TD1007 Wedge Grips
2
Wedge Style Tensile Grips Bulletin TD-1007 Description: Flat wedge and vee wedge grips for testing flat and round specimens. Grips are made from high alloy steel and faces are machine cut, hardened, and ground to tolerances that ensure proper gripping. Grips are supported in accurately aligned crosshead pocket by grip pinion shaft and operated with rack on side of each grip and pinion on shaft. Grips are available in many capacities and typically rated to the maximum capacity of the test frame. Used On: Super L hydraulic testing machines and Electomatic materials testing machines with closed crossheads Applications: Metals and other high strength materials Specifications: Max. Capacity 300 kN/60,000 lbf Max. Diameter (with vees) 28 mm/1.125 in Min. Diameter (with vees) 11 mm/0.4375 in Max. Thickness (with flats) 25 mm/1 in Max. Width (with flats) 50 mm/2 in Length Each 40 mm/1. 6 in Weight Each 150 g/0.33 lb Temperature Limits -70 to 200 °C Specifications: Max. Capacity 600 kN/120,000 lbf Max. Diameter (with vees) 57 mm/2.25 in Min. Diameter (with vees) 17 mm/0.6875 in Max. Thickness (with flats) 44 mm/1.75 in Max. Width (with flats) 63 mm/2.5 in Length Each 40 mm/1. 6 in Weight Each 150 g/0.33 lb Temperature Limits -70 to 200 °C Specifications: Max. Capacity 1000 kN/120,000 lbf Max. Diameter (with vees) 60 mm/2.375 in Min. Diameter (with vees) 13 mm/0.5 in Max. Thickness (with flats) 54 mm/2.125 in Max. Width (with flats) 50 mm/2 in Length Each 40 mm/1. 6 in Weight Each 150 g/0.33 lb Temperature Limits -70 to 200 °C Specifications: Max. Capacity 2000 kN/400,000 lbf Max. Diameter (with vees) 66 mm/2.625 in Min. Diameter (with vees) 17 mm/0.6875 in Max. Thickness (with flats) 54 mm/2.125 in Max. Width (with flats) 50 mm/2 in Length Each 40 mm/1. 6 in Weight Each 150 g/0.33 lb Temperature Limits -70 to 200 °C Description: Placing appropriate thickness grip liner between back of grip and crosshead, a wider range of specimen sizes can be tested using standard wedge grips. Grip liners are usually supplied in sets of four of same thickness. Used On: Super L hydraulic testing machines and Electomatic materials testing machines Applications: Metals and other high strength materials Specifications: Thickness 3.175 mm/0.125 in Weight Each 300 g/0.66 lb Temperature Limits -70 to 200 °C Thickness 6.35 mm/0.25 in Weight Each 300 g/0.66 lb Temperature Limits -70 to 200 °C Thickness 9.525 mm/0.375 in Weight Each 300 g/0.66 lb Temperature Limits -70 to 200 °C Thickness 12.7 mm/0.5 in Weight Each 300 g/0.66 lb Temperature Limits -70 to 200 °C Grip Reference 67-N-20 Grip Reference 67-N-23
-
Upload
marcelo-sanchez -
Category
Documents
-
view
213 -
download
0
description
Description: Flat wedge and vee wedge grips for testing flat and round specimens. Grips are made from high alloy steel and faces are machine cut, hardened, and ground to tolerances that ensure proper gripping. Grips are supported in accurately aligned crosshead pocket by grip pinion shaft and operated with rack on side of each grip and pinion on shaft. Grips are available in many capacities and typically rated to the maximum capacity of the test frame.
Transcript of TD1007 Wedge Grips
Wedge Style Tensile Grips
Bulletin TD-1007
Description: Flat wedge and veewedge grips for testing flat and roundspecimens. Grips are made from highalloy steel and faces are machine cut,hardened, and ground to tolerancesthat ensure proper gripping. Grips aresupported in accurately alignedcrosshead pocket by grip pinion shaftand operated with rack on side of each grip and pinion on shaft. Grips areavailable in many capacities and typically rated to the maximum capacity of the test frame.
Used On: Super L hydraulic testingmachines and Electomatic materialstesting machines with closedcrossheads
Applications: Metals and other highstrength materials
Specifications:Max. Capacity 300 kN/60,000 lbfMax. Diameter (with vees) 28 mm/1.125 inMin. Diameter (with vees) 11 mm/0.4375 inMax. Thickness (with flats) 25 mm/1 inMax. Width (with flats) 50 mm/2 inLength Each 40 mm/1. 6 inWeight Each 150 g/0.33 lbTemperature Limits -70 to 200 °C
Specifications:Max. Capacity 600 kN/120,000 lbfMax. Diameter (with vees) 57 mm/2.25 inMin. Diameter (with vees) 17 mm/0.6875 inMax. Thickness (with flats) 44 mm/1.75 inMax. Width (with flats) 63 mm/2.5 inLength Each 40 mm/1. 6 inWeight Each 150 g/0.33 lbTemperature Limits -70 to 200 °C
Specifications:Max. Capacity 1000 kN/120,000 lbfMax. Diameter (with vees) 60 mm/2.375 inMin. Diameter (with vees) 13 mm/0.5 inMax. Thickness (with flats) 54 mm/2.125 inMax. Width (with flats) 50 mm/2 inLength Each 40 mm/1. 6 inWeight Each 150 g/0.33 lbTemperature Limits -70 to 200 °C
Specifications:Max. Capacity 2000 kN/400,000 lbfMax. Diameter (with vees) 66 mm/2.625 inMin. Diameter (with vees) 17 mm/0.6875 inMax. Thickness (with flats) 54 mm/2.125 inMax. Width (with flats) 50 mm/2 inLength Each 40 mm/1. 6 inWeight Each 150 g/0.33 lbTemperature Limits -70 to 200 °C
Description: Placing appropriate thickness grip liner between back ofgrip and crosshead, a wider range ofspecimen sizes can be tested usingstandard wedge grips. Grip liners areusually supplied in sets of four of samethickness.
Used On: Super L hydraulic testingmachines and Electomatic materialstesting machines
Applications: Metals and other highstrength materials
Specifications:Thickness 3.175 mm/0.125 inWeight Each 300 g/0.66 lbTemperature Limits -70 to 200 °C
Thickness 6.35 mm/0.25 inWeight Each 300 g/0.66 lbTemperature Limits -70 to 200 °C
Thickness 9.525 mm/0.375 inWeight Each 300 g/0.66 lbTemperature Limits -70 to 200 °C
Thickness 12.7 mm/0.5 inWeight Each 300 g/0.66 lbTemperature Limits -70 to 200 °C
Grip Reference 67-N-20 Grip Reference 67-N-23
© 2004, Tinius Olsen 8/04 1M 04-69 Printed in U.S.A.
Contact Your Local Representative:
High and low temperature options available for use in temperature chambers.
Specifications subject to change without notice.
1065 Easton RoadHorsham, PA 19044 USA(215) 675-7100Fax (215) [email protected]
6 Perrywood Business ParkHoneycrock Lane, SalfordsRedhill, Surrey RH1 5DZ England+44 (0) 1737 765001Fax +44 (0) 1737 764768
Description: Flat wedge and veewedge grips for testing flat and roundspecimens. Grips are made from highalloy steel and faces are machine cut,hardened, and ground to tolerancesthat ensure proper gripping. Grips aresupported in accurately alignedcrosshead pocket by interchangeablegrip hangers (hangers are not normallyfurnished with replacement grips).Grips are available in many capacitiesand are typically rated to maximumcapacity of test frame.
Used On: Super L hydraulic testingmachines and Electomatic materialstesting machines with open, or semi-open, designed crossheads
Applications: Metals and other highstrength materials
Specifications (for 300 kN/60,000 lb version):Max. Capacity 150 kN/60,000 lbfMax. Diameter (with vees) 28 mm/1.125 inMin. Diameter (with vees) 11 mm/0.4375 inMax. Thickness (with flats) 25 mm/1 inMax. Width(with flats) 50 mm/2 inLength Each 40 mm/1.6 inWeight Each 150 g/0.33 lbTemperature Limits -70 to 200 °C
Specifications (for 600 kN/120,000 lb version):Max. Capacity 600 kN/120,000 lbfMax. Diameter (with vees) 57 mm/2.25 inMin. Diameter (with vees) 17 mm/0.6875 inMax. Thickness (with flats) 44 mm/1.75 inMax. Width (with flats) 63 mm/2.5 inLength Each 40 mm/1.6 inWeight Each 150 g/0.33 lbTemperature Limits -70 to 200 °C
Specifications (for 1000 kN/2 00,000 lb version):Max. Capacity 1000 kN/200,000 lbfMax. Diameter (with vees) 60 mm/2.375 inMin. Diameter (with vees) 13 mm/0.5 inMax. Thickness (with flats) 54 mm/2.125 inMax. Width (with flats) 50 mm/2 inLength Each 40 mm/1.6 inWeight Each 150 g/0.33 lbTemperature Limits -70 to 200 °C
Specifications (for 2000 kN/400,000 lb version):Max. Capacity 2000 kN/400,000 lbfMax. Diameter (with vees) 66 mm/2.625 inMin. Diameter (with vees) 17 mm/0.6875 inMax. Thickness (with flats) 54 mm/2.125 inMax. Width (with flats) 50 mm/2 inLength Each 40 mm/1.6 inWeight Each 150 g/0.33 lbTemperature Limits -70 to 200 °C
Grip Reference 67-N-22
