TURNING CIRCLE RADIUS 7mts. (approx) on outer rear wheels
STEERING
TRAVEL SPEEDCLUTCH
Driven directly from engine crank pulley.
4 spool with integral relief valve set at 2150 kg/cm
Hydraulic circuit is fitted with high quality hydraulic filter to protect equipment against oil contamination. Suction line fitted with 100 mesh size filter while 25 micron, full flow filter is fitted in the return line.Two double acting lift cylinders with hard chrome shafts.
Two double acting steering cylinders with hard chrome shafts.
HYDRAULIC SYSTEM Main Pump
Control Valve
Hydraulic filter
Boom lift cylinder
Steering cylinder
Operating Weight 13000 kg