Technical Application Guide for UP-SHINE LED Downlight · 2017-11-07 · Introduction Up-shine SMD...
Transcript of Technical Application Guide for UP-SHINE LED Downlight · 2017-11-07 · Introduction Up-shine SMD...
Technical ApplicationGuide for UP-SHINELED DownlightUP-DL54B-8-20W-P3
Introduction Up-shine SMD LED Down light adopts high lumen SMD LED, PC diffuser with even light output. Plastic coated aluminum housing with internal driver design; it is our most economical and practical downlight version. Dimmable driver shares great popularity by the excellent dimming effect.
● Up to 70% energy saving compared to standard CFL● Long lifetime of 40,000 hours ● Dimmable when using triac dimmer● 90° wide beam angle●200-210mm cutout● CCT: 3000K / 4000K / 5700K● No UV/IR light● Environment friendly, without Mercury or any other hazardous substances
Application notes● IP54 only for the LED cover, IP40 for other part● Professional electrician for installation only ● Switch off before installation● Do not touch when in use● Keep away from hot steam and corrosive gas
Application AreasIt is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc.
Certificate
www.upshine.com [email protected]
Slide switch for color selection
Product Information
Fixture CompatibilityRated
WattageElectrical
ClassificationIngress
Protection Operating
TempOperatingHumidity
Storage Temp
20W Ⅱ IP40 / IP54 -20oC~45oC 0~90% -20oC~65oC
Ø225
Ø17
3.8
84
www.upshine.com [email protected]
Technical Specifications
Model Voltage Power PowerFactor
Lumen(±5%) CCT Beam
angle Lifespan CRI Dimmable Dimension
UP-DL54-8-20W-P3 AC230V 20W 0.9
1800 3000K
90o 40000h ≥80 Yes Ø225*84mm cutout 200-210mm2100 4000K
1930 5700K
Driver data SheetDriver data DIM
Input rated Voltage AC230V
Frequency 50Hz
Input Voltage AC220-240V
Efficiency ≥85%
Total load Wattage 20W±5%
Power Factor 0.9
Rated input current ≤0.11A
Full load output Voltage 65-78V
Rated output current 240mA
Output current range 240mA±5%
Power tolerance ±5%
Current output tolerance ±5%
Dimming range 8%-100%
Dimmer Triac dimmers
Short circuit protection PASS
Over voltage protection PASS
Over temperature protection PASS
Withstand voltage —
Photometric Diagram
Spectral Distribution
3000K
380 500 600 700 800Wavelength(nm)
Max=6744 [1.0=20000]
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
4000K
5700K
380 500 600 700 800
380 500 600 700 800
Wavelength(nm)
Wavelength(nm)
Max=6672 [1.0=20000]
Max=8619 [1.0=20000]Sp
ectr
um
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
Spec
trum
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0.97 SDCM F3000K
x=0.4646 y=0.4204
4.69 SDCM F4000K
x=0.3869 y=0.3790
5.76 SDCM F5700K
x=0.3347 y=0.3514
3000K
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 105.1 DEG
-/+180
-120
-90
-30
120
90
30
0
150
300
450
600
750
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)7.50
6.75
6.00
5.25
4.50
3.75
3.00
2.25
1.50
0.75
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25
Flux out: 1299 lm
Height Eavg, Emax Angle: 104.36deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
4000K
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 105.3 DEG
-/+180
-120
-90
-30
120
90
30
0
160
320
480
640
800
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)8.0
7.2
6.4
5.6
4.8
4.0
3.2
2.4
1.6
0.8
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25 Height Eavg, Emax Angle: 105.17 deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 1457 lm
5700K
Polar intensity diagram Beam diagramCartesian intensity diagram
UNIT: cdAVERAGE BEAM ANGLE(50%): 105.3 DEG
-/+180
-120
-90
-30
120
90
30
0
150
300
450
600
750
0
Planar Illuminance Curve
Distance(m)
MH=10mE(LX)7.50
6.75
6.00
5.25
4.50
3.75
3.00
2.25
1.50
0.75
0
C0/180C90/270
-25 -20 -15 -10 -5 0 5 10 15 20 25 Height Eavg, Emax Angle: 105.05deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.
Flux out: 1359 lm
www.upshine.com [email protected]
90
80
70
60
50
40
30
20
10
0
11:1
3:13
11:2
5:10
11:3
7:10
11:4
9:10
12:0
1:10
12:1
3:10
12:2
5:10
12:3
7:10
12:4
9:10
13:0
1:10
13:1
3:10
13:2
5:10
13:3
7:10
13:4
9:10
14:0
1:10
14:1
3:10
14:2
5:10
14:3
7:10
14:4
9:10
15:0
1:10
15:1
3:10
15:2
5:10
15:3
7:10
15:4
9:10
16:0
1:10
16:1
3:10
16:2
5:10
16:3
7:10
IC
Capacitor
MOS
PCB
LED
Fitting
Environmental temperature
Tem
pera
ture
(o C)
Time
The driver lifespan is based on capacitor working temperature.
Driver lifetime & LED light decay rate
90000
80000
70000
60000
50000
40000
30000
20000
10000
065oC 75oC 85oC 95oC 105oC
Life
time
(hou
rs)
Capacitor Tc (oC)
Driver Lifetime
% L
umin
ous
Flux
FLUX
△ U'V'
110%
105%
100%
95%
90%
85%
80%
75%
70%
0.0040
0.0035
0.0030
0.0025
0.0020
0.0015
0.0010
0.0005
0.00000 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000
LifeTime (hours)
Polar Diagram Comparison
AVERAGE BEAM ANGLE (50%): 105.3DEG
UNIT: cd
C0/180, 105.3 deg
C30/210, 105.3 deg
C60/240, 105.2 deg
C90/270, 105.2 deg
150
300
450
600
750
0O
180O
150O-150O
120O-120O
90O-90O
60O-60O
30O-30O
0
LED Light Decay Rate
Temperature● The testing is operated at 25°C
● The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C
● The highest withstand temperature of IC, MOS could be 120°C
● The highest withstand temperature of LED junction temperature is 150°C
www.upshine.com [email protected]
Packaging Information
SIZE(CM) N.W/pc(KGS) G.W.(KGS) Q'TY(PCS)
Carton 48*48*49 0.635 14 20
CTNS Q'TY(PCS) VOLUME(CBM)
20'' standardcontainer 245 4900 28
40'' standardcontainer 490 8900 56
www.upshine.com [email protected] Phone: +86 755 2919 7332Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China
Installation
1 2
3 4
Ceiling Opening
A. Hold back spring clips
B. Push downlight into position
Ceiling
Spring Clips
Loosen the screw and take off the cover, connect the wire to the wring terminals, put the cover back and tighten the screw.