technical data sheet - Queensland Forklifts
4
FT104EN_B_1014_MHT_MHT-X790 www.manitou.com TECHNICAL DATA SHEET
Transcript of technical data sheet - Queensland Forklifts
FT104EN_B_1014_MHT_MHT-X790 www.manitou.com
technical data sheet
FT104EN_B_1014_MHT_MHT-X790.indd 1 15/10/14 17:03
FT104EN_B_1014_MHT_MHT-X790
This brochure describes versions and configuration options for MANITOU products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. MANITOU reservesthe right to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your MANITOU dealer. Non-contractual document. Product descriptionsmay differ from actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of MANITOU and may not be used without authorisation. All rights reserved. The photos and diagrams contained in thisbrochure are provided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes
MHT 790 MHT-X 790
LiftingMax. capacity at 600 mm LC 9 000 kgMax. lifting height 6.84 mMax. outreach 3.72 mUnladen timeLifting 9.2 sLowering 7.8 sExtension 6.6 sRetraction 6.1 sTyres 445/65 R22.5BrakingService brake Multiple-disc brake with oil bath on front and rear axlesParking brake Automatic negative parking brake
Engine John Deere Stage IIIb(Interim Tier IV)
John Deere Stage IIIa
Type 4045PWX 4045 PWXDisplacement 4.5 lPower 141 HP / 104 kW 137 HP / 102 kWMax. torque 534 Nm / 1500 rpm 545 Nm / 1500 rpmInjection DirectLaden drawbar pull 10905 daNGradeability (laden) 48%Transmission HydrostaticReversing shift electrohydraulic controlNumber of gears (forward/reverse) 2/2Max. travel speed(may vary according to applicable regulations)
30 kph
Axle DANA
Steering mode
4 Wheel Steer - 3 steering modes
Controls JSM® Joystick multi-function - Load limiter cut off system - EN 15000 NormHydraulics Axial piston variable displacement pump (LS)Load Sensing Pump 180 l/min - 270 barCapacitiesHydraulic oil 151 lFuel 150 lUnladen weight (with forks) 13 020 kgDimensionsOverall length to carriage 5.27 mGround clearance 0.41 mOverall width 2.47 mOverall height 2.48 mStandard forks(length x width x thickness)
1200 x 200 x 60 mm
Turning radius over tyres (V2) 4.88 mCarriage Rotation (crowd / dump) 137°Noise and vibrationNoise at driving position (LpA) 79.7 dBEnvironmental noise (LwA) 103 dBVibration to whole hand/arm <2.5 m/s2
FT104EN_B_1014_MHT_MHT-X790.indd 2 15/10/14 17:03
FT104EN_B_1014_MHT_MHT-X790
This brochure describes versions and configuration options for MANITOU products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. MANITOU reservesthe right to change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your MANITOU dealer. Non-contractual document. Product descriptionsmay differ from actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of MANITOU and may not be used without authorisation. All rights reserved. The photos and diagrams contained in thisbrochure are provided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes
8
7
6
5
4
3
2
1
0m5 4 3 2 1 0m
3.723.37
2.852.34 1.30
1.80
6.84
0°
10°
20°
30°
40°
50°
60°62°
3500
KG42
00KG
5000
KG60
00KG 8000
KG 9000
KG
Industrial Load ChartEN 1459 Annex A
Machine on tyres with forksCDG 600 mm
Rough Terrain Load ChartEN 1459 Annex B
8
7
6
5
4
3
2
1
0m5 4 3 2 1 0m
3.723.37
2.852.34 1.30
1.82
6.84
0°
10°
20°
30°
40°
50°
60°62°
3500
KG42
00KG
5000
KG60
00KG
7500
KG90
00KG
FW
J
BD
E
C
YZ
A
L
U1 U2
P3
P2
I
C1
D1
G1
S
V1
T
V2
R
V
O
mm MHT/MHT-X 790A 1200B 2870C 1128C1 997D 5273D1 5142E 6473F 2020G1 409I 1275J 884L 60O 200P2 38°P3 26°R 4801S 8647T 3481U1 2478U2 2657V 5592V1 2110V2 4884W 2473Y 12°Z 125°
FT104EN_B_1014_MHT_MHT-X790.indd 3 15/10/14 17:03
Head office:B.P. 249 - 430 rue de l’Aubinière - 44158 Ancenis Cedex - France
Tel: 00 33 (0)2 40 09 10 11 - Fax: 00 33 (0)2 40 09 10 97www.manitou.com
Your nearest MANITOU dealer:
FT104EN_B_1014_MHT_MHT-X790
FT104EN_B_1014_MHT_MHT-X790.indd 4 15/10/14 17:03
