Tango tx1 Gas Detection Datasheet
-
Upload
a1-cbiss -
Category
Technology
-
view
164 -
download
0
description
Transcript of Tango tx1 Gas Detection Datasheet
Tango™ TX1Single Gas Detector A 3-year runtime and patent pending DualSense™ Technology increases worker safety, regardless of bump test frequency, while reducing overall costs
Significantly Increases Worker Safety The use of Industrial Scientific’s DualSense™ Technology ensures that,
regardless of your current bump test policy, you will be incomparably
safer with the Tango than with any other single gas detector on the
market today.
Enhanced Battery Life for a 3 Year Life Span The Tango™ TX1 improves on its predecessor, the GasBadge
Plus, allowing a continuous “always-on” mode for three years.
After the battery can no longer support instrument life, it can
be replaced to allow another 3 years of continuous operation
Powerful 100dB Instrument Alarm The detector alarms at 100dB at 10 centimetres making it twice the
volume of Industrial Scientific’s GasBadge and louder than any single
gas detector on the market. Alarm volume can be increased by about
10dB for higher-noise environments with the addition of the optional
AlarmAmp™
KEYBENEFITS• Designed for continuous operation
for three years
• Full 3 year warranty on CO2 & H2S
sensors
• DualSense™ Technology includes two
of the same type sensor for the
detection of a single gas
• Factory-installed sensors warranted to
be free from defects
By wearing the Tango™ TX1, your workers will be the safest single gas detector users in the world
“ “GASESANALYSED
CO SO2 H2SNO2
Cert No. 996ISO 9001
11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HTT: +44(0)151 666 8300 F: +44(0)151 666 8329 E: [email protected] W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com
TECHNICALSPECIFICATION
GAS RANGES• Carbon Monoxide (CO):
0 to 1,000 ppm in 1.0 ppm increments
• Hydrogen Sulphide (H2S):
0 to 200 ppm in 0.1 ppm increments
• Nitrogen Dioxide (NO2):
0 to 150 ppm in 0.1 ppm increments
• Sulpur Dioxide (SO2):
0 to 150 ppm in 0.1 ppm increments
PHYSICAL• Dimensions: 99 x 51 x 35 mm (3.9” x 2.0” x 1.4”)
• Weight: 126.0 g (4.4 oz.)
• Case top: Polycarbonate with a protective rubber
• Case bottom: Conductive polycarbonate
POWER• 3.6 V Primary lithium-thionyl chloride (Li-SOCl2), 1.5Ah,
2/3AA, replaceable & non-rechargeable
ALARMS • Audible alarm: 100 decibel (dB) audible alarm at a
distance of 10 cm (3.94”)
• Visual alarm: Three strobe-emitting visual alarm LEDs
(two red; one blue)
• Vibrating alarm: Standard
PERFORMANCE • Operating temperature range: –20°C to +50°C
(-4°F to +122°F)
• Operating humidity range: 15%-95% Non-condensing
(continuous)
APPROVALS• ATEX: Ex ia I Ma, Ex ia IIC T4 Ga, Equipment Group and
Category: I M1 and II 1G
• IECEx :Ex ia I Ma Ex ia IIC T4 Ga
• UL (C-US): Class I, Groups A, B, C, and D; Class II, Groups E,
F, and G; T4; Exia Class I, Zone 0, AEx ia IIC T4
ORDERINGINFO
Part Number Description
TX1-1 Tango TX1, CO
TX1-2 Tango TX1, H2S
TX1-4 Tango TX1, NO2
TX1-5 Tango TX1, SO2
18109201 iNet DS docking station for Tango*
17154367 Replacement battery
18109171 Soft nylon case, Black
18109239 Soft nylon case, Orange
18109218 Dust barrier kit, 5 pack
18109230 Water barrier kit, 5 pack
17120908 Belt clip
17154915 AlarmAmp™
*Access to data from the iNet DS docking station requires a subscription to iNet or iNet InSite.