Technical Delivery Condition Date:-

Steel MillSL.No. Parameter SIL Requirement Steel Mill Offer

1 Technical Review

2 TDC No FW-1 (ES-PM-FW0001

3 Rev No BM

4 Application Hot forging parts

5 Specification

6 Grade SAE1541

7 Process route

8 Section 28-65 mm dia

9

10 Tolerance

11 Supply Condition

12 Chemistry

Min. Max. Min. Max.%C 0.40 - 0.45 %C%Si 0.15 - 0.35 %Si%Mn 1.35 - 1.65 %Mn%P 0.035 max] %P%S 0.05 max %S%Cr 0.05 - 0.20 %Cr%Mo 0.15 max %Mo%Ni 0.20 max %Ni%Cu 0.35 max %Cu%(Al+Ti) %(Al+Ti)%Sn 0.02 max %Sn%V 0.02 max %V%Nb 0.010 max %Nb%Zr 0.010 max %Zr%B 0.0005 max %B%Ti 0.010 max %Ti%Pb 0.010 max %Pb%Ca 0.0030 max %Ca%As 0.010 max %As%Zn 0.030 max %Zn%Sb 0.010 max %SbN2 150 ppm max N2

13 Variation

14

15 DI

16 Grain size

17 Cleanliness

18 Internal Soundness

19 Surface defect

Standard 2108-005 Dated: 01.08.2001, FW-1 (ES-PM-FW0001)

Reduction Ratio (max)

Dimensional tolerance as per ASTM A29 unless otherwise specified.

Jominy Hardenability

5 - 8 as per ASTM E112 using the McQuaid-Ehn test.

Bars must be free from pipe, voids & internal cracks.

Seam depth should not exceed 1.6% of the bar diameter for carbon and alloy steels

20 UT & MFL

21 Cutting

22 Color code

23

24

25

26

27 CST

28 Payment terms

Steel Mill:- Spicer India LimitedName:-

Bundling & strapping

Basic Rate @ steel source

Transportation cost to Pune

Transportation cost to Faridabad

Prepared by Approved by Approved by

Prepared by:- Approved by:- Approved by:- Approved by:-