Model No. EL4868

Please read carefully before use and keep for future referenceImported and distributed by Easylife Group Ltd, London NW1 0JP Customer service: 0303 031 0777For more innovative products from Easylife please visit: www.easylifegroup.com

IN4868 © 2017 Easylife Group Ltd

PANTONE 072 CPANTONE 123 C Paper weight 60gsm

everyday solut ions

™

Est. 1992

Support Line: 0303 031 0777For more innovative products from Easylife please visit:

www.easylifegroup.comeveryday solut ions

™

Est. 1992

Solar Radio Controlled WatchINSTRUCTION MANUAL

T&JTavistock & jones

Solar, radio

controlled with LCD display & luminous

hands

TECHNICAL SPECIFICATIONIntegrated radio receiver to capture MSF 60 time signal:Operating Voltage Range: 3V Operating Temperature Range: -20C to +65CApprox Battery life: 1 year Battery Type: Rechargeable ML2016 Battery Time Check with Transmitter: 03:00 (AM)Automatic resetting to Summer/Winter time: Appox. 5 Mins

WARNING - Possible Causes of interferencesDomestic appliances without radio interference suppressors.TV receivers closer than 2 metres.The outer radius around the location of the transmitter (of 1,500 km or more) topographical and meteorological conditions can have an adverse effect on reception due to the coverage of long waves.It is able to pick up signal from UK, GERMANY, USA and JAPAN (60Khz only).

NOTE: If battery is too low, the watch is not able to maintain the internal running time and the watch will not be able to be activated. This is not a malfunction. If this is the case, the watch needs to be charged under strong light until the LCD displays “Set to 12”. After that follow the “After Battery Replacement” to initiate the watch.

Thank you for purchasing the Tavistock & Jones Solar ‘World Time’ Radio Controlled Watch. The Tavistock & Jones radio controlled, multi-band atomic watch picks up the official time and date signals from radio transmitters across the UK, Europe, Japan and North America, ensuring it’s always accurate to the correct local time. It never needs setting; however it can also be adjusted manually for countries with no signal. Plus it automatically adjusts for British summer and winter time without you having to touch it.

Dear Customer

MAIN FEATURES:

1. Solar Powered 2. Automatic Radio Controlled Time Setting for USA (WWVB), Germany (DCF), UK (MSF), and Japan (JJY 60Khz only) 3. Time Zone setting by 31 major City names 4. 3 Levels Signal strength indicator 5. Reception success and failure indicator 6. LCD reading selection for: Day of the week or Date & Month or Second or Battery level 7. Dual Language selection between English and German for Day 8. Reset the Watch (LCD shows RST) 9. Rechargeable Battery 10.Battery level indicator 11.Around 3 months battery life when the battery is fully charged

When battery level is low, the LCD shows a flashing empty battery icon and the seconds hand runs 2 steps every 2 seconds. When this is the case, all button functions and signal reception will be prohibited. If battery is not charged up in time, the hands stop to save battery power at 12 o’clock. Then you need to charge up the watch. It may take few days if the battery is too low. The watch will automatically set itself once the battery level returns to normal. The battery icon represents different battery levels as below.

CHARGING THE WATCH

RECHARGING TIME

The watch may need several days to charge up (depending on the charging environment) from a complete stop if the battery is too low. Wait patiently until the watch is charged up and resume normal operation.

10,000Lux (Under Cloudy conditions) 12-15 Hours 50-60 Hours 40-50 Hours

30,000Lux (Under Direct Sunlight) 6-8 Hours 18-23 Hours 10-15 Hours

MANUAL SIGNAL RECEPTION:

RECEPTION STATUS CHECK:

1. Hold S1 for more than 3 seconds until the LCD display shows the Antenna icon. The letter on the right hand side of the display shows the signal to receive. Where W=WWVB, J=JJY, D=DCF and M=MSF. The second-hand pauses at 12 o’clock during signal reception (for all Time Zones).

2. Put the watch (with face-up or face-down, never put the watch by its side) near a window to get signal.

3. Once there is reception, the watch will show the time again after the fast running of the minute hand has stopped.

During signal reception, the LCD display shows the signal-strength. It is good to search a location where signal is the strongest for a good signal reception.

You can check if the watch is able to pick up signal.Press S1 once to check (while the watch runs normally).

If Reception OK → The LCD window shows OK If Reception FAIL → The LCD window shows NO

LCD Display selection:You can set the watch to show either one of the following digital readings on the LCD display. a. Date, or b. Day and Month c. Second d. Battery level

Press S2 (the lower right button) twice to select to set your preferable display. The LCD display responds on your second press of the S2 button.

BUTTON FUNCTIONS:S1 SIGNAL• Press and release S1 once to check if the reception is OK or Fail• Press twice to show the battery level for around 5 seconds• Press and hold this button 3 seconds for Manual Signal

Reception

S2DISPLAY/MENU• Press to set LCD display to show Month, or Day, Date or,

Second or Battery level• Press and hold this button to enter the “Main Menu” which sets

the following:- Time Zone- Language Selection for Day Display (English or German)- Manual Time Setting Mode- CAL (ignore this non-functioning option)- RST –Reset the Watch

TIME ZONE SETTING:USA user must set the watch to one of the following Time Zones.

Time Zone Reading on LCD Eastern NYC (New York, USA)Central CHI (Chicago, USA)Mountain DEN (Denver, USA)Pacific LAX (Los Angeles, USA)

1. Hold S2 (the lower right button) for about 3 seconds while the watch is in the normal time keeping mode until the LCD displays a City name (3 digits City code)

2. Press S1 (the upper right button) to set your Time Zone according to the table below.3. Press S2 to confirm (or the watch will confirm by itself after 1 minute)4. The watch will run to the new Time according to the new Time Zone setting

automatically after the confirmation. Wait until the watch runs normally. The LCD shows “WAIT” telling you to wait while it is updating the time. The running time varies from 2 to 40 minutes according to your Time Zone setting.

TABLE OF TIME ZONE AGAINST 31 MAJOR CITY NAMES

If you travel to a country where no Radio Signal is available, your watch will continue to function in the same way as a standard watch.

Time Zone City Code (City Name) on LCD display+0 (UK) LON (London) – Radio Signal available+1 (Europe) BER (Berlin) – Radio Signal available+1 (Europe) PAR (Paris) – Radio Signal available+1 (Europe) ROM (Rome) – Radio Signal available+1 (Europe) AMS (Amsterdam) – Radio Signal available+1 (Europe) BRU (Brussels) – Radio Signal available+1 (Europe) STO (Stockholm) – Radio Signal available+1 (Europe) WAW (Warsaw) – Radio Signal available+1 (Europe) MAD (Madrid) – Radio Signal available+2 CAI (Cairo)+3 MOW (Moscow)+4 DXB (Dubai)+5 KHI (Karachi)+6 DAC (Dacca)+7 BKK (Bangkok)+8 PEK (Beijing, China)+8 HKG (Hong Kong, China)+9 SEL (Seoul, Korea) – Radio Signal available

Time Zone City Code (City Name) on LCD display +9 (Japan) TYO (Tokyo) – Radio Signal available+10 SYD (Sydney)+11 NOU (Noumea)+12 AKL (Auckland)-12 ----11 ----10 HNL (Honolulu)-9 ANC (Anchorage)-8 (Pacific) LAX (Los Angeles) – Radio Signal available-7 (Mountain) DEN (Denver) – Radio Signal available-6 (Central) CHI (Chicago) – Radio Signal available-5 (Eastern) NYC (New York) – Radio Signal available-5 YUL (Montreal, Canada)-4 CCS (Caracas)-3 RIO (Rio De Janeiro)-2 ----1 ---

MANUAL TIME SETTINGYour watch will set itself automatically. This manual time setting is an option only when there is no signal around after the battery is replaced. When you go abroad, you should change the time of your watch using Time Zone setting instead of the Manual Time Setting.

TROUBLESHOOTINGSecond-hand shiftingYour watch is a very delicate and precise instrument. Although uncommon, sometimes hard knocks or vibrations can cause the hands to move irregularly, and therefore display the incorrect time, although the internal clock is keeping accurate time. You may notice this if when setting the LCD to “Second” reading and found that it is not synchronized with the Analog Second-hand. This shows the reference point of the Analog Second-hand has changed and the watch needs to be reset. Please go to “Reset the Watch” for details.

Watch Not Receiving Time SignalReason for not being able to receive the Time Signal include, -Being outside of the radio signal area -Being out in a built up area -Metal objects blocking the radio signal -Interference from a computer monitor or TV

Ensure the watch is left by a window, as this gives the best reception, you may have to try different windows in the house to see which is best. You can test this using reception status test described earlier. Please note that reception is always better at night.If your watch is unable to make contact with the radio signal, it will continue to function in the same way as a standard watch. The time will then be corrected the next time your watch receives the time signal.

Watch stop or runs 2 steps every 2 secondsWhen Battery level is low, the LCD shows a flashing empty battery icon and the seconds hand runs 2 steps every 2 seconds. If the battery is not charged up in time, the hands stop to save battery power at 12 o’clock. This is not a malfunction. Then you need to put the watch under direct sunlight or cool fluorescent light until the hand resumes running. It may take few days if the battery is too low. The watch will automatically set itself once the battery level returns to normal. Please go to “Charging the watch” for details.Hour is wrong while Minute is rightIf your Time Zone setting is incorrect, your watch will show you the wrong time. You need to manually set it to the right Time Zone. Go to “Time Zone Setting” for details.

Second or Hour or Minute hands are wrongNeed to reset all hands to 12 o’clock. Go to “Reset the watch” for details.

No Display and watch hands stopIf battery is too low, the watch is not able to maintain the internal running time. When this is the case, the LCD does not show any display and watch hands do not run. This is not a malfunction. If this is the case, the watch needs to be charged under strong light until the LCD displays “Set to 12”. After that follow the “After Battery Replacement” to initiate the watch.If the watch does not show “Set to 12” after charging under strong light continuously for several days, the battery needs to be replaced. Go to “Battery Change” for details.

Reset the Watch1. Make sure the watch is running second by second.2. Press and holding S2 (lower button) for about 3 seconds until the LCD displays a City name (3

digits City code) then release the button.3. Press-release S2 once after another until the LCD shows a blinking “RST” and then release the

button4. Press and holding (S1) until the LCD displays “Set to 12”.

Continue to hold S1 until the second hand spins fast. You can stop the high speed running watch hand by a press-release of S1 anywhere you want. To restart the fast running second-hand, press and hold S1 for 3 seconds.

5. Stop the fast moving second-hand by press-release S1 before all hands reach the 12 o’clock position. We recommend stopping at 11:59:00 and continuing manually.

6. Press-release S1, one short press at a time to incrementally move the hands forward to point exactly at 12 o’clock. Should you accidentally pass 12:00:00, the procedure must be started again.

7. When all hands are aligned at the 12 o’clock position (12:00:00), PUSH S2 (lower button) hard to confirm.

8. After confirmation, the LCD display shows “LON”. This is the pre-set Time Zone of the watch – LONDON, UK.

9. Set your Time Zone by pressing S1 10. Press-release S2 to confirm11. Then the watch will initiate a signal reception automatically. Put the watch nearby a

window and let it rest on its side or face-down (make sure a metal band doesn’t touch the case-back of the watch).

12. The watch will run to the right time if the reception is successful or will start to run at 12 o’clock if the reception failed.

13. Place your watch near a window to get a signal if the initial reception failed. The watch will start to update signal at the beginning of next Hour. It will continue updating signal for the coming 24 hours. After receiving a valid time signal, the hands move to the correct time.

NOTE: Make sure you check the battery level is at least half-full before doing the RESET. If the battery level is not half-full, charge up the watch until it reaches this level.

After Battery Replacement1. After battery replacement, the LCD displays “Set to 12”.2. Hold S1 until the second hand spins fast. You can stop the high speed running watch hand by

a press-release of S1 anywhere you want. To restart the fast running second-hand, press and holding S1 for 3 seconds

3. Stop the fast moving second-hand by press-release S1 before all hands reach the 12 o’clock position. We recommend stopping at 11:59:00 and continuing manually.

4. Press-release S1, one short press at a time to incrementally move the hands fast to point exactly at 12 o’clock. Should you accidentally pass 12:00:00, the procedure must be started again.

5. When all hands are aligned at the 12 o’clock position (12:00:00), Push S2 (lower button) hard to confirm.

6. The LCD display shows “LON”. This is the pre-set Time Zone of the watch – LONDON, UK.7. Set your Time Zone by S1 8. Press-release S2 to confirm9. Then, the watch will initiate a signal reception automatically. Put the watch near a window and let it

rest on its side or face-down (make sure a metal band doesn’t touch the case-back of the watch).10. The watch will run to the right time if the reception is successful or start to run at 12 o’clock if the

reception failed.11. Place your watch near a window to get signal if the initial reception failed. The watch will start to

update signal at the beginning of the next Hour. It will continue updating signal for the coming 24 hours. After receiving a valid time signal, the hands will move to the correct time.

Set the watch to sleep mode:1. While the watch is running normally, holding S1 and then holding S2 and wait for around 3 seconds

until the second hand spins to stop at 12 o’clock. The LCD shows RST.2. Then release all buttons3. Press S1 once to enter the sleep mode4. After pressing S1, the watch spins to stop at 12:00:00 to sleep mode (this will take a long time to

reach).5. When the watch is in sleep mode, the LCD turns off, the hands stop and signal reception is

stopped but the internal time is still running.

Set the watch from sleep mode to active:1. When the watch is sleep mode, press any button once to activate the watch. The LCD displays

“WAIT”. Please wait until the watch hands set automatically to match the internal running time.2. After the watch is activated, all functions return to normal.

1. Hold S2 (the lower right button) for about 3 seconds while the watch is in the normal time keeping mode until the LCD displays a City name (3 digits City code)

2. Press S2 until it shows Hour digits. You can see a “H” on the LCD representing Hour setting. It is a 24 hour format.

3. Press S1 to set and S2 to confirm the Hour setting4. After confirmation of Hour, the LCD shows “M” representing Minute setting, press S1 to

set and S2 to confirm.

After confirmation the watch will show “WAIT” before running to the new Time according to the new time setting. Just wait until the watch resumes normal running.

NOTE: Make sure you check the battery level is at least half-full before doing the Manual Time Setting. If the battery level is not half-full, charge up the watch until it reach to this level.