*Dimensions of our tanks can vary slightly due to shrinkage variations. All dimensions are approximate

Quality ISO 9001

QEC24048

AS/NZS 4766:2006 SMKP25513SAI GLOBAL

AS 1838 - 1994 Lic SMK40334SAI Global

Quality ISO 9001

QEC24048

1800 68 69 70www.tankworld.com.au

Tankworld I ABN 84 661 692 793 34 Gap Road (P.O. Box 2475) Sunbury Victoria 3429

Tankworld is managed and certified to the ISO9001:2008 international Quality Management Systems standard and our tanks are manufactured and certified to Australian Polyethylene tank standard AS/NZS4766:2006.

All Tankworld tanks are manufactured in Australia using UV stabilised Polyethylene complying with AS/NZS 4020 and AS/NZS 2070.

Tankworld Water Tank

5000 Litre SLR Slimline

Dimensions:

Length: 3180mm

Width: 1080mm

Inlet Height: 2060mm

Total Height: 2060mm

Weight (approx.) 200kg

Tank is supplied standard with:

1 x 300mm inlet strainer

1 x 90mm overflow cap

1 x 90mm overflow

1 x 25mm brass gate valve

1 x 25mm flush spinweld

1 x 25mm hex nipple

• When no fit out is nominated standard fit out will be supplied

• Bucket tap not included with tank

Code: NT5000XXSLIMSLR (Zone 1 & Zone 2) 5000 Litre SLR Slimline – 11 00 gallons

Standard fit out details:

Inlet: Inlet: @ 9 o’clock (left side) – 300mm inlet strainer

Overflow: @ 3 o’clock – 90mm overflow cap (moulded into tank)

Outlet: @ 9 o’clock - 25mm flush spinweld, hex nipple, 25mm brass gate valve

Other fit out options:

Inlet: @ 3 o’clock (right hand side) but in addition with the inlet @ 9 o’clock (extra charge)

Overflow: @ 9 o’clock (moulded into tank)

Outlet: @ 3 o’clock - 25mm flush spinweld, hex nipple, 25mm brass gate valve

• Customer to request fit out on either left or right side of tank if not standard fit out

• Made in any standard COLORBOND® roofing colours

Nylex /Call Centre docs/05.12.14

Inlet @ 9 0’clock

Left side of tank @ 9 o’clock

Hand Holders for moving tank

Front of tank

Nylex Water Tank: 5000 Litre SLR Slimline Code: NT5000XXSLIMSLR (Zone 1 & Zone 2)

Dimensions: Length: 3180mm Width: 1080mm Inlet Height: 2060mm Total Height: 2060mm Weight (approx.) 200kg *Dimensions of our tanks can vary slightly due to shrinkage variations*

Tank is supplied standard with 1 x 300mm inlet strainer 1 x 90mm overflow cap 1 x 90mm overflow 1 x 25mm flush spinweld 1 x 25mm hex nipple 1 x 25mm brass gate valve 1 x 25mm flush spinweld 1 x 25mm plug

Standard fit out details: Inlet: @ 9 o’clock (left side) – 300mm inlet strainer Overflow: @ 3 o’clock – 90mm overflow cap (moulded into tank) Outlet: @ 3 o’clock – 25mm flush spinweld 400mm up from base with 25mm plug (tap no included) Outlet: @ 9 o’clock – 25mm flush spinweld, hex nipple with 25mm brass gate valve

• When no fit out is nominated standard fit out will be supplied

Other fit out options: Inlet: @ 3 o’clock (right hand side) but in addition with the inlet @ 9 o’clock (extra charge) Overflow: @ 9 o’clock (moulded into tank) Outlet: @ 9 o’clock - 25mm flush spinweld 400mm up from base with 25mm plug (tap not included) Outlet: @ 3 o’clock - 25mm flush spinweld, hex nipple, 25mm brass gate valve ** Customer to request fit out on either left or right side of tank if not standard fit out **

Made in any colorbond colours. Our company is managed using and certified to the ISO9001:2008 international Quality Management Systems standard and our tanks are manufactured and certified to Australian Polyethylene tank standard AS4766. Nylex tanks are Australian made, manufactured using high-quality UVstablised food-grade polyethylene certified to: AS4020 & AS2070 potable water and food contact standards and have a 10 year warranty.

Right side overflow @ 3 o’clock

9

6

12

3