Takex LT-1WM Data Sheet

CHARACTERISTICS

180

INFRARED BEAM LANTERN

An excellent alternative when choosing an infrared beam lantern to

protect the close proximity of any building. LT-1WM solves the

installation problems often encountered when trying to wall mount

on buildings, such as downpipes, bay windows, etc. The LT-1WM

can accomodate the TAKEX TE and TK series twin photoelectric

beams.

The ilumination system provides light where the LT-1WM has been

installed.

DISCRETIONAND HARMONY

APPEARANCE AND CONSTRUCTION

TOTAL FLEXIBILITY

TAMPER PROTECTION

HEATERS

MOUNTING KIT

The aesthetic and discreet integration in anyenvironment makes this security solutionneither evident nor conspicuous to possibleintruders. The provision of light and itsdeterrence factor is another obvious benefit.

LT-1WM's external structure is made of aspecial polycarbonate based on threeobjectives: to allow the infrared beams to passthrough easily, to protect these beams againstsolar and ultraviolet radiation and to have astrong product able to resist acts of vandalism.The overall appearance is a Black Lantern thatdisguises the placement of the beams.

LT-1WM's internal structure consists of anextruded aluminum profile, giving total flexibilityin the positioning of the Twin infrared beams aswell as other accessories such as thethermostat, heaters, etc.

LT-1WM is a product that solves a number ofaesthetic problems installers encounter whenthey offer a perimeter protection system.The structure comfortably enables theinstallation of aTAKEX Twin beam unit, in any Txand Rx combination.

The tops are supplied with a tamper switch asstandard to prevent any sabotage.

In order to obtain optimal performance inexternal environments with low temperatureconditions and condensation risk, the towershould be fitted with

A mounting kit including expandable bolts isincluded with lamp: Stainless screws, nylocknuts, wall screws,

one heater.

ceramic bulb holder, etc.

LT-1WM

www.takex.com

Due to on going product improvements, specifications may change without notice.

INFRARED BEAM LANTERN

Measurements expressed in millimeters

DIMENSIONS

OPTIONAL ACCESSORIES

External pole :

Top cap:

Height :

Width:

Weight :

10cm. (3.94).25cm. (9.84).58.45cm. (23).27.4cm 10.84Kg.

( ).

Heater kit.BT-HK12:

MATERIALS

- Aluminum structure.- Black Polycarbonate tube with UV

treatment.- ABS fixing support.- Polycarbonate top cap.- Ceramic bulb holder.

* low wattageBulb not included. Use only bulbs

LT-1WMT

EC

HN

ICA

LS

PE

CIF

ICA

TIO

NS

Note: This sensor is designed to detect movement and to trigger a relay. It is not a burglar-preventing device. TAKEX isnot responsible for damages or losses caused by accidents, thefts, acts of God (including inductive lightning), abuse,misuse, abnormal use, faulty installation or improper maintenance.

TAKEX AMERICA

TAKEX AUSTRALIA

TAKEX JAPAN

California, USA Toll Free: (877) 371-2727 Phone: (408) 747-0100 Fax: (408) 734-1100 [email protected]

Victoria Phone: + 61 (0) 3-9546-0533 Fax: + 61 (0) 3-9547-9450 [email protected]

Queensland Phone: + 61 (0) 7-3891-3344 Fax: + 61 (0) 7-3891-3355 [email protected]

Kyoto, Japan Phone: (075) 594-7211 Fax: (075) 501-2085 [email protected]

TAKEX EUROPE LTD. , UK Phone: +44.1256.475.555 Fax: +44.1256.466.268Hampshire [email protected]

www.takex.com

Takex LT-1WM Data Sheet

Documents

Transcript of Takex LT-1WM Data Sheet