Technical Service
5
Power Component Feedback CFS Q/4 Order 2015
-
Upload
tapash-kumar-roy -
Category
Engineering
-
view
35 -
download
0
Transcript of Technical Service
![Page 1: Technical Service](https://reader036.fdocuments.in/reader036/viewer/2022062502/58a916701a28ab6d2d8b6251/html5/thumbnails/1.jpg)
Power Component Feedback
CFS Q/4 Order 2015
![Page 2: Technical Service](https://reader036.fdocuments.in/reader036/viewer/2022062502/58a916701a28ab6d2d8b6251/html5/thumbnails/2.jpg)
For art:808-9/2070
Excess lasting allowances waist area, reduce 2-3 mm (after check again by you). Wrinkle found at seat area, need to
correct it.
![Page 3: Technical Service](https://reader036.fdocuments.in/reader036/viewer/2022062502/58a916701a28ab6d2d8b6251/html5/thumbnails/3.jpg)
For art:808-2/6010
Stitch feather edge maximum1.5-2 mm allowance(Open edge will resist the sole attachment.
![Page 4: Technical Service](https://reader036.fdocuments.in/reader036/viewer/2022062502/58a916701a28ab6d2d8b6251/html5/thumbnails/4.jpg)
For art:808-6841
Wrinkle found at vamp area, please take corrective
action.
![Page 5: Technical Service](https://reader036.fdocuments.in/reader036/viewer/2022062502/58a916701a28ab6d2d8b6251/html5/thumbnails/5.jpg)
Thank You