Technical Report: (8514)148-0932 - Regent Products Corp. · CONSUMER PRODUCTS SERVICES DIVISION...
Transcript of Technical Report: (8514)148-0932 - Regent Products Corp. · CONSUMER PRODUCTS SERVICES DIVISION...
CONSUMER PRODUCTS SERVICES DIVISION liEfliTAS
Technical Report: Date Received:
RESULT: PASS (US & CN)
(8514)148-0932 May 28, 2014
June 10, 2014 PAGE 1 OF 19
Sample Description: GIRLS DRESSUP WESTERN HAT AST 1.) PINK
Vendor: Manufacturer:
Buyer:
Labeled Age Grade: Appropriate Age Grade: Tested Age Grade: Client Specified Age Grade: Ref#:
Country of Origin: Assortment No.: Sample Information: Countries of Sale:
Sample Description:
TEST:
2.) RED 3.) PURPLE PARTS MONDAY BEAUlY LTD RUYI HOLDING GROUP CO., LTD. NIA
NOT PRESENT OVER 3 YEARS OF AGE OVER 3 YEARS OF AGE NOT SPECIFIED
NIA
CHINA NIA NIA US/CANADA
• BBP I DBP I DEHP content [CPSIAJ • Cellulose nitrate [SOR/2011-171 • Country of origin [Canadian customs tariff] • Heavy metals content in surface coatings
[Canada Toys Regulations (SOR/2011-17) section 23]
• Mechanical hazards- toys [ASTM F963-11J
• Soluble heavy metal contents in substrate [ASTM F963-11 I
Sample Size: Style No(s):
Sampling:
36+1 LOT(S) N/A
y
Canada toy regulation [SOR/2011-171 • DNOP I DINP I DIDP content (CPSIAJ • Labeling review- toys [ASTM F963-11 J • Phthalates content in toys, child care articles
and watches (CA Prop 651
• Total cadmium content in substrate materials (CPSC-CH-E1002-0B modified I CPSC-CHE1001-0B modified!
• Total heavy metal contents in substrate [ASTM F963-11)
Bureau Verltas Shenzhen Co,, Ltd 4/F, Block B, Minllda Industrial BuUding, 4\h Zone of Honghuallng lnduslrlal Park, Xill Town, Nanshan District, Shenzhen, Guangdong, P.R.C.
Thlu~pOil b g<Nomed by, ood IOC<IIpOIM .. by rdaren~. tho Co~<iliono o!T elti!IO u po•tod at Ill a date of! .. uo""" of lhJuepOil at hUp:/lwHW,blltenuvert\~o.wm/<j>11nd I• iltonded for you• extltl>IYe ijle. Any ~•p)ing o• replfeahn of !hl.o lejl<l!i:to Cf for ""''other
Tel: 86-755-86185200 Fax: 86-755-86185206 www.bureauverltas.com/cps
~~f.~~~~·;!r~~ ~~·~:~:: :.:~: ~~:~~rt;;~~.r:.·~~~~~:t ~! ~~~~"J.~.::~::~:~~~dl!::'~;.~:!t~!lv":'~~~~"gs qt!JU!y or <hantl..U~~ oU>e lot &"om v.hich a te.t sample \'ia1 taken or any st<rilar Cf ldwtlcal prod •. u:t uolu• •pecifiedy tnd Upu~1ly
~~·~~v~0~~~~~ ~:dd•a~~~~~~~u~~~~~~~:;::rQ~~u';;~~o~ ~~~~:.~::i"~~:~~~ ~·.~~~ !~~':'da~"o:,~"~!J~~~~d0e~. howover, that •u<h notiee 1haU bo In l'd'iting 01\d oholl•peclficoll)l•ddrns the Issue y<>U \<Ish to rol•e. A fdUfe to r.ohe ...U. luu~ l'o!lllin tho prtltnl!od time sh•U con•lilute you uoquolified •~eeptanco of th~ complettnu• ofthlo 1eport, lha lo•l• C«lducted and th~ eon1<1ntu of the! ori<:011!1~l•.
E!UREAU VERITAS
• Total cadmium content in surface coatings [CPSC-CH-E1003-09.1 modified]
• Total lead content in substrate materials [CPSIA]
• Total lead content in toys and child care articles [CA Prop 65]
• Flammability of solids [16 CFR 1500.44]
• Parts labeling [CPSD-Hl-01057-MTHD]
• Heavy metals content in packaging materialsdocument review [TPCH]
• Clienfs llmt is 90ppm fornTotallead content in substrate materials [CPS lA]" GRBI Washington 66 CHCC-Doc
The sample(s) MEET the following requirement(s):
Technical Report: (8514)148-0932 June 10, 2014
• Total lead content in surface coatings (CPSIA]
• Tracking label for children's product [CPSIA]
• Illinois lead waming label [Illinois]
• Uniform packaging and labeling regulations [Nisi handbook 130 2009 part IV A] Consumer packing and labeling act and regulations [Consumer packaging and labeling regulations]
., Illinois lead content in surface coatings [Illinois]
• Client's Bisphenol A content
The BBP, DBP and DEHP requirement(s) of the United States Consumer Product Safety Improvement Act (CPSIA) of 2008, Section 108(a).
The mechanical hazards requirements of the tested sections of Canada Consumer Product Safety Act. Toys Regulations, SOR/2011-17 and Schedule 2.
The cellulose nitrate requirements of Canada Toys Regulations, SOR/2011-17, section 21.
The country of origin marking of the Canadian "Marking of Imported Goods Order, C.R.C., c.535".
The DNOP, DINP and DIDP requirement(s) of the United States Consumer Product Safety Improvement Act (CPSIA) of2008, Section 108(b)(1).
The labeling requirements of ASTM F963-11, "Standard consumer safety specification for toy safety".
The mechanical hazards requirements of ASTM F963-11, "Standard consumer safety specification for toy safety".
The BBP, DBP, DEHP, DnHP and DIDP content requirements in toys, child care articles and watches according to the California Proposition 65 settlements of County of Sacramento case number 07AS046B3, and the Alameda Superior Court case numbers BG07350969, RG08367601, RG07351032 and RG08378050.
The tracking label requirement of the Consumer Product Safety Improvement Act (CPSIA) of 2008 section 103 Tracking Labels for Children's Products.
The flammability requirements of 16 CFR 1500.3(c)(6)(vi), "Flammable solid" (FHSA regulations).
The packaging and labeling requirements of the Uniform Packaging and Labeling Regulation.
The parts labeling requirements of clienfs specification.
The consumer packing and labeling requirements of Consumer packing and labeling act and regulations.
Illinois lead warning label [Illinois].
BUREA:U VERJIA:S
The style#1-3 sample(s) MEET the following requirement(s):
Technical Report: (8514)148-0932 June 10, 2014
The soluble heavy metals content in substrate requirements of ASTM F963-11, "Standard Consumer Safety Specification for Toy Safety," Section 4.3.5.2(2)(b).
The total lead content requirements in toys and child care articles according to the California Proposition 65 settlements of Alameda Superior Court, BG07350969, RG08378050 and San Francisco Superior Court 07-462991.
The total lead content In substrate requirement(s) (100 milligrams per kilogram) of the United States Consumer Product Safety Improvement Act (CPSIA) of 2008, Section 101 (a)(2).
In lieu of testing and at the request of the client, documentation has been provided which indicates compliance with the heavy metals content in packaging requirements of Model Taxies legislation of the Taxies in Packaging Clearinghouse, TPCH (formerly the Coalition of Northeastern Governors, CONEG).
The bisphenol A (BPA) content requirement of the client's specification.
The totalleiad content of substrate materials requirements in client's specification (90ppm).
The total cadmium content of substrate materials requirements in client's specification (40ppm).
The sample(s) & parts MEET the following requirement(s):
The total lead content of 90ppm requirements of 16 CFR 1303, ~san of leadwcontaining paint and certain consumer products bearing lead-containing paine as mandated by Congress in section 101 (f) of the Consumer Products Safety Improvement Act (CPSIA) of 2008, Public Law 110-314.
The total lead content of surface coating requirements of Illinois Lead Poisoning Prevention Act, Public Act 095-1019, In client's specification (40ppm).
The total cadmium content of surface coating requirements in client's specification (40ppm).
The applicable heavy metals content requirements for surface coatings of the Canada Consumer Product Safety Act, Toys Regulations, SOR/2011-17 Sec. 23.
The style#1-3 sample(s) was tested to the following requirement(s) and the data provided is for informational purposes only:
The initial total heavy metals content analysis for soluble heavy metals content in substrate requirements of ASTM F963-11, "Standard Consumer Safety Specification for Toy Safety," Section 4.3.5.2(2)(b).
The result of the following requirement(s) is considered as MARGINAL under the following requirement(s}:
In lieu of testing and at the request of the client, documentation has been provided which rated as MARGINAL for the chemical content requirement of the client's specification with reference to the Chemicals of high concern to children (CHCC) content as contaminant-Washington revised code (RCW), Chapter 70.240 Children's Safe Product Act (CPSA).
BUREAU VERITAS
Technical Report: (8514)148-0932 June 10, 2014
Note: The sample(s) was not evaluated to the Normal Use testing requirements specified in ASTM F963M11, Section 8.5. It is the responsibility of the manufacturer, vendor or distributor to conduct tests that will simulate normal use conditions. These tests shall ensure that hazards are not generated through normal wear and deterioration of the sample(s). These tests shall also simulate the normal play mode of the toy and to simulate the expected mode of use of the particular toy. The tests shall be conducted in an expected use environment. These normal use tests shall simulate the intended use of the toy based on its estimated lifetime.
Note: The received sample(s) contained surface coating(s) which are bonded to the substrate materials during the manufacturing process and cannot be scraped off for testing, therefore such coating material(s) was not subject to the heavy metals analysis of surface coating in ASTM F963-11, "Standard consumer safety specification on toy safety", section 4.3.5. 1 (2).
Note; Insufficient surface coatings were found on the submitted samples. Therefore, the heavy metals tests were conducted on the submitted parts.
WC/ag/mc
cc: CARMEN , MONDAY BEAUTY LTD DEREK , MONDAY BEAUTY L TO EAGLE., MONDAY BEAUTY LTD TERRY., MONDAY BEAUTY LTD SUNNY YU2, MONDAY BEAUTY L TO
BUREAU VERITAS SHENZHEN CO.,L TD
WendyCha Manager Toys And Juvenile Products Department
BUREA!Iv \/ERIT\1\S
TEST RESULT
BISPHENOL A {BPA) CONTENT {Client's specification)
Analyte
Maximum allowable limit:
Analyte
Test Component Color/Component I Location I
A. I Black printed foam/flocking I Hat I
mg/kg = milligrams per kilogram
Technical Report: (8514)148·0932 June 10. 2014
Blsphenol A
30 mg/kg
Blspheno!A
Result Conclusion Style No. (mg/kg)
1-3 0.358 Pass
HEAVY METALS CONTENT IN SURFACE COATING (Canada Consumer Product Safety Act· Toys Regulations, SOR/2011-17 Sec. 23)
Sample Color Identity
A Black coating Words on hat Parts
Analyte As Ba Cd Hg
Maximum I(T) - - - ND Limit (mg/kg) 1 (S) 1000 1000 1000 -
Anal te As I Ba I Cd I Hg I Method Result (mg/kg)
A (D LT 10 110 LT 10 ND
(S) - - - -mg!kg = milligrams per kUogram (ppm=parts per million) *= Average of duplicate analysis ND = Not detectable (T) = Total Analysis (S) = Soluble analysis
Pb
90
-
Pb
28
-
Location Style
1-3
Sb Se
- -1000 1000
I Sb I Se Conclusion
17 LT 10 PASS
- -
L T = Less Than As = Arsenic, Ba :: Barium, Cd = Cadmium, Hg = Mercury, Pb = Lead, Sb = Antimony, Se = Selenium
BUREAU VERITJ:\S
TEST RESULT
Technical Report: (8514)148·0932 June 10, 2014
TOTAL LEAD CONTENT IN SURFACE COATING (Illinois General Assembly, Public Act 095·1019)
Test Method: Acid digestion followed by Atomic Absorption Spectrophotometry or Inductively Coupled Plasma Spectrometry
lead 40 mglkg
Analyte Lead (Pb Sarr)ple Description Result Conclusion
Color I Component Location Style (mglkg) (A) I Black coating Words on hat 1-3 28 PASS
Parts
L T =Less Than mglkg =milligrams per kilogram (ppm=parfs per million) • =Average of duplicate analysis
TOTAL LEAD CONTENT IN SUBSTRATE (100PPM) (Consumer Product Safety Improvement Act (CPSIA) of 2008)
Test Method: U.S. CPSC-CH-61001-08.1 (June 21, 2010) or U.S. CPSC-CH-E1002-08.1 (June 21, 2010).
lead 100 mglkg
Analyte Lead (Pb) Samole Descriotion Result Conclusion
Color I Comoonent Location Stvle (rllglkg) A Pink flocked pink foam Hal 1 LT 10 PASS B Red flocked red foam Hat 2 LT 10 PASS c Pueole flocked ourole foam Hat 3 LT 10 PASS
L T = Less Than mglkg = mHiigrams per kilogram (ppm=parts per million) .. =Average of duplicate analyses
"BUREAU VERITAS
Technical Report: (8514)148-0932 June 10, 2014
TEST RESULT
TOTAL HEAVY METALS CONTENT -INITIAL ANALYSIS FOR SOLUBLE HEAVY METALS CONTENT IN SUBSTRATE (ASTM F963-11, Section 4.3.5.2(2)(b))
Test Method: ASTM International Standard ASTM F963-11, Section 8.3.1 and Annex A7.
Sample Color I Component location Style IdentitY
Type 1: Substrate other than modelino clay A Black printed pink flocked pink foam Hat 1
Black printed red flocked red foam Hat 2 Black printed purple flocked purple Hat 3 foam
Analyte As Ba Cd Cr Hg Pb Sb Se
Max. Limit
i~~~~l 25 1000 75 60 60 90 60 500
Max. limit Type II <nig!kg) 25 250 50 25 25 90 60 500
Analyte As I Ba I Cd I Cr Ho I Pb I Sb I Se Conclusion Sample Result mg!kg)
A LT7 I 2200 I LT10 I LT7 LT5 I LT10 I LT10 I LT10 DATA
mglkg = milligrams per kilogram (ppm=parts per million) As = Arsenic, Ba = Barium, Cd = Cadmium, L T = Less Than Cr = Chromium, Hg = Mercury, Pb = Lead, ND = None Detected Sb = Antimony, Se = Selenium Detection limit (mg/kg): As and Cr = 7, Hg = 5, other elements = 10 Remark: Textiles (natural or synthetic) are exempted for lead content requirement according to clarification of Toy Industry Association for ASTM F963-11. The lead content analysis result of corresponding material herein is for client's reference only. On an initial analysis for soluble heavy metals content, any individually tested component of greater than the set limit or any composite tested components of greater than 80% of the set limit, the result is inconclusive for the requirement and therefore were retested with soluble heavy metals analysis of ASTM F963-11, Sections 8.3.5 (excluding 8.3.5.5(3)) as specified in Section 8.3.1.3. The result herein is for reference only (show data), please refer to soluble heavy metals content analysis for the corresponding conclusive results.
iBUREAU VERITAS
Technical Report: (8514)148-0932 June 10, 2014
TEST RESULT
SOLUBLE HEAVY METALS CONTENT IN SUBSTRATE (ASTM F963-11, Section 4.3.5.2(2)(b))
Test Method: ASTM International Standard ASTM F963-11, Section 8.3.5 (Excluding 8.3.5.5(3))
Sample ldentitv
Color I Component
Type 1: Substrate other than modelina clav A Black orinted oink flocked_j)ink foam Hat B Black orinted red flocked red foam Hat c Black printed purple flocked purple Hat
foam
Analyte As Ba Cd Cr Hg
Max. Limit Type I
25 1000 75 60 60 {mg/kg) Max. Limit
I ~ypek~l molk 25 250 50 25 25
Analytical 60% 30% 30% 30% 50% Correction
As Ba Cd Cr Hg
Analyte
Sample Result mo/kol
A LT2 LT2 LT2 LT2 LT2
B LT2 LT2 LT2 LT2 LT2
c LT2 LT2 LT2 LT2 LT2
mglkg = milfigrams per kilogram (ppm=parts per million) CR = aqjusted analytical result L T = Less Than ND = None Detected
Remark:
Location Style
1 2 3
Pb Sb Se
90 60 500
90 60 500
30% 60% 60%
Pb Sb Se Mass of
Trace Conclusion Amount
{g)
LT2 LT2 LT2 PASS
LT2 LT2 LT2 PASS
LT2 LT2 LT2 PASS
As = Arsenic, Ba = Barium, Cd = Cadmium, Cr = Chromium, Hg = Mercury. Pb = Lead, Sb = Antimon~ Se =Selenium Detection limit (mg/kg): Each element 2
Textiles (natural or synthetic) are exempted for lead content requirement according to clarification of Toy Industry Association for ASTM F963-11. The lead content analysis result of corresponding material herein is for client's reference only.
BUREAU VERITAS
Technical Report: (8514)148-0932 June 10,2014
TEST RESULT
Total Lead Content in Surface Coating - United States Consumer Product Safety Improvement Act (CPSIA) of 2008, Section 101(a)(2) I United States Code of Federal Regulations (CFR), Title 16, Part 1303
Test ltem(s) Item I Component
Locatlon(s) Style(s) Descriptlon(s)
1001 Black coating Words on hat
Parts
Maxrmum Allowable Llmrt : \90 mglkg
- Unit Result Test ltem{s) - 1001 Parameter - -Total Lead (Pbl mglkg 28
Conclusion - PASS
Note I Key: ND = Not detected ~>" :;:; Greater than mglkg = ml/ligram(s) per kilogram =ppm = part(s) per million 10 000 mg/kg = 1 % % = percent U. S. CPSC = United States Consumer Product Safety Commission
----
1-3
----
Potential Total Lead {Pb) = Estimated total lead content per component ls based on calculation by component individual weight Detection Limit (mg/kg) : 1 0
!:! UREA U" VERITAS
TEST RESULT
Technical Report: (8514)148-0932 June 10, 2014
Total Lead Content in Substrate- Greenbrier International, Inc's Requirement
Locatlon(s) Style(s)
- Unit Result Test ltem(s) - 1002 1003 1004 Parameter - - - -Total Lead (Pb) mg/kg ND ND ND
Conclusion - PASS PASS PASS
Note I Key: NO :::: Not detected ">" = Greater than mg/kg = milligram(s) per kilogram =ppm = part(s) per million 10000 mg/kg = 1 % % = percent Detection Limit (mg/kg) : 1 0
Remark: According to Children's Products Containing Lead; Exemptions for Certain Electronic Devices; Final Rule, exemption were granted to steel alloy containing up to 0.35 % lead by weight, aluminum containing up to 0.4% lead by weight and copper-based alloy containing up to 4% lead by weight.
BUREAU~ VERITAS
Technical Report: (8614)148-0932 June 10. 2014
TEST RESULT
Phthalates Content in Children's Toys and Child Care Articles· United States Consumer Product Safety Improvement Act (CPSIA) of 2008, Section 108(a)
Test Method With reference to U. S. CPSC Test Method CPSC-CH-C1001·09,3 (April 1, 2010).
Test ltem(s) Item I Component Location(s) Style(s) Descriptlon{s)
1005 Black printed pink flocked pink Hat 1 foam
1006 Black printed red flocked red foam Hat 2
1007 Black printed purple flocked Hat 3 purple foam
I Maxomum I , Allowable Limit' Each 0•1 y,
Test ltem(s) Result
Conclusion Detected Analyte(s) Cone. Unit
1005 DEHP 0.032 % PASS 1006 DEHP 0.046 % PASS 1007 DEHP 0.044 % PASS
Note I Key: ND = Not detected %=percent
u>" = Greater than Cone. = Concentration 1 % = 10 000 mg/kg
U. S. CPSC = United States Consumer Product Safety Commission mg/kg = milligram(s) per kilogram = ppm = pert(s) per million Detection Limit(%) : Each : 0.005
Remark: The list of phthalates is summarized in table of Appendix.
APPENDIX
List of Phthaiates [ U.S, CPSIA of 2008, Section 108(a)) :
No. Name of Analyte{s) CAS-No. No. Name of Analyte(s)
1 Butyl benzyl phthalate (BBP) 85-68-7 3 ~i-2-e;~yihexyl phthalate DEHP
2 Dibutyl phthalate {DBP) 84-74-2 - -CAS-No. =Chemical Abstracts Service registry number
CAS-No.
117-81-7
-
BURfAill: YfRITAS
Technical Report: (8514)148·0932 June 10, 2014
TEST RESULT
Phthalates Content in Children's Toys and Child Care Articles· United States Consumer Product Safety Improvement Act (CPSIAJ, Sections 108(a) and 108(b)(1)
Test ltem(s) Item I Component
Descriptlon(s)
i005 Black printed pink flocked pink foam
1006 Black printed red flocked red foam
1007 Black printed purple flocked purple foam
I Max1mum I 0 Allowable Limit • Each 0•1 y,
Test ltem(s) Result
1005 ND 1006 ND 1007 ND
Note I Key: ND = Not detected ">"=Greater than
%::; percent
Detection Limit(%) : Each 0.005
Remark:
1 % = 10000 mg/kg
Location(s) Style(s)
Hat 1
Hat 2 Hat
3
Cone. Unit Conclusion
ND % PASS ND % PASS ND % PASS
Cone. = Concentration mg/kg = milligram(s) per kilogram
The list of phthalates Is summarized in table of Appendix.
APPENDIX
List of Phthalates [U.S. CPSIA, Sections 10B(a) and 108(b)(1)):
No. Name of Analytes CAS-No. No. Name of Analytes CAS-No.
1 Butyl benzyl phthalate (BBP) 85-68-7 4 Di-n-octyl phthalate (DNOP) 117-84-0 2 Dibutyl phthalate (DBP) 84-74·2 5 DHso-nonyl phthalate (DINP) 28553-12-0
3 Di-2-ethylhexyl phthalate (DEHP). 117-81·7 6 Di-iso-decyl phthalate (DIDP) 26761-40-0
~IH!REAU
VERITAS
TEST RESULT
Technical Report: (8514)148-0932 June 10, 2014
Total Cadmium Content In Surface Coating- Greenbrier lnternatlonars Requirement
Test Method : With reference to U.S. CPSC-CH-E1003-09.1 (February 25, 2011).
Test ltem(s) Item I Component Locatlon(s) Descriptlon(s)
1001 Black coating Words on hat Parts
Maximum Allowable Limit : 140 mg/kg
- Unit Result Test ltemlsl - 1001 -Parameter - - -Total Cadmium (Cd) mglkg ND -
Conclusion - PASS -Note I Key:
NO= Not detected ~>" = Greater than mgikg = milligram(s) per kilogram =ppm= part(s) per million Detection Limit (mg/kg): 10
Style(s)
1-3
----
BUREAU VERITAS
TEST RESULT
Technical Report: (8514)148-0932 June 10, 2014
Total Cadmium Content In Substrate -Greenbrier International's Requirement
Test Method With reference to U.S. CPSC-CH-E1001-08.1 (June 21, 2010) or with reference to U.S. CPSC-CH-E1002-08.1 (June 21, 2010).
Test ltem(s) Item I Component
Descrlptlon(s) 1002 Pink flocked oink foam Hat 1003 Red flocked red foam Hat 1004 Pueple flocked purple foam Hat
Maximum Allowable Limit : 140 mglkg
. Unit Test ltem(s) - 1002 Parameter . -Total Cadmium (Cd) mglkg NO
Conclusion . PASS
Note I Key:
ND =Not detected ">" =Greater than mg/kg = milligram(s) per kilogram= ppm = part(s) per million Detection Limit (mg/kg) : 2
Location(s) Style(s)
1 2 3
Result 1003 1004
. . NO NO
PASS PASS
B U KE AU VEB I TAS
TEST RESULT
Technical Report: (8514)148-0932 June 10, 2014
Phthalates Content in Toys, Child Care Articles and Children Watches- California Proposition 65
Test ltem(s) Item 1 comp~r~nt Description s
Location(s) Style(s)
1005 Black printed pink flocked pink Hat 1 foam
1006 Black printed red flocked red foam Hat 2
1007 Black printed purple flocked Hat 3
I purple foam
I Maximum I , Allowable Limit · Each 0• 1 y,
Test ltem(s) Result
Conclusion Detected Analyte(s) Cone. Unit
1005 DEHP 0.032 % PASS 1006 DEHP 0.046 % PASS 1007 DEHP 0.044 % PASS
Note I Key: ND = Not detected ">~ = Greater than % = percent 1 % = 10 000 mg/kg mg/kg = mllllgram(s) per kilogram =ppm = part(s) per million Detection Limit(%) : Each : 0.005
Cone. =Concentration
Remark: The list of phthalates is summarized in table of Appendix. Accessible plastic materials, plasticizer prlnt, scrapable surface coatings, decals, unscrapable polymeric coated materials, adhesives and sealants, toy nail polish, reusable packaging, electrical plug and cables of toys and child care articles are applicable to be tested with the exclusion for adhesive for stickers. All accessible plastic substrates of children watches are applicable to be tested. Vendor Is responsible for the compliance of all other material(s) which was (were) not tested above. Product(s) with phthalate(s) content exceeding this maximum allowable limit has (have) to reformulate.
APPENDIX
List of Phthalates [California Proposition 65- Toys, Child Care Articles And Children Watches]:
No. Name of Analyte{s) CAS-No. No. Name of Analyte(s) CAS-No.
1 Butyl benzyl phthalate (BBP) 85-68-7 4 Di-iso-decyl phthalate (DIDP) 26761-40-0
2 Dibutyl phthalate (DBP) 84-74-2 5 Di-n-hexyl phthalate (DnHP) 84-75-3
3 Di-2-ethylhexyl phthalate (DEHP). 117-81-7 - - .
CAS-No. = Chemical Abstracts Service registry number
TEST RESULT
Technical Report: (8514)148-0932 June 10. 2014
Total Lead Content In Toys and Child Care Articles. California Proposition 65
Test Method : With reference to U. S. EPA 3051A: 2007.
Test ltern(s) Item I Component
Location(s) Style(s) Oescriptlon(s) 1002 Pink flocked pink foam Hal 1 1003 Red flocked red foam Hat 2 1004 Pueple flocked purple foam Hat 3
Baby bibs or polyvinyl chloride (PVC) component in Maximum Allowable Type I
tovs and child care articles : 200 mg/kg Limit: Type II Non polyvinyl chloride (PVC) component in toys and
child care articles : 600 mg/kg
- Unit Result Test ltem(s) . 1002 1003 1004 Type - II II II Parameter . . . -Total Lead (Pb) mg/kg NO NO ND
Conclusion - PASS PASS PASS
Note/ Key: ND = Not detected ">" = Greater than mg/l<g = mllligram(s) per kilogram= ppm= part(s) per million 10 000 mg/kg = 1 % % =percent U. S. EPA= United States Environmental Protection Agency Detection Limit (mg/l<g): 10
Remark: Non-suspect materials as defined by United States Consumer Products Safety Commission (CPSC) in Code of Federal Regulations (CFR), Title 16, Sections 1500.91(d) and (e) are exempted from this total lead content testing. Vendor is responsible for the compliance of all other material(s) which was (were} not tested above. Product(s) with total lead content exceeding this maximum allowable limit has (have) to reformulate.
: aU REA U VERITAS
TEST RESULT
Technical Report: (8514)148-0932 June 10, 2014
( • 8 5 ~ I 41) I l f4 8 -/o 9 3 2
CONSUMER PRODUCTS SERVICES DlVISlON
Technical Report: Date Received:
RESULT: PASS (US/CN)
Sample Description:
Vendor; Manufacturer;
Buyer: Labeled Age Grade: Appropriate Age Grade: Tested Age Grade: Client Specified Age Grade: Ref#: Country of Origin: Assortment No.: Sample Infonnation: Countries of Sale:
Sample Description:
(8514)148-0931 May28,2014
BOYS DRESSUP WESTERN HAT ASTD 1.) BLACK 2.) BROWN PARTS MONDAY BEAUTY LTD RUYJ HOLDING GROUP CO., LTD. NIA NOT PRESENT OVER 3 YEARS OF AGE OVER 3 YEARS OF AGE NOT SPECIFIED N/A CillNA N/A NIA US/CANADA
Sample Size: Style No(s):
Sampling:
June 12,2014
24+1 LOT(S) N/A
y
Bureau Veritas Shenzhen Co., Ltd 4/F, Block B, Min!kla Industrial Building, 4th Zone of Honghualing Industrial Park, Xili Town, Nanshan District, Shenzhen, Guangdong, P .R.C.
Th•uepa.rtls governed by, nnd lnO<>IpOfMes by rolerence, the C~ndi!fons oiTesllng a, pooled altho dale oliml;m«o of thiUCJXIrt nl http:JNN.w.bweowerita'O.wm/cps Md 1o lnten<!ed for yow e~du!lve ~·•· Ani ~;~~pj'ing or replioa~on of thlo roport to or for eoy other pmon or enfl)'. or U$~ of our ~a/0~ or lld•mark. I• permitted cdr ""th our prlonlriflen perm1ulon. Thio report uts forth our indn(IS oolely ...!U1 re1pecl to the teo! oamplu ldon6te4 he1eln. The reoutl$ set fonh In lhl~ repott au not lmicriv& or up:nentativo oflho que lily ordloract~rlsfcs olllle follrom llllll<h a teo\ •ample was taken or ar~~ similar or ldenli~al ptO<Iu~l union spct:li~ly I!Jld exp<enly noted. OUr rtport lndudta all of fhe loots requesto~ by yoo ond lllo ruoUo thereof b .. ed ~pon !he information lila! ~u provided to ""· You howe 60 day• !rom date ofluuance ollht• report to noU!y ut of anY material error OJ omission c.auoed b~ Ol!f ncgll~once; ptovfded, however, that •u<h no~u shall be In >lilting and ohalt opeclfloally ldd<ess the l•oue yoo ...!sh to raise. A h~ure to raho ouch luuo vdlhJn tho preunbod ~me £!tilt ...,,mule you tmqualffled accepl011ce of the complel..,eu of this report, tho Ills!> con<klcted an<! Ike
Tel: 86-755-86165200 Fax: 86-755-86185206 www.bureauveritas.com/cps CO!<.W.e .. oflhore ...-.!Mts.
sBUREAU VE R ITAS
TEST: • Cellulose nitrate [SORJ201 1~17] • Canada toy regulation [SOR/2011~17] • Mechanical hazards~ toys [AS1M F963-11] • Flammability of solids [16 CPR 1500.44]
Age grading [CPSC AGE DETERMINATION GUIDELNES 116 CFR PART 1200]
• Consumer packing and labeling act and regulations [Consumer packaging and labeling regulations]
• DNOP IDINP IDIDP content [CPSIA] • Heavy metals content in surface coatings [Canada
Toys Regulations (SOR/2011-17) section 23] • Total cadmium content in substrate materials [CPSC·
CH-El002·08 modified I CPSC-CH-ElOOl-08 modified]
• Total lead content in substrate materials [CPSIA] • Total lead content in toys and child care articles [CA
Prop 65] • Illinois lead warning label [Illinois]
• Illinois lead content in surface coatings [Illinois ]
• Client bisphenol A content
• GRBI Washington 66 CHCC·doc
The sample(s) MEET the following requirement(s):
Technical Report: (8514)148-0931 June 12,2014
• Net content (CPSD·fiL..01056-MTIID] • Country of origin [Canadian customs tariff]
Tracking label for children's product [CPSIA] • Country of origin [19CFR 134]
Unifonn Packaging And Labeling Regulations [NIST handbook 130 part IV A]
• BBP I DBP I DEHP content [CPSIA]
• Labeling review· toys [ASTM F963-ll] • Soluble heavy metal contents in substrate [ASTM
F963-ll] • Total heavy metal contents in substrate [ASTM
F963-ll]
• Total lead content in surface coatings [CPSIA] • Phthalates content in toys, child care articles and
watches [CA Prop 65] • Heavy metal content in packaging materials
document review (TPCHJ • Client's limit is 90ppm for "Total Lead Content In
Substrate Materials [CPSIA)" • Total cadmium content in surface coatings [CPSC·
CH-Et003·09.1 modified]
The cellulose nitrate requirements of Canada Toys Regulations, SOR/2011-17, section 21.
Canada toy regulation [SOR/201 1-17]
The oountry of origin marking of the Canadian "Marking ofimported Goods Order, C.R.C., c.535".
The mechanical hazards requirements of AS1M F963-ll, "Standard consumer safety specification for toy safety".
The tracking label requirement of the Consumer Product Safety Improvement Act (CPSIA) of 2008 section 103 Tracking Labels for Children's Products.
The flammability requirements of 16 CFR 1500.3(c)(6)(vi), "Flammable solid" (FHSA regulations).
Customs requirements on the placement of country of origin marking 19 CFR 134. I 1, "Country of origin of marking".
The age grade requirements of"CPSC Age Determination Guidelines".
The Uniform Packaging and Labeling Regulations requirement ofNIST Handbook 130.
The consumer pacldng and labeling requirements of Consumer packing and labeling act and regulations.
The labeling requirements of ASTM F963-11, "Standard consumer safety specification for toy safety".
VSRJTAS
The sample(s) MEET the following requirement(s):
Technical Report: (8514)148-0931 June 12,2014
The BBP, DBP and DEHP requiremcnt(s) of the United States Consumer Product Safety Improvement Act (CPSIA) of 2008, Section 108(a).
The DNOP, DINP and DIDP requirement(s) of the United States Consumer Product Safety Improvement Act (CPSlA) of2008, Seclion !08(b)(J).
The soluble heav}' metals content in subsh·ate requirements of ASTM F963-11, "Standard Consumer Safety Specification for Toy Safety," Section 4.3.5.2(2)(b).
The total cadmium content of substrate materials requirements in client's specification ( 40ppm).
The initial total heavy metals content analysis for soluble heavy metals content in substrate requirements of AS1M F963-ll, 11Standard Consumer Safety Specification for Toy Safety," Section 4.3.5.2(2)(b).
The total lead content in substrate requirement(s) (100 milligrams per kilogram) of the United States Consumer Product Safety Improvement Act (CPSIA) of2008, Section IOI(a)(2).
The total lead content requirements in toys and child care articles according to the California Proposition 65 settlements of Alameda Superior Court, 8007350969, RG08378050 and San Francisco Superior Court 07·462991.
The Illinois lead warning label requirements of client's specification.
The BBP, DBP, DEHP, DnHP and DIDP content requirements in toys, child care articles and watches according to the California Proposition 65 settlements of County of Sacramento case number 07 AS04683, and the Alameda Superior Court case numbers 8007350969, RG08367601, RG07351032 and RG08378050.
In Ueu of testing and at the request of the client, documentation has been provided which indicates compliance with the heaVy metals content in packaging requirements of Model Toxics Legislation of the Toxics in Packaging Clearinghouse, TPCH (formerly the Coalition ofNortheastern Governors, CONEG).
The total lead content of substrate materials requirements in client's specification (90ppm).
The bisphenol A (BPA) content requirement of the client's specification.
The sample(s) and parts MEET the following requiremcnt(s):
The applicable heavy metals content requirement(s) for surface coatings of the Canada Consumer Product Safety Act (CCPSA}, S.C. 2010, c. 21, Toys Regulations SOR/2011-17, Section 23.
The total lead content of 90ppm requirements of 16 CFR 1303, "Ban of lead·containing paint and certain wnsumer products bearing lead-containing paint" as mandated by Congress in section IOJ(f} of the Consumer Products Safety Improvement Act (CPSIA) of2008, Public Law 110·314.
The total lead content of surface coating requirements of Illinois Lead Poisoning Prevention Act, Public Act 095-1019, in client's specification (40ppm).
The total cadmium content of surface coating requirements in client's specification
The result of the following requirement(s) is considered as MARGINAL under the following requirement(s):
In lieu of testing and at the request of the client, documentation has been provided which rated as MARGINAL for the chemical content requirement of the client's specification with reference to the Chemicals of high concern to children (CHCC) content as contaminant~ Washington redsed code (RCW), Chapter 70240 Children's Safe Product Act (CPSA).
VERITAS
Technical Report: (8514)148-0931 June 12,2014
The sample(s) was tested to the following requirement(s) and the data provided is for informational purposes only:
The net content verification of the client's testing program.
Note: The sample(s) was not evaluated to the Normal Use testing requirements specified in ASTM F963-1l, Section 8.5. It is the responsibility of the manufacturer, vendor or distributor to conduct tests that will simulate nonnal use conditions. These tests shall ensure that hazards are not generated through normal wear and deterioration of the sample(s). These tests shall also simulate the normal play mode of the toy and to simulate the expected mode of use of the particular toy. The tests shall be conducted in an expected use environment. These normal use tests shall simulate the intended use of the toy based on its estimated lifetime.
Note: The received sample(s) contained surface coating(s) which are bonded to the substrate materials during the manufacturing process and cannot be scraped off for testing, therefore such coating material(s) was not subject to the heavy metals analysis of surface coating in ASTM F963~11, 01Standard consumer safety specification on toy safety", section 4.3.5.1(2).
Note: Insufficient surface coatings were found on the submitted samples. TI1erefore, the heayy metals tests were conducted on the submitted parts
Note: Based on visual evaluation and/or material breakdown received, there is no polyvinyl chloride (PVC) found in the samples submitted and thus the corresponding testing of the Canada Consumer Product Safety Act with reference to the Hazardous Products Act, SOR/20 10-298 regarding to the restriction of use of certain phthalates content have not been conducted. ·
WC/ms
cc: SUNNY YU2, MONDAY BEAUTY LTD EAGLE., MONDAY BEAUTY LTD TERRY., MONDAY BEAUTY LTD CARMEN ,MONDAYBEAUTYLTD DEREK ,MONDAY BEAUTY LTD
BUREAU VERITAS SHENZHEN CO.,L TD
WendyCha Manager Toys And Juvenile Products Department
ELU BEAU VERITAS
TEST RESULT
Technical Report: (8514)148-0931 June 12., 2014
TOTAL LEAD CONTENT IN SURFACE COATING {Illinois General Assembly, Public Act 095-1019)
Test Method: Acid digestion followed by Atomic Absorption Spectrophotometry or Inductively Coupled Plasma Spectrometry
Anal te Lead Requirement: Maximum allowable limit: 40 mgikg
Analvte Lead Pb Samole Description Result Conclusion
Color I Component location Stvle lmoikol {A) I White coating Words inner hat 1,2 LT 10 PASS
Parts
LT = Less Than mg/kg = milligrams per kilogram (ppm=parts per mi!Hon) *=Average of duplicate analysis
CLIENT'S TOTAL CADMIUM CONTENT IN SURFACE COATING {40PPM)
Anal te Cadmium Requirement: Maximum allowable limit 40 mgikg
Analyte Cadmium (Cd) Sample Oesc_r:jJ?~ion Result Conclusion
Color I Component Location Stvle (maiko) {A) I White coating Words Inner hat 1,2 LT 10 PASS
Parts
L T = Less Than mg/kg = milligrams per kilogram (ppm=patts per million) * = Average of duplicate anaiysis
"BUREAU~ VERITAS
TEST RESULT
Technical Report: (8514)148-0931 June 12,2014
HEAVY METALS CONTENT IN SURFACE COATING (Canada Consumer Product Safety Act- Toys Regulations, SOR/2011-17 Sec. 23)
Sample Color Location Style Identity
A White coating Words inner hat 1,2 Parts
Analyte As Ba Cd Hg
Maximum I (T) - - - ND Limit (mglkg) 1 (S) 1000 1000 1000 -Anal e As Ba I Cd Ha I
Method Result (mglkg)
A (T) LT 10 76 LT 10 ND
(S) - - - -mglkg = milligrams per kilogram (ppm=parls per million) *=Average of duplicate analysis NO = Not detectable (T) = Total Analysis (S) = Soluble analysis
Pb
90
-
Pb
LT 10
-
Sb Se
- -1000 1000
I Sb Se Conclusion
LT 10 LT 10 PASS
- -L T = Less Than As = Arsenic, Ba = Barium, Cd = Cadmium, Hg = Mercury, Pb = Lead, Sb = Antimony, Se = Selenium
TOTAL LEAD CONTENT IN SURFACE COATING ("Ban of Lead-containing paint and certain consumer products bearing Lead--containing paint", Consumer Product Safety Improvement Act (CPSIA) of 2008)
Test Method: U.S. CPSC-CH-E1003.09.1
Anal te Lead Requirement: Maximum allowable limit: 90m I
Analvte Lead (Pbl Sample Description Result Conclusion
Color I Component Location Style (mg/kg) (A) I White coating Words inner hat 1,2 LT10 PASS
Parts
L T = Less Than mglkg =milligrams per kilogram (ppm=parls per million) * =Average of duplicate analyses
Remark:
In some cases, the tested component cannot be tested individually due to overlapped coatings.
tBUREAU V E R HrAS
TEST RESULT
Technical Report: (8514)148-0931 June 12, 2014
TOTAL LEAD CONTENT IN SUBSTR.A. TE (100PPM) (Consumer Product Safety Improvement Act (CPSIA) of 2008)
Test Method: U.S. CPSC-CH-E1001-08.1 (June 21, 2010) or U.S. CPSC-CH-E1002-0B.1 (June 21, 2010).
Lead 100 mg/kg
Conclusion
LT = Less Than mglkg = milligrams per kilogram (ppm=parts per million) ~< :::Average of duplicate analyses
BUREAU
TEST RESULT
Technical Report (8514)148-0931 June 12, 2014
TOTAL LEAD CONTENT IN TOYS AND CHILD CARE ARTICLES (California Proposition 65 settlements of Alameda Superior Court BG07350969, RG08378050, San Francisco Superior Court 07-462991)
Test Method: Acid digestion followed by Atomic Absorption Spectrophotometry or Inductively Coupled Plasma Spectrometry
Maximum allowable limit
Analyte lead Type 1 All product except baby bibs (PVC) 200 mglkg Type2 All product except baby bibs (non PVC) 600 mglkg Type3 Baby bibs 200 mg/kg
Analyte Lead Pb Sample Description Result Conclusion
Color I Component I Location I Style lmglkg) Type 2: All product exceot babv bibs I non PVC) (A) Black foam I black ftockino Hat 1 13 PASS (B) White printed brown foam I Hat 2 LT 10 PASS
brown flocking
L T = Less Than mglkg = milligrams per kilogram (ppm=parls par million) * =Average of duplicate analyses
CLIENT'S TOTAL CADMIUM CONTENT IN SUBSTRATE (40PPM)
Cadmium 40 mglkg
L T = Less Than mg/kg =milligrams per kilogram (ppm=parls per million) *=Average of duplicate analysis
BUREAU" 'l E R I TJ\ S
Technical Report: (8514)148-0931 June 12,2014
TEST RESULT
TOT J\L HEJ\ VY METALS CONTENT - INITIAL ANALYSIS FOR SOLUBLE HEAVY METALS CONTENT IN SUBSTRATE (ASTM F963·11, Section 4.3.5.2(2)(b))
Test Method: ASTM International Standard ASTM F963-11, Section 8.3.1 and Annex A7.
Sample Color I Component Location Style Identity
Type 1: Substrate other than modeling clay A Black foam I black flockino Hat 1 8 White printed brown foam I brown Hat 2
flocking
Ana lyle As sa Cd Cr Hg Pb Sb Se
Max. Limit Type!
25 1000 75 60 60 90 60 500 (mg/kg) Max. Limit
i,ypek~) molk 25 250 50 25 25 90 60 500
Analyte As l Ba I Cd Cr Hg I Pb I Sb I Se Conclusion Sample Result mglkg)
A LT7 680 LT 10 10 LT5 13 LT 10 LT 10 PASS
8 LT7 2000 LT10 LT7 LT5 LT10 LT 10 LT 10 DATA
mg/kg = milligrams per kilogram (ppm=parts per million) As =Arsenic, Ba = Barium, Cd = Cadmium, LT = Less Than Cr = Chromium, Hg = Mercury, Pb = Lead, NO = Nona Detected Sb =Antimony, Se = Selenium Detection limit (mg/kg): As and Cr = 7, Hg = 5, other elements = 10
Remark: Textiles (natural or synthetic) are exempted for lead content requirement according to clarification of Toy Industry Association for ASTM F963-11. The lead content analysis result of corresponding material herein is for client's reference only.
On an initial analysis for soluble heavy metals content, any individually tested component of greater than the set limit or any composite tested components of greater than 80% of the set limit, the result is inconclusive for the requirement and therefore were retested with soluble heavy metals analysis of ASTM F963M11, Sections 8.3,5 (excluding 8.3.5.5(3)) as specified In Section 8.3.1.3. The result herein is for reference only (show data), please refer to soluble heavy metals content analysis for the corresponding conclusive results.
llllREAU VERIIAS
TEST RESULT
Technical Report: (8514)148-0931 June 12,2014
CLIENT'S TOTAL LEAD CONTENT IN SUBSTRATE MATERIALS (90PPM)
Test Method:
L T = Less Than
EPA 3051/3050 Acid digestion followed by Atomic Absorption Spectrophotometry or Inductively Coupled Plasma Spectrometry
Lead 90 mg/kg
Conclusion
2
mglkg = milligrams per kilogram {ppm=parts per million) .. = Average of duplicate analyses
BUREAU VE R IT AS
TEST RESULT
Technical Repnrt: (8514)148-0931 June 12,2014
PHTHALATES CONTENT IN CHILDREN'S TOYS AND CHILDCARE ARTICLES (Consumer Product Safety Improvement Act (CPSIA) of 2008 Sec.108(a) Prohibition On Sale of Certain Products Containing Specified Phthalates - BBP I DBP I DEHP CONTENT)
Test Method: With reference to U.S. CPSC-CH-C1001-09.3 (Aprll1, 2010).
2
BBP DBP DEHP 0.1 0.1 0.1
Anaiyte BBP I DBP I DEHP Conclusion Sample Result(%)
A LTO.OOS LT 0.005 LT0.005 PASS
8 LT0.005 LT0.005 LT0.005 PASS
Detection Limit: BBP =Butyl benzyl phthalate (0.005%) Results reported in percentage DBP = Dlbutyl phthalate (0.005%) L T = Less than DEHP = Di(2-ethylhexyl) phthalate (0.005%) ND = None defected
"BUREAU" VERITAS
TEST RESULT
Technical Report: (8514)148-0931 June 12,2014
BBPIDBPIDEHPIDnHPIDIDP PHTHALATES CONTENT REQUIREMENTS IN TOYS, CHILD CARE ARTICLES AND WATCHES (California Proposition 65 settlements of County of Sacramento case number 07AS04683, and the Alameda Superior Court case numbers BG07350969, RG08367601, RG07351032 and RG08378050)
Sample Color I Component location Style IdentitY
A Black foam I black flockin Hat 1 B Whlte printed brown foam I brown Hat 2
flockina
Anal te: BBP DBP DEHP DnHP DIDP Limit %: 0.1 0.1 0.1 0.1 0.1
Analyte BBP I DBP I DEHP I DnHP I DIDP Conclusion Sample Result(%)
A LT0.005 LTO.oos· LT0.005 LT0.005 LT0.005 PASS
B LT0.005 LT0.005 LT 0.005 LT0.005 LT0.005 PASS
Detection Limit : BBP = Butyl benzyl phthalate (0.005%) Results reported in percentage DBP = Dibutyl phthalate (0.005%) L T = Less than DEHP = D/(2-ethythexyl) phthalate (0.005%) ND = None detected DnHP = Dl-n-hexyl phthalate (0.005%) D/DP = Di-iso-decyl phthalate (0.005%)
~aU REA uc VERiiA:S
TEST RESULT
Technical Report: (8514)148-0931 June 12, 2014
PHTHALI\TES CONTENT IN CHILDREN'S TOYS AND CHILDCARE ARTICLES (Consumer Product Safety Improvement Act (CPSIA) of 2008 Sec. 1 08(b){1) Prohibition On Sale of Certain Products Containing Specified Phthalates - DNOP I DINP I DIDP CONTENT)
Test Method: With reference to U.S. CPSC-CH-C1001-09.3 (April1, 2010).
Sample Color I Component Location Style Identity
A Black foam I black ffocklng Hat 1 8 White printed brown foam I brown Hat 2
ffocklnQ
DNOP DINP DIDP 0.1 0.1 0.1
Analyle DNOP I DINP DIDP Conclusion Sample Result(%)
A LT0.005 LT0.005 LT 0.005 PASS
8 LT0.005 LT0.005 LT 0.005 PASS
Detection Limit: DNOP = Di-n-octyl phthalate (0.005%) Results reported In percentage DINP = 01-iso-nonyl phthalate (0.005%) L T = Less than DIDP = Di-iso-decyl phthalate (0.005%) ND = None detected
Technical Report: (8514)148-0931 June 12,2014
TEST RESULT
SOLUBLE HEAVY METALS CONTENT IN SUBSTRATE (ASTM F963·11, Section 4.3.5.2(2)(b))
Test Method: ASTM International Slandard ASTM F963-11. Section 8.3.5 (Excluding 8.3.5.5(3))
Sample I Identity
Color I Component I Tvoe 1: Substrate other than modelina c!av A 1 White printed brown foam I brown 1 Hat
ftocklna
Analyte As Ba Cd Cr Hg
Max. Limit
T~~~) (m 25 1000 75 60 60
Max. Limit Type II
25 250 50 25 25 (mo/kg) Analytical
60% 30% 30% 30% 50% Correction
As Ba Cd Cr Hg
Analyte
Sample Result ma/kal
A LT2 LT2 LT2 LT2 LT2
mglkg = milligrams per ki/ogrem (ppm=parls per million) CR = adfusted analytical result L T = Less Than NO = None Detected
Remark:
Location I Style
I 2
Pb Sb Se
90 60 500
90 60 500
30% 60% 60%
Pb Sb Se Mass of
Trace Conclusion Amount
(g)
LT2 LTZ LT2 PASS
As =Arsenic, Ba = Barium, Cd = Cadmium, Cr = Chromium, Hg = Mercury, Pb = Lead, Sb = Antimony, Se = Selenium Detection limit (mglkg): Each element 2
Textiles (natural or synthetic} are exempted for lead content requirement according to clarification of Toy Industry Association for ASTM F963-11. The lead content analysis result of corresponding material herein is for client's reference only.
BUR E'l\ U' VERI1117\S
TEST RESULT
BISPHENOL A (BPA) CONTENT (Client's specification)
Analyte
Maximum allowable limit:
Analyte
Test Component Color/Component Location
A./ White printed Words Inner hat Brown foam/ brown flocking Hat
mglkg = milligrams per kilogram
Technical Report: (8514)148-0931 June 12,2014
BisphenoiA
30 mg/kg
Bisphenol A
Result Conclusion Style No. (mglkg)
1,2 1.03 Pass
1
BUREAU VERITAS
TEST RESULT
Technical Report: (8514)148-0931 June 12,201 4
BUREAU VERITAS
TEST RESULT
Technical Report: (8514)148-0931 June 12,2014