TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake...
Transcript of TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake...
![Page 1: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/1.jpg)
©2004 Tripod Data Systems, Inc.
Tripod Data Systems, Inc. Raw Data Record Specification
Survey Pro™ Version 4.0
June 3, 2004
Table of Changes Change Date By Fixed
• enum definitions for AO (Azimuth Orientation) and GO (Grid Orientation) fields (of CG record)
• enum definition for TP (Projection Type) field (of PJ/PE records) • enum definition for CT (Origin Center) and AF (Azimuth Format) fields
(of PE record) • enum definition of DA (Datum Type) field (of DT record)
November 15, 2002 GB
Fixed • Offset length changed to Offset Angle Right in the OF Record
Feb. 11, 2003 AH
Added • Stake DTM with a centerline will output offset cut sheet data (starting with
SP 3.8)
August 26, 2003 KAM
Added • Note in the BL record clarifying measure point for GPS baselines (APC).
November 18, 2003 AH
Update for Survey Pro 4.0 • Added - Leveling Records • Added - Point Slope Staking Records
May 12, 2004 GB
Additional SP4.0 Changes • Added optional units field to the attribute (AT) record
June 3, 2004 KAM
![Page 2: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/2.jpg)
Raw Data Record Specification
2
Table of Contents Records and Fields............................................................................................................... 4 General Raw Data Records................................................................................................. 5 Conventional Raw Data Records........................................................................................ 5 GPS Raw Data Records....................................................................................................... 5 Leveling Records.................................................................................................................. 6 Legacy Raw Data Records .................................................................................................. 6 General Raw Data Record Definitions............................................................................... 7
1. -- - Note Record ............................................................................................................... 7 2. JB - Job Record................................................................................................................ 7 3. MO - Mode Setup Record................................................................................................ 7
Conventional Raw Data Record Definitions...................................................................... 7 4. AP - Adjusted point record .............................................................................................. 7 5. AT – Attributes ................................................................................................................ 8 6. BK - Backsight Record .................................................................................................... 8 7. CF - Cut Sheet Record ..................................................................................................... 8 8. DE - Design point / location record ................................................................................. 9 9. DL - Define a Location Record ....................................................................................... 9 10. DP - Deleted point record ............................................................................................ 9 11. FC – Feature Code ....................................................................................................... 9 12. LS - Line of Sight Record............................................................................................ 9 13. MD – Multiple Distance ............................................................................................ 10 14. OC - Occupy Point Record ........................................................................................ 10 15. OE - Offset delta record............................................................................................. 10 16. OF - Off Center Shot Record ..................................................................................... 10 17. RB – Repeat Backsight .............................................................................................. 11 18. RD – Repeat Directional............................................................................................ 11 19. RE - Remote Elevation Record.................................................................................. 11 20. RF – Repeat Foresight ............................................................................................... 12 21. RS - Resection Record ............................................................................................... 12 22. SD - Deltas record...................................................................................................... 12 23. SK - Stake Out Record............................................................................................... 12 24. SL - Slope Staking Record......................................................................................... 13 25. SP - Store Point Record ............................................................................................. 13 26. SR - Slope Staking Reference Offset Record ............................................................ 13 27. SU - Sun Shot Record................................................................................................ 14 28. TR/SS/OB - Traverse / Sideshot / Observation Record............................................. 14 29. PL – Point Slope Stake Record.................................................................................. 15 30. PR – Point Slope Stake Reference Offset Record ..................................................... 15
GPS Raw Data Record Definitions................................................................................... 16 31. AH - GPS Antenna Height......................................................................................... 16 32. BL - GPS Base Line................................................................................................... 16 33. BP - Set Base Receiver Position ................................................................................ 16 34. CG – COGO Settings record...................................................................................... 17 35. CS - Coordinate System Identity ............................................................................... 17
![Page 3: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/3.jpg)
Raw Data Record Specification
3
36. CT - Calibration Point................................................................................................ 17 37. CV - RMS Covariance of GPS Position .................................................................... 17 38. DG - Datum Grid Record........................................................................................... 18 39. DT - Datum Record ................................................................................................... 18 40. EE - GPS Edit Point Record ...................................................................................... 18 41. EP - Geodetic position ............................................................................................... 18 42. EQ - Equipment Record............................................................................................. 19 43. ES - Ellipsoid Record................................................................................................. 19 44. GK - GPS stakeout record.......................................................................................... 19 45. GO - GPS Offset Shot Record ................................................................................... 19 46. GP - GPS Point Record.............................................................................................. 20 47. GR – GPS adjusted point record................................................................................ 20 48. GS - GPS Store Point................................................................................................. 20 49. HA - Horizontal Calibration (Adjust) ........................................................................ 20 50. PE - Extended Projection Record .............................................................................. 21 51. PJ - Projection Record ............................................................................................... 21 52. RP – Local coordinates of calibration point .............................................................. 21 53. RX - Receiver Setup .................................................................................................. 22 54. ST - Local site settings............................................................................................... 22 55. VA - Vertical Calibration (Adjust) ............................................................................ 22
Leveling Raw Data Record Definitions............................................................................ 23 56. LL –Level Open Loop Record................................................................................... 23 57. LB – Level Raw Observation Record (backsight or foresight) ................................. 23 58. LF – Level Reduced Observation Record (backsight or foresight) ........................... 24 59. LP – Level 2 Peg Test Results Record....................................................................... 24 60. LC – Level Close Loop Record ................................................................................. 24
Legacy Raw Data Record Definitions .............................................................................. 25 61. AA – Accumulating Angle-right ............................................................................... 25 62. BB - Bench level, backsight....................................................................................... 25 63. BG - Base Point Geoid Model Elevation................................................................... 25 64. BS - Bench level, side shots....................................................................................... 25 65. BT - Bench level, traverse ......................................................................................... 26 66. HC - Horizontal Control Point................................................................................... 26 67. LE - Vertical Ellipsoid Height Setup ......................................................................... 26 68. LG - Vertical Geoid Model Setup.............................................................................. 26 69. LM - Horizontal Mapping Plane Setup...................................................................... 27 70. LH - Local transforming coefficients for horizontal.................................................. 27 71. LV - Local transforming coefficients for vertical...................................................... 27 72. VC - Vertical Control point ....................................................................................... 28
General and Conventional Field List ............................................................................... 29 Leveling Field List.............................................................................................................. 31 GPS Field List .................................................................................................................... 31 Legacy Field List ................................................................................................................ 36
![Page 4: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/4.jpg)
Raw Data Record Specification
4
Records and Fields General Record Description: Notes:
- Raw data records are comma delimited and in ASCII text format. - In the Record Definitions, an (ENUM) after a field name means this field is an
enumeration type field (i.e. 0 = blue, 1 = red, etc.). These fields are described in the Field Lists section.
- Field data types are also described in the Field Lists sections. - Under the Description column in Field Lists, (See MO for units) refers to the actual “3.
Mode Setup Record” of the corresponding raw file.
Record Type Field Data (%s = String Format)
"AH,DC%s,MA%s,ME%s,RA%s"
Field Types
![Page 5: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/5.jpg)
Raw Data Record Specification
5
General Raw Data Records 1. -- - Note record 2. JB - Job Record 3. MO - Mode Setup Record
Conventional Raw Data Records
4. AP - Adjusted point record 5. AT - Attributes 6. BK - Backsight Record 7. CF - Cut Sheet Record 8. DE - Design point / location record 9. DL - Define a Location Record 10. DP - Deleted point record 11. FC - Feature Code 12. LS - Line of Sight Record 13. MD - Multiple Distances Record 14. OC - Occupy Point Record 15. OE - Offset delta record 16. OF - Off Center Shot Record 17. RB - Repeat Backsight 18. RD - Repeat Directional 19. RE - Remote Elevation Record 20. RF - Repeat Foresight 21. RS - Resection Record 22. SD - Deltas record 23. SK - Stake Out Record 24. SL - Slope Staking Record 25. SP - Store Point Record 26. SR - Slope Staking Reference Offset Record 27. SU - Sun Shot Record 28. TR/SS/OB - Traverse / Sideshot / Observation Record 29. PL – Point Slope Stake Record 30. PR – Point Slope Stake Offset Record
GPS Raw Data Records
31. AH - GPS Antenna Height 32. BL - GPS Base Line 33. BP - Set Base Receiver Position 34. CG - COGO settings record 35. CS - Coordinate System Identity 36. CT - Calibration Point 37. CV - RMS Covariance of GPS Base Line 38. DG - Datum Grid Record 39. DT - Datum Record 40. EE - GPS Edit Point Record 41. EP - Geodetic position
![Page 6: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/6.jpg)
Raw Data Record Specification
6
42. EQ - Equipment Record 43. ES - Ellipsoid Record 44. GK - GPS stakeout record 45. GO - GPS Offset Shot Record 46. GP - GPS Point Record 47. GR - GPS adjusted point record 48. GS - GPS Store Point 49. HA - Horizontal Calibration (Adjust) 50. PE - Extended Projection Record 51. PJ - Projection Record 52. RP - Local coordinates of calibration point 53. RX - Receiver Setup 54. ST - Local site settings 55. VA - Vertical Calibration (Adjust)
Leveling Records 56. LL –Level Open Loop Record 57. LB – Level Raw Observation Record 58. LF – Level Reduced Observation Record 59. LP – Level 2 Peg Test Results Record 60. LC – Level Close Loop Record
Legacy Raw Data Records (Not used in Survey Pro 3.5 and beyond)
61. AA - Accumulating Angle-right (not used in SPCE) 62. BB - Bench level, backsight (not used in SPCE) 63. BG - Base Point Geoid Model Elevation (no longer supported in SPCE 3.5, replaced by
VA record) 64. BS - Bench level, side shots (not used in SPCE) 65. BT - Bench level, traverse (not used in SPCE) 66. HC - Horizontal Control Point (not supported in SPro 3.5, replaced with CT) 67. LE - Vertical Ellipsoid Height Setup 68. LG - Vertical Geoid Model Setup (no longer supported in SPCE3.5) 69. LM - Horizontal Mapping Plane Setup (no longer supported in SPCE3.5) 70. LH - Local transforming coefficients for horizontal (no longer supported in SPCE3.5
and replaced by Horizontal adjustment record HA) 71. LV - Local transforming coefficients for vertical (no longer supported in SPCE3.5 and
replaced by Vertical adjustment record VA) 72. VC - Vertical Control point (not supported in SPro 3.5, replaced with CT)
![Page 7: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/7.jpg)
Raw Data Record Specification
7
General Raw Data Record Definitions 1. -- - Note Record 2. JB - Job Record
Record type: JB Field headers: NM: Job name DT: Date TM: Time “JB,NM%s,DT%s,TM%s”
3. MO - Mode Setup Record
The mode setup will be recorded at the beginning of the raw data file and whenever it is changed. Record type: MO Field headers: AD: Azimuth direction (ENUM) UN: Distance unit (ENUM) SF: Scale factor EC: Earth curvature (ENUM) EO: EDM offset (inch) (Default string “0.0”) AU: Angle unit (ENUM) “MO,AD%s,UN%s,SF%s,EC%s,EO0.0,AU%s”
Conventional Raw Data Record Definitions 4. AP - Adjusted point record
Record type: AP Field headers: PN: Point name N : Adjusted northing E : Adjusted easting EL: Adjusted elevation --: Description “AP,PN%s,N %s,E %s,EL%s,--%s”
![Page 8: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/8.jpg)
Raw Data Record Specification
8
5. AT – Attributes Record type: AT Field headers: TN: Attribute name TV: Attribute value in string form TU: Attribute units in string form // optional “AT,TN%s,TV%s” “AT,TN%s,TV%s,TU%s”
6. BK - Backsight Record
Record type: BK Field headers: OP: Occupy point BP: Back point BS: Backsight BC: Back circle “BK,OP%s,BP%s,BS%s,BC%s”
7. CF - Cut Sheet Record Record type: CF (cut or fill) For an offset stakeout cut sheet ST: Station OD: Offset direction (ENUM) OL: Offset length EL: Elevation GD: Grade (design) “CF,ST%s,OD%s,OL%s,EL%s,GD%s” For a point stakeout cut sheet PN: Point number EL: Elevation GD: Grade “CF,PN%s,EL%s,GD%s” Note: From Survey Pro CE 3.5, the PN field and description field are removed from CF record for point stake out.
![Page 9: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/9.jpg)
Raw Data Record Specification
9
8. DE - Design point / location record Record type: DE Field headers: PN: Point name (design point, may be blank) N : Northing E : Easting EL: Elevation --: Description (design point description, may be blank) “DE,PN%s,N %s,E %s,EL%s,--%s”
9. DL - Define a Location Record
Record type: DL Field headers: PN: Point name (POB) HD: Relative horizontal distance VD: Relative vertical distance AZ: Azimuth --: Description of the stored point.
“DL,PN%s,HD%s,VD%s,AZ%s,--%s”
10. DP - Deleted point record
Record type: DP Field headers: PN: Point name “DP,PN%s”
11. FC – Feature Code
Record type: FC Field headers: PN: Point name FN: Feature code name (may be blank) “FC,PN%s,FN%s”
12. LS - Line of Sight Record Record type: LS Field headers: HI: Height of instrument HR: Height of rod “LS,HI%s,HR%s”
![Page 10: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/10.jpg)
Raw Data Record Specification
10
13. MD – Multiple Distance Record type: MD Field headers: SD: Slope distance “MD,SD %s:%s”
14. OC - Occupy Point Record
Record type: OC Field headers: OP: Point number N : Northing (the header is N space) E : Easting (the header is E space) EL: Elevation --: Description “OC,OP%s,N %s,E %s,EL%s,--%s”
15. OE - Offset delta record
Record type: OE Field headers: ST: Station OE: Offset delta (actual offset – design offset) “OE,ST%s,OE%s”
16. OF - Off Center Shot Record
Record type: OF Field headers: AR: Angle right ZE: Zenith SD: Slope distance OL: Offset-angle right HD: Horizontal distance VD: Vertical distance LR: Left/Right Offset “OF,AR%s,ZE%s,SD%s” “OF,ZE%s,--Vert Angle Offset” “OF,OL%s,--Right Angle Offset” “OF,HD%s,--Horizontal Distance Offset” “OF,LR%s,--Left / Right Offset” “OF,VD%s,--Elevation Offset”
![Page 11: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/11.jpg)
Raw Data Record Specification
11
17. RB – Repeat Backsight Record type: RB (repeat backsight) Field headers: OP: Occupied point BP: Backsight point AR: Angle right ZE: Zenith angle SD: Slope distance HR: Height of rod at the backsight --: Description “RB,OP%s,BP%s,AR%s,ZE%s,SD%s,HR%s,--%s”
18. RD – Repeat Directional
Record type: RD Field headers: BD: Backsight direct FD: Foresight direct ZD: Zenith direct FV: Foresight reverse ZV: Zenith reverse BV: Backsight reverse “RD,FD %s:%s” “RD,FV %s:%s” “RD,BD %s:%s” “RD,BV %s:%s” “RD,ZD %s:%s” “RD,ZV %s:%s” //The data before the colon (:) is the integer set number and the data after the colon is the angle measurement. See MO record for angle units.
19. RE - Remote Elevation Record
Record type: RE Field headers: OP: Occupied point FE: Foresight elevation ZE: Zenith angle SD: Slope distance --: ( always “Remote elev”) “RE,OP%s,FE%s,ZE%s,SD%s,--%s”
![Page 12: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/12.jpg)
Raw Data Record Specification
12
20. RF – Repeat Foresight Record type: RF (repeat foresight) Field headers: OP: Occupied point FP: Foresight point AR: Angle right ZE: Zenith angle SD: Slope distance HR: Height of rod at the foresight --: Description “RF,OP%s,FP%s,AR%s,ZE%s,SD%s,HR%s,--%s”
21. RS - Resection Record
Record type: RS Field headers: PN: Point number CR: Circular reading ZE: Zenith (or VA, CE) SD: Slope distance (or HD) “RS,PN%s,CR%s,ZE%s,SD%s” // A resection with angles and distance “RS,PN%s,CR%s” // A resection with angles only
22. SD - Deltas record
Record type: SD Field headers: ND: Delta northing ED: Delta easting LD: Delta elevation “SD,ND%s,ED%s,LD%s”
23. SK - Stake Out Record
Record type: SK Field headers: OP: Occupy point FP: Foresight point AR: Angle right ZE: Zenith SD: Slope distance “SK,OP%s,FP%s,AR%s,ZE%s,SD%s,--%s” Note: FP field used to record design point name. Starting from SPCE3.5, it records the actual point name. It also may be blank if there is no actual point stored.
![Page 13: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/13.jpg)
Raw Data Record Specification
13
24. SL - Slope Staking Record
Record type: SL Field headers: ST: Station OD: Offset direction (ENUM) EL: Actual catch point elevation GD: Grade (design elevation of the catch point based on the slope line) AS: Ahead on station (positive when rod is beyond design station, negative when
before station) HH: Horizontal distance to hinge point (always positive) VH: Vertical distance to hinge point (positive when rod is above hinge) HC: Horizontal distance to center line (always positive) VC: Vertical distance to center point (positive when rod is above center point) CF: Slope used (ENUM) DS: Design slope OB: Observed slope
“SL,ST%s,OD%s,EL%s,GD%s,AS%s,HH%s,VH%s,HC%s,VC%s,CF%s,DS%s,OB%s” 25. SP - Store Point Record
Record type: SP Field header: PN: Point number N: Northing E: Easting EL: Elevation --: Description “SP,PN%s,N %s,E %s,EL%s,--%s”
26. SR - Slope Staking Reference Offset Record
Record type: SR Field headers: ST: Station OD: Offset direction (ENUM) EL: Actual elevation GD: Grade (design elevation, corresponds to the elevation of the found catch point) AS: Ahead on station (positive when rod is beyond design station, negative when
before station) HH: Horizontal distance to hinge point (always positive). This distance includes the
reference offset. VH: Vertical distance to hinge point (positive when rod is above hinge) HC: Horizontal distance to center line (always positive). This distance includes the
reference offset.
![Page 14: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/14.jpg)
Raw Data Record Specification
14
VC: Vertical distance to center point (positive when rod is above center point) CF: Slope used (ENUM) DS: Design slope OB: Observed slope at the catch point OL: Offset length from the catch point
“SR,ST%s,OD%s,EL%s,GD%s,AS%s,HH%s,VH%s,HC%s,VC%s,CF%s,DS%s,OB%s,OL%s” 27. SU - Sun Shot Record
Record type: SU //For a sun shot setup GH: Greenwich hour angle (GHA 0) GH: Greenwich hour angle (GHA 24) DE: Declination (DECL 0) DE: Declination (DECL 24) SM: Semi-diameter of Sun (in DMS) DT: Local date (See General and Conventional Field List) TM: Local time (See General and Conventional Field List) //For the actual sun shot BD: Backsight direct FD: Foresight direct FV: Foresight reverse BV: Backsight reverse LA: Latitude LO: Longitude EG0: Left trailing edge sun position EG1: Right trailing edge sun position EG2: Center sun position
“SU,GH%s,GH%s,DE%s,DE%s,SM%s” “SU,DT%02s%02s%04s” “SU,LA%s,LO%s,EG%s” “SU,TM%s” “SU,%s%s%s” // Will write BD,BV or FD,FV with an angle measurement. See MO record for angle units.
28. TR/SS/OB - Traverse / Sideshot / Observation Record
Record type: TR / SS / OB Field headers: OP: Occupy point FP: Foresight point (one of the following) AZ: Azimuth AR: Angle right AL: Angle left
![Page 15: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/15.jpg)
Raw Data Record Specification
15
(one of the following pair) ZE: Zenith SD: Slope distance (or) CE: Change elevation HD: Horizontal distance --: Description “TR,OP%s,FP%s,AR%s,ZE%s,SD%s,--%s” “SS,OP%s,FP%s,AR%s,ZE%s,SD%s,--%s” “OB,OP%s,FP%s,AR%s,ZE%s,SD%s,--%s”
29. PL – Point Slope Stake Record Record type: PL Field headers: PN: Hinge point name AZ: Slope direction EL:Actual catch point elevation GD: Grade (design elevation of the catch point based on the slope line) AS: Ahead on slope direction (positive when rod is left of slope, negative when right) HH: Horizontal distance to hinge point (always positive) VH: Vertical distance to hinge point (positive when rod is above hinge) CF: Slope used (0 for cut, 1 for fill) DS: Design slope OB: Observed slope --: Note (catch point description)
"PL,PN%s,AZ%d,EL%s,GD%s,AS%s,HH%s,VH%s,CF%d,DS%s,OB%s"
30. PR – Point Slope Stake Reference Offset Record
Record type: PR Field headers: PN: Hinge point name AZ: Slope direction EL: Actual elevation GD: Grade (design elevation, corresponds to the elevation of the found catch point) AS: Ahead on slope direction (positive when rod is left of slope, negative when right) HH: Horizontal distance (including reference offset) to hinge point (always positive). VH: Vertical distance to hinge point (positive when rod is above hinge) CF: Slope used (0 for cut, 1 for fill) DS: Design slope OB: Observed slope at the catch point OL: Offset length from the catch point -- : Note (catch point description) "PR,PN%s,AZ%d,EL%s,GD%s,AS%s,HH%s,VH%s,CF%d,DS%s,OB%s,OL%s"
![Page 16: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/16.jpg)
Raw Data Record Specification
16
GPS Raw Data Record Definitions
31. AH - GPS Antenna Height Record type: AH Field headers: DC: Derivation Code (ENUM) MA: Measured antenna height ME: Measure Method (ENUM) RA: Reduced antenna height (to phase center) “AH,DC%s,MA%s,ME%s,RA%s”
32. BL - GPS Base Line
Record type: BL Field headers: DC: Derivation PN: Point Name DX: Base line Delta X* DY: Base line Delta Y* DZ: Base line Delta Z* -- : Description (Feature Code) GM: GPS Measure Method (ENUM) CL: Classification HP: Horizontal Precision VP: Vertical Precision “BL,DC%s,PN%s,DX%s,DY%s,DZ%s,--%s,GM%s,CL%s,HP%s,VP%s” (*) NOTE: The GPS baseline deltas are calculated between the antenna phase centers (APC) of the base and rover GPS receivers.
33. BP - Set Base Receiver Position
Record type: BP Field headers: PN : Point Name LA: Latitude LN: Longitude HT: Ellipsoid Height SG: Setup Group (default = 0) “BP,PN%s,LA%s,LN%s,HT%s,SG%s”
![Page 17: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/17.jpg)
Raw Data Record Specification
17
34. CG – COGO Settings record Record type: CG Field headers: AO: Azimuth Orientation (ENUM) GO: Grid Orientation (ENUM) “CG,AO%s,GO%s”
35. CS - Coordinate System Identity
Record type: CS Field headers: CO: Coordinate system option (ENUM) ZG: Zone group (system) name ZN: Zone name DN: Datum name “CS,CO%s,ZG%s,ZN%s,DN%s”
36. CT - Calibration Point
Record type: CT Field headers: PN: Point Name DM: Dimensions used (ENUM) RH: Horizontal residual RV: Vertical residual “CT,PN%s,DM%s,RH%s,RV%s”
37. CV - RMS Covariance of GPS Position
Record type: CV Field headers: DC: Derivation (ENUM) SV: Minimum number of SV during observation SC: Error Scale XX: Variance X XY: Covariance X,Y XZ: Covariance X,Z YY: Variance Y YZ: Covariance Y,Z ZZ: Variance Z “CV,DC%s,SV%s,SC%s,XX%s,XY%s,XZ%s,YY%s,YZ%s,ZZ%s”
![Page 18: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/18.jpg)
Raw Data Record Specification
18
38. DG - Datum Grid Record Record type: DG Field headers: FI: File name “DG,FI%s”
39. DT - Datum Record
Record type: DT Field headers: DA: Type of datum (ENUM) RD: Ellipsoid radius IF: Ellipse inverse flattening OX: Rotation x OY: Rotation y OZ: Rotation z LX: Translation x LY: Translation y LZ: Translation z SP: Scale factor in ppm “DT,DA%s,RD%s,IF%s,OX%s,OY%s,OZ%s,LX%s,LY%s,LZ%s,SP%s”
40. EE - GPS Edit Point Record
Record type: EE Field headers: GF: Geodetic Flags (ENUM) SG: Setup Group “EE,GF%s,SG%s”
41. EP - Geodetic position
Record type: EP Field headers: TM: Time LA: Latitude LN: Longitude HT: Ellipsoid Height RH: Horizontal RMS returned from receiver RV: Vertical RMS returned from receiver DH: HDOP if receiver returns this info DV: VDOP if receiver returns this info GM: GPS Method (ENUM) CL: Classification (ENUM) “EP,TM%s:%s:%s,LA%s,LN%s,HT%s,RH%s,RV%s,DH%s,DV%s,GM%s,CL%s”
![Page 19: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/19.jpg)
Raw Data Record Specification
19
42. EQ - Equipment Record Record type: EQ Field headers: DC: Derivation Code (ENUM) RX: Rx Type RS: Rx Serial Number AN: Antenna Number (from Antenna.ini) AI: Antenna Index (measure to index from antenna.ini) AT: Antenna Type (name of antenna) TS: Antenna Serial Number TA: Tape Adjustment HO: Horizontal Offset VO: Vertical Offset “EQ,DC%s,RX%s,RS%s,AN%s,AI%s,AT%s,TS%s,TA%s,HO%s,VO%s”
43. ES - Ellipsoid Record
Record type: ES Field headers: RD : a - radius of semi major IF: 1/f - inverse flattening EM: Name - ellipse name “ES,RD%s,IF%s,EM%s”
44. GK - GPS stakeout record
Record type: GK Field headers: PN: Point name (actual point, may be blank) N : Northing E : Easting EL: Elevation --: Description (actual point description, may be blank) “GK,PN%s,N %s,E %s,EL%s,--%s”
45. GO - GPS Offset Shot Record
Record type: GO Field headers: PN: Point Name AZ: Azimuth ZE: Zenith Angle SD: Slope Distance HI: Height of laser at GPS reference point HR: Height of laser target at store offset point --: Description “GO,PN%s,AZ%s,ZE%s,SD%s,HI%s,HR%s,--%s”
![Page 20: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/20.jpg)
Raw Data Record Specification
20
46. GP - GPS Point Record Record type: GP Field headers: PN: Point Name PT: Point Type (ENUM) “GP,PN%s,PT%s”
47. GR – GPS adjusted point record
Record type: GR Field headers: N : Northing E : Easting EL: Elevation -- : Description “GR,PN%s,N %s,E %s,EL%s,--%s”
48. GS - GPS Store Point (The GS record is similar to the SP record, which records the coordinate of a point. This record identifies the point is created by GPS.) Record type: GS Field headers: PN: Point Name N : Local Northing E : Local Easting EL: Local Elevation -- : Description “GS,PN%s,N%s,E%s,EL%s,--%s”
49. HA - Horizontal Calibration (Adjust)
Record type: HA Field headers: N : Origin north E : Origin east TH: Translation north TE: Translation east RT: Rotation about origin SF: Scale factor at origin “HA,N %s,E %s,TH%s,TE%s,RT%s,SC%s” Note: all the fields may be blank if there is no adjustment done.
![Page 21: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/21.jpg)
Raw Data Record Specification
21
50. PE - Extended Projection Record Record type: PE Field headers: TP: Type of projection (ENUM) LA: Latitude of origin LN: Longitude of origin HT: Height of origin N : Origin north E : Origin east EL: Origin elevation SC: Scale factor OO: Orientation one OT: Orientation two CT: Origin center (ENUM) AF: Azimuth format (ENUM) RY: Rectify AE: Area (ENUM) FO: File name one FT: File name two “PE,TP%s,LA%s,LN%s,HT%s,N %s,E %s,EL%s,SC%s,OO%s,OT%s, CT%s, AF%s,RY%s,AE%s,FO%s,FT%s”
51. PJ - Projection Record
Record type: PJ Field headers: TP: Type of projection (ENUM) LA: Latitude of origin LN: Longitude of origin HT: Height of origin N : Origin north E : Origin east EL: Origin elevation SC: Scale factor OO: Orientation one OT: Orientation two “PJ,TP%s,LA%s,LN%s,HT%s,N %s,E %s,EL%s,SC%s,OO%s,OT%s”
52. RP – Local coordinates of calibration point
Record type: RP Field headers: N : Northing E : Easting EL: Elevation -- : Description “RP,PN%s,N %s,E %s,EL%s,--%s”
![Page 22: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/22.jpg)
Raw Data Record Specification
22
53. RX - Receiver Setup Record type: RX Field headers: DC: Derivation Code (ENUM) RA: Reduced antenna height (to phase centre) RE: Recording interval in seconds FI: Name of post processing file opened “RX,DC%s,RA%s,RE%s,FI%s”
54. ST - Local site settings
Record type: ST Field headers: LA: Latitude LN: Longitude HT: Height SC: Scale factor N : Northing offset E : Easting offset “ST,LA%s,LN%s,HT%s,SC%s,N %s,E %s”
55. VA - Vertical Calibration (Adjust)
Record type: VA Field headers: PV: Type of vertical adjustment (ENUM) N : Origin north (may be blank) E : Origin east (may be blank) LZ: Constant adjustment – translation Z (may be blank) SO: Slope north (may be blank) SA: Slope east (may be blank) GN: Geoid Model Name “VA,PV%s,N %s,E %s,LZ%s,SO%s,SA%s,GN%s”
![Page 23: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/23.jpg)
Raw Data Record Specification
23
Leveling Raw Data Record Definitions
56. LL –Level Open Loop Record Record type: LL Field headers: NA: Loop Name PN: Control Benchmark (CBM) point name for initial BS EL: Elevation of initial BM DT: Start date TM: Start time --: Description of the loop “LL,NA%s,PN%s,EL%s,DT%s,TM%s,-- %s”
57. LB – Level Raw Observation Record (backsight or foresight) Record type: LB Field headers:
NA: Loop Name BF: 0 for backsight, 1 for foresight
LM: Level Method (ENUM),
[…] for LM = three wire UW: Upper wire reading CW: Centre wire reading LW: Lower wire reading BE: Stadia Constant […] for LM = single wire CW: Centre wire reading
[…] for LM = electronic VD: Backsight rod reading HD: Horizontal distance from level to BS or FS
[…] for LM = trig ZE: Zenith Direct to BS or FS SD: Slope Distance direct to BS or FS ZE: Zenith Reverse to BS or FS SD: Slope Distance Reverse to BS or FS
// Note: when the Survey Pro setting Do Not Shoot Reverse Distances is true, SD Reverse will not be present, and the distance for this shot will be the direct face distance.
![Page 24: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/24.jpg)
Raw Data Record Specification
24
58. LF – Level Reduced Observation Record (backsight or foresight) Record type: LF Field headers:
NA: Loop Name BF: 0 for backsight, 1 for foresight
PN: Point name of FS.* FY: Backsight / Foresight Type: (ENUM)
--: Description to this LF record // optional * Note: Only BS or FS points of that are not type ‘turning point’ will have a name in this field. Observations to turning points will not have a name.
59. LP – Level 2 Peg Test Results Record Record type: LP Field headers: A1: First reading of point A while instrument is half way between point A and B B1: First reading of point B while instrument is half way between point A and B A2: Second reading of point A while instrument is almost touching rod at point A
B2: Second reading of point B while instrument is almost touching rod at point A HD: Horizontal distance between point A and B ER: Computed Error as a ratio: ((A2-B2) - (A1-B1)) / (HD)
DT: date TM: time --: Description // optional
60. LC – Level Close Loop Record
Record type: LC Field headers: NA: Loop Name
PN: Point name of closure CBM point DT: End date
TM: End time --: Description // optional
![Page 25: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/25.jpg)
Raw Data Record Specification
25
Legacy Raw Data Record Definitions These records are not used in Survey Pro version 3.5 and beyond.
61. AA – Accumulating Angle-right
Record type: AA Field headers: BC: Back circle AR: Angle right ZE: Zenith SD: Slope distance
“AA,BC%s,AR%s,ZE%s,SD%s”
62. BB - Bench level, backsight Record type: BB Field headers: PN: Backsight point EL: BS elevation ZE: Zenith SD: Slope distance -- : Description
“BB,PN%s,EL%s,ZE%s,SD%s,--%s”
63. BG - Base Point Geoid Model Elevation (Replaced by Vertical adjustment record VA) Record type: BG Field headers:
PN: Point Name HT: Ellipsoid Height GU: Geoid Undulation at base EL: Elevation of base
“BG,PN%s,HT%s,GU%s,EL%s”
64. BS - Bench level, side shots Record type: BS Field headers: PN: FS point ZE: Zenith SD: Slope distance -- : Description
“BS,PN%s,ZE%s,SD%s,--%s”
![Page 26: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/26.jpg)
Raw Data Record Specification
26
65. BT - Bench level, traverse
Record type: BT Field headers: PN: FS point ZE: Zenith SD: Slope distance -- : Description “BT,PN%s,ZE%s,SD%s,--%s”
66. HC - Horizontal Control Point (When solving local transformation, each control point’s lat, long and height will be recorded.) Record type: HC Field headers: PN: Point Name LA: Latitude LN: Longitude HT: Ellipsoid Height -- : Description “HC,PN%s,LA%s,LN%s,HT%s,--%s”
67. LE - Vertical Ellipsoid Height Setup
(Replaced by the vertical adjust record VA) Record type: LE Field headers: --: Description string “LE,--%s”
68. LG - Vertical Geoid Model Setup
(Replaced by the vertical adjust record VA) Record type: LG Field headers: GI: Geoid model index “LG,GI%s”
![Page 27: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/27.jpg)
Raw Data Record Specification
27
69. LM - Horizontal Mapping Plane Setup (Replaced by the projection records (ES,PJ,DT,CS)) Record type: LM Field headers: ME: Method CS: Coordinate System DA: Datum ZO: Zone HE: Hemisphere FI: Custom file name (cs5 or pj5) “LM,ME%s,CS%s,DA%s,ZO%s,HE%s,FI%s”
70. LH - Local transforming coefficients for horizontal
(Replaced by Horizontal adjustment record HA) Record type: LH Field headers: PN: Point Name Ha: Coefficient a Hb: Coefficient b Hc: Coefficient c Hd : Coefficient d SC: Scale RT: Rotation “LH,PN%s,Ha%s,Hb%s,Hc%s,Hd%s,SC%s,RT%s”
71. LV - Local transforming coefficients for vertical
(Replaced by Vertical adjustment record VA) Record type: LV Field headers: PN: Point Name Va: Coefficient a Vb: Coefficient b Vc: Coefficient c Ba: Base Latitude Bo: Base Longitude Bh: Base Ellipsoid Height “LV,PN%s,Va%s,Vb%s,Vc%s,Ba%s,Bo%s,Bh%s”
![Page 28: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/28.jpg)
Raw Data Record Specification
28
72. VC - Vertical Control point (When solving local transformation, each control point’s lat, long and height will be recorded.) Record type: VC Field headers: PN: Control point number LA: Latitude of control point LN: Longitude of control point HT: Ellipsoid height of control point --: Description “VC,PN%s,LA%s,LN%s,HT%s,--%s”
![Page 29: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/29.jpg)
Raw Data Record Specification
29
General and Conventional Field List
Field Type Description --: Note string Character string AD: Azimuth Direction enum (See Enumerated Fields List Below) AL: Angle Left double Angle (See MO for units) AR: Angle Right double Angle (See MO for units) AS: Ahead on station double Linear Distance (See MO for units) AU: Angle Unit enum (See Enumerated Fields List Below) AZ: Azimuth double Geodetic Angle (See MO for units) BC: Back Circle double Angle (See MO for units) BD: Backsight direct string 2 char string "BD" BP: Back point string Character string BS: Backsight double Linear Distance (See MO for units) BV: Backsight reverse string 2 char string "BV" CE: Change elevation double Linear Height (See MO for units) CF: Slope used boolean (See Enumerated Fields List Below) CR: Circular Reading double Angle (See MO for units) DE: Declination double Geodetic Angle (See MO for units) DS: Design Slope double Linear Distance (See MO for units) DT: Date (JB Record) string Character string DT: Date (SU Record) int (8) MMDDYYYY E: Adj. Easting double Linear Distance (See MO for units) EC: Earth Curvature enum (See Enumerated Fields List Below) ED: Delta easting double Linear Distance (See MO for units) EG: Sun Position string (See Enumerated Fields List Below) EL: Elevation or Adj. Elevation double Orthometric Height (See MO for units) EO: EDM offset double EDM offset ( See MO for units) FD: Foresight direct string 2 char string "FD" FE: Foresight elevation double Orthometric Height (See MO for units) FN: Feature code name string Character string FP: Foresight point string Character string FV: Foresight reverse string 2 char string "FV" GD: Grade double Unit less Slope GH: Greenwich hour angle double Geodetic Angle (See MO for units) HC: Horizontal dist. to center line double Linear Distance (See MO for units) HD: Horizontal distance double Linear Distance (See MO for units) HD: Horizontal or relative horizontal dist. double Linear Distance (See MO for units) HH: Horizontal distance to hinge point double Linear Distance (See MO for units) HI: Height of Instrument double Linear Height (See MO for units) HR: Height of Rod double Linear Height (See MO for units) LA: Latitude double Geodetic Angle (DMS) LD: Delta elevation double Linear Distance (See MO for units) LO: Longitude double Geodetic Angle (DMS) LR: Left/Right Offset double Linear Distance (See MO for units) N: Adj. Northing double Linear Distance (See MO for units) ND: Delta northing double Linear Distance (See MO for units)
![Page 30: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/30.jpg)
Raw Data Record Specification
30
NM: Job Name string Character string OB: Observed slope double Linear Distance (See MO for units) OD: Offset Direction int (See Enumerated Fields List Below) OE: Offset Delta double Linear Distance (See MO for units) OL: Offset length double Linear Distance (See MO for units) OP: Occupy point string Character string PN: Point name string Character string SD: Slope Distance double Linear Distance (See MO for units) SF: Scale Factor double Unit less Number SM: Semi-diameter of Sun (in DMS) double Angle in Degrees Minutes Seconds ST: Station double Linear Distance (See MO for units) TM: Time (JB and EP Record) string HH:MM:SS in system time TM: Time (SU – Record) double HH.dddddd in UTC Time TN: Attribute name double Linear Distance (See MO for units) TV: Attribute value in string form double Linear Distance (See MO for units) UN: Distance Unit enum (See Enumerated Fields List Below) VC: Vertical distance to center point double Linear Distance (See MO for units) VD: Vertical or relative vertical distance double Angle (See MO for units) VH: Vertical distance to hinge point double Angle (See MO for units) ZD: Zenith Direct double Angle (See MO for units) ZE: Zenith or Zenith angle double Angle (See MO for units) ZV: Zenith Reverse double Angle (See MO for units) General and Conventional Enumerated Fields List
Field Type 0 1 2 AD: Azimuth direction enum North South AU: Angle Unit enum degree grads CF: Slope used bool cut fill EC: Earth Curvature enum off on OD: Offset direction int Center Right Left UN: Distance unit enum Feet Meter US Survey Feet EG: Sun Position* string Left Trailing edge Right Trailing Edge center *Note: Enumerated as 1 char string "0","1","2"
![Page 31: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/31.jpg)
Raw Data Record Specification
31
Leveling Field List Field Type Description
A1: First 2 Peg reading from A double Linear Distance (units from MO record) A2: Second 2 Peg reading from A double Linear Distance (units from MO record) B1: First 2 Peg reading from B double Linear Distance (units from MO record) B2: Second 2 Peg reading from B double Linear Distance (units from MO record) BE: Stadia constant int Constant multiplier – unit less BF: Level backsight or foresight enum (See Enumerated Fields List Below) CW: Center stadia wire reading double Linear Distance (units from MO record) DT: Date date Character string ER: 2 Peg test collimation error double Ration (unit less) HD: Horizontal distance double Linear Distance (units from MO record) LM: Level Method enum (See Enumerated Fields List Below) LW: Lower stadia wire reading double Linear Distance (units from MO record) NA: Level Loop Name string Character string SD: Slope Distance double Linear Distance (units from MO record) TM: Time Time HH:MM:SS in system time UW: Upper stadia wire reading double Linear Distance (units from MO record) VD: Vertical or relative vertical distance double Angle (units from MO record) ZE: Zenith or Zenith angle double Angle (units from MO record) --: Description string Character string Leveling Enumerated Fields List BF: Backsight Foresight Flag enum
• 0 = Backsight observation • 1 = Foresight observation
LM: Level Method enum
• 0 = three wire • 1 = single wire • 2 = electronic, • 3 = Trig sequence (BS>BS)n - (FS>FS)n, • 4 = Trig Sequence (BS,FS>FS,BS)n
GPS Field List
Field Type Description -- : Description (Feature Code) string Character string AE: Location Indicator enum (See Enumerated Fields List Below) AF: Azimuth format enum (See Enumerated Fields List Below) AI: Antenna Index int (See Antenna.ini File) AN: Antenna Number int (See Antenna.ini File) AO: Azimuth Orientation WORD (See Enumerated Fields List Below) AT: Antenna Type (name of antenna) string Character string AZ: Azimuth double Geodetic Angle( See MO for units)
![Page 32: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/32.jpg)
Raw Data Record Specification
32
CL: Classification enum (See Enumerated Fields List Below) CO: Coordinate System Option WORD (See Enumerated Fields List Below) CT: Origin center enum (See Enumerated Fields List Below) DA: Datum Transformation Type WORD (See Enumerated Fields List Below) DC: Derivation Code enum (See Enumerated Fields List Below) DH: HDOP from Rx double Horizontal Dilution of Precision (Unit less) DM: Dimensions Used WORD (See Enumerated Fields List Below) DN: Datum name string Character string DV: VDOP from Rx double Vertical Dilution of Precision (Unit less) DX: Base line Delta X double Linear Distance (See MO for units) DY: Base line Delta Y double Linear Distance (See MO for units) DZ: Base line Delta Z double Linear Distance (See MO for units) E: Easting double Linear Grid Distance (See MO for units) EL: Elevation double Orthometric Height (See MO for units) EM: Ellipse Name string Character string FI: File name string Character string FO: File name one string Character string FT: File name two string Character string GF: Geodetic Flags bit flags (See Enumerated Fields List Below) GM: GPS Measure Method enum (See Enumerated Fields List Below) GN: Geoid Model Name string Character string GO: Grid Orientation WORD (See Enumerated Fields List Below) HI: Height of laser at GPS ref. Point double Linear Height (See MO for units) HO: Horizontal Offset double Linear Distance (See MO for units) HP: Horizontal Precision double Linear Distance (See MO for units) HR: Height of laser target at store offset Pt. double Linear Height (See MO for units) HT: Height or Ellipsoid Ht. double Linear Height (See MO for units) IF: Ellipse inverse flattening double Ellipsoid Parameter (Unit less) LA: Latitude double Geodetic Angle (DMS) LN: Longitude double Geodetic Angle (DMS) LX: Translation x double Linear Distance (See MO for units) LY: Translation y double Linear Distance (See MO for units) LZ: Translation z double Linear Distance (See MO for units) MA: Measured antenna height double Linear Height (See MO for units) ME: Measure Method enum (See Enumerated Fields List Below) N: Northing double Linear Grid Distance (See MO for units) OO: Orientation one double Latitude (DMS) or Angle (See MO for units)** OT: Orientation two double Latitude (DMS) OX: Rotation x double Angle (See MO for units) OY: Rotation y double Angle (See MO for units) OZ: Rotation z double Angle (See MO for units) PN: Point Name string Character string PT: GPS Point Type enum (See Enumerated Fields List Below) PV: Type of Vertical Adjustment WORD (See Enumerated Fields List Below) RA: Reduced antenna height double Linear Height (See MO for units) RD: Ellipsoid Radius double Ellipsoid Semi-Major Axis (See MO for units) RE: Recording interval (secs.) int GPS Data Logging Rate (seconds)
![Page 33: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/33.jpg)
Raw Data Record Specification
33
RH: Horizontal RMS from Rx double Linear Distance (See MO for units) RS: Rx Serial Number string Character string RT: Rotation about origin double Angle (See MO for units) RV: Vertical RMS from Rx double Linear Height (See MO for units) RX: Rx Type string Character string RY: Rectify boolean False - No / True - Yes SA: Slope east string Scale in parts per million (Unit less) SC: Error Scale or Scale Factor double Scale (Unit less) SD: Slope Distance double Linear Distance (See MO for units) SF: Scale factor at origin double Scale (Unit less) SG: Setup Group int Unique integer identifier SO: Slope north string Scale in parts per million (Unit less) SP: Scale factor in ppm double Scale in parts per million (Unit less) SV: Min. # of SV during obs. int Integer Number of Satellites (Unit less) TA: Tape Adjustment double Linear Distance (See MO for units) TE: Translation East double Linear Distance (See MO for units) TH: Translation North double Linear Distance (See MO for units) TM: System Time string HH:MM:SS TP: Type of projection WORD (See Enumerated Fields List Below) TS: Antenna Serial Number string Character string VO: Vertical Offset double Linear Height (See MO for units) VP: Vertical Precision double Linear Height (See MO for units) XX: Variance X double for GPS position (m2) XY: Covariance X,Y double for GPS position (m2) XZ: Covariance X,Z double for GPS position (m2) YY: Variance Y double for GPS position (m2) YZ: Covariance Y,Z double for GPS position (m2) ZE: Zenith Angle double Angle (See MO for units) ZG: Zone Group (system) name string Character string ZN: Zone name string Character string ZZ: Variance Z double for GPS position (m2) **Depends on Projection Type Used
GPS Enumerated Fields List AE: Location indicator for Denmark projections enum • 1 = None • 2 = Zeeland • 3 = Jutland • 4 = Bornholm AF: Azimuth Format enum • 0 = Geodetic • 1 = Grid AO: Azimuth Orientation WORD • 1 = North • 2 = South
![Page 34: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/34.jpg)
Raw Data Record Specification
34
CL: Classification enum • 0 = Unknown Class • 1 = Normal • 2 = Control • 3 = As Built • 4 = Check • 5 = BackSight • 6 = Deleted Normal • 7 = Deleted Control • 8 = Deleted As Built • 9 = Deleted Check • 10 = Deleted BackSight
CO: Coordinate System Option WORD • 1 = None • 2 = Scale only • 3 = Keyed in
4 = Chosen from library CT: Origin Center enum • 0 = Equator • 1 = Projection center
DA: Datum Transformation Type WORD • 513 = csdMolodenskyDatum • 514 = csdMultipleRegressionDatum • 515 = csdSevenParameterDatum • 516 = csdGridDatum • 517 = csdWGS84Datum DC: Derivation Code enum • 1 = ModeBase (Base) • 2 = ModeRover (Rover) • 3 = ModeGetBase (GetBase) • 4 = ModeStatic (Static)
DM: Number of Dimensions Used for a Calibration WORD • 1 = 0D (None) • 2 = 1D (Vertical only) • 3 = 2D (Horizontal only) • 4 = 3D (Both vertical and horizontal) • 5 = Any
GF: Geodetic Flags Bit Flags • Bit 0 = GPS Base Point • Bit 1 = GPS Horizontal Control Point • Bit 2 = GPS Vertical Control Point • Bit 3 = GPS Control Point • Bit 4 = Local Map Plane Origin (Legacy, not used in Survey Pro 3.5 and beyond) • Bit 5 = GPS Base Coordinate Invalid
![Page 35: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/35.jpg)
Raw Data Record Specification
35
GM: GPS Measure Method enum • 0 = UnknownMethod • 1 = UserInput • 2 = Autonomous • 3 = RTKFloat • 4 = RTKFixed • 5 = CopiedPoint • 6 = RTCMCode • 7 = WASS
GO: Grid Orientation WORD • 1 = NE • 2 = SW • 3 = NW • 4 = SE
ME: MeasureMethod enum • 0 = Unknown • 1 = True • 2 = Uncorrected
PT: GPS Point Type enum • 1 = Control • 2 = Check • 3 = DataCollect • 4 = Offset • 5 = RemoteElevation • 6 = PostProcess • 7 = UserInput
PV: Type of Vertical Adj. WORD • 1 = inclined plane • 2 = geoid model • 3 = combined
TP: Type of Projection WORD • 2049 = Albers Equal Area Conic • 2050 = Cassini • 2051 = Krovak • 2052 = Lambert Conformal Conic One Parallel • 2053 = Mercator • 2054 = New Zealand Map Grid • 2055 = Oblique Conformal Conic • 2056 = Oblique Mercator Azimuth • 2057 = Oblique Stereographic • 2058 = Plane • 2059 = Stereographic • 2060 = RD Stereographic • 2062 = Transverse Mercator • 2063 = United Kingdom National Grid • 2064 = Denmark • 2065 = Hungarian EOV • 2066 = Lambert Conformal Conic Two Parallel • 2067 = Oblique Mercator Two Points
![Page 36: TDS Raw Data File Codes - Bentley Communities · 2013-11-08 · Feb. 11, 2003 AH Added • Stake DTM with a centerline will output offset cut sheet data (starting with SP 3.8) August](https://reader031.fdocuments.in/reader031/viewer/2022040512/5e61c64778b573635a3884b7/html5/thumbnails/36.jpg)
Raw Data Record Specification
36
• 2068 = Double Stereographic • 2069 = Grid Legacy Field List
Field Type Desc. -- : Description (Feature Code) string Character string AR: Angle right double Angle (See MO for units) Ba: Base Latitude double Base Station Latitude (DMS) BC: Back circle double Angle (See MO for units) Bh: Base Ellipsoid Height double Base Station Height (See MO for units) Bo: Base Longitude double Base Station Longitude(DMS) CS: Coordinate System int Index into TDS Geodetic dll DA: Datum int Index into TDS Geodetic dll EL: Elevation double Orthometric Height (See MO for units) FI: File Name string Character string GI: Geoid model index int Index into TDS Geodetic dll GU: Geoid Undulation at base double Undulation Value (See MO for Units) Ha: Coefficient a double Unit less coefficient Hb: Coefficient b double Unit less coefficient Hc: Coefficient c double Distance Coefficient (See MO for units) Hd: Coefficient d double Distance Coefficient (See MO for units) HE: Hemisphere int Index into TDS Geodetic dll HT: Height double Linear Height (See MO for units) LA: Latitude double Geodetic Angle (DMS) LN: Longitude double Geodetic Angle (DMS) ME: Method int Index into TDS Geodetic dll PN: Backsight point string Character string RT: Rotation double Angle (See MO for units) SC: Scale double Unit less Number SD: Slope Distance double Linear Distance (See MO for units) Va: Coefficient a double Unit less coefficient Vb: Coefficient b double Unit less coefficient Vc: Coefficient c double Distance Coefficient (See MO for units) ZE: Zenith double Angle (See MO for units) ZO: Zone int Index into TDS Geodetic dll