TDO & RVG6X00 Kodak

Version draft

By Ryan Severud

6/26/2013

2

Change history

Date Comments EXE Version 09/22/08 Created TDO RVG6000 Kodak

document

01/06/09 Added Troubleshoot section

01/16/09 Added USB reference

01/29/09 Two or more sensors cannot be

connect into same computer

03/03/09 Added Kodak sporadically

disconnected in Troubleshoot section

4/23/09 Added picture of regedit in

Troubleshoot section

7/16/09 Added device button and sharpness

items – latest Kodak Integration 1.0.4

11/04/09 Added MS Vista info 4.6

03/04/2011 Added support to Kodak GIP 1.14. 2011.01.01

04/04/2011 New setup instructions

11/16/2012 New CSDAT instructions

4/11/2013 Updated Image Processing

instructions

6/26/2013

3

Table of Contents

Change history .................................................................................................................... 2 Table of Contents ................................................................................................................ 3 Glossary .............................................................................................................................. 4 Objective ............................................................................................................................. 5 1 SetupKodak.exe ............................................................................................................. 10 2 RVG6X00 drive installation .......................................................................................... 12 3 TDO Settings ................................................................................................................. 16 4 Troubleshooting ............................................................................................................. 20

4.1 Trophy ..................................................................................................................... 20 4.2 USB 1.1 ................................................................................................................... 20 4.3 Multiple Kodak sensors .......................................................................................... 20 4.4 Error Trophy CCX Timer ....................................................................................... 21 4.5 Kodak sporadically gets disconnected .................................................................... 21 4.6 First time Driver Installation ................................................................................... 22

6/26/2013

4

Glossary RVG6x00 Kodak X-ray Sensor – Series 6X00

TDO The Digital Office

CSDAT Carestream Digital Acquisition Tool

6/26/2013

5

Installing/Configuring CSDAT Integration for TDO

Objective

TDO now supports integration with Carestream’s CSDAT which will provide a much

better integration experience for our users.

The new integration supports new features such as being able to take multiple xrays and

having direct access to Carestream’s post processing tools.

Prerequisites

- TDO version 11.250a or newer is installed

- CareStreamIntegration.dll version 1.0.0.4 or newer

- Downloaded latest SetupRVGDriver.exe

- Downloaded latest SetupCSDAT.exe

* CareStreamIntegration.dll is located in C:\Program Files\tdoffice\dotnet folder

*Latest file can be found in U:\TDO Fixes\Kodak Files\Carestream Integration

6/26/2013

6

Setup

1. Make sure the sensor is unplugged

2. Run the SetupRVGDriver.exe

3. Click OK on the Installer Language prompt

4. DO NOT select demo mode, click next

5. Select the driver depending on the hardware they are using. Most cases with will

be RVG 5000/5100/6000/6100, click “Install”

6. Click OK to any prompts that come up during the install

7. Once the driver finishes it will launch the SetupCSDAT.exe

8. Click next through all the prompts and wait for the installer to finish

9. Plug the sensor in and let windows install the drivers for you.

a. If it cannot find the drivers you can point to this location for the drivers:

i. 32bit: C:\Program Files\Common

Files\Trophy\Acquisition\DriverRVG

ii. 64bit: C:\Program Files (x86)\Common

Files\Trophy\Acquisition\DriverRVG

6/26/2013

7

Configuring TDO for CSDAT

1. Open TDO and navigate to Administrative > Edit Control Table > Workstation

Settings

2. Under Digital Radiography select “Carestream 6000 series” from the drop down.

It should fill in the CSDAT folder path for you.

a. If it doesn’t the path is:

i. 32bit: C:\Program Files\Carestream\Digital Acquisition Tool

ii. 64bit: C:\Program Files (x86)\Carestream\Digital Acquisition Tool

6/26/2013

8

Acquiring X-rays for CSDAT

1. In TDO go to acquire, select an image category, and click on XRay. We no

longer require sensor activation through TDO. You should be met with the

familiar count down window.

6/26/2013

9

2. Once they expose the sensor the image will go into the new TDO Image

Processing window:

A: Gives the user the ability to have the image auto rotate or apply sharpness filter

B: The user can adjust the brightness/contrast to their liking. The values will be stored

and applied to all images from this point on.

C: Toggles the sharpness filter on and off

3. The user now has an option to either acquire another image by clicking on New

RVG or edit an image.

4. Once they are happy with the image, click the “Send to TDO” and it will

automatically save to the patients Image Organizer as the category that was

selected.

6/26/2013

10

Objective (OLD TDOKodak6000.exe)

Congratulations on your new Kodak purchase! This document presents

the full installation and integration of RVG6000 Kodak x-ray sensor and

TDO.

Follow the next 3 steps:

SetupKodak.exe

RVG6000 drive installation and

TDO Settings

1 SetupKodak.exe

Make sure to unplug the RVG6X00 sensor during this step. And also,

beforehand check the MS and Office’s updates! Do not install Kodak RVG

sensor if you don’t have these items correctly installed!

Beware that Trophy v5.0.5.0 is incompatible with RVG6000. Please, uninstall

it before continuing this installation!

Download “SetupKodak.exe” from the TDO Builds ftp server. Run it.

6/26/2013

11

PS: NEVER CHECK THIS CHECKBOX “Demo mode”!!!!

If there is any message about “Windows can’t verify the publisher of this

driver software”, please accept and install the driver:

6/26/2013

12

2 RVG6X00 drive installation

Connect RVG6000 sensor in the USB port. Let Windows to recognize the

new hardware.

6/26/2013

13

6/26/2013

14

Windows will install it twice, because of 5000 series.

6/26/2013

15

And then finally:

*** If for whatever reason Windows cannot find the drivers. You can

manually point to where the drivers reside which is in:

C:\Program Files\Common Files\Trophy\Acquisition

Or if a 64bit workstation

C:\Program Files (x86)\Common Files\Trophy\Acquisition

6/26/2013

16

3 TDO Settings

In TDO, open Administrative Edit Control Table Workstation Settings.

Select “Kodak 6000 Series” in Radiography Software. Note that

Path/Source is set as “C:\Program Files\TDOffice\Kodak” or if the

workstation is 64 bit, the path would be: “C:\Program Files

(x86)\Tdoffice\Kodak”

6/26/2013

17

Note the “Use old Kodak sharpness filter” option. If this is checked, the

next xray acquired by Kodak 6000 series will have the old sharpness filter.

Close it.

Open “Acquire”

And hit “X-Ray” button. For the very first time only, the RVG6000 needs to

be registered. Therefore, you will be prompted with this message box:

6/26/2013

18

Once registered, hit ‘x-ray’ button again and it is ready to take an x-ray.

6/26/2013

19

Once the x-ray is taken, apply the filters, if necessary, and then click on

“Send to TDO” button.

On the other hand, when cancelling the x-ray, this is the message:

For multiple xrays, the device button can be useful: open xrays in TDO,

and it will automatically be waiting for the first xray. Once it has been

taken, click on the device button to take the next one, without the need

to click on the xray button again in TDO.

6/26/2013

20

4 Troubleshooting

4.1 Trophy

Beware that some Trophy software versions do not provide the “uninstall”

feature. Delete them only will not allow TDO acquires x-rays.

Solution: rename the folder “TW” to “TW-bak” and reboot the computer.

Also check the HKEY_CLASSES_ROOT\TROPHY\RVG that should be

something like this:

4.2 USB 1.1

Kodak sensor only runs on USB 2.0.

Solution: their IT team has to change to USB2.0.

4.3 Multiple Kodak sensors

Kodak driver does support only ONE sensor connected into the computer.

If, two or more sensors are connected into the same computer, TDO

keeps requesting the activation code.

Solution: Do NOT connect two or more sensors into the same computer.

“Acquire” must be closed before unplugging/plugging a different sensor.

6/26/2013

21

4.4 Error Trophy CCX Timer

If while installing Kodak sensor, the “Check to enable synchronization link”

checkbox is marked, then x-ray will not be acquired.

Solution: set HKEY_CLASSES_ROOT\TROPHY\RVG\Synchro from zero to 2.

Open Demo_GIPSDK.exe and run Load GIP Toolkit menu option. Then

run RVG Open the driver menu option and RVG Acquisition menu

option. Check that it successfully acquired an image. Rename

Demo_GIPSDK.exe and restart TDO. Check that now TDO is able to

acquire successfully.

4.5 Kodak sporadically gets disconnected

If Kodak sensor gets disconnected, it could be caused by the power

management that sets the USB to sleep mode. It is not possible to

determine the exact USB Root Hub Kodak sensor is connected. Therefore,

the solution must be applied for ALL USB Root Hub.

Solution: From the “Device Manager”, for each USB Root Hub, uncheck

the option “Allow the computer to turn off this device to save power” in

Power Management tab, as shown below:

6/26/2013

22

4.6 First time Driver Installation

When installing the drivers for the very first time, you might receive an error

message in TDO that the sensor is not connected. Usually this message is

displayed after a “Initializing Sensor” message is displayed. If this happens,

just let the TDOKodak9000 windows close normally and click on TDO

Acquire XRay button again and everything will work properly.