1296 South Service Road West, Oakville, ON L6L 5T7 Tel: (905) 825-2252 Fax: (905) 825-2272 Page 1 of 24

Technical Bulletin No. 89 – 10 – 2006

Marquis on Plywood Details Enclosed are typical details for the Marquis panel on plywood. They have been drawn to give general guidance with regard to arrangement of components based on our current recommendations. Please note that the details should be checked for applicability and modified if required to suit a specific project condition. Project details for construction will also require additional data. This would typically include as a minimum the addition of information covering component sizes and spacings, material thicknesses as well as fastener types, quantities and/or spacings. AutoCAD files are available upon request.

TABLE of CONTENTS

DETAIL Eave Detail (Sliding End Connection) 1.0 Eave Detail (Fixed End Connection) 1.1 Eave Detail (Sliding End Connection) 1.2 Eave Detail (Fixed End Connection) 1.3 Eave Detail 1.4 Mid Section Detail 2.0 End Lap Detail 3.0 Ridge Detail (Fixed End Connection) 4.0 Ridge Detail (Sliding End Connection) 4.1 Gable Detail (Fixed End Connection) 5.0 Gable Detail (Sliding End Connection) 5.1 Gable Detail (Sliding End Connection) 5.2 Isometric Top and Bottom End Panel Detail 6.0 Roof Large Penetration Plan View 7.0 Longitudinal Section Detail 7.1 Cross Section Detail 7.2 Roof Large Penetration – Isometric 7.3

i

Installation Sequence of Spring to Clip 8.0 Installation Sequence for Marquis Panel 9.0 Isometric 2” Marquis Thermal Clip Detail 10.0

ii