TC15-48 9 December 2015

Commonwealth of Australia Gazette

No. TC 15/48, Wednesday, 9 December 2015 Published by the Commonwealth of Australia

TARIFF CONCESSIONS

CONTENTS

TCO Applications ....................................................................................................... 2

TCO Application Reworded....................................................................................... 6

TCO Applications Refused ........................................................................................ 7

TCOs Made.................................................................................................................. 9

Local Manufacturer Initiated - TCO Revocation Request Refused ..................... 10

TCO Revoked - Duty Free Rate ............................................................................... 11

TCOs Revoked - Unused for over 2 years ............................................................. 12

DIBP Review of TCO Revocations Results ............................................................ 13

Intention to Revoke TCOs not used in over 2 years ............................................. 14

The Department of Immigration and Border Protection (DIBP) publishes the Commonwealth of Australia Tariff Concessions Gazette (the Tariff Concessions Gazette) free of charge on the DIBP internet site at: http://www.border.gov.au

Please Note: The last Gazette for 2015 will be published on 23 of December 2015

The next Gazette will be published on 13 of January 2016

Please note that the Industry Assistance Section has changed address. We are now located at 5 Chan St Belconnen ACT 2617. Contact numbers are listed below: General Email Inquiries……………………………[email protected] General Inquiries: ..............................................................(02) 6198 7289 Facsimile: ...........................................................................(02) 6198 7203 TAPIN help desk .................................................................(02) 6275 6534

Cat. No.

ISSN 0813-8389

©Commonwealth of Australia, 2015

http://www.border.gov.au/

2 TCO Applications Commonwealth of Australia Gazette

No TC 15/48, Wednesday, 09 Dec 2015

TCO Applications

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269K(1) - APPLICATIONS MADE FOR TARIFF CONCESSION ORDERS

Applications have been lodged for Tariff Concession Orders for the goods described in the following TABLE.

Australian manufacturers who wish to contest the granting of a Tariff Concession Order for the goods described

are invited to lodge a submission in writing in an approved form. Submissions must be lodged within 50 days

of the date of publication of this Notice.

The operative date (Op.) and TC reference number follow the description of goods.

To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.

Objections to the making of TCO submission forms are available at

http://www.border.gov.au/Tariffclassificationofgoods/Documents/B444.pdf

For guidance on the required description style, phone 02 6198 7289, fax 02 6198 7203 or email

[email protected].

THE TABLE

Description of Goods including the Schedule 4 Item Number

Customs Tariff Classification General Duty Rate

3919.90.00 TAPES, self adhesive, single sided, PVC backing

Op. 20.11.15 - TC 1542158

Stated Use:

Printable carton sealing tape

Applicant: VENUS PACKAGING

50

5%

6806.90.90 BOARD, having EITHER of the following:

(a) calcium silicate content NOT less than 60%;

(b) combined wollastonite AND quartz content NOT less than 40%

Op. 13.11.15 - TC 1541545

Stated Use:

Fire resistant boards used in buildings to prevent the spreading

of fires

Applicant: PROMAT AUSTRALIA PTY LTD

50

5%

7018.20.00 BUOYANCY MODULES, RISER, FLOWLINE AND/OR UMBILICAL, SUBSEA, with

OR without one OR both of the following:

(a) clamps;

(b) straps

Op. 13.11.15 - TC 1541547

Stated Use:

Buoyancy elements for subsea risers, flowlines and umbilicals

Applicant: WOODSIDE ENERGY LTD

50

5%

7309.00.00 FURNACE DRUMS, METALLICS RECOVERY, having ALL of the

following:

(a) gross capacity NOT greater than 2 550 kg;

(b) bolt-on lids AND seals with spout cover cap;

(c) lid fixing plates

Op. 17.11.15 - TC 1541859

Stated Use:

For the processing of metals extracted from their metallic dross

Applicant: NYRSTAR HOBART PTY LTD

50

5%

http://www.border.gov.au/Tariffclassificationofgoods/Documents/B444.pdf

mailto:[email protected]





7412.20.00 BOTTLE TRAPS, brass, with or without seal, having All of the

following:

(a) chrome plated outlet pipe length NOT less than 109 mm

and NOT greater than 341 mm;

(b) chrome plated connection pipe;

(c) Australian Standard 1589-2001 compliance

Op. 18.11.15 - TC 1541978

Stated Use:

For use in plumbing installations

Applicant: ACM PTY LTD

50

5%

8205.70.00 SETS, PIPE CLAMP, consisting of ALL of the following:

(a) pipe holder with ratchet strap;

(b) carrier bars;

(c) pulling strap with holder;

(d) pulling shoes;

(e) pulling slides including ratchet

Op. 13.11.15 - TC 1541491

Stated Use:

For holding and securing polyethylene pipes in place

Applicant: PLASSON AUSTRALIA PTY LTD

50

5%

8404.20.00 STEAM TURBINE POWER PLANT CONDENSERS, air cooled, finned

tube, having ALL of the following:

(a) NOT less than 15 tube bundles;

(b) NOT less than 150 tubes per bundle;

(c) tube bundle length NOT less than 11 500 mm;

(d) operating temperature NOT less than 110 degrees C;

(e) heat exchanger capacity NOT less than 40 000 kW;

(f) auxiliary equipment being NOT less than 8 of the

following;

(i) condensate tank;

(ii) steam duct;

(iii) sparse tank;

(iv) pipelines AND/OR hoses with OR without

fittings;

(v) drainers;

(vi) cleaners;

(vii) dump plate;

(viii) vacuum pumps;

(ix) wind wall sheet;

(x) heat exchanger steel bottom structure;

(xi) walkways AND ladders AND stairs;

(xii) valves;

(xiii) rupture discs;

(xiv) electrical cable AND fittings

Op. 16.11.15 - TC 1541700

Stated Use:

Condenser that functions as a direct dry cooling system where

steam is condensed inside air-cooled finned tubes

Applicant: I H I ENGINEERING AUSTRALIA PTY LTD

50

5%

8404.20.00 STEAM TURBINE POWER PLANT CONDENSERS, air cooled, finned tube,

gas to air AND/OR water to air, having ALL of the following:

(a) NOT less than 15 tube bundles;

(b) NOT less than 150 tubes per bundle;

(c) tube bundle length size NOT less than 11 500 mm;

(d) operating temperature NOT less than 110 degrees C;

(e) heat exchanged capacity NOT less than 40 000 kW

Op. 16.11.15 - TC 1541703

Stated Use:

Taking exhausted steam from turbine and condensing it back into

water

Applicant: I H I ENGINEERING AUSTRALIA PTY LTD

50

5%





8413.70.90 PUMPS, SEAWATER, AXIALLY SPLIT, SINGLE STAGE, DOUBLE SUCTION,

including ALL of the following:

(a) super duplex stainless steel casing, shaft AND impeller;

(b) suction size NOT less than 800 mm and NOT greater than

1 100 mm;

(c) discharge size NOT less than 600 mm and NOT greater than

900 mm;

(d) impeller diameter NOT less than 800 mm and NOT

greater than 1 200 mm;

(e) flow rate NOT less than 5 000 m3/h and NOT greater

than 15 000 m3/h

Op. 20.11.15 - TC 1542159

Stated Use:

Pump seawater in ammonia nitrate plant

Applicant: SULZER PUMPS (ANZ) PTY LTD

50

5%

8417.10.00 METAL RECOVERY SYSTEM, programmable logic controlled, having a

furnace drum capacity NOT less than 1 500 kg and NOT

greater than 2 250 kg, including ALL of the following:

(a) furnace with burners AND refractory lined enclosure;

(b) loading table with hydraulic loading AND lifting AND

tilting unit with drum rotating drive;

(c) recovery furnace drums;

(d) launder trough;

(e) safety barriers AND access ladder;

(f) control panel

Op. 17.11.15 - TC 1541858

Stated Use:

For the recovery of metals from their metallic dross

Applicant: NYRSTAR HOBART PTY LTD

50

5%

8421.39.00 ELECTROSTATIC PRECIPITATOR MODULES, rigid frame, unassembled,


(a) heaters;

(b) air fans;

(c) rotary valves;

(d) transformer rectifiers;

(e) rappers;

(f) instrumentation,

with OR without ANY of the following:

(i) chain conveyors;

(ii) chutes;

(iii) ducts;

(iv) expansion joints;

(v) insulation AND/OR cladding;

(vi) grid plates;

(vii) pipes;

(viii) stairs;

(ix) rails;

(x) platforms;

(xi) ladders;

(xii) lighting;

(xiii) transport supports;

(xiv) lifting beam

Op. 18.11.15 - TC 1541979

Stated Use:

Once integrated with other modularised plant, the goods will be

used to filter particles from gas produced during poly-metallic

processing operations

Applicant: NYRSTAR PORT PIRIE PTY LTD

50

5%





8428.90.00 HYDRAULIC LIFTING MACHINE, hook lift, truck OR trailer

mountable, lifting capacity NOT greater than 30 tonnes

Op. 19.11.15 - TC 1542198

Stated Use:

For installation on trucks to facilitate the transportation and

handling of goods and materials in specialised containers and/or

bins fitted with hook-lift connection

Applicant: PAPAS WASTE EQUIPMENT INTERNATIONAL PTY LTD

50

5%

8481.80.90 HYDRAULIC CONTROL VALVES, DIRECTIONAL, stackable, load sensing,

pressure-compensated, including ALL of the following:

(a) working pressure NOT greater than 350 bar;

(b) pump flow NOT greater than 210 litres per minute per inlet

section;

(c) spool actuators;

(d) relief valves;

(e) pilot restrictor

Op. 06.11.15 - TC 1540955

Stated Use:

For use with mobile machines such as elevated work platforms,

cranes, forklift, excavators, cherry pickers, boom lifts and

harvesters where directional control is required

Applicant: PARKER HANNIFIN (AUSTRALIA) PTY LTD

50

5%

8537.20.90 CABLE REEL CARS, crawler mounted, including ALL of the following:

(a) motorized cable reel with 80 m trailing cable;

(b) 440 V isolating switchboard;

(c) 11 kV switchboard;

(d) 11 kV input AND 440V output transformer;

(e) control panel

Op. 13.11.15 - TC 1541544

Stated Use:

Supply power and control signals to mobile conveyor bridge &

crawlers & handles cables during relocations

Applicant: ALCOA OF AUSTRALIA LIMITED

50

5%

6 TCO Application Reworded Commonwealth of Australia Gazette


TCO Applications R ewor ded

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269L(4B)(b) - PROPOSAL TO AMEND DESCRIPTION OF GOODS FOLLOWING AN OBJECTION

SUBMISSION

Amended description has been proposed for the Tariff Concession Order application shown in the following

TABLE.

Australian manufacturers who consider that there are reasons why the Tariff Concession Order as proposed to be

amended should not be made are invited to lodge a submission. Submissions must be lodged no later than 14

days after the publication of this Notice.

The operative date (Op.) and TC reference number follow the description of goods.

To assist local manufacturers, the use(s) to which the goods can be put follow the description of goods.

THE TABLE


Customs Tariff Classification

8428.90.00 FOODSTUFF BAG HANDLING LINE, programmable logic controlled,


(a) bag placement four axis robot;

(b) mechanical AND/OR vacuum gripper;

(c) servo driven conveyor, incorporating encoded variable

speed controls;

(d) bag top AND/OR sides flattener;

(e) bag blower;

(f) bag positioning sensor;

(g) maximum operating speed NOT less than 240 bags per minute

Op. 28.08.15 - TC 1533103

Stated Use:

For the placement of chips, popcorn, biscuit and dried fruit

bags in an ordered orientation on conveyors for later packing

into retail packages

Applicant: METRO MOTION PTY LTD

50

7 TCO Applications Refused Commonwealth of Australia Gazette


TCO Applications R efused

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269R(1) - APPLICATIONS FOR TARIFF CONCESSION ORDERS REFUSED

Applications for Tariff Concession Orders for the goods described in the following TABLE have been refused.

THE TABLE



7323.93.00 COOKWARE, stainless steel, whether OR not in sets, being ANY of

the following:

(a) braisers;

(b) casseroles;

(c) pans;

(d) pots;

(e) double boiler pots;

(f) double burner griddles;

(g) double burner grill pans;

(h) Dutch ovens;

(i) egg poaching pan inserts;

(j) fish kettles;

(k) griddles;

(l) grill trays;

(m) baking dishes;

(n) pasta inserts;

(o) roasting racks;

(p) saucepans;

(q) skillets;

(r) steamers;

(s) woks;

(t) stockpots;

(u) roaster,


(i) non-stick coating;

(ii) lids;

(iii) copper OR aluminium bases;

(iv) non steel handles

Op. 30.06.15 - TC 1525067

Reason for refusal:

Substitutable goods produced in Australia in the ordinary course

of business by Intercast & Forge Pty Ltd, Wingfield, S.A.

50

7610.90.00 STAIRCASE, unassembled, having a flight height NOT less

than 1 m and NOT greater than 2 m

Op. 29.06.15 - TC 1524086

Reason for refusal:


of business by Ullrich Aluminium Pty Ltd, Carole Park, Qld

50

8 TCO Applications Refused Commonwealth of Australia Gazette




7615.10.00 COOKWARE, aluminium, whether OR not in sets, being ANY of the

following:

(a) braisers;

(b) casseroles;

(c) pans;

(d) pots;

(e) double boiler pots;

(f) double burner griddles;

(g) double burner grill pans;

(h) Dutch ovens;

(i) egg poaching pan inserts;

(j) fish kettles;

(k) griddles;

(l) grill trays;

(m) baking dishes;

(n) pasta inserts;

(o) roasting racks;

(p) saucepans;

(q) skillets;

(r) steamers;

(s) woks;

(t) stockpots;

(u) roasters,


(i) non-stick coating;

(ii) lids;

(iii) copper bases;

(iv) non-aluminium handles AND/OR lids

Op. 30.06.15 - TC 1525069

Reason for refusal:


of business by Intercast & Forge Pty Ltd, Wingfield, S.A.

50

9 TCOs Made Commonwealth of Australia Gazette


TCOs M ade

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269R(1) - TARIFF CONCESSION ORDERS MADE

Tariff Concession Orders have been made for the goods described in the following TABLE.

The operative date (Op.) and TC reference No. follow the description of goods.

Local manufacturers of substitutable goods may request the revocation of TCOs at any time.

THE TABLE


Customs Tariff Classification Last Date of Effect

3916.90.00 SHEETS, polycarbonate, multiwall, with OR without tongue AND

groove connection

Op. 15.09.15 Dec. date 07.12.15 - TC 1535030

50

6006.32.00 TICKING, MATTRESS OR BEDDING

Op. 16.09.15 Dec. date 07.12.15 - TC 1535190

50

7326.90.90 DRILLING CONDUCTOR TENSIONERS, OIL AND GAS WELL, offshore

Op. 16.09.15 Dec. date 07.12.15 - TC 1535363

50

8301.70.00 KEYS, door lock

Op. 16.09.15 Dec. date 07.12.15 - TC 1535360

50

8422.30.90 BAG FILLING AND CLOSING MACHINES, including ALL of the following:

(a) bag openers;

(b) bag fillers;

(c) bag closers;

(d) bag weighers

Op. 17.09.15 Dec. date 07.12.15 - TC 1535483

50

8479.89.90 PIPE GRIPPERS, INTERNAL CYLINDER ENGAGEMENT, hydraulically

powered, with OR without EITHER of the following:

(a) power pack AND electric motor driven pump;

(b) hose reel

Op. 08.09.15 Dec. date 07.12.15 - TC 1534427

50

8479.89.90 PRESSURE CAPS, HORIZONTAL SUBSEA PIPELINE CONNECTION

Op. 09.09.15 Dec. date 07.12.15 - TC 1534573

50

8479.89.90 CONDUCTOR TENSIONER CONTROL UNITS, OIL AND GAS WELL, offshore,


(a) hydraulic hoses;

(b) tanks;

(c) hydraulic power pumps;

(d) accumulators

Op. 16.09.15 Dec. date 07.12.15 - TC 1535364

50

8479.89.90 SCRUBBERS AND DRYERS, FLOOR, battery powered, having a weight

NOT greater than 30 kg

Op. 24.09.15 Dec. date 07.12.15 - TC 1536231

50

8516.79.00 SETS, DEPILATORY WAX HEATER, with OR without depilatory wax,

including BOTH of the following:

(a) an electric heater with a lid;

(b) spatula

Op. 16.09.15 Dec. date 07.12.15 - TC 1535361

50

10 TCOs Made and

Local Manufacturer Initiated - TCO Revocation Request Refused





8525.80.90 DIGITAL VIDEO RECORDER (DVR) SECURITY SYSTEM, including ALL of

the following:

(a) cameras;

(b) hard disk drive;

(c) cables;

(d) mouse;

(e) fixing hardware

with OR without EITHER of the following:

(i) AC adaptor;

(ii) remote control

Op. 15.09.15 Dec. date 07.12.15 - TC 1535159

50

Local M anufac tur er Initiated - TC O R evocation R equests Refused

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269SE(1) - REFUSAL TO REVOKE A TARIFF CONCESSION ORDER CUSTOMS ACT 1901

The Request for revocation of the Tariff Concession Order for goods described in the following TABLE has been

refused.

THE TABLE



3206.49.90 THERMAL BLACK PIGMENT, carbon black

Op. 01.01.07 - TC 0614029

Note: See Revocation notice at page 11

50

11 TCO Revoked - Duty Free Rate Commonwealth of Australia Gazette


Customs Initi ated - Intention to R evoke C ancelled

TCOs R evoked - D uty Free R ate

CUSTOMS ACT 1901 - NOTICE PURSUANT TO SECTION 269SE(2)

A TARIFF CONCESSION ORDER REVOKED AT THE INITIATIVE OF THE DEPARTMENT OF IMMIGRATION AND BORDER PROTECTION

The Tariff Concession Order listed in THE TABLE below has been revoked.

THE TABLE



3206.49.90 THERMAL BLACK PIGMENT, carbon black

Op. 01.01.07 Dec. date 06.11.06 - TC 0614029

Order revoked - change in Tariff Classification to 2803.00.00

which has a Free rate of duty

50

30.11.15

12 TCOs Revoked - Unused for over 2 years Commonwealth of Australia Gazette


TCOs R evoked - U nused for over 2 years

CUSTOMS ACT 1901

NOTICE PURSUANT TO SECTION 269SE(2) - TARIFF CONCESSION ORDER REVOCATION AT THE INITIATIVE OF THE DEPARTMENT

OF IMMIGRATION & BORDER PROTECTION

The Tariff Concession Orders listed in THE TABLE below have has not been used for at least 2 years and have

been revoked under Section 269SD(1A). In transit provisions apply.

The intention to revoke these orders was notified in Gazette TC 15/43 dated 4 November 2015.

Contact: Phone 02 6275 6534, fax 02 6198 7203 or email [email protected].

THE TABLE



7304.41 TUBES, seamless, stainless steel, plain square cut ends, minimum

length 3 000 mm, to Specification ASTM A269, type 316L, having

SI. surface finished: O.D. - bright annealed;

I.D. - electro polished to RA.4um; or

SU. surface finish: O.D. - bright annealed;

I.D. - electro polished to RA.8um,

in the following sizes:

(a) 12.7 mm x 1.651 mm WT;

(b) 19.05 mm x 1.651 mm WT;

(c) 25.4 mm x 1.651 mm WT;

(d) 38.1 mm x 1.651 mm WT;

(e) 50.8 mm x 1.651 mm WT;

(f) 63.5 mm x 1.651 mm WT;

(g) 76.2 mm x 1.651 mm WT;

(h) 101.6 mm x 2.108 mm WT;

(i) 101.6 mm x 3.175 mm WT;

(j) 152.4 mm x 5.004 mm WT

Op. 07.10.91 Dec. date 19.02.92 - TC 9108894

Revoked for two years non-use. In transit provisions apply

50

01.12.15

7606.12.00 COIL, ALUMINIUM, BRAZING, 3000 series core alloy, clad on both

sides with an aluminium alloy, having ALL of the following:

(a) silicon (Si) in the range from 9% to 11% (weight %)

(both inclusive);

(b) magnesium (Mg) in the range from 1% to 1.4% (weight %)

(both inclusive);

(c) bismuth (Bi) in the range from 0.05% to 0.15% (weight %)

(both inclusive);

(d) thickness up to 1.3 mm;

(e) width up to 350 mm

Op. 21.08.98 Dec. date 30.10.98 - TC 9807455


50

01.12.15

7607.11 FOIL, aluminium, annealed, having ALL of the following:

(a) width exceeding 1 500 mm;

(b) thickness NOT exceeding 0.007 mm;

(c) maximum tensile strength 97 MPa,

conforming to the A.D.C. Standard A 1145

Op. 03.10.91 Dec. date 03.10.91 - TC 9107903


50

01.12.15

7607.19.00 FOIL, ALUMINIUM, having ALL of the following:

(a) gauge NOT less than 25 microns and NOT greater than 50

microns;

(b) printed with colours on one side;

(c) on reels having a width greater than 520 mm

Op. 27.07.05 Dec. date 21.10.05 - TC 0509832


50

01.12.15

mailto:[email protected]

13 TCOs Revoked - Unused for over 2 years and

DIBP Review of TCO Revocations Results





7607.20.00 PRINTED CIRCUIT BOARD BACKING AND ENTRY BOARDS, wood pulp core,

with aluminium foil laminated on two sides

Op. 03.08.98 Dec. date 16.10.98 - TC 9806815


50

01.12.15

8516.80 HEATERS, coil, tubular metal sheath, minerally insulated, having

ALL of the following:

(a) total element cross-section (including resistance wire,

insulation and sheath) NOT exceeding 4 mm;

(b) 240 V;

(c) wattage NOT exceeding 550 W

Op. 01.10.91 Dec. date 02.10.91 - TC 9107928


50

01.12.15

Customs R evi ew of TC O R evocations R esults

CUSTOMS ACT 1901 - 269SH(10) – RESULT OF A DEPARTMENT OF IMMIGRATION & BORDER PROTECTION REVIEW OF A

REVOCATION DECISION

The Department of Immigration and Border Protection internal review result made on the Tariff Concession Order

revocation for goods described in the following TABLE has been finalised:

THE TABLE

Description of Goods including the


Schedule 4 Item Number

Last Date of Effect

Review

Decision

TCO REVOKED

7306.30.00 TUBES, cold drawn, welded to specification DIN 2393,

having BOTH of

the following:

(a) carbon content NOT less than 0.06% and NOT greater

than 0.4% by weight;

(b) outside diameter NOT less than 6.4 mm and NOT

greater than 203.2 mm

Op. 28.06.95 - TC 9508551

Department of Immigration and Border Protection Decision:

Revocation of TCO affirmed

50

16.08.15

REVOKED

14 Intention to Revoke TCOs not used in over 2 years Commonwealth of Australia Gazette


Intention to Revoke TC Os not used i n over 2 years

TARIFF CONCESSION ORDERS (TCOs) NOT USED IN THE PREVIOUS 2 YEARS

The Comptroller-General of Customs is satisfied that the TCOs listed in the table below are no longer required

because, in the 2 years preceding the day of this notice, they have not been quoted in an import declaration

to secure a concessional rate of duty.

From Thursday, 7 January 2016, it is intended to take action to revoke these Orders under subsection 269SD

(1A) of the Customs Act 1901. In accordance with subsection 269SG(2) of the Customs Act 1901, in transit

provisions shall apply. If revoked, the expected date of effect will be 6 January 2016.

Interested parties are invited to provide, by close of business, Wednesday, 6 January 2016, written reasons

why an Order should NOT be revoked.

Please advise if any of the Orders listed below have been quoted on an import declaration.

If a request is made to retain an Order used for the granting of a Determination, please specify the

Determination and the linked Item number to enable mapping to the Order and its scope.

Contact: Email [email protected], fax 02 6198 7203 or phone 02 6275 6534.

THE TABLE

______________________________________________________________________________________________________________

Tariff

Classification Description Concession Number

______________________________________________________________________________________________________________

8476.81.00 VENDORS, combination food and beverage

Op. 07.07.04 Dec. date 01.10.04 - TC 0406875

8417.80.00 IGNITERS, FLARE, COKE BATTERY BLEEDER VENT

Op. 07.12.07 Dec. date 29.02.08 - TC 0720950

8417.80.00 OVENS, MIRROR LAMINATING, natural gas fired, comprising ALL of

the following:

(a) vacuum blanket moulding system;

(b) integrated cooling system;

(c) automated mould transfer system

Op. 11.05.09 Dec. date 31.07.09 - TC 0915961

8417.80.00 BURNERS, MELTING AND FUSING, MINERAL SAMPLE, liquefied petroleum

gas (LPG) OR propane fuelled, programmable logic controlled

Op. 25.09.09 Dec. date 18.12.09 - TC 0936288

8417.90.00 ROTARY KILN TYRES OR RIDING RINGS, having BOTH the following:

(a) weight exceeding 17 tonnes;

(b) outside diameter exceeding 4 metres

Op. 03.07.02 Dec. date 20.09.02 - TC 0205760

8417.90.00 RADIANT HEATER COILS, comprising of spun cast high nickel and

chrome alloy

Op. 03.10.03 Dec. date 30.12.03 - TC 0312598

8479.89.90 BUTT SPLICERS AND/OR UNWINDERS, LAMINATOR

Op. 02.11.05 Dec. date 16.01.06 - TC 0515324

8479.89.90 PRESSES, SCREW, OIL, worm assembly

Op. 25.07.06 Dec. date 13.10.06 - TC 0612374

8479.89.90 STANDS, UNWIND, PAPER ROLL

Op. 29.09.06 Dec. date 22.12.06 - TC 0615150

8479.89.90 SYSTEMS, DIRECT METAL DEPOSITION, comprising ALL of the

following:

(a) helium neon (HeNe) lasers;

(b) closed loop controls;

(c) graphical user interfaces;

(d) powder feeders

Op. 01.11.06 Dec. date 19.01.07 - TC 0618075



Tariff


8479.89.90 DISPENSERS, INJECTION, comprising ALL of the following:

(a) double wall outlet cones;

(b) flow valves;

(c) gas distributors

Op. 08.11.06 Dec. date 19.01.07 - TC 0618381

8479.89.90 OUTLETS, STORAGE SILO, comprising ALL of the following:

(a) shut off and maintenance valves;

(b) fluidising bottoms;

(c) pressure gas feeders

Op. 10.11.06 Dec. date 02.02.07 - TC 0618436

8479.89.90 LINES, LACQUER SPRAYING, TIMBER BOARD, programmable

logic controlled, comprising ALL of the following:

(a) calendar roller coaters;

(b) conveyors;

(c) curtain coaters;

(d) ultra violet (U.V.) curers;

(e) flash off tunnels

Op. 21.12.06 Dec. date 16.03.07 - TC 0620123

8479.89.90 LINERS, POT SHELL, ALUMINIUM SMELTING, comprising ALL of the

following:

(a) longitudinal travel cranes;

(b) traverse cross travel trolleys;

(c) clamping frames;

(d) interchangeable compacting tools;

(e) feeders with hoppers

Op. 02.03.07 Dec. date 25.05.07 - TC 0703295

8479.89.90 MACHINES, SINGULATION

Op. 02.03.07 Dec. date 25.05.07 - TC 0703430

8479.89.90 DISPENSING HEADS, SEMICONDUCTOR FLUID AND/OR ADHESIVE AND/OR

PROTECTIVE COATING LIQUID AND/OR PASTE, programmable logic

controlled

Op. 28.08.07 Dec. date 09.11.07 - TC 0713587

8479.89.90 PHARMACEUTICAL MANUFACTURING PROCESSING LINE, programmable logic

controlled, comprising ALL of the following

(a) fluid bed dryers;

(b) coating machines;

(c) high shear granulators;

(d) conical wet mills;

(e) fluidized bed processors;

(f) wash water preparers;

(g) dry granule handlers

Op. 25.09.07 Dec. date 14.12.07 - TC 0716255

8479.89.90 ASSEMBLY LINE, MOTOR VEHICLE BATTERY LID, comprising BOTH of the

following:

(a) flame arresters insertion;

(b) battery handles insertion

Op. 24.10.07 Dec. date 16.01.08 - TC 0718128

8479.89.90 BOTTLE DRAINAGE MACHINES, SPARKLING WINE, programmable logic

controlled

Op. 30.10.07 Dec. date 31.01.08 - TC 0718551

8479.89.90 PIPE LINING MACHINES, CEMENT MORTAR, having a pipe lining

diameter capacity NOT greater than 2.5 m

Op. 09.11.07 Dec. date 13.02.08 - TC 0719098

8479.89.90 LENS MANUFACTURING AND/OR PROCESSING LINE, comprising ALL of the

following:

(a) grinders and/or generators;

(b) polishers;

(c) chillers;

(d) blockers

(e) engravers;

(f) analysers

Op. 26.11.07 Dec. date 08.02.08 - TC 0720092



Tariff


8479.89.90 TAPING AND/OR REWINDING LINE, comprising ALL of the following:

(a) pay-off stands;

(b) unwinding dancers;

(c) support and/or guiding rollers;

(d) taping heads;

(e) haul off capstans

Op. 27.12.07 Dec. date 14.03.08 - TC 0721999

8479.89.90 SORTERS, AEROSOL CAP

Op. 25.02.08 Dec. date 02.05.08 - TC 0803138

8479.89.90 DISCHARGERS, DEWATERED CONCENTRATES, ORE PROCESSING FILTERS,

comprising ALL of the following:

(a) top and bottom chambers;

(b) top and bottom gates;

(c) lifting jacks;

(d) support structures

Op. 26.02.08 Dec. date 09.05.08 - TC 0803140

8479.89.90 DISTRIBUTORS, AIR, EFFLUENT AND/OR WASTEWATER REACTOR, having

BOTH of the following:

(a) aeration header;

(b) air lift mixer

Op. 21.04.08 Dec. date 11.07.08 - TC 0804747

8479.89.90 MACHINES, CLEANING, GLASS MOULD, programmable logic controlled,


(a) conveyors;

(b) immersion tanks and/or spraying tanks and/or acid tanks;

(c) baskets;

(d) basket feeders;

(e) frames;

(f) lifters;

(g) clean air circulator;

(h) drying oven;

(i) racks;

(j) connection pipes;

(k) tank heaters

Op. 18.06.08 Dec. date 01.09.08 - TC 0813299

8479.89.90 DREDGERS, precision, profiling, having BOTH of the following:

(a) plate handling frame;

(b) grouting module

Op. 25.06.08 Dec. date 12.09.08 - TC 0814430

8479.89.90 POWDER COATING LINE, comprising BOTH of the following:

(a) spray booth;

(b) ultra violet curing oven

Op. 14.08.08 Dec. date 07.11.08 - TC 0826501

8479.89.90 ASSEMBLERS, VALVE ACTUATOR, programmable logic controlled,


(a) centrifugal bowls;

(b) hopper systems;

(c) double feeder tracks;

(d) double head pick and place unit;

(e) optical inspection unit;

(f) vibrating bowl;

(g) belt conveyor

Op. 04.09.08 Dec. date 28.11.08 - TC 0829703

8479.89.90 COMPARTMENT RACKS, GLASS SHEET STORAGE, moveable

Op. 22.10.08 Dec. date 16.01.09 - TC 0836601

8479.89.90 ANOLYTE AND CATHOLYTE PRODUCTION SYSTEM, including ALL of the

following:

(a) electricals enclosure;

(b) hydraulics enclosure;

(c) pumps;

(d) monitoring equipment

Op. 12.11.08 Dec. date 06.02.09 - TC 0839573



Tariff


8479.89.90 MODULES, PNEUMATIC CONVEYOR SYSTEM, being in line ash collection

and volumetric feeding apparatus, incorporating ALL of the

following:

(a) inlet;

(b) vent;

(c) outlet dome valve;

(d) electro-pneumatic control panel

Op. 23.12.08 Dec. date 20.03.09 - TC 0844983

8479.89.90 PHOTOVOLTAIC RECEIVERS ASSEMBLY LINE, programmable logic

controlled, comprising ALL of the following:

(a) roller dowels;

(b) control boxes;

(c) rotators;

(d) flippers;

(e) hoists;

(f) testing stations;

(g) testers;

(h) fitters;

(i) compressors;

(j) clamps;

(k) pressers;

(l) conveyors;

(m) cables;

(n) robotic pick and place machines;

(o) magazines/trays;

(p) unloading machines;

(q) loading machines;

(r) cleaning machines;

(s) feeders;

(t) controllers

Op. 27.01.09 Dec. date 24.04.09 - TC 0902573

8479.89.90 MINE CLEARING MACHINES, track laying, motorised, having ALL

of the following:

(a) armour plating;

(b) remote control;

(c) flail and tiller unit or double flail unit

Op. 29.01.09 Dec. date 24.04.09 - TC 0902829

8479.89.90 PRESSES, MOUNTING GEARS, hydraulic

Op. 18.02.09 Dec. date 15.05.09 - TC 0905599

8479.89.90 GREASE FILLING AND TREATMENT LINE, comprising ALL of the

following:

(a) feed pumps;

(b) edge filters;

(c) colloid mills;

(d) deaeration pumps;

(e) ball valve taps

Op. 06.03.09 Dec. date 29.05.09 - TC 0907854

8479.89.90 DEFUSING WRENCHES, EXPLOSIVE ORDNANCE, remote manipulation,

having

BOTH of the following:

(a) power cartridges;

(b) electronic initiation

Op. 02.04.09 Dec. date 26.06.09 - TC 0911257

8479.89.90 POSTFORMING MACHINES, programmable logic controlled

Op. 20.04.09 Dec. date 10.07.09 - TC 0913050

8479.89.90 SWIVELS, CEMENTING MANIFOLD, DOWNHOLE

Op. 19.05.09 Dec. date 07.08.09 - TC 0916981



Tariff


8479.89.90 VEHICLES, SUCTION COLLECTION, ride in, having ALL of the

following:

(a) hopper capacity NOT greater than 2.0 cubic metres;

(b) hopper weight capacity NOT greater than 3 000 kg;

(c) maximum suction floor nozzle width NOT greater than 2 000

mm;

(d) turning radius NOT greater than 5 150 mm;

(e) maximum travelling speed NOT greater than 10 km/h;

(f) four wheel steering

Op. 04.06.09 Dec. date 28.08.09 - TC 0918988

TC15-48 9 December 2015

Documents

Transcript of TC15-48 9 December 2015