Tap-Changer VUCGLB Balamurugan N Approved by …...Balamurugan N 2015-02-15 Modified by Take over...
2
This document is issued by means of a computerized syste The digitally stored original is ele ctronically approved approved document has a date entered in the `Approved'-f A manual signature is not required. The information contained in this document has to kept strictly confidential. Any unautorized use, reproduction, distribution or disclosure to third parties are strictly forbidden. ABB reservs all rights regarding Intellectual Property Rights. © Copyright 2013 ABB. All rights reserved. 6917 028-PA(A4)Rev1 255 27 30 50 D 470 111 205 C 740 710 220 220 98 6 519 A B 45 39 C/L Top flange 80 332 60 C/L Diverter switch 30 24x 15 E 289 110 C/L Tap selector INSULATION380 1050 SHORT VERSION b) LEVEL kV 650 380,650 750 750 1050 A1711 a)2011 a)1491 a)1791 a) Dimen- sions in mm B 1192 a)1492 a)972 a)1272 a) C 119 a)c) 119 a) 119 a)c) 119 a) D 240 c) 540 240 c) 540 Positions E 5-14 18 15-18 56 (2) 1ZSC004912-AAE No. Shts. Document no. 1 5-18 Pos A Sheet no. Order Revision 82 (1 Phase),E,T XXXX/450-600/C 2015-02-15 Swen Mattsson Language Used in product Approved by Tap-Changer VUCGLB 2015-02-15 Balamurugan N Take over department Modified by PPCO/TK 2015-02-09 Praveenkumar B Title Responsible department Prepared V-2,4..18 Same potential as the diverter switch terminal Shielding rings for insulation levels 650, 750 and 1050 only Only for insulation level 1050 kV Transformer flange Lower ring not for short version a) For mounting on active part use A+106,B+106 and C+106 (See also Drawing 54920103-1) b) Short version means reduced switching capac Please refer to Technical Guide c) Not applicable for 380 kV Contact 10 at 5-10 pos. Contact 12 at 11-12 pos. Contact 14 at 13-14 pos. Contact 16 at 15-16 pos. Contact 18 at 17-18 pos. Only for insulation level 650, 750 and 1050 kV H-1,3..17
Transcript of Tap-Changer VUCGLB Balamurugan N Approved by …...Balamurugan N 2015-02-15 Modified by Take over...
This document is issued by means of
a computerized system.
The digitally stored original is ele
ctronically approved. The
approved document has a date entered
in the `Approved'-field.
A manual signature is not required.
The information contained in this document has to kept strictly
confidential. Any unautorized use, reproduction, distribution
or disclosure to third parties are strictly forbidden.
ABB reservs all rights regarding Intellectual Property Rights.
© Copyright 2013 ABB. All rights reserved.
6917 028-PA(A4)Rev1
255
27
30
50
D
470
111 205
C
740
710
220 220
98
6
519
A
B
4539
C/L Top flange80
332
60
C/L Diverter switch30
24x 15
E
289
110
C/L Tap selector
INSULATION380 1050 SHORT VERSION b)LEVEL kV 650 380,650
750 750 1050
A 1711 a)2011 a)1491 a)1791 a)Dimen-sionsin mm
B 1192 a)1492 a)972 a) 1272 a)
C 119 a)c)119 a) 119 a)c)119 a)
D 240 c) 540 240 c) 540
Positions E
5-14 18
15-18 56
(2)1ZSC004912-AAENo. Shts.Document no.
15-18 PosA
Sheet no.OrderRevision
82 (1 Phase),E,T XXXX/450-600/C2015-02-15Swen Mattsson
LanguageUsed in productApproved by
Tap-Changer VUCGLB2015-02-15Balamurugan N
Take over departmentModified by
PPCO/TK2015-02-09Praveenkumar B
TitleResponsible departmentPrepared
V-2,4..18
Same potential as thediverter switch terminal
Shielding rings forinsulation levels 650,750 and 1050 only
Only for insulation level 1050 kV
Transformer flange
Lower ring not for short version
a) For mounting on active part use A+106,B+106 and C+106 (See also Drawing 54920103-1)b) Short version means reduced switching capacity.Please refer to Technical Guidec) Not applicable for 380 kV
Contact 10 at 5-10 pos.Contact 12 at 11-12 pos.Contact 14 at 13-14 pos.Contact 16 at 15-16 pos.Contact 18 at 17-18 pos.
Only for insulation level 650, 750 and 1050 kV
H-1,3..17
This document is issued by means of
a computerized system.
The digitally stored original is ele
ctronically approved. The
approved document has a date entered
in the `Approved'-field.
A manual signature is not required.
The information contained in this document has to kept strictly
confidential. Any unautorized use, reproduction, distribution
or disclosure to third parties are strictly forbidden.
ABB reservs all rights regarding Intellectual Property Rights.
© Copyright 2013 ABB. All rights reserved.
6917 028-PA(A4)Rev1
R200
36�$�
72�$�
36�$�
45�$�
45�$�
45�$� 22,5�$�
86
232
41
86
41
100
51,5�$�
25,7�$�
86
41
60�$�
60�$�
30�$�
25,7�$�
25,7�$�
20�$�
20�$�
40�$�
20�$�20�$�
100
2210
11
26
ADDITIONAL DRAWINGS:Connection Diagrams:See Technical Guide VUCMounting on active part: 54920103-1Accessories:54920103-2Motor Drive BUL:54830001-1Motor Drive BUE:54830001-2 or -3External Drive Shaft:54920083-4Pressure Relay:54920083-2Bevel Gear:54920083-1
(2)1ZSC004912-AAENo. Shts.Document no.
25-18 PosA
Sheet no.OrderRevision
82 (1 Phase),E,T XXXX/450-600/C2015-02-15Swen Mattsson
LanguageUsed in productApproved by
Tap-Changer VUCGLB2015-02-15Balamurugan N
Take over departmentModified by
PPCO/TK2015-02-09Praveenkumar B
TitleResponsible departmentPrepared
13-14 positions
P-P
17-18 positionsT=9
P-P
5-10 positions
Current collector
Current collector
381
6
94 7
2
510
R240
11-12 positions
P-P
310
94
72
116
18
512
15-16 positions
P-PA
312 5
14
9211
4
136
110
158
716
18
310
9211
4
136
512
714
P-P
312
514
716
11213
4
156
110
178 9
18
A
