English · Deutsch · 日本語

TaurusInstruction ManualBH1001 Wireless Sport Headphones

English

Overview

○ Status indicator○ Mic

○ Previous / Volume Down○ Next / Volume UP

○ (MFB) Multifunction key

AB

E

D

○ Micro USB PortF

C

1

A

BC

D

E

F

No. Button Name FunctionVarious colors of lights indicate different statusMicrophonea. Start, press MFB key for 1 second, blue light blinking

b. Turnoff, press MFB key for 3 seconds, light off

c. Pairing, long press MFB key until the light flickers red/blue when in turnoff mode, and it’s ready to match

d. Answer calls, press MFB key for I second when in headphones mode

e. Hang up, press MFB key for 1 second when in conversation, phone call ends.

f. Reject calls, long press the MFB key to reject when there comes a phone call

Long press D button for next song, short press it for + volumeLong press E button for previous song, short press it for - volumeCharging

Status indicator

Mic （MFB）Multifunction key

Next / Volume UP

Previous / Volume DownMicro USB Port

Package contents• 1*BH1001 Wireless Sport Headphones• 2*Silicone ear plugs (ML / SM) • 1*0.9meter / 3Ft USB charging cable• 1*Customized ribbons• 1*Headphones carrying case• 1*Instruction manual

2

How to use the BH1001 sport Bluetooth earphonesPairing: needs to match up with Bluetooth device for the first time of use1. Long press the C button (MFB) in shutdown status, until the "A" key status indicator flashes red and blue;2. Turn on the Bluetooth on your cellphone (or other Bluetooth devices), search for Bluetooth devices around;3. Select the “INATECK BH1001” on your cellphone (or other Bluetooth devices) and complete pairing, voice prompt of the successful connection can be heard at the same time. (If you get prompts of entering pairing code in the process, please enter "0000".

Music starts

3

Bluetooth

Bluetooth

Inateck BH1001

Bluetooth

Inateck BH1001

How to use the earphone to answer phone calls

When in playing mode, short press the C button to answer it when there is a phone call coming; press it again to hang up the call. Long press MFB key to reject the call. Notes:Of course, you can still choose to answer / hang up / reject calls with your own cellphone.

Daily useShort press C button (MFB) in shutdown state to start the earphone, then it will automatically search the successful connected device last time and automatically connect it. After that, all you need to do is enjoy your music.Note: The earplug ends are designed as magnetic, once both ends attract with each other the music stops and get into the Pause state. When you finished exercising, just make the earplug attract each other, become a circle hanging on your neck, you don’t need to worry about losing it anymore.

4

Hello

Battery indicator Speaker stateStandby to pair

Charging

Fully charged

operating/standby

low battery

Status LED indicator (A key) flickering Red & BlueStatus LED indicator (A key) turns constant RedStatus LED indicator (A key) turns constant BlueStatus LED indicator (A key) flashes Blue for every 5 secondsStatus LED indicator (A key) flashes Red every 20 seconds

How to charge the earphone

1. Please use the attached Micro USB cable to connect the earphone with USB Charger2. Any USB chargers of 5V output can charge this earphone. 3. Vary from different types of music, this Bluetooth earphone needs 3 hours to be fully charged and have about 7 hours of playback.

5

(Not included)

Trouble shooting

Tips:• Power saving mode: Under the Power-on status, the earphone will automatically shut down when there is no Bluetooth connectivity in 10 minutes. • Why we didn’t provide the USB charger? Currently, most smartphones' (Apple/Android/Windows) USB chargers could meet the standard of 5V/1A, tablets' USB charger could reach 5V/2A, both can charge the earphone efficiently. Therefore, in order to reduce unnecessary of repurchase, and cut down the industrial manufacturing harm to the environment, we do not provide the charger along with this earphone.

1. Earphone will not turn on• The built-in battery may have run out. Please use the attached USB cable to charge the earphone at least for one hour before restart it.

2. Cannot pair and connect the earphone with Bluetooth device• Ensure your Bluetooth device support A2DP protocol.• Clean memory of the paired Inateck BH1001 in the Device List, re-pair it. • Ensure there are no other Bluetooth devices connected to the earphone or your devices.• 10 meters is the farthest working distance for the earphone. (Walls may have impact on the Bluetooth connectivity).Try moving it closer to the earphone.• Press MFB button to shut down and restart the earphone.

6

Other information

3. Intermittent connectivity or distortion would occur during the Bluetooth play• Find out the possible sources of interference; make sure your Bluetooth device and the earphone get away from the interference. • Try to keep the possible jamming equipment away at a distance of 10 meters.• Adjust the placement of Bluetooth device or Bluetooth earphone.• Shut down any possible jamming equipment.• Do not place the Bluetooth device or Bluetooth earphone on the top or inside of metals.

Note:Due to the characteristics of Bluetooth wireless technology, there might be a delay between the Bluetooth transmitting devices transmits a signal to the Bluetooth receiving device.

Safety informationPlease take your time to follow the guidelines carefully before using Inateck products.

Built-in battery• Do not dismantle, open or shred battery pack• The battery pack shall not be exposed to excessive heat such as sunshine, fire or the like.

7

SpecificationsBluetooth 4.1CSR86452402-2480 MHz100mAH 8mm, 16Ω, 3mWHeadphones, Hands-free, A2DP, AVRCP* Refer to your Bluetooth device (notebook, PC, mobile device) manufacturer’s documentation / website for supported profiles.SBC, APT-XThe speaker’s Bluetooth range is up to 10-15 meters in open and unobstructed space. Walls and structures may affect range of device.

Bluetooth versionBluetooth chipsetOperating frequencyBattery capacity Speaker output powerSupported Bluetooth stetting profile

Supported CodecBluetooth range

Additional guidelines for Bluetooth devices • The short wave radio frequency signals of a wireless device may impair the operation of other electronic and medical devices. • Switch off the device where it is prohibited. Do not use the device in medical facilities, aircraft, refueling points, close to automatic doors, automatic fire alarms or other automatically controlled devices. • Keep this device at least 20cm from pacemakers and other medical devices. Radio waves may impair the operation of pacemakers and other medical devices.

8

Compatibility statementWireless performance depends on your device’s Bluetooth wireless technology. (Please refer to your device manufacturer’s manual.) Inateck assumes no responsibility for any date loss or leakage caused by using these devices.

Germany

Tel.: +49 342-07673081 Fax.: +49 342-07673082

Phone hours: Weekdays 9 AM-5 PM (CET)

Email: support@inateck.com

Web: http://www.inateck.com/de/

Addr.: F&M TECHNOLOGY GmbH, Montgolfierstraße 6,

04509 Wiedemar

Contact Information

USA

Tel.: +1 513-644-9712

Phone hours: Weekdays 9 AM to 5 PM (EST)

Email: support@inateck.com

Web: www.inateck.com

Addr.: F&M Technology LLC, 9852 Crescent Park Drive,

West Chester, OH 45069 USA

Japan

Email: support@inateck.com

Web: www.inateck.com/jp/

Addr.: F＆M株式会社 東京都昭島市拝島町三丁目10番3号

9