TB016 OPERATING RANGE:mm TB014 Long Arm …...TB014 and TB016*Spring applied, hydraulically released...
Transcript of TB016 OPERATING RANGE:mm TB014 Long Arm …...TB014 and TB016*Spring applied, hydraulically released...
TB014 and TB016
1155
1520
855
12103835(3875)
3695(3735)
250
300
1195
230980
1300
205
1030
2295
525
445
75°
50° R1085
R1195
R1505
980
1300
*: in using WIDE DOZER BLADE *: in using WIDE DOZER BLADE
R1415
2175
(237
5)35
90(3
720)
2575
(270
5)17
15(1
910)
1505(1520)
365
2550(2600)
3700(3890)
3800(3990)
215
235
365
**
SPECIFICATIONS
Track Width : RT (ST)
Max. Dig. Depth Max. Vertical Dig. Depth Max. Dump Height Max. Dig. Height Max. Dig. Radius Max. Floor Dig. Radius Min. Slew Radius Swing RH/LH Max. Bucket Off-set RH/LH
Discharge LPM Breaker & Service Port LPM
Slew Motor
Traction Motor Hydraulic Tank Capa. l
Type Set Press. Mpa
Pump
Upper Slew Speed rpm
Max. Dig. Power: Bucket Kn Arm Kn
OPERATING RANGE: mm
TB014/016
Height
Rear Slew Radius Min. Ground Clearance
Traction Speed Km/h
Gradeability deg/%
Ground Pressure Kpa
Width x Height Operating Range up/down
Type Swing Angle RH/LH
Crawler (Track)
HYDRAULIC SYSTEM
OFF-SET DIG. FUNCTION
TRACTION SYSTEM: mm
DOZER BLADE: mm
PERFORMANCES
WEIGHT
Bucket Width
Rated Output Max. Torque
Displacement
Width
WEIGHT
Bucket Width
Rated Output Max. Torque
Displacement
Width
WEIGHT
Bucket Width
Rated Output Max. Torque
Displacement
Width
WEIGHT
Bucket Width
Rated Output Max. Torque
Displacement
Width
WEIGHT: Kg Canopy Cab Canopy Cab MODEL TB014 TB016 TB014 TB016 TB014 TB016 MODEL MODEL
Machine Weight 1,410 1,525 1,500 1,615
Bucket Capa. M3
Bucket Width mm
Model
0.028(stuck) 0,038(heaped) 0.028(stuck) 0,038(heaped)
3TNE68-NTB 3TNE68-NTB 3CYL. 4CYCL
9 51 1.7 784 2.9 2.8 21
3CYL. 4CYCL 9
1,085 230 230
1,925 2,175 1,525 1,715
3,580 3,800 3,465 3,700
Variable(P1+P2)+Gear(P3) Variable(P1+P2)+Gear(P3)
18.1x2+17.7x1 16.4x2+10.1x1 16.4x2+10.1x1
19.6x2+17.7x1
33 33
Axial Piston 23 23
1,085 220 205
980x250 1,300x250 215/235 215/235
Boom Swing Boom Swing
Rubber/Steel Rubber/Steel
2.2
9 9
12.1 13.1
8.5 9 51 1.7 784 2.9 2.8 21
3,560 3,695 980(Fixed) 980/1,300(Adjustable)
2,260 2,295 2,260 2,295
Type
Rated Output Kw Max. Torque Nm Fuel Consumption l/h Displacement cc
Cool. Water Capa. l Lub Oil Capa. l Fuel Tank Capa. l
Width
Length (in transport) OVERALL DIMENSIONS: mm
BUCKET
DIESEL ENGINE (WATER-COOLED)2.4/4.6 2,545 2,440 2,700 2,575
3,580 3,460 3,730 3,590
26.4
50 /90 50 /75 50 /90 50 /75
24.9
TB014 and TB016
TB014
TB014
TB016
1380
855
1210 **
*3700(3755)
3560(3615)
250
300
1195
230980
1030
2295
220
1015
520
445
75°
50° R1085
980
R1160
R1365
R1295
1925
(213
5)34
60(3
570)
2440
(255
5)15
25(1
690)
1440(1490)
365
2430(2520)
3465(3660)
3580(3765)
215
235
365
**
440 440
30/58 30/58
1,160/995 1,200/1,000525/445 520/445525/445 520/445
OrbitOrbit
Orbit
(Canopy/Cab,Rubber Tracked,Breaker Pipings Standard)(Steel Tracked: Option)
OPERATING RANGE:mm FULL HYDRAULIC COMPACT EXCAVATOR
Machine Weight:1410kg Machine Weight:1500kg
WORLD CREATOR OF COMPACT EXCAVATOR
TAKEUCHI MFG.CO.,LTD.205-3,Uwadaira,Sakaki-machi,Hanisina-gun,
Nagano 389-0605,Japan
Phone 0268(81)1112
Telefax 0268(81)1121
Murakami Factory
Togura Factory
Sakaki Factory
In accordance with our established policy of constant improvement, we reserve the right to amend this specification at any time without notice.Printed in Japan. CAT 9902050
(Long Arm)
Excluding Tight Quater and Electric Type Excavator
TB016
TB014 and TB016
The new model TB014 and TB016 excavators are the end result of years of research, field testing, customer evaluation and product refinement. Designed and engineered from the "ground up" with the latest in compact equipment technology, they firmly establish new standards for excavator performance, reliability, efficiency and ease of operation.
T A K E U C H I . . . . . L e a d i n g t h e W a y i n C o m p a c t E x c a v a t o r s TB014 and TB016
*Double-flanged track rollers provide increased roller/rail contact. Stress on the rail is more evenly distributed for longer undercarriage life and the risk of track run-off is reduced when operating on slopes.
Operator Comfort
*Streamlineddesign for improved operator visibility and operation in the most confined areas.
*Fully adjustable suspension seat provides for long days of productive work with minimal operator fatigue.
*New series diesel engines significantly reduce noise emission levels for minima l disturbance in urban areas and comply with the most stringent Worldwide exhaust emission standards.
*Variable displacement,axial piston,hydraulic pumps enable system flows and pressures to vary according to the load placed on the hydraulic system. The hydraulic system puts to work all of the available engine horsepower for maximum operating efficiency. The optimal combination of high digging forces and fast cycle times are continuously adjusted according to the variable digging loads encountered by the excavators.
Environmental Sensitivity*Improved simultaneous operation of the boom and bucket decrease cycle times. There is no reduction in operating speed as the machine is slewed away from and back to the trench.
14°
27°
*Bucket cylinder and auxiliary circuit hoses are routed through the arm to virtually eliminate hose abrasion from narrow trench walls and debris.
*Front attachment hoses are routed through the boom bracket for improved operator visibility and reduced exposure to external damage.
TB014
Ease of Operation*The new TB014 and TB016 excavators retain the standard features which have proven so popular on Takeuchi equipment in the past - features like auxiliary hydraulics, and servo controls. All of which are designed in a compact size for confined area operation.
*The TB016 hydraulically adjustable track frame enables the excavator, when in the retracted position, to squeeze through narrow openings. In the wide position the excavator gains added stability for heavy excavating, over the side digging, attachment operation and work on uneven terrain. The advantages of two sizes of excavators in a single machine.
Safety
Double Flange Roller Single Flange Roller
TB014 and TB016
*Spring applied, hydraulically released disc type travel brakes are not subject to leak off or failure due to a broken hose which may occur with hydraulic counter balance valve type travel brakes. An important safety feature when the excavator is resting on a slope.
*Console safely lockouts disable the console mounted operating controls for safe entry and exit from the machine.
*A cast iron wrap around counterweight protects the engine compartment from accidental damage when slewing in confined areas.
*Rear mounted work lights improve job site safety by visually alerting anyone entering the excavators work area.
*An emergency engine shutdown system on the model TB016 stops the engine in the event of an abnormal decrease in engine oil pressure. An important feature which helps eliminate catastrophic engine failures due to abusive or unobservant operators.
*The lengthened track frame on the model TB016 in combination with the hydraulically adjustable track frame width provides the most stable operating platform of any excavator in its class.
Options
*TKB71 HYDRAULIC BREAKER properly matched to the machine flow, pressure, and working capacity, enables the excavator to efficiently perform concrete breaking and demolition work.
*A CONTROLPATTERN SELECTOR VALVEprovides for quick change of operating control patterns to accommodate operator preferences.
*OPTIONALTRAVEL ALARM is available as an added safety precaution to audibly alert anyone in the excavators work area of any machine travel.
Safety
*LONGER STICK ARM/TELESCOPIC ARM provide longer digging reach according to working applications.
Serviceability
*The full opening engine hood, remote grease fitting and optimal layout of all filter and fluid check points provide quick ground level access to all maintenance items. What is easy to service will be serviced.
*HEAVY DUTY DOZER BLADE
provide for backfilling, machine stability and grading.
GA
(ISO)37
1021
35
2680
1690
2520
3660
3765
2545
2740
1435
4070
2620
3035
2215
25804140
4230
2910
1525
3755
2170
2725
1775
2490
3705
3810
2735
2910
146538
7523
75
2845
1910
260038903990
2665
2860
1435
Telescopic Arm / Fully Extended ArmFully Rettacted Arm
TB014:Long Arm
TB016:Long Arm
TB016 TB016
TB016 CabLong Arm
TB016 Canopy Long Arm
OPERATING RANGE:mm
TB014
TB016