TB 221 PHB MANET GB.qxd:TB 221 PHB MANET...

Technical manual for ordering and installation

Single-point fixingsfor interior applications

MANET

Product discription4 – 5

MANETCONCEPT6 – 37

MANETCOMPACT Sets38 – 49

Installation tools /Accessories

50 – 52

4 10/07

DORMA MANET Glass design system

Today’s approach to officedesign tends to be generouslyappointed, open-plan layouts.One of the basic underlyingprinciples in this regard isthat, in order to be effectivein business, you need a clearview of everything that ishappening.Consequently, flexible glasspartitions and doors are be-coming the preferred solutionfor internal spatial division.Thanks to the flexible modu-larity of the system, DORMAMANET offers architects andspecifiers a free hand increative almost bespokedesign with space, visionand light as a foundation. The basic component is thesingle-point fixing which iscountersunk into the glassand provides for a perfectlyflush finish in all applications.In addition to the counter-sunk version, however, thesystem now also offers a new

alternative, i.e. whereby thesingle-point fixing is clam-ped to the glass surface.When using these mountingelements, glazing systems of 8 mm thickness as well asthe usual 10 and 12 mmthicknesses are available asstandard applications for sliding doors. Other glassthicknesses may also beavailable, and the installati-on of timber doors is like-wise possible. Design modi-fications enable the freecombination of various rollercarrier and track rail types.Further details can be foundin the relevant introductorypages. Adjustable angle connectorsprovide for reliable attach-ment to existing structuralcomponents or glass-to-glass combinations, with integra-ted pivoting and sliding doorelements complimenting thesystem.

Just as visually effective arethe MANET COMPACT stan-dardised sets from theDORMA MANET family.These facilitate single, fastplanning of the more popu-lar system types with 8, 10or 12 mm glass for doorsand 10 and 12 mm glass foroverpanels and sidelights.The MANET COMPACT sli-ding door sets will be deli-vered with roller carrier inCLASSIC design.

Optional accessories areavailable for increaseddesign variety within theindividual sets.

The system componentscome with numerous adjust-ment possibilities in order toensure problem-free installa-tion of the sliding, doubleaction or single action doors.Wall abutment profiles /connectors (for attaching the overpanel and sidelightscreens to the existing structure) may need to be provided.

MANET CONCEPT MANET COMPACT Sets

09/10 5

All the elements includingthe pull handles are availablein an elegant stainless steelfinish (AISI 303). In applications involving corrosive atmospheres, manyfittings are also available instainless steel AISI 316L.

Needless to say, all DORMAsystems are protected by proprietary rights worldwide. We will be glad to provide youwith information concerningrelevant patents, e.g.PCT/EP03/04299,PCT/EP01/04255 etc. onapplication.

Konstruktiver Glasbau e.V.

FachverbandKonstruktiver Glasbau e.V.

Fachverband

Awarded with the design prizered dot 2002

DORMA MANET CONCEPT

Content

Single-point fixing 8

Connection system 10

Pivoting door system 14

Sliding door system 22

Pull handles/door knobs 34

MANETCONCEPT

8 11/06

Threaded rod M8 with small head (eg DIN 6912). Length and type to suit wallplug.

3-dimensionaladjustment

1

23

Wallplug on site to suit wall construction.

Installation and adjustment

Transfer the drilling points from the installationdrawing to the wall.Drill anchor holes for wallplugs.Undo adjustment fastenerand secure to the wall. Only lightly tighten fastenerso that it can still bemoved. Mount the fixing and washer and fit the glass. Undo the adjustmentfastener and then secure infinal position.Align single-point fixingsand secure with grub screw.Fit tapered nut and clam-ping ring and tighten withspecial wrench (tighteningtorque 15 Nm).Clip on covers.

45

6

Post-installation adjustment of ± 2 mm horizontally andvertically by rotating the oblong hole.

Aperture for post-installationadjustment of screw

Adjustment screwallows offset fromwall to be altereddepending on typeof fitting.

1 Clip-on cover

2 Pin internal thread

3 Conical sleeve

4 Gasket

5 Fixing

6 Adjustment screw

Components

MANET CONCEPT Single-point fixing

The basic component withinthe MANET system is thesingle-point fixing. Ratherthan cylindrical bore in theglass, this has a taperedcountersunk bore for a perfectseated fit to the glass. Thesegive a flush finish of thesingle-point fixing in all appli-cations.The three-dimensional adjus-tability incorporated withinthe fitting ensures ideal com-pensation for structural anddrilling tolerances.Constraint-free transmissionof all the forces acting on theglass to the substructure isalso ensured.

Single-point fixing series S32/35

Type and ordering information

01/10 99

Ø 3

2

Ø 3

5

adjustable

Glass-thickness

Glass-thickness

Glass-thickness8,5-11,5

Ø 3

2

Ø 3

5adjustable

11,5-14,5

Ø 3

2

Ø 3

5

adjustable

14,5-22

Ø 3

2

Ø 3

5

6

not adjustable

Glass-thickness

Single-point fixing,Glass/Wall, Glass/Wall offsetadjustable 8.5 -11.5 mmComplete fitting

Glass thickness 8 / 10 mm:countersunk 8.29.200.700.99AISI 316L8.29.600.700.99clamping disc8.29.700.700.99AISI 316L8.29.650.700.99Glass thickness 12 mm:countersunk 8.29.210.700.99AISI 316L8.29.605.700.99clamping disc8.29.705.700.99AISI 316L8.29.655.700.99Glass thickness 13,5 mm:countersunk 8.29.240.700.99AISI 316L8.29.610.700.99clamping disc8.29.710.700.99AISI 316L8.29.660.700.99Glass thickness 15 mm:countersunk8.29.244.700.99AISI 316L8.29.615.700.99clamping disc8.29.715.700.99AISI 316L8.29.665.700.99Glass thickness 17,5 mm:countersunk 8.29.248.700.99AISI 316L8.29.620.700.99clamping disc8.29.720.700.99AISI 316L8.29.670.700.99

Single-point fixing,Glass/Wall, Glass/Wall offsetadjustable 11.5 -14.5 mmComplete fitting


Single-point fixing,Glass/Wall, Glass/Wall offsetadjustable 14.5 - 22 mmComplete fitting


Single-point fixing,Glass/Wall, Glass/Wall offset6 mm, not adjustable Complete fitting


10 01/10

MANET CONCEPT Connection system

The system approach is verymuch in evidence in the caseof the interconnecting com-ponents. Elements such asclamping and angle connec-tors of various designs andalso interconnecting fastenersof various lengths can be combined in order to attachglass of different thicknessesat any required angle to thefloor, to ceilings, to walls andto plinth supports.Single-point fixings flush with the glass are also usedfor this interconnection andglass-to-glass system. Tolerances are compensatedby sloted holes in the inter-connecting fasteners.

1 2

3 4

3 ColumnCeiling/floor fixingArt. No. 8.21.146.700.99

4 Clamping connectorGlass thickness 8 -12 mmArt. No. 8.29.149.700.99

5Connecting rod

Length 52.5 mmArt. No. 8.21.355.700.99

Length 60 mmArt. No. 8.21.356.700.99

Length 82 mmArt. No. 8.21.357.700.99

Length 103 mmArt. No. 8.21.358.700.99

103 mm

82 mm

60 mm

52.5 mm

5

Ordering information

1 Pivoting glass clampinclusive screw setsfor 8 - 12, 13.5 - 17.5 and17.5 - 21.5 mm glasscountersunk8.29.160.700.99do., clamping disc8.29.165.700.99

2 Pivoting wall fixingArt. No. 8.21.141.700.99

Connection system

11/06 11

6

adjustable via oblong hole

1 2

5

87 Components and assembly of the glass fixing

3 4

1 Clip-on cover2 Connecting bolt3 Conical collar4 Conical sleeve5 Gasket6 Pivoting clamp 7 Connecting bolt8 Connecting rod

to suit length9 Connecting bolt

10 Pivoting clamp11 Fixing plate


Complete fitting glass/glass8-12 mm glass thickness

With connecting rod52.5 mmArt. No.8.29.120.700.99

With connecting rod60 mmArt. No.8.29.122.700.99

With connecting rod82 mmArt. No. 8.29.125.700.99


A

A

A

Connecting rod

52.5 / 60 / 82 / 103 mm

ø20

28ø

36

ø3

2Glass thickness

Gla

ss t

hick

ness

Components

Complete fitting glass /wall8-12 mm glass thickness

With connecting rod52.5 mmArt. No. 8.29.139.700.99



B

C

B

B

Connecting rod52.5 / 60 / 82 mm

Connecting rodsee page 10

Connectingrodsee page 10

Components and assembly of the wall fixing

Threaded rod M8 withsmall head(e.g. DIN 6912).Length and type to suitwallplug.


grub screw


Wallplug on site to suitwall construction.

ø20

ø 3

632.5

9

10 11

8

Wall

90°-180° Glass/Wall

Glass/Glass

Connector for double panel

Glass/Wall

90°-180° Glass/Glass

C

C

120

3

Glass Glass

ø 3

2

Complete fittingConnectorfor glass thickness8 -12 mm

AISI 303Art. No. 8.29.148.700.99

AISI 316LArt. No. 8.29.368.700.99

Glass thickness

Connection system

12 01/10

MANET CONCEPT Connection system


AClamping connector

Complete fittingGlass thickness 8 -12 mmArt. No. 8.29.149.700.99

BCorner connector 90°Glass/ceiling, Glass/floorconnection

Complete fittingGlass thickness 8 -12 mm(only supporting function) Art. No. 8.29.145.700.99

CCeiling fixing(bearing function)

Complete fittingGlass thickness 8 -12 mmcountersunkArt. No. 8.29.337.700.99AISI 316LArt. No. 8.29.339.700.99

clamping discArt. No. 8.29.338.700.99AISI 316LArt. No. 8.29.340.700.99

1Connecting bolt

2Pivoting clamp

3Connecting bolt

4Gasket

5Pivoting clamp

6Fixing plate

7Column

A

A

B

B

C

C

28 28

ø3

6

ø2

0

Components / Installation


1 2

3 4

4 5

Connecting rodor steel cable

6

7


Grub screw

Hanging glass fromthe ceiling is permis-sible where there isother support for theglass sheet.

Wallplug onsite to suitwall con-struction.

Threaded rod M8 with small head (eg DIN 6912).Length and type to suit wallplug.

Components

Fixing with cheeseheadscrewDIN 7984 M10 x..., or oval-head wood screwDIN 7996 M8 x... depending on ceilingfixing requirements andwallplug type (by others)

Height adjust-mentvia grub screw

with clampingdisc

Single-pointcountersunk

Single-point fixing clamping disc

Single-point fixing countersunk

Clip-on cover

Connection system

11/06 13

Dimensions in mm

Glass preparation with a tolerance of max. ± 0.3 mmis recommended.

Ensure compliance with minimum glass/bore clearances as per glassmanufacturer recommenda-tions

±0

.3

Gla

ss t

hick

ness

For ESG and VSG out of ESG.

Clamping connector

Corner connectorsGlass/Glass

Glass/Wall

max

. 800

±0.

3

max. 800 ±0.3

90°

3

3

Dim

ensi

on A

Dimension A

Dimension B

Dimension B

Connecting rod

Connecting rod

90°95°

100°105°110°115°120°125°130°135°180°

Angle A/B

52.5

A/B

60

A/B

82 103

Length of Connecting rod

75706662595552494744

80757167636056545148

96908581777369666360

A/B

50

Dimensions for 10 mm glassthickness (consider variants for other glass thicknesses).

90°Angle A/B

52.5

A/B

60

A/B

82

Length of Connecting rod

67/65 72/70 87.5/86

Dimensions for 10 mm glassthickness (consider variantsfor other glass thicknesses).

Plan view

Angle

150

60

28

28

28

28

32

.5

28

3

72

Countersunk bore for countersunk single-pointfixings

Recommended centres forfixed glazing element

Cylindrical bore for clamping disc single-point fixings

Cyl

indr

ical

bor

e

Glass preparation for single-point fixings and corner connections

Corner connector glass/ceiling Corner connector glass/floor

Corner connectors Glass/Glass 90° -180°

Corner connectors Glass/Wall 90 -180°

Ceiling fixing (bearing)

90°

ø 32+0.2

ø 26

Gla

ss t

hick

ness

ø 26+0.2

Ø1

5

28

3

AngleDim

ensi

on A

Dimension B

Wall

75

28

75

KS

Floor

Ceiling 41.5

Glass thickness

Vertically adjustment ± 2.5

65

72

3

5

Ceiling

67

Connecting rod

3- 0

.2

MANET CONCEPT Pivoting door system

MANET pivoting doors can beinstalled in both glass partiti-ons and masonry openings.They come as both single anddouble-action swing doors witha maximum weight of 100 kgand a maximum leaf width of1200 mm. All the single-point fixings aredesigned for clip-on covers foreasier installation. Other com-ponents include the bottompivot bearing, top pivot fittingswith bearing spigot or eccen-tric bushing and also overpa-nel/sidelight connectors. As a result, there are almostunlimited possibilities for inte-grating frameless swing doorsboth in masonry openings –with or without overpanels and

sidelights – and in glass parti-tion constructions retained bysingle-point fixings. The pivoting door system hasundergone a number of impro-vements. Whether with a full-length pivot rod or a pair ofshorter pivot rods, the topbearing socket is now locatedin the fitting on the door leaf.This means that connection tothe ceiling, lintel or transomcan now be provided in theform of the standard PT25 toppivot spigot from the DORMArange.The door assemblies can beequipped with floor springssuch as the DORMA BTS 75V,and corner locks are naturallyalso available.

Pivoting door system

14 01/10


A Overpanel/sidelight connector

complete fittingfor 10/12 mm glasscountersunkArt. No. 8.29.330.700.99AISI 316LArt. No. 8.29.362.700.99clamping discArt. No. 8.29.356.700.99AISI 316LArt. No. 8.29.371.700.99

B Pivot bearing for overpanel and ceiling connection

Art. No. 8.21.310.700.99AISI 316LArt. No. 8.21.350.700.99

11

5 76

18,5

18,5

A B

Pivot bearing withfull-length pivot rod

Pivot bearing withpivot rod pairshort type

Pivot bearing withpivot rod pairshort type with intermediate tube

Glass thickness

01/10 15

Components for pivoting door system

C Pivot rod,drilled, fixed lengthArt. No 8.21.551.700.99AISI 316LArt. No 8.21.552.700.99

Single-point fixing,countersunk, fixed 1

for 10/12 mm glassArt. No 8.29.460.700.99AISI 316LArt. No 8.29.461.700.99for 13,5 -15,5 mm GlassArt. No 8.29.450.700.99clamping disc, fixed 1

for 10/12 mm glassArt. No 8.29.465.700.99AISI 316LArt. No 8.29.466.700.99

Single-point fixing,countersunk, centring2for 10/12 mm glassArt. No 8.29.462.700.99AISI 316LArt. No 8.29.463.700.99for 13,5 -15,5 mm GlassArt. No 8.29.455.700.99clamping disc, centring2for 10/12 mm glassArt. No 8.29.467.700.99AISI 316LArt. No 8.29.468.700.99

Pivot rod set, short typetop/bottom,incl. 4 single-point fixingscountersunkArt. No 8.29.546.700.99AISI 316LArt. No 8.29.547.700.99clamping discArt. No 8.29.560.700.99AISI 316LArt. No 8.29.561.700.99do. for intermediate tubecountersunkArt. No 8.29.548.700.99AISI 316LArt. No 8.29.549.700.99clamping discArt. No 8.29.562.700.99AISI 316LArt. No 8.29.563.700.99

Intermediate tubefixed length up to 2 mArt. No. 8.29.555.700.99AISI 316LArt. No. 8.29.557.700.99

D Pivot bearing for DORMA BTS (max. 4 EN) /floor pivotArt. No. 8.29.545.700.99AISI 316LArt. No. 8.29.550.700.99


Glassthickness

C

1

2

2

2

D

83

89

76

18.5

18.5

ø 25

ø32

ø32

inte

rmed

iate

tub

e

Adjustment+2,5

Bottom pivotbearing

Pivot poleAdjustment-2,5

Zero position



PT 25 top pivotfor ceiling connection,15 mm Ø, with plugArt. No. 8.01.115.000.99

Pivot bearing for RTSArt. No. 8.29.314.700.99

Pivot pole, drilled, fixed length, for RTS pivot bearing 21.314Art. No. 8.29.553.700.99

Pivot bearing locationfor overpanelfor 8 -12 mm glass,countersunkArt. No. 8.29.333.700.99AISI 316LArt. No. 8.29.353.700.99clamping discArt. No. 8.29.355.700.99AISI 316LArt. No. 8.29.370.700.99

Pivot bearing for installation to ceilingadjustablefor 8 -12 mm glass,Art. No. 8.21.319.700.99AISI 316LArt. No. 8.21.318.700.99

Pivot bearing fittingfor overpanel with cylindrical bore for rod for 8 -12 mm glass,


Glassthickness

Glassthickness

11

5

60

ø25

40

18.5

Glassthickness

11

5

18.5

M8


46

3

105

76

16 01/10

Floor pivotArt. No. 8.01.106.700.99

Pivot bearing for wet roomsArt. No. 8.29.540.700.99

32.5

15

92

76

18.5

76

18.5

11/06 17


Overpanel/sidelight connector for glass fixing90° offset,with pivot bearing location,complete fittingfor 10 and 12 mm glass,A right handArt. No. 8.29.331.700.99B left handArt. No. 8.29.332.700.99

Overpanel/sidelight connector for wall fixing90° offset,with pivot bearing location,complete fittingfor 10 and 12 mm glass,C right handArt. No. 8.29.328.700.99D left handArt. No. 8.29.329.700.99

Overpanel/sidelight connector for wall fixing90° offset,complete fittingfor 10 and 12 mm glass,E right handArt. No. 8.29.326.700.99F left handArt. No. 8.29.327.700.99


A C

A B

C D

E F

E

F B

D

Glassthickness

12

01

20

12

0

73 73.5

73.5

73.5

73.5

11

5

70 70 703

73

7033

18.5

18.5

3 70 703 3



Stop for pivoting doorwith ceiling mountingArt. No. 8.21.334.700.99

Stop at overpanel(inside/outside)for 10 and 12 mm glass,Art. No. 8.29.335.700.99


Ceiling

5

40

73 40

39

30

30


18 11/06

Glass-thickness

Glass-thickness

12

04

03

Glass-thickness

12

04

03

Glass-thickness

12

04

0

3

Overpanel-sidelight connectionfor 10/12 mm glass,countersunkArt. No. 8.29.320.700.99AISI 316LArt. No. 8.29.360.700.99clamping discArt. No. 8.29.357.700.99AISI 316LArt. No. 8.29.372.700.99

Overpanel-sidelight connectionwith stop insidefor 10/12 mm glass,Art. No. 8.29.322.700.99

Overpanel-sidelight connectionwith stop outsidefor 10/12 mm glass,Art. No. 8.29.325.700.99

24.5

01/10 19


Ordering informationOrdering information

40

31

94

Wall

Wall

Floor

Glass

Glass

Wall Glass

ø 20

ø 20

Floor

Floor

Floor

Glass thickness

65

ø 40

1221

94

32

ø 25

ø 15.5

73

7

7

3

65

65

ø5

5ø

55

11

3

28.5

A

B

C

Corner lock for 8 -12 mm glass,Art. No. 8.21.448.700.99

Corner lock with profile cylinder rose oninside for 8 -12 mm glass,Art. No. 8.21.449.700.99

Dead lock for KABAwith rose on insidefor 8 - 12 mm glassArt. No. 8.21.450.000.99

Profile cylinderfor corner lockArt. No. 8.14.206.000.99

A Eccentric bushingArt. No. 8.05.194.000.99B Bushing, plasticsArt. No. 8.00.110.133.32

C Strike plateArt. No. 8.05.190.000.99

Stop for pivoting doorfloor mountingArt. No. 8.29.950.700.99

Stop for pivoting doorwall mounting, shortArt. No. 8.29.951.700.99

Stop for pivoting doorwall mounting, longArt. No. 8.29.952.700.99


20 11/06

X

588

11


Detail A

Detail B

Detail C

Detail Bto wall

Detail A to wall

Detail A to sidelight

Detail Bto glass wall

Detail Cto wall

Countersunkholes

Glass thickness

X

X X

3

X

3-0.2

Y

Y

3

Y

70

3 3

70 70

Y

ø 2

61

13

11

33 3

90

°ø

32

+0

.2

11

31

20

4040

40

12

0

5016

0

11

3

Glass thicknessmm

10/12

13.5 -15.5

The gap and distance dimensions recommended byDORMA are indicated in theadjacent table.

Connection

SidelightWall

SidelightWall

Y

65

62

Gap

Glass preparation for pivoting door system

Detail D

Detail D

Detail E

Detail E with stop

Detail EDetail B

BTS

Glass

67

40 40

Y

Y

67 50

X

50

3

3 3

3

67 50

3

12

0

12

0

12

0

11

3

11

3X1

±0

.3

X2 ±

0.3

X3 ±

0.3

Ove

rall

leng

th o

f pi

vot

rod

= D

oor

heig

ht -

54

mm

89

18.5

24

7

50

3

3 3

40

11/06 21

Detail E

FFL

22 07/06

MANET CONCEPT Sliding door system

Different anti-jumpdevices for solid andtubular track rails

Roller carrier TREND


Roller carrier CLASSIC


Sliding door systemThe MANET sliding doorsystem is ideal as an elegantaddition complementing high-style interior concepts.Its main components take theform of a solid track rail andthe roller carrier. Whether youprefer the TREND or CLASSICversions, both can be combi-ned with the solid track or atubular track by simply repla-cing the anti-jump device.The range includes both glass-flush and proud single-pointfixings. The sliding doorsystem allows plenty of scopefor individual ideas.

In addition to the standardversions incorporated in toughened glass partitions or face-fixed on masonry openings, this hardwaresystem can also be used toconstruct curved sliding doors,biparting sliding doors andparallel sliding doors. The fittings are designed for a door weight of max. 120 kg. Mechanical stops that can bepositioned on the track railensure that the door traveldistance is effectively limited.

Glass connection with drilled solid track rails

Glass connection with clamp fixing and tubes

Roller carrier

Roller carrier TRENDincl. anti-jump device(both variants)

only lug with rollerArt. No. 8.29.414.700.99


07/07 23

55

55

20

8

55

55

20

5

Roller carrier CLASSICincl. anti-jump device(both variants)

only lug with rollerArt. No. 8.29.400.700.99AISI 316LArt. No. 8.29.401.700.99

2 piece single-point fixingfor roller carrier:

countersunk 8 -12mm glassArt. No. 8.29.430.700.99AISI 316LArt. No. 8.29.431.700.99

clamping disc 8-12mm glassArt. No. 8.29.432.700.99AISI 316LArt. No. 8.29.433.700.99

countersunk for 13.5 -17.5 mm glassArt. No. 8.29.435.700.99

countersunk f. 19 mm glassArt. No. 8.29.437.700.99



24 11/06


Roller carrier single point fixings for timber doors

2 pieces single point fixingfor roller carrier: TREND / CLASSICcountersunkor clamping disc

see table


mm

20 - 30

35 - 40

Single-point fixing (2 pcs)

for roller carrier

Art. No.

countersunk clamping disc

29.510 29.520

Single-point fixing fixed

for track to glass

10/12 mm, see page 26

Art. No.


29.460 29.465

29.530 29.535

Single-point fixing cent-

ring for track to glass

10/12 mm, see page 26

Art. No.


29.462 29.467

29.531 29.536

Flange fixingtrack to wallsee page 27

Art. No.

21.346

21.412

max.door

weight

kg

120

100

Insertsolid track rail

Insertsliding track tube

For

solid

tra

ck r

ail

mm

18.5

35

X Z

mm

20 - 30

35 - 40

Single-point fixing (2 pcs)

for roller carrier

Art. No.


29.510 29.520

Clamp fixing for track to wallsee page 29

Art. No.

21.153

21.157

Clamp fixing for track to glasssee page 29

Art. No.countersunk clamping disc

29.171 29.172

29.518 29.519

max.door

weight

kg

120

100

For

slid

ing

trac

k tu

be

mm

18.5

35

X Z

60

60

Glass thickness

Z

X

Z

Glass thickness

15 15

55

Height adjustment -2.5

Height adjustment -2.5

55

37 37

35

28

35

28

X

11/06 25

Solid track rail Supply and installationTrack supply and installationThe track rail for the slidingdoor is pre-fabricated accor-ding to the customer’s drawingand supplied together with theglass or wall brackets orderedfor the application concerned.

Fixing screws for wall installation by othersOf decisive importance for pre-fabrication and fixing to glasspartitions is that the mountingpoints coincide with the holesdrilled in the glass. The length-wise tolerances should not begreater than +/- 0.3 mm.

For rail support intervals onthe glass wall or masonry,see fixing point intervalrecommendations per thetable.

Wall/single-pointfixing clearance whenusing the wallconnec-tor (depends on stop-per position).

Caution! Ensure that the stops/single-point fixings arepositioned at locations appropriate to the width of the

door.

G = Fixing point to glassW = Fixing point to wall

K = ConnectionWK = Angle-connection

Required dimensions for the track production

G

see table 50

100 see table

see table

Track length

max. 5000 with connector

* Note!Ensure that track joints and glass joints do not coincide

max. 5000 with angle-connector

max. 5000 with connector

3

3

min. 80

min

. 8

0

37.5

37

.5

18

.5

18.5

G W W

G

G

G G GG

K*

WK

G G G

100 100see table

see table see table see table

1900

2000

2100

2200

2300

2400

2500

700 800 900 1000 1100 1200 1300 1400Door width in mm

Glass thickn. mm

Doorheightin mm 8

770

750

730

710

690

680

660

10

710

700

680

660

640

630

610

12

670

650

640

620

610

590

580

Glass thickn. mm8

770

750

730

710

700

680

670

12

670

660

640

620

610

590

580

Glass thickn. mm8

770

750

730

710

700

680

670

10

710

690

680

660

650

630

620

12

670

650

640

620

610

590

580

Glass thickn. mm8

760

740

730

710

690

680

660

10

710

690

670

660

640

630

620

12

670

650

630

620

600

590

580

Glass thickn. mm8

760

740

720

700

690

670

660

10

700

680

670

650

640

620

610

12

660

640

630

610

600

590

580

Glass thickn. mm8

750

730

710

700

680

670

650

10

700

680

660

650

630

620

610

12

650

640

620

610

600

580

570

Glass thickn. mm8

740

720

710

690

680

660

650

10

690

670

660

640

630

610

600

12

650

630

620

600

590

580

570

Glass thickn. mm8

730

720

700

680

670

660

640

10

680

660

650

630

620

610

600

12

640

630

610

600

580

-

-

10

720

700

680

660

650

630

620

Recommended distance of the track fixing points


Components for sliding door system Solid track rail and accessories


Recommended distance of the fixing points see page 25 *for X see page 24

up to 6 m*Solid track rail

ø2

5

The track rail isprefabricated percustomer specifi-cations/drawingwith all the neces-sary drill holesalready provided.

37.5

37

.5Threaded rod

M5 x 6

Angle connection 90 -180°

*max. single length 5 mby coupling

A for *X = 20 - 30 mmSingle-point fixing, countersunk, fixedfor 10/12 mm glass


for 13.5 -15.5 mm glassArt. No. 8.29.450.700.99for 17.5 mm glassArt. No. 8.29.451.700.99

clamping disc, fixedfor 10/12 mm glassArt. No. 8.29.465.700.99AISI 316LArt. No. 8.29.466.700.99countersunk, centringfor 10/12 mm glass

Art. No. 8.29.462.700.99AISI 316LArt. No. 8.29.463.700.99for 13.5 -15.5 mm glassArt. No. 8.29.455.700.99for 17.5 mm glassArt. No. 8.29.456.700.99

clamping disc, centringfor 10/12 mm glass


B for *X = 35 - 40 mmSingle-point fixing, countersunk, fixedfor 10/12 mm glass

Art. No. 8.29.530.700.99

clamping disc, fixedfor 10/12 mm GlassArt. No. 8.29.535.700.99

countersunk, centringfor 10/12 mm glass

Art. No. 8.29.531.700.99

clamping disc, centringfor 10/12 mm glass

Art. No. 8.29.536.700.99

Track, drilled

for fixing on glass

fixed length up to 6 mArt. No. 8.21.405.700.99AISI 316LArt. No. 8.21.456.700.99

for fixing on wallup to 6 mArt. No. 8.21.406.700.99AISI 316LArt. No. 8.21.457.700.99

Track, undrilledfor fixing with clampbracketsfixed length up to 6 m8.21.407.700.99do. (AISI 316L)8.21.458.700.99

Connectorsoffset for tracks 90 -180°Art. No. 8.21.442.700.99do. (AISI 316L)8.21.443.700.99

Single point fixing for fixing thetrack to glass

Glass thickness

18.5

ø2

5

26 01/10

A

Glass thickness

35

ø2

5

B

Components for sliding door system Solid track rail and accessories

Flange for fixing the track to wallArt. No. 8.21.346.700.99AISI 316LArt. No. 8.21.347.700.99

Flange for fixing the track to wall, adjustableArt. No. 8.21.412.700.99

Fixing for double trackArt. No. 8.21.170.700.99

Ceiling retainer for track

carrying functionArt. No. 8.21.315.700.99


Flange for fixing the track to wall

18.5

18.5

10/12

35

ø 65

11

0ø

20

ø5

5

ø 25

ø 25

29

ø2

56

0ø

25

Flange for fixing the track to wall, adjustable

Flange for fixing a double track

Note: Min. distanceglass to wall 32 mm

2-dimensional adjustmentvia oblong hole

Recommended distance of the fixing points see page 25

Adjust-ment + 5 mm

11/06 27

28 01/10


Components for sliding door system Tube and accessories


3 m/6 m Sliding track tubeincl. end plugsstock length 3 mArt. No. 8.21.527.700.99AISI 316LArt. No. 8.21.530.700.99

Fixed length up to 6 mArt. No. 8.21.436.700.99AISI 316LArt. No. 8.21.532.700.99

Sliding track tubebent, incl. end plugs

max. curve length 2.6 mArt. No. 8.21.409.700.99

max. curve length 5.6 mArt. No. 8.21.413.700.99

Curve length

r =

min

.600

mm

ø2

1

ø2

5

40

ø2

1

40

40

Angled connection for track tube,90°-180°Art. No. 8.21.535.700.99AISI 316LArt. No. 8.21.536.700.99

Angle connectionfor sliding track tubeArt. No. 8.29.506.700.99

Thread insertfor sliding track tubeArt. No. 8.29.505.700.99

see table

Recommended distance of thetrack fixing points

1900

2000

2100

2200

2300

2400

2500

700 800 900 1000 1100 1200 1300 1400

Door width in mm

Glass thickn. mm

Doorheightin mm

8

350

350

350

350

350

350

350

10

350

350

350

350

350

350

350

12

350

350

350

350

350

350

350

Glass thickn. mm8

400

400

400

400

400

400

400

10

400

400

400

400

400

400

400

12

400

400

400

400

400

400

400

Glass thickn. mm8

450

450

450

450

450

450

450

10

450

450

450

450

450

450

450

12

450

450

450

450

450

450

450

Glass thickn. mm8

500

500

500

500

500

500

500

10

500

500

500

500

500

500

490

12

500

500

500

490

480

470

460

Glass thickn. mm8

550

550

550

550

550

530

520

10

550

540

530

520

510

500

490

12

530

510

500

490

480

470

460

Glass thickn. mm8

600

580

570

550

540

530

520

10

550

540

530

510

500

490

480

12

520

510

500

480

470

460

450

Glass thickn. mm8

590

570

560

550

540

530

520

10

550

530

520

510

500

490

480

12

510

500

490

480

470

460

450

Glass thickn. mm8

580

570

560

540

530

520

510

10

540

530

520

500

490

480

470

12

510

500

490

470

460

-

-

37,5

37

,5

Threaded rodM5 x 6

Angle connection 90 -180°

Components for sliding door system Tube and accessories

01/10 29


Clamp fixingfor sliding track tube toglass, single-point fixingcountersunk for 10, 12 and 13.5 mm glassArt. No. 8.29.171.700.99AISI 316LArt. No. 8.29.181.700.99

single-point fixing, clamping discfor 10, 12 and 13.5 mm glassArt. No. 8.29.172.700.99AISI 316LArt. No. 8.29.182.700.99

16 mm extendedsingle-point fixing, countersunk for 10, 12 and 13.5 mm glassArt. No. 8.29.518.700.99

single-point fixing, clamping discfor 10, 12 and 13.5 mm glassArt. No. 8.29.519.700.99

Clamp fixingfor sliding track tube to wallArt. No. 8.21.153.700.99AISI 316LArt. No. 8.21.163.700.99

Clamp fixingfor sliding track tube to wall16 mm extended Art. No. 8.21.157.700.99AISI 316LArt. No. 8.21.158.700.99

ø 25

18.5

Glass thickness

ø 25

35

Glass thickness

Ceiling retainer for sliding track tube,carrying functionArt. No. 8.21.316.700.99

18,5

35

ø 25

ø 25

ø 65

11

0

ø 25

ø 2526

Glass preparation for sliding door system


Sliding door with two sidelights and overpanel

Sliding door with sidelight and overpanel

Sliding door to wall

Detail A Detail B

Detail C

Sliding doorWall

Wall

Overpanel

Sidelight

Sliding door Wall

Sliding door

Overpanel

SidelightSidelight

Detail D

Detail E Detail D

30 11/06

Glass preparation for sliding door system

Sliding door with tube and clamp fixing

Sliding door with solid track rail

Detail D

27

.5

27.

52

7.5

18.5

35

60

50

55

27

.5

18.5

35

60

50

55

40

Detail C

Detail E

Detail A Detail B

3 -0.2

Glass thickness Glass thickness

ø2

6

ø3

2+

0.2

ø2

6

90

°

143 143

143143

glass edge protectionon site

143

100

3

50 50

40

40

3

50

4040

Countersunkbore for coun-tersunk single-point fixings

Cylindrical borefor clamping disc single-point fixings

Dimensional data should be regardedexclusively as recommended values. Please remember when designingyour system that the positions of thestops and point fixings must not vertically coincide.

For spacing/interval recommendati-ons when drilling the track holes,and for requisite dimensions forfixing the track rail,please refer to the table entitled“Recommended distance of the trackfixing points”.

11/06 31

Components for sliding door system



Door stopleft handArt. No. 8.29.425.700.99

AISI 316LArt. No. 8.29.427.700.99

right handArt. No. 8.29.426.700.99

AISI 316LArt. No. 8.29.428.700.99

Roller to glassfor 8 -12 mm glass,countersunkArt. No. 8.29.494.700.99

clamping discArt. No. 8.29.495.700.99

Anti-jump devicefor roller to glassfor 8 -12 mm glass,countersunkArt. No. 8.29.497.700.99

clamping discArt. No. 8.29.498.700.99

Door stopfor roller to glassArt. No. 8.29.493.700.99AISI 316LArt. No. 8.29.483.700.99

Wall fixing for tube / solid track railArt. No. 8.29.445.700.99AISI 316LArt. No. 8.29.446.700.99

Door steady,to prevent glass edges of double sliding doors bumping into each otherArt. No. 8.29.420.000.99

Please order for details forglass preparations ourdetail sheet 29-044-B.

stop is usable left hand andright hand

left hand

right hand

56

207

0

50

35

ø3

5

ø2

5

32 01/10

6

Components for sliding door system


Aluminium brush profile

similar satin stainless steel

for 8 mm glassstock length 3 mArt. No. 8.07.402.113.99

fixed length up to 6 mArt. No. 8.07.403.113.99

for 10/12 mm glassstock length 3 mArt. No. 8.07.400.113.99

fixed length up to 6 mArt. No. 8.07.401.113.99

Sliding door lock with ratchet brace

for 8/10/12 mm glass

Art. No. 8.21.446.700.99AISI 316L

Guide rail with brush sealsapplicable for 8/10/12 mm glass

aluminium mill finishedfixed length up to 6 mArt. No. 8.21.431.100.99

stock length 3 mArt. No. 8.21.432.100.99

Floor guideclamping disc,applicable for 8/13.5 mm glassArt. No. 8.07.316.000.99

13.5

37

.5

15.5for 8 mm glass

13.5for 10 mm glass

11.5for 12 mm glass

ø3

8

ø4

87

5

24

30

15

15

01/10 33

50

23

,5

10

30

MANET CONCEPT Pull handle /knob system

The pull handle/knob systemis designed for glass of 8, 10and 12 mm thickness.The pull handles can be fixedto both sliding and pivoting(swing) doors on one faceusing the appropriate connec-tors or on both faces bythrough-bolting (back-to-backarrangement). The single-point fixings and throughbolts are included as standardequipment in the scope ofsupply.The pull handles can be fittedhorizontally, vertically or in ahandrail arrangement.

Pull handles and door knobs

Pull handles with single-point fixings, countersunkfor 8/10/12 mm glass

Pull handle 350 mmwith 2 fixingsArt. No. 8.29.268.700.99AISI 316LArt. No. 8.29.269.700.99




Pull handles with clampingdisc single-point fixingsfor 8/10/12 mm glass






Single-point fixingcountersunk

Single-pointfixingclamping disc

Complete withsingle-point fixings

ø3

2

ø1

6

45.5ø 25

Glassthickness

35

0

15

0

52

0

52

0

52

0

12

40

17

60

72

0

34 11/06

Pull handles and door knobs

Pair of pull handles incl. connecting bolt for 8/10/12 mm glass

Pair of pull handles350 mm, with 2 fixingsArt. No. 8.21.267.700.99AISI 316LArt. No. 8.21.247.700.99





Door knob one side fixing for 8/10/12 mm glass

Door knob with single-pointfixing, countersunkArt. No. 8.21.422.700.99

Door knob with clamping disc single-point fixingsArt. No. 8.21.426.700.99

Door knob back-to-back for 8/10/12 mm glassArt. No. 8.21.423.700.99

01/10 35

Back to back handle bar,length 1225 mm, preparedfor 8 - 13.5 mm glass,1225 mm, with 2 fixings,complete with KESO 2000lockArt. No. 8.21.279.700.99

Complete incl.connecting bolt

Single-point fixingcountersunk

Single-point fixingclamping disc

Glass thickness

ø1

6

45 70

ø 25ø 25

Glass thickness

Glass thickness

Glass thickness

51

ø 3

2

ø2

5

ø2

5

51 51

35

0

15

0

52

0

52

0

52

01

24

0

17

60

72

0

40

90

0

12

25

20

42

25 25

42

MANET CONCEPT Pull handle /knob system

Spacing adjustment for pull handles and door knobs

at length of pull handles350 mm


Conversion set 1 for glass doors,pair of pull handles/knob back-to-back

door thickn. 13.5–21.5 mmArt. No. 8.21.285.700.99

Conversion set 2 for timber doors, pair of pull handles/knob back-to-back

door thickn. 20– 40 mmArt. No. 8.21.286.700.99

Conversion set 3for glass/timber doors, pull handle/knob single-sided,

single-point fixing

door thickn. 15– 40 mmcountersunk Art. No. 8.21.287.700.99clamping discArt. No. 8.21.288.700.99

Countersunk boreon pull handle and door knob,one side fixing

3 -0.2

Glass thickness

Glass thickness

ø2

6

ø3

2+

0.2

ø2

2

90

°

Cylindrical bore on pair of pull handlesand door knobs, back-to-back

15

60

mm

±0

.310

40

mm

±0

.3

52

0 m

m ±

0.3

15

0 m

m ±

0.3

min. ca. 65

min. ca. 65

Glass preparation pull handles and door knobs

Glass doorsdoor thickn. 13.5 mm: without Distance washerdoor thickn. 15 mm: with 1 Distance washerdoor thickn. 17.5 mm: with 2 Distance washerdoor thickn. 19 mm: with 3 Distance washer door thickn. 21.5 mm: with 4 Distance washer

Timber doorsdoor thickn. 20 mm: without distance washerdoor thickn. 25 mm: with 1 distance washerdoor thickn. 30 mm: with 2 distance washerdoor thickn. 35 mm: with 3 distance washer door thickn. 40 mm: with 4 distance washer

Glass doors/timber doorsdoor thickn. 15–21.5 mm: cylinder head screw M6x25 door thickn. 25–30 mm: cylinder head screw M6x35 door thickn. 35–40 mm: cylinder head screw M6x50

Distance washer 2 mm

Distance washer 5 mm

36 11/06

07/07 37

Recessed pull grip und ARCOS pull handle


ARCOS pair of pull handlefor 8/10/12 mm glassincl. connecting bolt

only in AISI 316L

Pull handle 350 mmwith 2 fixingsArt. No. 8.26.500.700.99

Pull handle 750 mmwith 2 fixingsArt. No. 8.26.510.700.99

ø 16

ø 16

80

Glassthickness

Cylindrical bore

Connectingbolt

39

8/8

24

mm

35

0/7

50

mm

dri

ll ho

le c

entr

es

~ 6585

Bushing

Grub screw

Glassthickness

Recessed pull grip Ø 50 mmfor 8/10/12 mm glassArt. No. 8.21.290.700.99

Recessed pull grip Ø 60 mmfor 8/10/12 mm glassArt. No. 8.21.291.700.99

Glass thickness

Glass thickness

Cylindrical bore

ø 5

0

ø 3

8

20 3

Glass thickness Glass thickness

Cylindrical bore

ø 6

0

ø 5

09 9

DORMA MANET COMPACT Sets

Content

Pivoting door 40

Sliding door 44

MANETCOMPACT Sets

Pivoting doorsSet 1page 41



Pivoting doors Set 2 + 3page 42/43

Sliding doorsSet 4/5/6page 44 - 49

MANET COMPACT Sets

Construction 5 (2 sets) Construction 6 (2 sets) Construction 7 (2 sets) Construction 8 (2 sets)

Construction 1 (1 set) Construction 2 (1 set) Construction 3 (1 set) Construction 4 (1 set)

The aesthetic elegance of theMANET COMPACT concept isalso available in the form ofstandardised sets for simple,fast planning of the morepopular system types with 8,10 or 12 mm toughenedsafety glass (TSG).Optional accessories enablethe individual sets to besemi-customised.

The system components offernumerous adjustment possibi-lities in order to ensure pro-blem-free installation of whichever door type – slidingor swing, single action ordouble action – is required.Wall abutment profiles mayneed to be provided (byothers) for fixing overpanelsand sidelights.

Construction 9 (1 set) Construction 12 (1 set) Construction 18 (2 sets)

Set 4.1/4.2 Set 5.1/5.2 Set 6.1/6.2

Construction 13 (1 set) Construction 15 (1 set) Construction 23 (2 sets)

Construction 21 (each 1 set)

MANET COMPACT Sets

40 11/06

Set 1


Set 1 consisting of: pivot rod pair top/bottom, short type,

including:4 Single-point fixings for pivot rods,1 Pivot fitting top,1 PT 25 pin, 15 mm Ø, with plug1 Pivot fitting bottom

for DORMA BTS/floor pivot

Art. No. 8.29.910.700.99

Art. No. 8.29.911.700.99Art. No. 8.29.555.700.99

Option: Set 1, but for additional intermediate tube in fixed length for pivot rod pairIntermediate tube in fixed length

Options for SET 1

Pull handles, Length 350 mmsingle point fixing, Length 720 mmcountersunk Length 1240 mm

Length 1760 mm

Pair of pull handles Length 350 mmLength 720 mmLength 1240 mmLength 1760 mm

Stop for pivoting door with ceiling mounting

Ceiling fixing (bearing function)

Corner lock

Corner lock with rose on one lock side

Profile cylinder for corner lock 8.21.448/449.700.99

Eccentric bushing for corner lock 8.21.448/449.700.99

Floor pivot bearing

Assembling tool for MANET single-pointfixings

5 pcs. clip-on cover f. single-point fixings

Art. No. 8.29.268.700.99Art. No. 8.29.271.700.99Art. No. 8.29.274.700.99Art. No. 8.29.277.700.99


Art. No. 8.21.334.700.99Art. No. 8.29.337.700.99

Art. No. 8.21.448.700.99

Art. No. 8.21.449.700.99

Art. No. 8.14.206.000.99

Art. No. 8.05.194.000.99

Art. No. 8.01.106.700.99

Art. No. 8.21.134.000.99

Art. No. 8.29.217.700.99

8

8

Pivoting door MANET COMPACT without overpanel for 10 -12 mm glass

Set 1with pivot rod pairshort type

For the requisite glass preparationplease see pages 20/21

3 G

ap

15

01

13

65

Ceiling

7 G

ap

Gapto sidelight 5to wall 8

Door weight 80 kg

Door height2500 mm

Door width1200 mm

15

01

13

65

DORMABTS

Panel height _________ mm – 577 mm= Length intermed. tube_________ mm

Essential information:

11/08 41

MANET COMPACT Sets

Set 2



including:4 Single-point fixings for pivot rods,1 Pivot fitting top,1 Pivot bearing location for overpanel,1 Pivot fitting bottom

for DORMA BTS/floor pivot

Art. No. 8.29.912.700.99

Art. No. 8.29.913.700.99Art. No. 8.29.555.700.99

Option: Set 2, but with additional intermediate tube in fixed length for pivot rod pairIntermediate tube in fixed length

Options for SET 2

Pull handles, Length 350 mmsingle point fixing, Length 720 mmcountersunk Length 1240 mm

Length 1760 mm



Stop at overpanel, (inside/outside)for 10 and 12 mm glass

Corner lock top/bottom

Corner lock top/bottom with rose on one lockside



Overpanel-sidel. conn. for 10/12 mm glass

Overp.-sidel. conn. with stop inside for10 and 12 mm glass

Overp.-sidel. conn. with stop outside for 10 mm glassfor 12 mm glass

Floor pivot

Assembling tool for MANET-single-point f.




Art. No. 8.29.337.700.99

Art. No. 8.29.335.700.99

Art. No. 8.21.448.700.99

Art. No. 8.21.449.700.99

Art. No. 8.14.206.000.99

Art. No. 8.05.194.000.99

Art. No. 8.29.320.700.99

Art. No. 8.29.322.700.99

Art. No. 8.29.324.700.99Art. No. 8.29.325.700.99

Art. No. 8.01.106.700.99

Art. No. 8.21.134.000.99

Art. No. 8.29.217.700.99

Pivoting door MANET COMPACT with overpanel for 10 -12 mm glass

Set 2with pivot rod pairshort type


3 G

ap

Wal

l

15

01

13

65

Overpanel

7 G

ap

Gap towall 8

Door weight 80 kg

Door height 2500 mm

Door width1200 mm

15

01

13

65

DORMABTS

Panel height _______ mm – 577 mm= Length intermed. tube_______ mm


42 11/08

Set 3



including:4 Single-point fixing for pivot rods,1 Pivot fitting top,1 Overpanel-sidelight connector with

pivot bearing location,1 Pivot fitting bottom

for DORMA BTS/floor pivot bearing

Art. No. 8.29.914.700.99

Art. No. 8.29.915.700.99Art. No. 8.29.555.700.99

Option: Set 3, but with additional intermediate tube in fixed length for pivot rod pairIntermediate tube in fixed length

Options for SET 3

Pull handles Length 350 mmsingle point fixing Length 720 mmcountersunk Length 1240 mm

Length 1760 mm



Stop at overpanel, (inside/outside)for 10 and 12 mm glass

Corner lock

Corner lock with rose on one lockside



Overpanel-sidel. conn. for 10/12 mm glass

Overp.-sidel. conn. with stop inside for10 and 12 mm glass

Overp.-sidel. conn. with stop outside for 10 mm glassfor 12 mm glass

Floor pivot

Assembling tool for MANET-single-point f.




Art. No. 8.29.337.700.99

Art. No. 8.29.335.700.99

Art. No. 8.21.448.700.99

Art. No. 8.21.449.700.99

Art. No. 8.14.206.000.99

Art. No. 8.05.194.000.99

Art. No. 8.29.320.700.99

Art. No. 8.29.322.700.99

Art. No. 8.29.324.700.99Art. No. 8.29.325.700.99

Art. No. 8.01.106.700.99

Art. No. 8.21.134.000.99

Art. No. 8.29.217.700.99

Pivoting door MANET COMPACT with overpanel and sidelight for 10 -12 mmglass

Set 3with pivot rod pair,short type


3 G

ap

3 Gap

Sid

elig

ht

15

01

13

65

Overpanel

7 G

ap

Gap towall 8

Door weight 80 kg

Door height 2500 mm

Door width1200 mm

15

01

13

65

DORMABTS

Panel height ________ mm – 577 mm= Length intermed. tube_________ mm


11/08 43

MANET COMPACT Sets

Set 4.1 / 4.2

Sliding door MANET COMPACT for installation to wall, for 8 -12 mm glass

For the requisite glass preparation pleasesee pages 30/31

60

143

143143

Doo

r he

ight

max

. 2

50

0 m

m

85

40 40

DGB = LM - 130 mm

LM

TB = LM + 80 mm

Fixed length: LL = 4 * X +286 mm

X XX X

Note:Door weight max. 100 kg

Set 4.1 with single-point fixings countersunk

Set 4.2 with clamping disc single-point fixings

LM = Daylight opening 700 - 1280 mmTB = Door width 780 - 1360 mmDGB = Entry width 570 - 1150 mmLL = Sliding track tube length X = Distance of single-point fixings

(LM –148) * 1/2

44 11/08

Set 4.1 / 4.2

Set 4.1 / Set 4.2 consisting of:

5 Clamp fixings for track / wall

2 Roller carriers CLASSICincl. single-point fixings for 8 -12 mm glass

1 Door stop left hand1 Door stop right hand1 Floor guide AGILEInstallation tools

Set as above, but with 16 mm extended clamp fixing

Not covered by the set:Intermediate tube in fixed length*

Art. No. 8.29.917.700.99Art. No. 8.29.916.700.99

Art. No. 8.29.925.700.99

Art. No. 8.21.436.700.99

Sliding door MANET COMPACT for installation to wall, for 8 -12 mm glass

Set 4.1with countersunk single-point fixings

Set 4.2with clamping discsingle-point fixings


Art. No. 8.29.926.700.99

11/08 45

Options for Set 4.1 / Set 4.2

Sliding track tube, inclusive end cups,stock length 3000 mm Art. No. 8.29.527.700.99

Pull handles Length 350 mm Art. No. 8.29.268.700.99 Art. No. 8.21.240.700.99Length 720 mm Art. No. 8.29.271.700.99 Art. No. 8.21.241.700.99Length 1240 mm Art. No. 8.29.274.700.99 Art. No. 8.21.242.700.99Length 1760 mm Art. No. 8.29.277.700.99 Art. No. 8.21.243.700.99

Pair of pull handles Length 350 mm Art. No. 8.21.267.700.99 Art. No. 8.21.267.700.99Length 720 mm Art. No. 8.21.270.700.99 Art. No. 8.21.270.700.99Length 1240 mm Art. No. 8.21.273.700.99 Art. No. 8.21.273.700.99Length 1760 mm Art. No. 8.21.276.700.99 Art. No. 8.21.276.700.99

Door knobback-to-back for 8 - 12 mm glass Art. No. 8.21.423.700.99

Door knobone side fixing for 8 - 12 mm glass Art. No. 8.21.422.700.99 Art. No. 8.21.426.700.99

Corner lock Art. No. 8.21.448.700.99

Corner lock with rose on one lock side Art. No. 8.21.449.700.99

Profile cylinder for corner lock 8.21.448/449.700.99 Art. No. 8.14.206.000.99

Eccentric bushing for corner lock 8.21.448/449.700.99 Art. No. 8.05.194.000.99

Aluminium guide rail with brush sealsstock length 3000 mm Art. No. 8.21.432.100.99stock length 6000 mm Art. No. 8.21.430.100.99

Assembling tool for MANET single-point fixing Art. No. 8.21.134.000.99

5 pcs. clip-on cover f. single-point fixings Art. No. 8.29.217.700.99

* When ordering please indicate the necessary length! For calculation please see adjoining page.

MANET COMPACT Sets

Set 5.1 / 5.2

Sliding door MANET COMPACT for installation to glass, one side attached to masonry for sliding door 8 -12 mm glass, fixed element 10 - 12 mm glass


60

143

50

50

30

143143

Doo

r he

ight

max

. 2

50

0 m

m

70

40

DGB = LM–100 mm

LM

TB = LM + 40 mm

Fixed length: LL = 2 * X + 2 * Y + 360 mm

OB = LM–3 mm

Gap 3 mm

SB min. = LM–60 mm

X X Y Y


Sliding door

SidelightOverpanel

Set 5.1 with countersunk single-point fixings

Set 5.2 with clamping disc single-point fixing

LM = Daylight opening 700 -1320 mmTB = Door width 740 -1360 mmDGB = Entry width 600 -1220 mmSBmin. = min. sidelight widthLL = Sliding track tube length X = Centre distance

between single-point fixings overpanel (OB –193) * 1/2

Y = Centre distance between single-point fixings sidelightY = X–29

OB = Overpanel width

46 11/06

Set 5.1 / 5.2

Set 5.1 / Set 5.2 consisting of

6 Clamp fixings fixing to glass, countersunk


1 Wall fixing1 Door stop left hand1 Door stop right hand1 Floor guide AGILE Installation tools


Art. No. 8.29.919.700.99Art. No. 8.29.918.700.99

Art. No. 8.21.436.700.99

Sliding door MANET COMPACT for installation toglass, one side attached to masonry, for sliding door 8 -12 mm glass, fixed element 10 - 12 mm glass

Set 5.1with countersunksingle-point fixings



11/08 47












Ceiling connector (bearing function) Art. No. 8.21.337.700.99 Art. No. 8.21.338.700.99



* When ordering please indicate the necessary length! For calculation please see the adjoining page.

MANET COMPACT Sets

Set 6.1 / 6.2

Sliding door MANET COMPACT for installation to glass, sidelights on both sides for sliding door 8 -12 mm glass, fixed elements 10 - 12 mm glass

For the requisite glass preparationplease see page 30/31

60

143

50

5050

100

143143

Doo

r he

ight

max

. 2

50

0 m

m

70

4040

DGB = LM–100 mm

LM

TB = LM + 80 mm

Fixed length: LL = 2 * X + 2 * Y + 460 mm

OB = LM–6 mmmin. 110

Gap 3 mmGap 3 mm

SB min. = LM–20 mm

X X Y Y


Sliding door

SidelightSide-light

Overpanel

Set 6.1 with countersunk single-point fixings

Set 6.2 with clamping disc single-point fixings

LM = Daylight opening 700 -1320 mmTB = Door width 740 -1360 mmDGB = Entry width 600 -1220 mmOB = Overpanel widthSBmin.= min. Sidelight widthLL = Sliding track tube length X = Centre distance

between single-point fixings overpanel (OB –150) * 1/2

Y = Centre distance between single-point fixings sidelightY = X–29

48 11/08

Set 6.1 / 6.2

Set 6.1 / Set 6.2 consisting of

7 Clamp fixings fixing to glass


1 Door stop left hand1 Door stop right hand1 Floor guide AGILEInstallation tools


Art. No. 8.29.921.700.99Art. No. 8.29.920.700.99

Sliding door MANET COMPACT for installation toglass, sidelight on both sides,for sliding door 8 -12 mm Glass, fixed elements 10 - 12 mm glass

Set 6.1with single-point fixingscountersunk



11/08 49












Ceiling connector (bearing function) Art. No. 8.21.337.700.99 Art. No. 8.21.338.700.99



Art. No. 8.21.436.700.99

* When ordering please indicate the necessary length! For calculation please see the adjoining page.

50 07/06

MANET Accessories

Inhalt

Accessories 52

Accessories

Installation tools /accessories


Clip-on cover for single-point fixing with spring, 5 piecesArt. No. 8.29.217.700.99

Assembling tool forMANET single-point fixing(can also be used as attach-ment for torque wrench)Art. No. 8.21.137.000.99

Sample caseArt. No. 8.21.995.000.99

MANET Accessories

52 11/06

09/10 53

Subject to change without notice.

For practical planning, please use our drawings DORMA-Glas DETAIL.

For planning of intelli-gent glass solutionswe offer you several

planning tools which allow youto create secure and professio-nal solutions for any kinds ofglass doors and toughend glassassemblies.

The planning tools DGES andMANET COMPACT enable youto prepare designs and costcalculations quickly, reliablyand professionally. The soft-ware provides you with allnecessary documentation suchas dimensioned technical drawings, glass sizes and pre-paration measures.

Your benefits:• Easy to operate• Professional and error-free

preparation of offers• Rapid response to incoming

requests for quotations• Highly reduced planning

costs for time and moneysavings

DGES Fittings (for internal doors and toughend glass assemblies), Art. No. 800.51.249.6.32

DGES HSW (for horizontal sliding walls), Art. No. 800.51.247.6.32

DGES Showers (for glass shower cubicles), Art. No. 800.51.424.6.32

MANET COMPACT planningtool (for MANET pivoting and sliding doors), Art. No. 800.51.329.6.32

Planning tool

54 11/06

55 01/10

WN 800.51.221.6.32 · 09/10 · GB · IWDB · 3 · x/10

DORMA GlasTec GmbHLeonardo-da-Vinci-Weg 6 - 8D-32760 DetmoldTel. +49 5231 308030Fax +49 5231 3080310www.dorma-glastec.de

TB 221 PHB MANET GB.qxd:TB 221 PHB MANET...

Documents

Transcript of TB 221 PHB MANET GB.qxd:TB 221 PHB MANET...