Taximeter “Drive 2 LED” - Noel Byrne Auto...
2
Key Benefits • RS232 Interface to connect a receipt printer, trip data storage, second slave display, dispatch system, credit card reader, etc. • Easy Installation to a wide range of speed pulses, no divider necessary • Bright, easy to read LED Display • Mounting in radio slot or with mounting bracket • All wires on a 15pin D-Plug • Tariff change without dismounting via IR-Interface at the front of the meter. • Each meter can have it’s own ID number • 4 Roof lights 3A (36 W) standard Taximeter “Drive 2 LED” Technical Specification • Dimensions: 180x51,5x25mm • Weight: app.200 g • Storage temperature: -25 up to + 70 °C • Operating temperature: -25 up to + 70 °C • Humidity: max.95% at 20 °C not condensing • Operating voltage: 7-18 V • Current consumption at 12 V supply voltage: - active approx.150 mA - standby approx. 26 mA - switched off approx. 6 mA • Impulse input suitable for: - Hall impulse generator: output with open collector - Electronic distance equivalent impulses supplied by car equipment with TTL level or 12 Vpp: Ulmax=1,0V Uhmin = 2,5V, impulse ratio 25 – 75% at a frequency of 0-10 kHz. - Inductive impulse generator: sinus shaped signal with Amplitude of 2 – 20 Vpp ground symmetric with frequency 0-10 kHz - Possible impulse range 500 – 100 000 pulses/km • Ignition input: Switching signals • Bypass or Seat contact input: - TTL level (Rlmin = 10 kohm) or 0V/12V (Rlmin=1 kohm) • Lamps outputs: max. 3 A, 36 W continuously each output (short circuit protection) max. 4 lamps • Number of outputs: 4 lamps, 1 RS232 (up to 2 RS232) • Optional inputs: 3 universal inputs, TTL level • Optional outputs: 3 universal outputs, TTL level • Programming data interface: Front side IR-interface • Clock: Accuracy +/- 0,1sec. per day (at 25 °C) • Accessories: - Handheld Tariff Programming unit - Receipt Printer - RS 232 Chip Card Data Storage unit - IR-Optical link Interface to PC Interfaces: Accessory: Handheld Programmer Accessory: Receipt Printer Mobil Tariff Programmer with SMART CARD and IR Interface • up to 5 Headlines • Receipts Counter • Car Number • Starting time/date of a trip • Time/date of receipt print • Mileage • Fares • Extras • Sum • up to 5 Footnotes MATTIG-SCHAUER GmbH • Matznergasse 34, A-1140 Vienna • Tel.: ++43/1/ 984-83-83-0, Fax: ++43/1/ 984-83-83- 30 http: www.mattig-schauer.at • e-mail: [email protected] ➥ IR Lamp 1-4 RS232 Printer Pulse transducer Optional: Ignition Optional: RS232 2 nd Display Tripdata Storage Credit Card Reader Radio Data Terminal Bluetooth Adapter Optional: 4 inputs 3 outputs ▲ ▲ 28,9 ▲ ▲ 51,5±0,7 ▲ ▲ 179±0,25
Transcript of Taximeter “Drive 2 LED” - Noel Byrne Auto...
Key Benefits
• RS232 Interface to connect a receipt printer, trip data storage, second slave display, dispatch system,credit card reader, etc.
• Easy Installation to a wide range of speed pulses, no divider necessary
• Bright, easy to read LED Display
• Mounting in radio slot or with mounting bracket• All wires on a 15pin D-Plug• Tariff change without dismounting via IR-Interface
at the front of the meter.• Each meter can have it’s own ID number• 4 Roof lights 3A (36 W) standard
Taximeter “Drive 2 LED”
Technical Specification
• Dimensions: 180x51,5x25mm• Weight: app.200 g• Storage temperature: -25 up to + 70 °C• Operating temperature:-25 up to + 70 °C• Humidity: max.95% at 20 °C not condensing• Operating voltage: 7-18 V• Current consumption at 12 V supply voltage:
- active approx.150 mA- standby approx. 26 mA- switched off approx. 6 mA
• Impulse input suitable for:- Hall impulse generator: output with open collector- Electronic distance equivalent impulses supplied by
car equipment with TTL level or 12 Vpp: Ulmax=1,0V Uhmin = 2,5V, impulse ratio 25 – 75% at a frequency of 0-10 kHz.
- Inductive impulse generator: sinus shaped signal with Amplitude of 2 – 20 Vpp ground symmetric with frequency 0-10 kHz
- Possible impulse range 500 – 100 000 pulses/km
• Ignition input: Switching signals• Bypass or Seat contact input:
- TTL level (Rlmin = 10 kohm) or 0V/12V (Rlmin=1 kohm)
• Lamps outputs: max. 3 A, 36 W continuously eachoutput (short circuit protection) max. 4 lamps
• Number of outputs: 4 lamps, 1 RS232 (up to 2 RS232)• Optional inputs: 3 universal inputs, TTL level• Optional outputs: 3 universal outputs, TTL level• Programming data interface: Front side IR-interface• Clock: Accuracy +/- 0,1sec. per day (at 25 °C)
• Accessories:- Handheld Tariff Programming unit- Receipt Printer- RS 232 Chip Card Data Storage unit- IR-Optical link Interface to PC
Interfaces: Accessory: Handheld Programmer Accessory: Receipt Printer
Mobil Tariff Programmerwith SMART CARD andIR Interface
• up to 5 Headlines• Receipts Counter• Car Number• Starting time/date of a trip• Time/date of receipt print
• Mileage• Fares• Extras• Sum• up to 5 Footnotes
MATTIG-SCHAUER GmbH • Matznergasse 34, A-1140 Vienna • Tel.: ++43/1/984-83-83-0, Fax: ++43/1/984-83-83-30http: www.mattig-schauer.at • e-mail: [email protected]
➥IR
Lamp1-4
RS232Printer
Pulsetransducer
Optional:Ignition
Optional:RS2322nd DisplayTripdata StorageCredit Card ReaderRadio Data TerminalBluetooth Adapter
Optional:4 inputs3 outputs
�
�28,9
�
�
51,5
±0,7
�
�179±0,25
Key Benefits
• RS232 Interface to connect a receipt printer, trip data storage, second slave display, dispatch system,credit card reader, etc.
• Easy Installation to a wide range of speed pulses, no divider necessary
• Bright, easy to read DOT Matrix LCD Display
• Mounting in radio slot or with mounting bracket• All wires on a 15pin D-Plug• Tariff change without dismounting via IR-Interface
at the front of the meter.• Each meter can have it’s own ID number• 4 Roof lights 3A (36 W) standard
Taximeter “Drive 2 LCD”
Technical Specification
• Dimensions: 180x51,5x25mm• Weight: app.200 g• Storage temperature: -25 up to + 70 °C• Operating temperature:-25 up to + 70 °C• Humidity: max.95% at 20 °C not condensing• Operating voltage: 7-18 V• Current consumption at 12 V supply voltage:
- active approx.150 mA- standby approx. 26 mA- switched off approx. 6 mA
• Impulse input suitable for:- Hall impulse generator: output with open collector- Electronic distance equivalent impulses supplied by
car equipment with TTL level or 12 Vpp: Ulmax=1,0V Uhmin = 2,5V, impulse ratio 25 – 75% at a frequency of 0-10 kHz.
- Inductive impulse generator: sinus shaped signal with Amplitude of 2 – 20 Vpp ground symmetric with frequency 0-10 kHz
- Possible impulse range 500 – 100 000 pulses/km
• Ignition input: Switching signals• Bypass or Seat contact input:
- TTL level (Rlmin = 10 kohm) or 0V/12V (Rlmin=1 kohm)
• Lamps outputs: max. 3 A, 36 W continuously eachoutput (short circuit protection) max. 4 lamps
• Number of outputs: 4 lamps, 1 RS232 (up to 2 RS232)• Optional inputs: 3 universal inputs, TTL level• Optional outputs: 3 universal outputs, TTL level• Programming data interface: Front side IR-interface• Clock: Accuracy +/- 0,1sec. per day (at 25 °C)
• Accessories:- Handheld Tariff Programming unit- Receipt Printer- RS 232 Chip Card Data Storage unit- IR-Optical link Interface to PC
Interfaces: Accessory: Handheld Programmer Accessory: Receipt Printer
Mobil Tariff Programmerwith SMART CARD andIR Interface
• up to 5 Headlines• Receipts Counter• Car Number• Starting time/date of a trip• Time/date of receipt print
• Mileage• Fares• Extras• Sum• up to 5 Footnotes
MATTIG-SCHAUER GmbH • Matznergasse 34, A-1140 Vienna • Tel.: ++43/1/984-83-83-0, Fax: ++43/1/984-83-83-30http: www.mattig-schauer.at • e-mail: [email protected]
➥
�
�28,9
�
�
51,5
±0,7
�
�179±0,25
IR
Lamp1-4
RS232Printer
Pulsetransducer
Optional:Ignition
Optional:RS2322nd DisplayTripdata StorageCredit Card ReaderRadio Data TerminalBluetooth Adapter
Optional:4 inputs3 outputs
