Technical Report: (8513)214-0386 Date Received: RESULT: PASS

CONSUMER PRODUCTS SERVICES DIVISION

Technical Report: Date Received:

RESULT: PASS (US&CN)

Sample Description:

Vendor:

Buyer: Labeled Age Grade: Appropriate Age Grade: Tested Age Grade: Client Specified Age Grade: Ref#: Country of Origin: Assortment No.: Sample Information: Countries of Sale:

Test Type:

Bureau Verltas Shenzhen Co., Ltd

(8513)214-0386 August 02, 2013

WIND UP CMAS FIGURE 1.) SANTA CLAUS 2.) PENGUIN MONDAY BEAUTY LTD

NIA NOT PRESENT OVER J YEARS OF AGE OVER 3 YEARS OF AGE NOT SPECIFIED NIA CHINA NIA N/A US/CANADA

INITIAL TEST

Sample Size: Style No(s):

Vendor Item No.: Sampling: Submission Process:

24 N/A

N/A y

August 12, 2013

SINGLE SAMPLE COLLECTION

4/F, Block B, Mini ida Industrial Building, 4th Zone of Honghualing Industrial Park, Xili Town, Nanshan District, Shenzhen, Guangdong, P.R.C.

Th!o ••P<Ifllo govorned by, WJd l~«l!pwales by leferen<e, tho Condi~oM of Testing as posted al tile dol" ~llso""'"" of U~s report~~ hllj>JMww.bureaworilas,comlo;p• ond Is i<lt•nded f<lr )'QUf exduslvt usa. My cop)'ln~ o: replleation ol thl• ropoot lo .,.. for any o\her p~r~on or tntily, or use of our n3me or lrademosk, Is permltled or'Ayv.!lh I)!Jf pri«lllilten po/JT\!Uion. This •"''o<t "'to forth Ol>l finolng~ sol.ty v.!th r~pocllo tho\,.1 ~amplu ldon~ied hereln. The ,.,Iii$ 101 forth In this roport orel\0\lncfCIItin or repruoniAiivo of !he 'l"•~lv or <h•r~tltrMos of the lol kom v.Nch a lui urnple W;lij Ioken or any srm!lar or k!onticlll prodiJ<l unl .. f Of>oeiftoaly ood f>prt0$1y n~•d. our repoot rncl<~d!l oll of the \ellt lt~ .. ltd ~Y you ond !ho ruul!s thereof bned Uf1M tht lnfo:ma6on thati'OII ptQYJdod 1o u~. Vou hove 60 days from dale ofliOuan~ of lhl= roporllo no~fy"" of any materiol M<'f.,.. Qnlli$1M ~uoed by our negligence;provldod, however. that st."ll n<>leo thall be In 'Miting and lillall•pocificolty addre .. the fnue Y<IU v.(sh t<> ~u. A fa~ure to mi .. oueh lmro v.ilhln th& pr!~oribed ~me !.half eonstiMe you ~nqudfied aceeptonce of tho <""'!'lelen••• ol!llls rep ott. thel~oto condv~d Md tho

Tel: 86·755·66185200 Fax: 86-755-86185206 www.bureauveritas.com/cps correW.ou of there CM!onls.

TEST: • BBP I DBP I DEHP content [CPSIA] • Cellulose nitrate [SOR/20llwl7]

• Country of origin [Canadian customs tariff] • Heavy metals content in surface coatings [Canada

Toys Regulations (SOR/2011-17) section 23] Mechanical hazards- toys [ASTM F963-ll]

• Total cadmium content in substrate materials [CPSCCH-EIOOZ-08 modified I CPSC-CH-EIOOI-08 modified]

• Total heavy metal contents in substrate [ASTM F963·11]

• Total lead content in substrate materials [CPSfA] • Total lead content iu toys and child care articles [CA

Prop 65] • Flammability of solids [16 CPR 1500.44] • Uniform Packaging and Labeling Regulations [NIST

Handbook !30 Part IV A] • Age grading [CPSC Age Determination Guidelines I

16 CPR Part 1200] • Illinois lead content in surface coating [Illinois]

• GRBI Washington 66 CHCC cc.ntent- doc

The sample(s) MEET the following requirement(s):

Technical Report: (8513)214-0386 August 12, 2013

• Canada toy regulation [SORJ20ll-17] • Consumer packing and labeling act and regulations

[Consumer packaging and labeling regulations] • DNOP I DINP I DlDP content [CPSIA]

Labeling review- toys [ASTM F963-ll]

• Phthalates content in toys, child care articles and watches [CA Prop 65] Total cadmium content in surface coatings [CPSCCH-EIOOJ-09.1 modified]

• Total heavy metal contents in surface coatings [ASTM F963·11]

• Total lead content in surface coatings [CPSIA) • Tracking label for children's product (CPSIA]

• Country of origin [19 CFR 134] • Accuracy or adequacy of instructions [CPSD-HL-

01057-MTHD] • Heavy metal content in packaging materials

document review[TPCH] • Client's limit is 90ppm for ''total lead content in

substrate materials [CPSIA]"

The BBP, DBP and DEHP requirement(s) of the United States Consumer Product Safety Improvement Act (CPSIA) of 2008, Section 108(a).

Tite mechanical hazards requirements of the tested sections of Canada Consumer Product Safety Act, Toys Regulations, SOR/20Jlw17 and Schedule 2.

The labelling requirements of the tested sections of the Canada Consumer Product Safety Act, Toys Regulations, SOR/201H7.

The cellulose nitrate requirements of Canada Toys Regulations, SOR/2011w17, section 21.

The consumer packing and labeling requirements of Consumer packing and labeling act and regulations.

The country of origin marking of the Canadian "Marking oflmported Goods Order, C.R.C., c.53S".

The DNOP, DINP and DIDP requirement(s) of the United States Consumer Product Safety Improvement Act (CPSIA) of2008, Section !08(b)(l).

The applicable heavy metals content requirement(s) for surface coatings of the Canada Consumer Product Safety Act (CCPSA), S.C. 2010, c. 21, Toys Regulations SOR/2011-17, Section 23.

Tite labeling requirements of ASTM F963-ll, "Standard consumer safety specification for toy safety''.

The mechanical hazards requirements of ASTM F963-ll, ustandard consumer safety specification for toy safety".

The sample(s) MEET the following requirement(s):


The BBP, DBP, DEHI», DnHP and DIDP content requirements in toys, child care articles and watches according to the California Proposition 65 settlements of County of Sacramento case number 07AS04683, and the Alameda Superior Court case numbers BG07350969, RG0836760l, RG07351032 and RG08378050.

The total cadmium content of substrate materials requirements in client's specification (75 ppm).

The total cadmium content of surface coating requirements in client's specification

The initial total heavy metals content analysis for soluble heavy metals content in non-metallic substrate requirements of ASlM F963-ll, "Standard Consumer Safety Specification for Toy Safety," Section 4.3.5.2(2)(b).

The initial total heavy metals content analysis for soluble heavy metals content in surface coating requirements of ASTM F963-ll, "Standard Consumer Safety Specification for Toy Safety," Section 4.3.5.1(2).

The total lead content in substrate requirement(s) (100 milligrams per kilogram) of the United States Consumer Product Safety Improvement Act (CPSIA) of2008, Section lOI(a)(2).

The total lead content of 90ppm requirements of 16 CPR 1303, "Ban of lead-containing paint and certain consumer products bearing lead-containing paint'' as mandated by Congress in section 101(f) of the Consumer Products Safety Improvement Act (CPSIA) of2008, Public Law 110-314.

The total lead content requirements in toys and child care articles according to the California Proposition 65 settlements of Alameda Superior Court, BG07350969, RG08378050 and San Francisco Superior Court 07-462991.

The tracking label requirement of the Consumer Product Safety Improvement Act (CPSIA) of 2008 section 103 Tracking Labels for Children's Products.

The flammability requirements of 16 CPR 1500.3(c)(6)(vi), "Flammable solid" (FHSA regulations).

Customs requirements on the placement of country of origin marking, 19 CFR 134.11, "Country of origin marking".

The Uniform Packaging and Labeling Regulations requirement ofNIST Handbook 130.

The accuracy or adequacy of instructions requirements of client's specification.

In lieu of testing and at the request of the client, documentation has been provided which indicates compliance with the hea\'Y metals content in packaging requirements of Model Taxies Legislation of the Taxies in Packaging Clearinghouse, TPCH (formerly the Coalition ofNortheastern Governors, CONEG).

The total lead content of surface coating requil·ements oflllinois Lead Poisoning Prevention Act, Public Act 095-1019, in client's specification (40ppm).

The total lead content of substrate materials requirements in client's specification (90ppm).

In lieu of testing and at the request of the client, documentation has been provided which indicates compliance with the chemical content requirement of the client's specification with reference to the Chemicals of high concern to children (CHCC) content as contaminant- Washington revised code (RCW), Chapter 70.240 Children's Safe Product (CPSIA).

The sample(s) was tested to the following requirement(s) and the data provided is for informational purposes only:

The age grade requirements of"CPSC Age Determination Guidelines".

Tcchn;oal Reporto {8513)214-0386 August 12,2013

Note: l11e sample(s} was not evaluated to the Normal Use testing requirements specified in ASTM F963-ll, Section 8.5. It is the responsibility of the manufacturer, vendor or distributor to conduct tests that will simulate normal use conditions. These tests shall ensure that hazards are not generated through normal wear and deterioration of the sample(s). These tests shall also simulate the nonnal play mode of the toy and to simulate the expected mode of use of the particular toy. The tests shall be conducted in an expected use environment. These normal use tests shall simulate the intended use of the toy based on its estimated lifetime.

Note: Based on visual evaluation and/or material breakdown received, there is no polyvinyl chloride (PVC) found in the samples submitted and thus the corresponding testing of the Canada Consumer Product Safety Act with reference to the Hazardous Products Act, SOIV20J0-298 regarding to the restriction of use of certain phthalates content have not been conducted.

WC/ag/pl

cc: SUNNY YU, MONDAY BEAUTY LTD EAGLE., MONDAY BEAUTY LTD CARMEN , MONDAY BEAUTY LTD DEREK , MONDAY BEAUTY LTD

BUREAU VERITAS SHENZHEN CO.,LTD

WendyCha Manager Toys And Juvenile Products Department

Technical Report: (8513)214-0386 August 12,2013

TEST RESULT

ToTAL LEAD CONTENT IN SURFACE COATING ("Ban ofLead~contnining paint and certain consumer products bearing Lead~containing paint", Consumer P1·oduct Safety Improvement Act (CPSIA) of2008))

Test Method: U.S. CPSC-CH-EI003.09.1

Anal 'le Lead Requirement: Maximum allowable limit: 90 mg/kg

Analvte Lead (Pb) Sample Description Result Conclusion

Color I Component Location Stvie (mg/kg) (A) Flesh I black coating I bright white Santa I ND PASS

underlying Santa I Eyes of penguin 2

(B) Bricl1t red coating Outfit of santa I ND PASS (C) Bright white coating Bod)' I,2 ND PASS

Hat 2 (D) Flat red I flat green coating I Nose I,2 ND PASS

bright white underlying Present 2 Present 2

(E) Bright green coating I bright white Hat 2 ND PASS underlvinl!.

LT = Less Than mg/kg = milligrams per kilogram (ppm=parts per million) • =Average of duplicate qnalyses

Remark:

In some cases, the tested C<lmponent cannot be tested individually due to overlapped coatings.

'

TEST RESULT

CLIENT'S TOTAL CADMIUM CONTENT IN SURFACE COATING (40PPM)

Analyte Sample Description

Color I Component i.Qcation Style (A) Flesh I black coating I bright Santa I

white underlying Santa I Eves of penauin 2

(B) Bright red coating Outfit of santa I (C) Bright white coating Body 1,2

Hat 2 (D) Flat red I flat green coating I Nose 1,2

bright white underlying Present 2 Present 2

(E) Bright green coating I bright white Hat 2 underlying


Cadmium 40 mg/kg

Cadmium (Cd) Result Conclusion

(mg/kg)

ND PASS

ND PASS ND PASS

ND PASS

ND PASS

LT = Less Than mg/kg =milligrams per kilogram (ppm=parts per million) * "'Average of duplicate analysis

TEST RESULT


iiEAVY METALS CONTENT IN SURFACE COATING (Canada Consumer Product Safety Act~ Toys Regulations, SOR/2011-17 Sec. 23)

Sample Color Location Style Ideniity

A Flesh I black coating I bright white Santa I underlying Santa I

Eyes of penguin 2 B Bright red coating Outfit of santa I c Bright white coating Body I,2

Hat 2 D Flat red I flat green coating I bright Nose I,2

white underlying Present 2 Present 2

E Bright green coating I bright white Hat 2 underlving

Analyte As Ba Cd Hg Pb Sb Se

Maximum I<TJ - - - ND 90 . . Limit (mg/kg) 1 (S) 1000 1000 1000 . . IOOO 1000

Anal te As I Ba Cd I Hg Pb I Sb I Se Method Result (mg/k !) Conclusion

A (T) ND 2IO ND

B (T) ND 260 ND

c (T) ND 69 ND

D (T) ND 84 ND

E (T) ND 160 ND

mg/kg =milligrams per kilogram (ppm=parts per million) *=Average of duplicate analysis ND =Not detectable (T) =Total Analysis (S) = Soluble analysis

ND ND

ND ND

ND ND

ND ND

ND ND

ND ND PASS

ND ND PASS

ND ND PASS

ND ND PASS

ND ND PASS

LT =Less Than As = Arsenic, Ba = Bari1m1, Cd = Cadmium, Hg =Mercury, Pb =Lead, Sb =Antimony, Se = Selenium

TEST RESULT


TOTAL LEAD CONTENT IN SURFACE COATING (Illinois General Assembly, Public Act095-1019)

Test Method: Acid digestion followed by Atomic Absorption Spectrophotometry or Inductively Coupled Plasma Spectrometry

Anal ·te Lead Requirement: Maximum allowable limit: 40 mg/kg

Analvte Lead (Pb) Sample Description Result Conclusion

Color I Component Location Style (mg/kg)

(A) Flesh I black coating I bright white Santa I PASS underlying Santa I ND

~yes of~~_g1,1in 2 (B) Bright red ooating Outfit of santa I ND PASS

(C) Bright white coating Body I,2 ND

PASS Hat 2

(D) Flat red I flat green coating I Nose I,2 PASS bright white underlying Present 2 ND

Present 2 (E) Bright green coating I bright white Hat 2

ND PASS underlying

LT = Less Than mg/kg = milli'grams per kilogram (ppm""parls per million) • =Average of duplicate analysis


TEST RESULT

TOTAL HEAVY METALS CONTENT ·INITIAL ANALYSIS FOR SOLUBLE HEAVY METALS CONTENT IN SURFACE COATING (ASH! F963-11, Section 4.3.5.1(2))

Test Method: ASTM International Standard ASTM F963-11, Sec.tion 8.3. l and Annex A7.

Sample Idenfitv

Color I Component Location Style

A Bright red coating Outfit of santa I B Bright white coating Body 1,2

Hat 2

Analyte As Ba Cd Cr Hg Pb Sb Se Max. Limit

25 1000 75 60 60 90 60 500 (mg/kg)

Analvte As I Ba I Cd Cr I Hg I Pb Sb I Se Sample Result (mg/kg)

Conclusion

A ND 260 ND ND

B ND 69 ND 12

mg/kg"" milligrams per kilogram (ppm=parts per miWon) LT =Less Than

ND

ND

ND ND ND PASS

ND ND ND PASS

As =Arsenic, Ba = Barium, Cd = Cadmium, Cr =Chromium, Hg =Mercury, Pb =Lead, Sb =Antimony, Se =Selenium

TEST RESULT


TOTAL LEAD CONTENT IN SUBSTRATE (lOOPPJ\1) (Consumer Pmduct Safety Improvement Act (CPSIA) of 2008)

Test Method: U.S. CPSC-CH-EIOOI-08.1 (June 21, 2010) or U.S. CPSC-CH-EI002-08.1 (June 21, 2010).

Lead 100 mg/kg

Ana]yte Lead (Pb Sample Description Result Conclusion

Color I Comoonenl Location Style (mg/kg) (A) Black plastic Body 2 ND PASS

Feet 1,2 (B) White plastic Body I ND PASS (C) Dull white plastic Clockwork 12 ND PASS

I (D) Silvery metal Clockwork 1,2 16 PASS

LT =Less Than mglkg = milligrams per kilogram (ppm=parts per million) * =Average of duplicate analyses

TEST RESULT


TOTAL LEAD CONTENT IN TOYS AND CIDLD CARE ARTICLES (California Proposition 65 settlements of Alameda Superior Court BG07350969, RG083780SO, San Francisco Superior Court 07-462991)

Test Method: Add digestion followed by Atomic Absorption Spectrophotometry or Inductively Coupled Plasma Spectrometry

Maximum allowable limit

Analyte Lead

Type 1 All product except baby bibs (PVC) 200 mglkg Type2 All product except baby bibs (non PVC) 600 mglkg

Type3 Baby bibs 200 mglkg

Ana!Vte Lead (Pb) Samnle Descrintion Result Conclusion

Color I Comnonent I Location I Stvle (mdkg) Tvne 2: All nroduct excent babv bibs (non PVC) (A) Black plastic Body 2 NO PASS

Feet 1,2 (B) White nlastic Body I ND PASS (C) Dull white nlastic Clockwork 1,2 NO PASS (D) Silverv metal Clockwork 1,2 16 PASS

LT=Less Than mglkg = milligrams per kilogram (ppm=parts per million) "' =Average of duplicate analyses

TEST RESULT

CLIENT'S TOTAL CADMIUM CONTENT IN SUBSTRATE (40PPM)

Anal1:e Requirement: Maximum allowable limit:

Analyte Sample Description

Color I Component Location (A) Black plastic Body

Feet B White plastic Body C) Dull white plastic Clockwork D) Silvery metal Clockwork

Style 2

1,2 1

1,2 1,2

Technical Repmt: (8513)214-0386 August 12,2013

Cadmium 40 mg/kg

Cadmium (Cd Result Conclusion

(mg/kg)

ND PASS

ND PASS ND PASS ND PASS

LT = Less Than mglkg =milligrams per kilogram (ppm=parts per million) *=Average of duplicate analysis


TEST RESULT

TOTAL HEA \'Y METALS CONTENT- INITIAL ANALYSIS FOR SOLUBLE HEAVY METALS CONTENT IN SUBSTRATE (ASTM F963-ll, Section 4.3.5.2(2){b))

Test Method: ASTM International Standard ASTM F963-l I. Section 83.1 and Annex A7.

Sample Color I Component Identity

Type I: Substrate other than modeling clay A Black plastic Body

Feet B White plastic Body c DuH white plastic Clockwork

Analyte As Ba Cd Cr Hg

Max. Limit Type I (mg/kg) 25 1000 75 60 60

Max. Limit Type II (m!ifkg) 25 250 50 25 25

Analyte As I Ba I Cd I Cr I Hg I Sample Result (mglkg)

A ND ND ND ND

B ND 350 ND ND

c ND ND ND ND

mglkg =milligrams per kilogram (ppm=parts per million) LT = Less Than ND "" None Detected

ND

ND

ND

Detection limit (mg/kg): As and Cr = 7, Hg = 5, other elements = I 0

Remark:

Location Style

2 1,2 I

1,2

Pb Sb Se

90 60 500

90 60 500

Pb I Sb I Se Conclusion

ND ND ND PASS

ND ND ND PASS

ND ND ND PASS

As= Arsenic, Ba =Barium, Cd =Cadmium, Cr = Chromium, Jig = Mercury, Ph = Lead, Sb =Antimony, Se = Selenium

Textiles (natural or synthetic) are exempted for lead content requirement according to clarification ofToy Industry Association for ASTM F963-ll. The lead content analysis result of corresponding material herein is for client's reference only.

TEST RESULT

CLIENT'S TOTAL LEAD CONTENT IN SUBSTRATE MATERIALS (90PPM)

Toohnical Report: (8513)214-0386 August 12, 2013

Test Method: EPA 30St/3050 Acid digestion fOllowed by Atomic Absorption Spectrophotometry or Inductively Coupled Plasma Spectrometry

Anal te Lead Requirement: Maximum allowable limit: 90 mglkg

Ana lyle Lead (Pb) Samvle Description Result Conclusion

Color I Component Location Stvle . (mg/I<g}_ (A) BJack plastic Body 2 ND PASS

Feet 1,2 I (B) White plastic Body I ND PASS I (CJ Dull white plastic Clockwork 1,2 ND PASS

(D) Silvery metal Clockwork 1,2 16 PASS

LT = Less Than mgt kg= milligrams per kilogram (ppm=parts per million) * =Average of duplicate analyses

TEST RESULT

Technical Report: (8513)214-0386 August 12, 20l3

PHTHALATES CONTENTIN CIDLDREN'S TOYS AND CHILD CARE ARTICLES (Consumer Product Safety Improvement Act (CPSIA) of2008 Sec. 108(a) Prohibition On Sale of Certain Products Containing Specified Phthalates • BBP I DBP I DEHP CONTEJ\'T)

Test Method: With reference to U.S. CPSC-CH-ClOOI-09.3 (Apri11, 2010).

Sample Color I Component Location Style Identity


Eyes of penguin 2 B Bright red coatin.l!: Outfit of santa I c Bright white coating Body 1,2

Hat 2 D Flat red I flat green coating I bright Nose 1,2


E Bright green coating I bright wbite Hat 2 underlving

F Black plastic Body 2 Feet 1,2

G White olastic Bodv I H Dull white plastic Clockwork 1,2

Analyte: BBP DBP DEHP Limit(%): 0.1 O.l O.l

Analyte BBP I DBP I DEHP Conclusion Sample Result(%)

A ND ND ND PASS

B ND ND ND PASS

c ND ND ND PASS

D ND ND 0.012 PASS

E ND ND ND PASS

F ND ND ND PASS

G ND ND ND PASS

H ND ND ND PASS

Detection Limit : BBP ""'Butyl benzyl phthalate (0.005%) Results reported in percentage DBP = Dibutyl phthalate (0.005%) LT =Less than DEHP = Di(2-ethy/hexyl) phthalate (0.005%) ND = None detected

TEST RESULT


BBP/DBP/DEHP/DnHP/DIDP PIITHALATES CONTENT REQUIREMENTS IN TOYS, CHILD CARE ARTICLES AND WATCHES (California Proposition 65 settlements of County of Sacramento case number 07AS04683, and the Alameda Superior Court case numbers BG07350969, RG08367601, RG07351032 and RG08378050)

Sample Color I Component Location Style Identity


Eves ofpemmin 2 B Bri£ht red coatiu!.t Outfit of santa I c Bright white coating Body 1,2



E Bright green coating I bright white Hat 2 underlying


G White olastic Body I H Dull white plastic Clockwork 1,2

Anal te: BBP DBP DEHP DnHP DIDP Limit%: 0.1 0.1 0.1 0.1 0.1

Analyte BBP I DBP I DEHP I DnHP I DIDP Conclusion Sample Result(%)

A ND ND ND ND ND PASS

B ND ND ND ND ND PASS

c ND ND ND ND ND PASS

D ND ND 0.012 ND ND PASS

E ND ND ND ND ND PASS

F ND ND ND ND ND PASS

G ND ND ND ND ND PASS

H ND ND ND ND ND PASS

Detection Limit : BBP =Butyl benzyl phthalate (0.005%) Resulis reported in percentage DBP = Dibuty/ phthalate (0. 005%) LT =Less Ihan DEHP = Di(2wethylhe:xyl) phthalate (0.005%) ND =None detected DnHP = Di¥n~hexyl phthalate (0.005%) D!DP = Di~iso~decylphthalate (0.005%)

TEST RESULT


PHTHALATES CONTENT IN CHILDREN'S TOYS AND ClllLDCARE ARTICLES (Consumer Product Safety Improvement Act (CPSIA) of2008 Sec.t08(b)(1) Prohibition On Sale of Certain Products Containing Specified Phthnlates • DNOP I DINP I DIDP CONTENT)

Test Method: With reference to U.S. CPSC~CH~CIOOI ·09.3 (April I, 2010).

Sample Color I Component Location Style ldeniity

A Flesh I black coating I bright white Santa l underlying Santa l

Eyes of penguin 2 B Bright red coating Outfit of santa I c Bright white coating Body 1,2


while underlying Present 2 Present 2

E Bright green coating I bright white Hat 2 underlying


G White plastic Body I H Dull white plastic Clockwork 1,2

Anal ·te: DNOP DINP DIDP Limit %: 0.1 0.1 0.1

A.nalyte DNOP I DINP DIDP Conclusion

Sample Result(%)

A ND ND ND PASS

B ND ND ND PASS

c ND ND ND PASS

D ND ND ND PASS

E ND ND ND PASS

F ND ND ND PASS

G ND ND ND PASS

H ND ND ND PASS

Detection Limit : DNOP = Di~n~octyl phthalate (0.005%) Results reported in percentage DJNP = Df.Jso·nonyl phthalate (0.005%) LT = Less than DIDP = Di·iso-decyl phthalate (0. 005%) ND =None detected

', 8 UREA U VERITAS

TEST RESULT

( 8 5 113 ) 2 1 41-0 3 8 6

Tcclmical Report (8513)214-0386 August 12, 2013

Technical Report: (8513)214-0386 Date Received: RESULT: PASS

Documents

Transcript of Technical Report: (8513)214-0386 Date Received: RESULT: PASS