Technical Data Sheet TDSBB 1006 Ballistic and Blast Glazed … 1006... · 2019-09-30 · 24 830.08...

1

Ballistic and Blast Glazed

Protection Screens

• Designed primarily for commercial,

public areas and military

environments.

• Stainless steel, PPC or anodised

factory applied finishes in a wide

range of RAL colours and finishes

• For internal and external

applications

• Extensive range of testing

• Can be upgraded to offer higher

levels of protection in the future

should current threat levels change

Typical steel and aluminium frame profiles – see accompanying details for further

information

Technical Data Sheet

TDSBB 1006

2

All glazed screens are available with

matching glazed doors. See also:

https://www.blastandballistics.com/d

ocuments/TDSBB%201003%20Ballistic

%20Doorsets%20Glazed%20and%20Ai

rlocks.pdf

Available as Ballistic Doors and Screens

to:

• BS EN1522/23 FB2 – FB7 and

EN1063 BR2 – BR7 Handguns

up to 7.62 Armour Piercing

Ammunition

• NIJ 0108.01 Level 1 – Level IV

• UL752 Level 1 – Level 9

Armour Piercing Ammunition

• EN 356 Attack Glazing

• Also available with ballistic

rated attack polycarbonate

see:

https://www.blastandballistics

.com/products/lexgard-

polycarbonate.php

https://www.blastandballistics.com/documents/TDSBB%201003%20Ballistic%20Doorsets%20Glazed%20and%20Airlocks.pdf




https://www.blastandballistics.com/products/lexgard-polycarbonate.php



3

Bullet Resistant Screens

incorporating:

• Pay Windows

• Cash trays/drawers

• Speech Transfer

• Ballistic resistance to

BS EN1522/23 FB4 –

FB6 and EN1063 BR4-

BR6 and also BS5051

G2/S82 handguns and

shotguns (BS 5051

now superseded by

EN1063)

• Attack ratings to

EN356

• Available stainless

steel, timber and RAL

PPC finishes

Shown left is a 7 counter position cash office reception

recently installed at a large conference centre.

Constructed in stainless steel it is ballistic rated to

EN1063 BR4 (superseding BS 5051 G2/S86) handguns

up to .44 Magnum and also SG1/SG2 shotguns.

Incorporated within the installation is a disabled level 2

position ballistic screen and counter, speech transfer

units, and cash trays with security slide.

The cash transfer trays are suitable in this case for

exposed environments allowing any water ingress to

expel back to the outside. The transaction windows

incorporate a microphone and external speaker at

head height which is shown in the image immediate

left. The large ballistic glazed windows/screens allow

ample light into the office providing a pleasant

environment for staff working in this high security

environment.

‘No Spall’ glazing is required in these cash office

applications as the tellers are seated very close to the

cash window and it is important that they would not be

subjected to any spall from the ballistic glazing. See our

ballistic glass and security glass information for more

details about spall.

Also available is our special Bullet and Attack tested

polycarbonate which offers unparalleled resistance in

applications such as these. See also :

https://www.blastandballistics.com/products/lexgard-

polycarbonate.php



4

Product category classification Variant

Thickness Weight

Family (mm) (kg/m2)

Vetrogard Bullet BR1 S 13 32







Vetrogard Bullet BR2 NS 31 73






Vetrogard Blast ER1 S 10 22




Vetrogard Blast ER1 NS 18 40



Both frames and glazing are tested

together as a system whether for blast

or ballistic applications

A typical ‘All Glass’ product chart showing weights and thicknesses of

products. Lighter weight product solutions are available such as Glass

Polycarbonate – see our Data Sheet TDS1005 for further information

5

Our products are tested to:

• BS EN1522/23 and EN 1063 - FB7/BR7 – 7.62 Armour Piercing Ammunition - Rifles

• BS EN1522/23 and EN 1063 - FB6/BR6 – 7.62 NATO ammunition - Rifles

• BS EN1522/23 and EN 1063 - FB5/BR5 – 5.56 NATO ammunition - Rifles

• BS EN1522/23 and EN 1063 - FB4/BR4 - .44 Magnum Handguns

• BS EN1522/23/1063 - FB3/BR3 – Handguns .44 Handguns

• NIJ 0108.01 IV - 7.62 Armour Piercing Ammunition - Rifles

• NIJ 0108.01 IIIA - .44 and 9mm Ammunition - Handguns

• UL752 Level 9 - 7.62 Armour Piercing Ammunition - Rifles

• UL752 Level 5 - 7.62 Ammunition - Rifles

• UL752 Level 3 - .44 Magnum handguns

• AK47 Kalashnikov Assault Rifles

Also see below our Glazing Data Sheets which cover our glass products tested to BS EN 1063

European Standards

and now independently tested to meet American UL 752 and NIJ 0108.01 standards of ballistic and

bullet protection.

Shot No. Velocity m/s Trauma/Spall Comments Area of Assembly Test

1 861.10 No Spall Level 5 Frame System Pass

2 835.94 No Spall Level 5 Glass Pass



5 N/R No Spall Level 3 Frame System Pass





10 831.46 No Spall FB6 Frame System Pass







17 N/R No Spall FB4 Frame System Pass







24 830.08 No Spall BR7 Glass Pass

25 676.64 No Spall AK47 Frame System Pass

Extract from Test Report No. 10474b Wiltshire Ballistic Services

6

Frame profile

✓ Available as steel profile

✓ Available as aluminium profile

✓ Minimum frame depth 100mm - 150mm

Finishes

✓ Factory applied Polyester Powder Coat

✓ Galvanised

✓ Prime paint finish

✓ Anodised

Available sizes

✓ Minimum 200mm width x 200mm height

✓ No maximum single pane size but suggest < 1.5m2 due to weight

✓ With additional units - indefinite

Glass

✓ Low iron

✓ Tinted

✓ Double glazed units

Glazing thicknesses

✓ Minimum 7.5mm for blast protection

✓ Generally 50mm - 82mm offering blast and also ballistic protection

✓ Maximum single glass pane size 4000mm x 3000mm

Certified Ballistic Standards

✓ BS EN1522/23/1063 - FB7/BR7

✓ BS EN1522/23/1063 - FB6/BR6

✓ BS EN1522/23/1063 - FB5/BR5

✓ BS EN1522/23/1063 - FB4/BR4

✓ BS EN1522/23/1063 - FB3/BR3

✓ NIJ 0108.01 IV

✓ NIJ 0108.01 IIIA and NIJ III

✓ UL752 Level 9

✓ UL752 Level 5

✓ UL752 Level 3

✓ AK47

Blast ratings

✓ Arena testing 100 kg @15m with ballistic protection

✓ Protecting against fragmentation - grenades and pipe bombs

Weights

✓ Frame profiles approx. 8kg/m - 15kg/m

✓ Glass from 32kg/m2 to 196kg/m2

Packing

✓ Supplied in international crates for dispatch

7

Blast Testing – Report extract

Glazing before and after blast testing

8

Rating Ammunition Weight (grains)

Weight (grams)

Min fps

Max fps

Number of Shots

Level 1 9mm Full Metal Copper Jacket with Lead Core 124 8.0 1175 1293 3

Level 2 .357 Magnum Jacketed Lead Soft Point 158 10.2 1250 1375 3

Level 3 .44 Magnum Lead Semi-Wadcutter Gas Checked 240 15.6 1350 1485 3

Level 4 .30 Caliber Rifle Lead Core Soft Point (.30-06 Caliber)

180 11.7 2540 2794 1

Level 5 7.62mm Rifle Lead Core Full Metal Copper Jacket Military Ball (.308 Caliber)

150 9.7 2750 3025 1

Level 6 9mm Full Metal Copper Jacket with Lead Core 124 8.0 1400 1540 5

Level 7 5.56mm Rifle Full Metal Copper Jacket with Lead Core (.223 Caliber)

55 3.56 3080 3383 5

Level 8 7.62mm Rifle Lead Core Full Metal Copper Jacket Military Ball (.308 Caliber)

150 9.7 2750 3025 5

Level 9 30-06 Caliber Rifle, Steel Core, Lead Point Filler, FMJ (APM2)

166 10.8 2715 2987 1

Level 10 .50 Caliber Rifle, Lead Core FMCJ Military Ball (M2)

709.5 45.9 2810 3091 1

Shotgun 12-Gauge Rifled Lead Slug 12-Guage 00 Buckshot (12 pellets)

1oz 1.5oz

28.3 42

1585 1200

1744 1320

3 3

Ballistic charts showing the relationship between weapons and ammunition

Above: BS EN 1522/23 and BS EN1063

Below: UL 752 comparisons

9

Screens and glazing systems are

extensively tested against a wide range of

both ballistic and blast threats producing a

cost effective product and solution for all

applications

Ballistic test report extract – see data table

for comprehensive performance

specifications

Technical Data Sheet TDSBB 1006 Ballistic and Blast Glazed … 1006... · 2019-09-30 · 24 830.08...

Documents

Transcript of Technical Data Sheet TDSBB 1006 Ballistic and Blast Glazed … 1006... · 2019-09-30 · 24 830.08...