TDS OASE Antifoam A
-
Upload
andrei1232000 -
Category
Documents
-
view
1.239 -
download
88
description
Transcript of TDS OASE Antifoam A
-
Dddddd
Articlenumber: 50368689
Use
OASE antifoam A is a foam control agent and an exceptionally powerful product for gas scrubbing systems, using OASE solvents.
Features
OASE antifoam A is based upon a blend of silica derivatives and silicon compounds.
Appearance: opaque, off-white liquid
Specific gravity: 1.02
Solubility: insoluble in water. Dispersable in surfactant containing systems
Viscosity: max. 2500 mPas (Brookfield RVT # 3, 50 rpm, 25C)
Feeding
The amount required to maintain control will depend primarily on the degree of degradation, level of particular matter, the presence of hydrocarbon or other contaminants and the parameters of the system. In general the main-tenance requirement is between 0.2 and 2.0 ppm to the recirculation solution. OASE antifoam A can be diluted with isopropyl alcohol (I.P.A.) in a ratio 1:1 or further to 3:1.
Handling precautions
Wear suitable protections gloves and eye/face protection. In case of insufficient ventilation wear suitable respiratory equipment. To ensure homogeneity, it is recommended to stir the product before use. Before Use review the Material Safety Data Sheet for additional information.
Transport classifications
A.D.R. not classified
IMDG not classified
U. N. nr. not classified
Labelling for handling
Symbol not regulated
R-phrases none
S-phrases none
Packaging
OASE antifoam A is packed in 25 kg (net) pails.
.
Disclaimer: While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, it is provided for your guidance only. Because many factors may affect processing or application/use, we recommend that you make tests to determine the suitability of a product for your particular purpose prior to use. NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF OUR TERMS AND CONDITIONS OF SALE. Further, you expressly understand and agree that the descriptions, design, data and information furnished by BASF hereunder are given gratis and BASF assumes no obligation or liability for the description, designs, data and information given or results obtained, all such being given and accepted at your risk.