TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in...
-
date post
22-Dec-2015 -
Category
Documents
-
view
215 -
download
0
Transcript of TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in...
![Page 1: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/1.jpg)
TECH 101
Product Design and Manufacturing
![Page 2: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/2.jpg)
TECH 101 2
System Life-Cycle Engineering
• 2 Major phases in almost all products and in many cases services– Acquisition phase
• Need identification• Conceptual design• Detail design• Production or construction
– Utilization phase• Usage, maintenance, phase out, & disposal.
Figures 2.1 & 2.2
![Page 3: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/3.jpg)
TECH 101 3
![Page 4: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/4.jpg)
TECH 101 4
![Page 5: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/5.jpg)
TECH 101 5
![Page 6: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/6.jpg)
TECH 101 6
Steps in Product or Service Development
• Identification of Needs
• Accomplishment of Feasibility Study
• Advance System Planning
• System Requirements Analysis
• Technical Performance Measures (TPMs)
![Page 7: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/7.jpg)
TECH 101 7
Steps in Product or Service Development continued . . .
• Functional Analysis and Allocation
• Synthesis, Analysis and allocation
• Synthesis, Analysis and Evaluation
• System Specification
• Conceptual Design Review
![Page 8: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/8.jpg)
TECH 101 8
Identification of Need
• Identification of need is the 1st. Step in the conceptual design.– The need or want or desire may be for a new
or improvement of a product or a process. It is based on a real or perceived deficiency. Examples: cost, speed, availability, quality, reliability. The deficiency must be well defined.
• Biases and political factors
![Page 9: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/9.jpg)
TECH 101 9
Feasibility Analysis
• After the needs are identified, alternatives for achieving the objectives must be developed and evaluated for technological, economical, and financial feasibility. Major decisions are made at this early stage.
![Page 10: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/10.jpg)
TECH 101 10
Advance System Planning
• Given the need and a feasible system to fulfill it, the advance planning commences. Figs. 3.1-3.2. In preparing the specifications, it must be stated in terms of “whats and not “hows” unless necessary.
![Page 11: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/11.jpg)
TECH 101 11
![Page 12: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/12.jpg)
TECH 101 12
![Page 13: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/13.jpg)
TECH 101 13
Systems Requirements Analysis
• Definition of Operational Requirements
• Operational distribution or deployment - includes geographical distribution & schedule of deployment Fig. 3.3
• Mission profile or scenario - identification of primary mission, and its secondary or alternative mission, etc. Fig. 3.4
![Page 14: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/14.jpg)
TECH 101 14
![Page 15: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/15.jpg)
TECH 101 15
![Page 16: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/16.jpg)
TECH 101 16
Systems Requirements Analysis continued
• Performance and related parameters - definition of basic requirements, speed, altitude, range, accuracy, throughput, capacity, etc.
• Utilization requirements - how often and how much the system is used per shift, per period, for its life cycle.
![Page 17: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/17.jpg)
TECH 101 17
Systems Requirements Analysis continued
• Effectiveness requirements - MTBF, MTBM, MTTR, , and MDT
• Operational life cycle (horizon)
• Environment - definition of the environment where the system will be used. In short, answer the following:
• What function(s), & when will be per-formed, where will it be used, and how will it accomplish its objectives
![Page 18: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/18.jpg)
TECH 101 18
Maintenance and Support Requirements
• The performance of the mission is the most important.
• Maintenance and its major levels are also important. Fig. 3.5
• Levels of maintenance - on what part of the system and where the repair is performed
• Sys. maintenance & repair policy
![Page 19: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/19.jpg)
TECH 101 19
![Page 20: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/20.jpg)
TECH 101 20
Maintenance and Support Requirements continued
• Organizational responsibilities - who is responsible for the maintenance?
• Logistic support elements - includes spare parts, test equipment, personnel, moving & transportation equipment, etc.
• Effectiveness requirements - support capability
• Environment - temperature, humidity, dust, vibration, arctic or tropical, etc.
![Page 21: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/21.jpg)
TECH 101 21
Functional Analysis & Allocation
• Functional analysis is the process of translating systems requirements into detailed design criteria. The steps are:– Abstraction of the needs of the customer– Translate the above to hardware, software,
facilities, etc.
![Page 22: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/22.jpg)
TECH 101 22
Functional Analysis & Allocation continued
• In the analysis phase, “what” customer’s needs are specified and not how they are going to be achieved.
• Functional analysis is iterative. It breaks down the requirements and allocates it to subsystems at various hierarchy. The result is a definition of the system in functional terms, design function, production function, etc.
![Page 23: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/23.jpg)
TECH 101 23
Functional Analysis & Allocation continued
• Functional Flow Block Diagram can be used for system functional breakdown.
• Functional allocation is used to group similar functions into some logical subdivision.
• Coordination and Integration of activities must initiated at an early stage.
![Page 24: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/24.jpg)
TECH 101 24
Synthesis, Analysis, & Evaluation
• Trade-off in designs, technologies, materials, packaging, make or buy, etc., are made during the life cycle of the project.
• The trade-off analysis leads synthesis, i.e., combining components that gives a feasible system configuration. In each step of the way, evaluation
![Page 25: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/25.jpg)
TECH 101 25
Systems Specification
• The technical requirements & elements have to be documented. The content of the specification document for type A (top level) system is shown in Fig. 3.16.
• Type A( Systems Specification): Technical, performance, operational, & support characteristics of the overall system.
![Page 26: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/26.jpg)
TECH 101 26
![Page 27: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/27.jpg)
TECH 101 27
Systems Specification continued
• Type B ( Development spec.): Development spec., it includes the requirements for any subsystem level. R&D , equipment, & processes are specified along with their performance, effectiveness, etc.
• Type C ( Product spec.): The same as above, except they are available or can easily be procured.
![Page 28: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/28.jpg)
TECH 101 28
Systems Specification continued
• Type D(Process Spec.): This includes any service or process that must be performed on any component of the system, such as machining, welding, heat treating, etc.
• Type E (Material Spec.): Tech. Requirements for the raw material, paints, chemicals, etc.
![Page 29: TECH 101 Product Design and Manufacturing. TECH 1012 System Life-Cycle Engineering 2 Major phases in almost all products and in many cases services –Acquisition.](https://reader035.fdocuments.in/reader035/viewer/2022062516/56649d785503460f94a5aa07/html5/thumbnails/29.jpg)
TECH 101 29
Conceptual Design Review
• It is a formalized check
• Provides a baseline for all project personnel
• Provides a forum for concurrent engineering
• Interface problems are addressed
• Provides a formalized record of design decisions & helps the design to mature