Technical Information - · PDF fileTechnical Information - Indicators The majority of...
Transcript of Technical Information - · PDF fileTechnical Information - Indicators The majority of...
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
66
Authority
European
UL
Technical Information - IndicatorsThe majority of Arcolectric indicator lights can be supplied with alternative light sources:
Neon, Fluorescent, Filament lamp or LED.
NEON and FLUORESCENT LAMPSColoursAvailable with Red, Amber, Green or Clear lenses.
Maximum striking voltagesStandard brightness types 65Vac 90Vdc.High brightness types 85Vac 135Vdc.High brightness types are usually fitted.
LifeTypically 25,000 hours (Green fluorescent lamps 20,000 hours). (Measured to a pointwhen the light output of the lamp is half its original level.) The end of life for a neon lamp is not usually a sudden failure.
False signals due to long wiringIt is possible for neon or fluorescent tubes to glow when they should be off. The falsesignal is caused by the capacitance effect of fairly long wiring to the indicator beingadjacent to other live cables. This effect can be prevented in most cases by fitting a 100kresistor across the supply wires close to the indicator assembly.
MATERIALSMoulded bodies and bases Nylon 6.6Metal bodies and bezels Chrome plated brass (except #)Lenses PolycarbonateTerminals (most types) Brass (electro-tin plated)Terminals (exceptions) Brass (flash silver* or nickel** plated)Threaded metal nuts Brass (nickel plated on 0275/7)Other fixings Call factory for details
* R9, 0061, 0062, 0430, 0480, 1090, 1091, 6030, 7030, 8630, 8580** # 3130, 3160, 3161, 3221 have nickel plated terminals with steel screws and platedpolyamide bezel trims
SYMBOLS
TEMPERATURE RATING
FILAMENT LAMPSColoursAvailable with Red, Amber, Green, Clear or Blue lenses.
LEDs - DCColoursRed, Yellow, Green, Blue and White.
VoltageBasic voltage 2.0/2.2V. Some items are available with integral resistors for 12V use.For details of resistors required for higher voltages, please call the factory.
CurrentMaximum continuous forward current 20mA.
Life>100,000hrs
LEDs - ACColoursRed, Yellow, Green, Blue and White.
VoltageRated up to 230V ac, suitable for use at 110V and 230V ac.
Current<3mA
Life>100,000hrs
Terminals Wire leads Solid wires Panel hole size Panel thickness Temperature ratingC 6.3, H 4.8, K 2.8 200mm long Standard LED only
with Terminals with Wire leads
PVC SILICONE
T125°C T125°CT105°C
T65/75°C T65/75°C
0.9
14.0 32.5 1.5 Ø6.7
Ø7.610.24.3
22.6 4.3 Ø7.6
Ø7.64.222.5
Ø7.5
Ø9.0
12.6
3.927.0
Ø9.5
7.912.5 13.7
18.0Ø9.5
11.0
Colours and voltages:
Neon Available with Red, Amber, Green or Clear lenses100/130V (marked 110V), 200/250V (marked 230V)
LED - DC Red, Yellow, Green, Blue, White2.0/2.2V Resistors for other voltages available.
LED - AC Red, Yellow, Green, Blue, White110-230V ac operation.
Filament lamp Available with Red, Amber, Green, Clear or Blue lenses6V, 12/14V, 24/28V.
TYPE DIMENSIONS (mm)
5.8
3.0max
page 66
6.3
6.3max
page 66
6.3
10.0max
page 66
7.1
6.3max
page 66
8.0
0.8-1.6
page 66
8.0
0.8-3.0
page 66
PANEL & ˚C
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
67
(L) 1041 OO Chrome bezel
(L) 1045 OO Chrome bezel available
(L) 0245 OO Chrome bezel available
L 2950 OO Chrome bezel available
(C) 0145 AA
(L) 0195 BB
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: Lens colour,voltage and whether neon, LED or filament lamp
Indicator Lights (Neon, LED and Filament Lamp)
C 6.3
L
W
L
W
L
W
L
L
C 6.3
� Neon, LED, mains LED orfilament lamp
� Bezel sizes from 6.7 to 16.3mmdia
� Red, amber, green and clearlenses
� Red, yellow, green, blue andwhite LEDs
� Wide choice of styles
UL file E63363 CSA file 1279633 / LR29381 �
TERM
�
DC
AC
ILLUMINATIONOPTIONS
DC
AC
DC
AC
DC
AC
DC
DC
AC
RoHS RoHS compliant
Approvals shown for neon versions only
Ø7.5
Ø9.8
3.7
8.527.0
3.027.5
27.5
13.0 9.5 Ø10.0
2.327.5
27.5
13.0 9.5 Ø9.5
32.83.1
Ø12.2
33.5
22.2
8.5max
23.0 12.0
3.019.0
Ø10.0
12.0 Sq.23.5 3.5
23.5
22.3
*Final suffix (X) - Long barrier*Final suffix (Y) - Short barrier*Final suffix (W) - For Wires
*Final suffix (X) - Long barrier*Final suffix (Y) - Short barrier*Final suffix (W) - For Wires
TERM TYPE PANEL & ˚C
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
68
Indicator Lights (Neon, LED and Filament Lamp)
(H) 0568 A(*) Deep lens profile
(VDE at T100)
(VDE at T100)
(H) 0568 B(*) Shallow lens profile
L 2951 OO Chrome bezel available
DIMENSIONS (mm)
(C) 0273 OO
(L) 0569 AW
(C) 0278 OO
L
K 2.8
H 4.8
L
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
L 8.0
0.8-1.6
page 66
8.0
0.8-3.5
page 66
8.0
0.8-3.5
page 66
9.0
2.0 max
page 66
9.0
0.8-2.5
Callfactory
9.0
2.0 max
page 66
L
C 6.3
K 2.8
H 4.8
�
�
�
ILLUMINATIONOPTIONS
DC
AC
DC
DC
DC
AC
Colours and voltages:
Neon Available with Red, Amber, Green or Clear lenses100/130V (marked 110V), 200/250V (marked 230V)
LED - DC Red, Yellow, Green, Blue, White2.0/2.2V Resistors for other voltages available.
LED - AC Red, Yellow, Green, Blue, White110-230V ac operation.
Filament lamp Available with Red, Amber, Green, Clear or Blue lenses6V, 12/14V, 24/28V.
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: Lens colour,voltage and whether neon, LED or filament lamp
� Neon, LED, mains LED orfilament lamp
� Bezel sizes from 6.7 to 16.3mmdia
� Red, amber, green and clearlenses
� Red, yellow, green, blue andwhite LEDs
� Wide choice of styles
DC
AC
UL file E63363 CSA file 1279633 / LR29381 �
RoHS RoHS compliant
Approvals shown for neon versions only
DC
AC
DC
AC
53.73.3
8.3
14.9
32.2
22.2Ø14.6
33.7
4.033.022.2 Ø12.0
32.522.2
16.0
32.7
3.0 Ø13.3
3.5
32.532.0
22.2
16.0
32.7
3.0
Ø13.3
Ø15.6
For sub-panel mounting, behind a facia.
33.7
4.033.022.2 Ø12.0
18.4 16.6 Ø8.8
35.7
22.2
TERM TYPE PANEL & ˚C
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
69
(C) 0277 OO Chrome bezel
(C) 0276 OO
(C) 0275 OO
(C) 0275 OO Chrome bezel
(C) 0276 AA
(C) 0273 LL
DIMENSIONS (mm)
9.5
0.8-2.8
page 66
10.0
12.0 max
page 66
10.0
11.5 max
page 66
10.0
2.8 max
page 66
10.0
12.0 max
page 66
10.0
0.6-2.0
page 66
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
ILLUMINATIONOPTIONS
DC
AC
DC
AC
DC
AC
DC
AC
DC
AC
DC
AC
5.0 22.810.0 Ø13.6
1.825.110.0 15.5 Sq
5.0 22.89.9 Ø13.6
Ø14.522.8 1.6 10.0
Ø18.311.418.0
Ø16.0
Ø15.921.610.5 3.2
TERM TYPE PANEL & ˚C
�
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
(C) 2820 OO
(C) 2821 OO
(C) 0586 OO
70
(C) 2870 OO
L 0081 OO Chrome bezel
(C) 0589 OO
Indicator Lights (Neon, LED and Filament Lamp)
DIMENSIONS (mm)
12.0
0.75-2.0
page 66
12.5
0.8-1.5
page 66
12.0 or 12.7
page 66
12.7
0.75-2.0
page 66
12.7
0.8-1.5
page 66
12.7
9.5
page 66
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
ø12.0= 0.8-2.5ø12.7= 1.1-2.5
ILLUMINATIONOPTIONS
DC
AC
DC
DC
AC
Colours and voltages:
Neon Available with Red, Amber, Green or Clear lenses100/130V (marked 110V), 200/250V (marked 230V)
LED - DC Red, Yellow, Green, Blue, White2.0/2.2V Resistors for other voltages available.
LED - AC Red, Yellow, Green, Blue, White110-230V ac operation.
Filament lamp Available with Red, Amber, Green, Clear or Blue lenses6V, 12/14V, 24/28V.
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: Lens colour,voltage and whether neon, LED or filament lamp
� Neon, LED, mains LED orfilament lamp
� Bezel sizes from 6.7 to 16.3mmdia
� Red, amber, green and clearlenses
� Red, yellow, green, blue andwhite LEDs
� Wide choice of styles
DC
AC
UL file E63363 CSA file 1279633 / LR29381 �
RoHS RoHS compliant
Approvals shown for neon versions only
DC
AC
DC
AC
DC
AC
3.225.410.0 Ø15.9
5.138.1 Ø16.0
5.122.310.4
1.321.3
Ø15.0
5.122.310.4 Ø16.3
Starlock fixing
22.2
14.9
3.38.353.7
32.2
Ø14.6
TERM TYPE PANEL & ˚C
�
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
71
(C) 0579 OO
(C) 0067 OO Chrome bezel
(C) 0180AA
(C) 0180BB Chrome bezel
(C) 0177 OO Chrome bezel
DIMENSIONS (mm)
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
12.7
12.0max
page 66
12.7
1.14max
page 66
12.7
19.0max
page 66
13.5
0.9-1.14
page 66
14.0
2.5max
page 66
ILLUMINATIONOPTIONS
DC
AC
DC
AC
DC
DC
DC
AC
14.6 8.5
8.67.912.5 13.7
18.0
10.7 8.5
14.623.5
30.2
25.1
26.332.3
11.38.0
9.0
3.34.3
11.0
60.0
Ø6.4
Red &Amber
L77
M1068
Redonly
19.09.02.0
8.0
20.018.0
6.0
TERM TYPE PANEL & ˚C
Neon tube, resistor and flexible lead assembly,protected by “shrunk on” transparent sleeving.
�
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
72
L 0195 OO
H 0581 AY
(C) 0196 AA
L 0234 OO
L 0233 OO
Indicator Lights (Neon, LED and Filament Lamp)
DIMENSIONS (mm)
H 4.8
L
L
C 6.3
L
L
2.0-3.5
page 66
18.2/18.3x
6.2/6.3*
0.71-1.62
page 66
9.27/9.50x
4.75*
page 66
13.0x6.5
0.8-3.0
page 66
13.0x6.5
0.8-3.0
page 66
UL file E63363 CSA file 1317844 / 1279633 �
ILLUMINATIONOPTIONS
RoHS RoHS compliant
Colours and voltages:
Neon Available with Red, Amber, Green or Clear lenses100/130V (marked 110V), 200/250V (marked 230V)
LED - DC Red, Yellow, Green, Blue, White2.0/2.2V Resistors for other voltages available.
LED - AC Red, Yellow, Green, Blue, White110-230V ac operation.
Filament lamp Available with Red, Amber, Green, Clear or Blue lenses6V, 12/14V, 24/28V.
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: Lens colour,voltage and whether neon, LED or filament lamp
� Neon, LED, mains LED orfilament lamp
� Bezel sizes from 6.7 to 16.3mmdia
� Red, amber, green and clearlenses
� Red, yellow, green, blue andwhite LEDs
� Wide choice of styles
DC
AC
Approvals shown for neon versions only
H 4.8
H 4.8
TERM TYPE
Indicator Lights (To match 8500, 8600, R13, 1500, 1550, 5500, 6000, 8300 and 7000 switches)
H8580 AB
C0480 A(*)
C7030 AH
C 6.3
T U
K 2.8
C 6.3
T U
H 4.8
K 2.8
C 6.3
H 4.8
DIMENSIONS (mm)
Y
X 21.0
15.0
Body Panel Cut-outCode thickness X Y
B 0.75-1.25 19.1/19.2 12.9/13.01.25-2.0 19.3/19.4 12.9/13.02.0-3.0 19.7/19.8 12.9/13.0
Y
X
Y
X
Body Cut-out Flange*Code Y X Y X
A 12.2/12.3 27.2/27.3 14.0 30.2B 11.0/11.1 30.0/30.1 14.0 33.4L 11.0/11.1 30.0/30.1 14.0 31.9R 14.0/14.1 28.5/28.6 17.0 31.5T 11.5/11.6 28.2/28.3 14.0 30.2
Y
X
Y
X
Body Cut-out Flange*Code Y X Y X
A 22.3/22.4 27.2/27.3 25.0 30.2B 22.1/22.2 30.0/30.1 25.0 33.4L 22.1/22.2 30.0/30.1 25.0 32.0R 23.0/25.4 28.4/28.5 28.9 33.2T 22.3/22.4 28.2/28.3 25.0 30.2
Ø28.0
Body Cut-out FlangeCodeH Ø25.0/25.2 Ø28.0
25.0/25.2
Cut-out FlangeFull product details on pages 10-11
Cut-out FlangeFull product details on pages 16-17 & 20-21
Cut-out FlangeFull product details on pages 26-27
Cut-out FlangeFull product details on pages 40-41
H 4.8 R9 92BCut-out Flange
Full product details on pages 29
Snap fixing in panels thickness up to 3.0
0.9Ø20.2
2.2
Ø23.0
H 4.8
T
X
H8630 FB Cut-out Flange
Y
X 21.0
15.0
Body Panel Cut-outCode thickness X Y
B 0.75-1.25 19.1/19.2 12.9/13.01.25-2.0 19.3/19.4 12.9/13.02.0-3.0 19.7/19.8 12.9/13.0
Full product details on pages 12-13
6030 - L body & C terminals only
Approvals details - contact the factory
C0430 A(*) C6030 AL
73
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: Lens colour,voltage and whether neon or filament lamp.
Colours and voltages:Neon Available with Red, Amber, Green or Clear lenses
100/130V (marked 110V), 200/250V (marked 230V)Filament lamp Available with Red, Amber or Green lenses
6V, 12/14V, 24/28V
� Indicator lights
� Neon or filament lamp
� Bezel sizes from 6.7 to 16.3mmdia
� Red, amber green and clearneons
� Red, amber and green filamentlamps
� Styles to match rocker and pushswitches
UL file E63363 CSA file LR29381
RoHS RoHS compliant
Approvals shown for neon versions only