Tank & Pipe Linings -...

Tank/pipe linings

Protective & Marine Coatings Europe, Middle East & Africawww.sherwin-williams.com/protectiveEMEA

Tank & Pipe LiningsComprehensive guide to tank & pipe lining protective coatings

Sherwin-Williams tank & pipe linings belong to the portfolio of oil and gas products.

Tank linings are designed to essentially withstand chemical resistance, HTHP (high temperature and high pressure) and mechanical abrasion. Typically for crude or refined products, also for process water or subsea immersion.

Dependent upon the product being stored, the requirements and features of the tank lining varies. Sherwin-Williams tank lining products protect the fabric of the tank itself and ensures that contamination of the product being stored is avoided. These products combine exceptional anticorrosive performance with effective chemical resistance.

Deck coatingsHeat resistant

InsulationPassive fire protection

As Sherwin-Williams coatings are versatile and can be used in many areas please speak to your local Sherwin-Williams representative for the most appropriate tank specification.

Nova-Plate™ 325 can be used as both a high pressure tank and pipe lining.



Quick reference guide

Abrasion/chemical resistance key: 1 = Good, 2 = Better, 3 = Best, 3+ = Premium.

*Nova-Plate™ 325 can be used as both a high pressure tank and pipe lining.

Features

ProductLow temp application

Single leg airless

Single coat system

Mix ratioReturn to

service <24hHTHP service

(150°C)OAP

(Optional)Multiple uses

Abrasion/ chemical

resistance

Crude oilapproval

Nova-Plate™ 325* 10°C • • 2:1 • • • • 3+ •Nova-Plate™ UHS 13°C • • 4:1 • • • • 3 •Magnalux™ 41V • • • 98:2 • • • • 3 •

Dura-Plate™ UHS • • • 4:1 • • • • 2 •Fast Clad™ ER 2°C • • 1:1 • • • • 2 •Phenicon™ HS 13°C • • 4:1 • n/a • • 1 •Epo-Phen™ FF 10°C • • 4:1 • • • • 1 •

TM = is a registered trademark in one or more countries.



Product guide


Magnalux™ 41V

Description Key Features Coating System Approvals Typical Use

Vinyl ester glass flake.

Exceptional protection against: • Aggressive chemicals.• Abrasion.• Elevated temperatures.

Typical specification: Grit blast Sa 2½ 2 x 500µ dft.

Please refer to the chemical resistance guide.

• Above immersion plus acids.

Nova-Plate™ 325*


Solvent free epoxy novalac.

• High temperature high pressure tank lining (HTHP).

• Extends Service Life.• Single coat application.• Extends tank life. • Saves on downtime. • Novolac technology.

Typical specification: Grit blast Sa 2½

1 x 500µ dft.

Norsok M501 System 7C (180ºC). • Oil storage tanks up to 149ºC.• Secondary containment. • Cathodic protection systems.• Ethanol storage tanks.• Tanks and vessels.• Piping and valves.

Nova-Plate™ UHS


Epoxy novolac. • Solvent free epoxy novalac epoxy tank lining.

• Chemical resistance.• Single coat application.• Robust and versatile to cope with crude,

refined oil products, MTBE, hi-aromatic gasolines, ethanol, methanol or ether/fuel blends.

• Suitable for use under thermal insulation.


1 x 500µ dft.

Meets MIL-PRF-23236, Type VII, Class 5, 7, 13, 19, Grade C.

Norsok M501 System 7C (140ºC).

• Crude• Refined• EtOH• MeOH.

*Nova-Plate™ 325 can be used as both a high pressure tank and pipe lining.



Product guide


Fast Clad™ ER with Opti-Check™ Technology


Epoxy amine. • Ultra fast curing: 3 hrs to handle, 24 hrs to immersion service.

• Single coat application. • Opti-Check™ (OAP) technology. • Enhanced edge retention properties • Flexible (5% elongation) low odor,

low VOC.• Solvent free.


1 x 500µ dft.

Approvals: Meets MIL-PRF-23236 Type VII, Class 5, 7, 5/18, 7/18,

13/18, 17, 17/18 Grade C requirements for single and multi-coat seawater, fuel, bilges, and CHT tanks.

• Crude oil storage tanks. • Refined fuel storage tanks. • Pipelines. • Offshore subsea and tanks. • Water ballast tanks. • Crude oil tanks in oil tankers. • Potable water tank interiors.

Phenicon™ HS with Opti-Check™ Technology


Epoxy novolac. • Chemical resistance and cargo versatility.

• Ease of application using standard airless spray equipment.

• Cost effective tank liner.


2 x 125µ dft.


• Crude• Refined• EtOH• MeOH.

Dura-Plate™ UHS with Opti-Check™ Technology


Epoxy amine. • Fast curing to service +/- 4 days. • Single Coat application. • Opti-Check™ (OAP) technology. • Enhanced edge retention properties. • Chemical & abrasion resistance. • Low odour, low VOC.


1 x 500µ dft.

Approvals: Meets MIL-PRF-23236, Type VII, Class 5, 7, 9 and 11,

Grade C; NSF approved to Standard 61 for potable water.

• Refineries, terminals and pipelines, offshore.

• Fuel tanks, nuclear industry. • Dedicated crude storage

tanks and dedicated water ballast tanks.

• Water & waste water treatment plants and storage, storage tank.



Product guide


Epo-Phen™ FF


Epoxy novolac. • Versatile. • Cost effective tank lining for

hydrocarbon cargoes.• Can be used under thermal insulation

at elevated or cryogenic temperatures immersion service in water up to 99ºC and hydrocarbons such as crude (up to 104ºC), gasoline, fuel oil, diesel, ethanol or methanol.


1 x 150µ dft.


• Immersion up to 99ºC.• CUI (Corrosion under insulation).

Protective & Marine Coatings Europe, Middle East & Africa

The Sherwin-Williams CompanyWith over 150 years experience in the coatings industry we understand how critical it is that your investment gives you a quality, long term protection system, which performs in demanding environments.

www.sherwin-williams.com/protectiveEMEA

To learn more, contact usEurope, Middle East & Africa: +44 (0)1204 521771

North America: +1 800 524 5979

Asia: +8 621 5158 7798

[email protected]

www.sherwin-williams.com/protectiveEMEA


©2016 The Sherwin-Williams CompanyProtective & Marine Coatings 9/16 EMEA0113/V04

Tank & Pipe Linings -...

Documents

Transcript of Tank & Pipe Linings -...