8/12/2019 TDS - Flowflake Kristalina

1/2

www.flowcrete.com.my

Pearl Azure Blue

Flowflake Kristalina

DescriptionFlowflake Kristalina is a decorative, smooth,sparkling epoxy resin floor finish ideal for amodern contemporary environment.

UsesIdeal for public areas, shops, departmentstores, restaurants, discos, casinos, trendybars and cafes, museums and art galleries.

Benefits:

Attractive decorative finish

Extensive design potential

Seamless hygienic finish Easy to clean and maintain High chemical resistance

High scratch resistance

Wear resistant surface for wheeled traffic

Project ReferenceSelfridges London

System Design

The applied colours may differ slightly from the examples shown above.Contact our customer services for a true colour sample or a special colour match.

Standard Colour Chart

Dalmatian Azure Blue

Ebony

Cranberry

Granite

Clementine Gold

Emerald

Pacific Blue Peacock

8/12/2019 TDS - Flowflake Kristalina

2/2

2012.

02.2

8

ASIAR

ev1.1

Flowcrete Asia Sdn Bhd (366254-X)The Flooring Technology Centre

Lot 37631 & 37632, Jalan 6/37A,Taman Bukit Maluri,Industrial Area Kepong,52100 Kuala Lumpur, Malaysia.Tel: +(603) 6277 9575Fax: +(603) 6277 4645Email: malaysia@flowcrete.comFlowcrete Asia is an RPM company

Flowcrete Thailand522/41, Baan klang Muang 1,

Soi Sahakarnpramoon,Pracha-Uthit Road,Wangthonglang, Bangkok, 10310.Tel: (662) 2530 9611Fax: (662) 2530 9610

E-mail: thailand@flowcrete.com

Flowcrete VietnamRepresentative Office

3rd Floor, 130 Nguyen Cong Tru Street,Nguyen Thai Binh Ward,District 1, HCMC, VietnamTel: +848 3821 6561Fax: +848 3821 6501E-mail: vietnam@flowrcrete.com

Flowcrete Indonesia2nd Floor, Suite 203,

Palma One Building,Jl. HR Rasuna Said Kav. X2 No. 4Jakarta Selatan 12950, Indonesia.Tel: +6221 252 3201Fax: +6221 252 0720

E-mail: indonesia@flowcrete.com

www.flowcrete.com.my

Model SpecificationProduct: Flowflake KristalinaFinish: SatinThickness: Dependant on specificationColour: _______________Preparatory work and application in accordance withmanufacturers instructions.Manufacturer: Flowcrete Asia Sdn BhdTelephone: Customer Service - +603 6277 9575

Substrate RequirementsConcrete or screed substrate should be a minimum of25N/ mm

2, free from laitance, dust and other

contamination. The substrate should be dry to 75% RH asper BS8204 and free from rising damp and ground waterpressure.

Products Included in this System FloorsFlowprimeFlowcoat SF41/Flowcoat SC/Flowshield SLKristal FlakesFlowtex SealerFlowseal UV Satin Clear

Detailed application instructions are available upon request.

Installation ServiceThe installation should be carried out by a Flowcreteapproved applicator with a documented quality assurancescheme. Obtain details of our approved contractors bycontacting our customer service team or enquiring via ourweb site at www.flowcrete.com.my.

Environmental ConsiderationsThe finished system is assessed as non-hazardous tohealth and the environment. The long service life andseamless surface reduce the need for repairs,maintenance and cleaning. Environmental and healthconsiderations are controlled during manufacture andapplication of the products by Flowcrete staff and fullytrained and experienced contractors.

Focus on the FloorzoneFlowcrete Asia Sdn Bhd is a division of the FlowcreteGroup, world leaders in specialist industrial andcommercial flooring. Systems available include:underfloor heating systems, floor screeds, surface damp

proof membranes, decorative floor finishes, seamlessterrazzo, car park deck waterproofing and corrosionprotection systems to name just a few. Our corporateobjective is to satisfy your flooring needs.

Technical InformationThe figures that follow are typical properties achieved at

20oC and 50% Relative Humidity.

Speed of Cure10C 20C 30C

Light traffic 36 hrs 24 hrs 16 hrsFull traffic 72 hrs 48 hrs 36 hrsFull chemical cure 12 days 7 days 6 days

Aftercare - Cleaning and MaintenanceClean regularly using a single or double headed rotaryscrubber drier in conjunction with a mildly alkalinedetergent.

Important NoteFlowcretes products are guaranteed against defectivematerials and manufacture and are sold subject to itsstandard Terms and Conditions of Sale, copies of whichcan be obtained on request.

Further InformationTo ensure you are specifying a fit for purpose flooring foryour project please consult our Technical Advisors on thenumber below or visit our website to register your interestin specifying one of the most durable floors on the market.

Fire Resistance Class G

Certificate No 1721/75 SITAC

Slip Resistance TRRL Pendulum Slip Test

Dry 56 Wet dependant on specification

Textured systems are recommended to meet slip resistance valuerequirements for wet conditions and/or surface contaminants (wet ordry) - please contact our Technical Advisors for further details andspecifications.

Abrasion Resistance BS8204:Part 2:2002

Class AR2 -Medium duty industrial and

commercial

Temperature Resistance Tolerant of sustained temperatures up

to 60oC

Water Permeability Nil - Karsten Test (Impermeable)Vapour Permeability ASTM E96:90

2.5 g /m2/ mm/24hrs

Chemical Resistance Contact Technical Department

Impact Resistance

(ISO 6272)

1 kg weight >1.8 m

2 kg weight >1.5 m

Flexural Strength 15 N/mm2(BS6319)

Tensile Strength 10 N/mm2(BS6319)

Bond Strength Greater than cohesive strength of

25 N/mm2concrete. >1.5 MPa.