Taiwan Oasis SMD LED Product Lines (CHIP LED). smd led... · Taiwan Oasis SMD LED Product Lines...
Transcript of Taiwan Oasis SMD LED Product Lines (CHIP LED). smd led... · Taiwan Oasis SMD LED Product Lines...
LED0603 LED0603 LED0603
LED1608 LED1608 LED1608
LED3210 LED3210
LED2013
Taiwan Oasis SMD LED Product Lines (CHIP LED)
LED3210
LED2013 LED2013
LED1615 LED1615 LED3227
LED2908
LED3216 LED3216
LED3228 LED3228
LED3228
LED3228
LED2908 LED2908
Taiwan Oasis SMD LED Product Lines (PLCC Type)
LED3216
LED5050 LED5050
LED2808
LED2810
LED3228
I. Taiwan Oasis
III. Lens Color: C - Water Clear D - Color Diffused T - Color Transparent Y - Yellow Diffused (Fluoresce) R - Red Diffused (Fluoresce) W - White Diffused
V:Brightness Code
TO - □□□□□ □ - □⋯⋯ □
I II III IV V
SMD LED Product Code Rule
II. Package Dimension and Lens Type standard 1608T:[1.6*0.8*0.40], Normal Plane 1608B:[1.6*0.8*0.75], Normal Plane 1615B:[1.6*1.5*0.75], Normal Plane 2013B:[2.0*1.25*0.90], Normal Plane 3210A:[3.2*1.01*1.48], Normal Dome 3210B:[3.2*1.01*1.05], Normal Plane 3216A:[3.2*1.6*1.50], Normal Dome 3216B:[3.2*1.6*1.05], Normal Plane 3227B:[3.2*2.7*1.05], Normal Plane 3228B:[3.2*2.8*1.90], Normal Plane 2810S:[2.8*1.0*1.20], Side Emitting 2908S:[2.9*0.8*1.40], Side Emitting others A0603B:[1.6*0.8*0.40], Normal Plane B0603B:[1.6*0.8*0.55], Normal Plane D0805B:[2.0*1.25*1.1], Normal Plane D1206B:[3.2*1.60*1.1], Normal Plane Note:[L*W*H] in mm
IV. Emitting Color Code Single chip V — 405 Violet (InGaN/SiC) B — 468 Blue (InGaN/GaN) BG —505 Bluish Green(InGaN) P — 525 Pure Green (InGaN/GaN) SG — 540 Green (InGaN/SiC) T — 562 True Green(AlGaInP/GaAs) G — 572 Green (GaP) MG — 572 High Bright Green (AlGaInP) Y — 586 Yellow (GaAsP/GaP) MY —590 High Bright Yellow (AlGaInP) MA — 605 High Bright Amber (AlGaInP) A — 606 Amber(GaAsP/GaP) ME — 623 Super Bright Orange(AlGaInP) E — 621 Orange (GaAsP/GaP) MR — 630 Ultra Bright Red (AlGaInP) MRL— 640 Ultra Bright Red (AlGaInP) K — 648 Hi-Orange (GaAlAs/GaAs) H — 660 Hi-Red (GaAlAs/GaAs) S — 660 Super-Red (GaAlAs/GaAs) R —700 Red (GaP) D — X=0.45; Y=0.17 Pink(InGaN) MW —X=0.30,Y=0.29 White(InGaN/GaN) Multi-chip Combination of above chip code
Condition upon product1 DC Operating Life Ta=25℃ Duration, If
2Operation Life Test ofHigh Temperature Humidity Ta= 65℃ RH=90% Duration, If
3Operation Life Test ofHigh Temperature Ta= 55℃ If=30mA Duration, If
4 Pulse operating Life Pulse width=10msecDuty cycle 1/10 Duration, Ifp
5 Thermal Shock -40℃*10mins~100℃*10mins Duration6
Temperature HumidityStorage Ta= 65℃ RH=90% Duration
7 High Temperature Storage Ta= 105℃ Duration8 Low Temperature Storage Ta= -35℃ Duration9 Soldering Pot T=260±5℃ Duration
10 Wave soldering Pre-heat:120 ℃ 10sec Dipping: 260 ℃ 5sec
Duration
11 IR-Reflow Tp=260℃ refer to SMT profile Duration12 Solderbility T=235 ±5℃ Duration13 Ink-soaking Soaked in Ink,Ta=80℃ Duration14 ESD Test HBM/Negtive,Positive/3 times Voltage
Reliability Testing plan Reliability Items
Suggestion IR Reflow Profile for Normal Process
Suggest IR Reflow Profile for Pb Free Process
25
0
Z1
R1
125
165
225
R5
Sec24016214040Z3Z2 Z4
183℃90SECMAX
R2
R4R3
ABOVE220 10-40 Sec
R5
R4R3
R2
R1
255
200
150
25
0
Emitting Dominant ViewingAngle
Color Wavelength IV (mcd) at If(mA) 2θ 1/2
TO-B0603BC-MRE Red 630 Clear 100 20 130
TO-B0603BC-MEE Orange 623 Clear 100 20 130
TO-B0603BC-MAE Amber 605 Clear 100 20 130
TO-B0603BC-MYE Yellow 590 Clear 100 20 130
TO-B0603BC-MGE Green 572 Clear 100 20 130
TO-B0603BC-PF Pure Green 525 Clear 280 20 130
TO-B0603BC-UBF Blue 468 Clear 200 20 130
TO-B0603BY-MWF White X:0.30,Y:0.29 Yellow 280 20 140
Taiwan Oasis CHIP LED Products
Package Representative PartsNumber
LensType
Luminous Intensity Technical DataPdf
Chip LED 0603
文档
文档
李洲科技股份有限公司 Prepared Date: REV:A Page 1/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part NO TO-B0603BC- MR / ME / MA / MY / MG Features 1. Superior brightness with AlInGaP technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. ESD withstanding capacity up to 2 kV 5. RoHS compliant and Lead Free process applicable Absolute Maximum Ratings
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-B0603BC-MR TO-B0603BC-ME TO-B0603BC-MA
TO-B0603BC-MY
TO-B0603BC-MG
75
20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width. Electrical / Optical Characteristics at TA=25℃
Test
Condition VF(V) λd(nm) IV(mcd) 2θ1/2Part
Number DICE
Technical Emitting
color If (mA) Typ Max Typ) min Typ 130
TO-B0603BC-MR AlGalnP Red 20 1.9 2.4 630 50 100 130
TO-B0603BC-ME AlGalnP Orange 20 2.0 2.4 623 50 100 130
TO-B0603BC-MA AlGalnP Amber 20 2.0 2.4 605 50 100 130
TO-B0603BC-MY AlGalnP Yellow 20 2.0 2.4 590 50 100 130
TO-B0603BC-MG AlGalnP Green 20 2.0 2.4 572 50 100 130
*Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
Units:mm
0.750.65
0.75
Divice centerSoldering area
Recommended soldering pattern
Unspecified tolerance:㊣0.1
DIE
CATHODE MARK
0,18BODY(LENS)MOLDING
0.3
0,8
1.08
1,6
0,8
0.55
1
1,18
CATHODE MARK
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted. Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
8.03.5
0.5Reel Direction
1.75
1.5 Cathode2.04.0
0.7
0.2
POLARITY
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-B0603BC-XXLOT NO:LEZ XX XX XXXX
QUANTITY:4000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitting Colo r CodeBrig htness Code
Brightness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:4000PCS
LOT NO:LEZXX XX XXXXPART NO:TO-B0603BC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part NO TO-B0603BC- P/ UB Features 1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Ratings
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-B0603BC-P
TO-B0603BC-UB
105
20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width. Electrical / Optical Characteristics at TA=25℃
Test
Condition VF(V) λd(nm) IV(mcd) Part
Number DICE
Technical Emitting
color If (mA) Typ Max Typ) min Typ
2θ1/2
TO-B0603BC-P
InGaNPure
Green 20 3.3 3.6 525 150 280 130
TO-B0603BC-UB InGaN Blue 20 3.3 3.6 468 150 200 130
*Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
Units:mm
0.750.65
0.75
Divice centerSoldering area
Recommended soldering pattern
Unspecified tolerance:㊣0.1
DIE
CATHODE MARK
0,18BODY(LENS)MOLDING
0.3
0,8
1.08
1,6
0,8
0.55
1
1,18
CATHODE MARK
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted. Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
0 .5R ee l D irec tion
1 .75
1 .5 C athode2.04 .0
0 .7
0 .2
P O LA R ITY
8.03 .5
250
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-B0603BC-XXLOT NO:LEZXX XX XXXX
QUANTITY:4000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness Code
Bri ghtness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:4000PCS
LOT NO:LEZ XX XX XXXXPART NO:TO-B0603BC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
李洲科技股份有限公司 Prepared Date: REV:A Page 1/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No. TO-B0603BY- MW Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-B0603BY-MW 105 20 80 -5 -35~+85 -35~+105 260 / 5 *1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V)
X
Y Iv(mcd) Part
Number Dice
Technical Emitting
color If (mA) Typ Max TYP Min Typ
2θ1/2
TO-B0603BY-MW InGaN White 20 3.3 3.6 0.3 0.29 150 280 140
李洲科技股份有限公司 Prepared Date: REV:A Page 2/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
Units:mm
0.750.65
0.75
Divice centerSoldering area
Recommended soldering pattern
Unspecified tolerance:㊣0.1
DIE
CATHODE MARK
0,18BODY(LENS)MOLDING
0.3
0,8
1.08
1,6
0,8
0.55
1
1,18
CATHODE MARK
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司 Prepared Date: REV:A Page 3/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Chromaticity Diagram
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.80
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
630620
610600
520530
540510
590
580
570
560
550
500
490
480
470460
0.9
A5
A6
A3
A4
A2
A1
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.33
0.34
0.35
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.25
0.24
Color Bins
※ Color Coordinates Measurement allowance is±0.01. ※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
A1 X 0.280 0.268 0.278 0.288 Y 0.248 0.262 0.279 0.262
A2 X 0.288 0.278 0.287 0.296 Y 0.262 0.279 0.295 0.276
A3 X 0.296 0.292 0.309 0.311 Y 0.276 0.286 0.305 0.294
A4 X 0.292 0.287 0.307 0.309 Y 0.286 0.295 0.315 0.305
A5 X 0.311 0.309 0.330 0.330 Y 0.294 0.305 0.329 0.318
A6 X 0.309 0.307 0.330 0.330 Y 0.305 0.315 0.339 0.329
李洲科技股份有限公司 Prepared Date: REV:A Page 4/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 5/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
0 .5R ee l D irec tion
1 .75
1 .5 C athode2.04 .0
0 .7
0 .2
P O LA R ITY
8.03 .5
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-B0603BY-XXLOT NO:LEZ XX XX XXXX
QUANTITY:4000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness Code
Brightness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:4000PCS
LOT NO:LEZXX XX XXXXPART NO:TO-B0603BY-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
Emitting Dominant ViewingAngle
Color Wavelength IV (mcd) at If(mA) 2θ 1/2
TO-1608BC-MRE Red 630 Clear 100 20 130
TO-1608BC-MEE Orange 623 Clear 100 20 130
TO-1608BC-MAE Amber 605 Clear 100 20 130
TO-1608BC-MYE Yellow 590 Clear 100 20 130
TO-1608BC-MGE Green 572 Clear 80 20 130
TO-1608BC-PF Pure Green 525 Clear 280 20 130
TO-1608BC-BF Blue 468 Clear 200 20 130
TO-1608BY-MWF White X:0.30,Y:0.29 Yellow 280 20 140
Taiwan Oasis CHIP LED Products
Package Representative PartsNumber
LensType
Luminous Intensity Technical DataPdf
Chip LED 1608(0603)
文件
文件
文件
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part NO TO-1608BC- MR / ME / MA / MY / MG Features 1. Superior brightness with AlInGaP technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. ESD withstanding capacity up to 2 kV 5. RoHS compliant and Lead Free process applicable Absolute Maximum Ratings
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-1608BC-MR TO-1608BC-ME TO-1608BC-MA
TO-1608BC-MY
TO-1608BC-MG
75
20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width. Electrical / Optical Characteristics at TA=25℃
Test
Condition VF(V) λd(nm) IV(mcd) 2θ1/2Part
Number DICE
Technical Emitting
color If (mA) Typ Max Typ) min Typ 130
TO-1608BC-MR AlGalnP Red 20 1.9 2.4 630 50 100 130
TO-1608BC-ME AlGalnP Orange 20 2.0 2.4 623 50 100 130
TO-1608BC-MA AlGalnP Amber 20 2.0 2.4 605 50 100 130
TO-1608BC-MY AlGalnP Yellow 20 2.0 2.4 590 50 100 130
TO-1608BC-MG AlGalnP Green 20 2.0 2.4 572 30 80 130
*Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
1,60,7
0,8
1,6
Divice centerSoldering area
Recommended soldering pattern
Unspecified tolerance:㊣0.1
0,35 0,35
Units:mm0.75
0.650.75
Cathode mark
0,75PCB
Epoxy resin
Emisson center
0,15
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted. Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
Cathode1.54.0
1.75
4.0
Reel D irection0.5
3.5
0.2
8.0
POLARITY0.7
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-1608BC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:4000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmi tt ing Co lor CodeBrigh tness Code
Brightness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:4000PCS
LOT NO:LEZXX XX XXXXPART NO:TO-1608BC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part NO TO-1608BC- P /B
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable
Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-1608BC-P 105 20 TO-1608BC-B 105 20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-1608BC-P InGaN Pure
Green 20 3.3 3.6 525 150 280 130
TO-1608BC-B InGaN Blue 20 3.3 3.6 468 150 200 130
*Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
Units:mm0.75
0.650.75
0,75PCB
Epoxy resin
Emisson center
0,15 1,60,7
0,8
1,6
Divice centerSoldering area
Recommended soldering pattern
Unspecified tolerance:㊣0.1
0,350,35
Cathode mark
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
Cathode1.54.0
1.75
4.0
Reel D irection0.5
3.5
0.2
8.0
POLARITY0.7
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-1608BC-XXLOT NO:LEZ XX XX XXXX
QUANTITY:4000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness Code
Brightness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:4000PCS
LOT NO:LEZXX XX XXXXPART NO:TO-1608BC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
李洲科技股份有限公司 Prepared Date: REV:A Page 1/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No. TO-1608BY- MW Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-1608BY-MW 105 20 80 -5 -35~+85 -35~+105 260 / 5 *1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V)
X
Y Iv(mcd) Part
Number Dice
Technical Emitting
color If (mA) Typ Max TYP Min Typ
2θ1/2
TO-1608BY-MW InGaN White 20 3.3 3.6 0.3 0.29 150 280 140
李洲科技股份有限公司 Prepared Date: REV:A Page 2/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
1,60,7
0,8
1,6
Divice centerSoldering area
Recommended soldering pattern
Unspecified tolerance:㊣0.1
0,35 0,35
Units:mm0.75
0.650.75
Cathode mark0,75PCB
Epoxy resin
Emisson center
0,15
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Chromaticity Diagram
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.80
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
630620
610600
520530
540510
590
580
570
560
550
500
490
480
470460
0.9
A5
A6
A3
A4
A2
A1
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.33
0.34
0.35
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.25
0.24
李洲科技股份有限公司 Prepared Date: REV:A Page 3/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Color Bins
※ Color Coordinates Measurement allowance is±0.01. ※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
Typical Electrical / Optical Characteristics Curves
A1 X 0.280 0.268 0.278 0.288 Y 0.248 0.262 0.279 0.262
A2 X 0.288 0.278 0.287 0.296 Y 0.262 0.279 0.295 0.276
A3 X 0.296 0.292 0.309 0.311 Y 0.276 0.286 0.305 0.294
A4 X 0.292 0.287 0.307 0.309 Y 0.286 0.295 0.315 0.305
A5 X 0.311 0.309 0.330 0.330 Y 0.294 0.305 0.329 0.318
A6 X 0.309 0.307 0.330 0.330 Y 0.305 0.315 0.339 0.329
李洲科技股份有限公司 Prepared Date: REV:A Page 4/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 5/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
Cathode1.54.0
1.75
4.0
Reel D irection0.5
3.5
0.2
8.0
POLARITY0.7
250
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-1608BY-XXLOT NO:LEZXX XX XXXX
QUANTITY:4000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness Code
Brightness CodeEmitt ing Colo r Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:4000PCS
LOT NO:LEZ XX XX XXXX
PART NO:TO-1608BY-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
Emitting Dominant ViewingAngle
Color Wavelength IV (mcd) at If(mA) 2θ 1/2
Red 630 100 20 130
Amber 605 100 20 130
Red 630 100 20 130
Yellow 572 100 20 130
Red 630 100 20 130
Blue 468 100 20 130
Orange 623 100 20 130
Blue 468 100 20 130
Amber 605 100 20 130
Green 572 100 20 130
Amber 605 100 20 130
Blue 468 100 20 130
Red 630 100 20 130
Pure Green 525 280 20 130
Blue 468 100 20 130
Orange 623 100 20 130
Pure Green 525 100 20 130
Blue 468 100 20 130
Clear
TO-1615BC-MABEE Clear
Chip LED 1615 RGB
TO-1615BC-MRPBEFE Clear
TO-1615BC-MEPBEFE Clear
Taiwan Oasis Chip LED Products
TO-1615BC-MRMGEE Clear
TO-1615BC-MRBEE Clear
TO-1615BC-MAMGEE Clear
TO-1615BC-MRMAEE
Package Representative PartsNumber
LensType
Luminous IntensityTechnical Data Pdf
Chip LED Chip LED Bi-Color
Clear
TO-1615BC-MEBEE
李洲科技股份有限公司 Prepared Date: REV:A Page 1/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-1615BC- MRMA / MRMG / MRB/MEB/MAMG/MAB
Features
1. Superior brightness with AlInGaP/ InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
75 20 TO-1615BC-MRMA 75 20
75 20 TO-1615BC-MRMG 75 20
75 20 TO-1615BC-MRB 105 20
75 20 TO-1615BC-MEB 105 20
75 20 TO-1615BC-MAMG 75 20
75 20 TO-1615BC-MAB 105 20
80 -5 -35~+85 -35~+105 260 / 5
Sec
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Electrical / Optical Characteristics at TA=25℃
Test Conditi
on Vf(V)
λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ
2θ1/2
AlInGaP Red 1.9 2.0 630 50 100TO-1615BC-MRMA AlInGaP Green
20 2.0 2.4 605 50 100
130
AlInGaP Orange 2.0 2.4 630 50 100TO-1615BC-MRMG AlInGaP Blue
20 2.0 2.4 572 50 100
130
AlInGaP Amber 2.0 2.4 630 50 100TO-1615BC-MRB InGaN Prue Green
20 3.3 3.6 468 50 100
130
AlInGaP Orange 2.0 2.4 623 50 100TO-1615BC-MEB InGaN Blue
20 3.3 3.6 468 50 100
130
AlInGaP Amber 2.0 2.4 605 50 100TO-1615BC-MAMG AlInGaP Green
20 2.0 2.4 572 50 100
130
AlInGaP Amber 2.0 2.4 605 50 100TO-1615BC-MAB InGaN Blue
20 3.3 3.6 468 50 100
130
*Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 3/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
1.63
0.20
1,55
1,65
MA
0,7
0,75
0.28
MOLDINGBODY(LENS)
SOLDERINGTERMINAL
1 3
2 4
CATHODE MARK
1
B2 4
3
CATHODE MARK
Units:mmUnspecified tolerance:㊣0.1
Recommended soldering pattern
1.0
1.5
0.45.
0
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 4/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 5/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
Re e l Di r e c t i o n
250
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-1615BC-XXXXLOT NO:LEZ XX XX XXX
QUANTITY:4000PCS
BIN CODE: X XX
DATE:YY/MM/DD XRed Brightness
Green Color Brightness
Green C olor Brightness Red Bright ness
DATE:YY/MM/DD X
BIN CODE: X XX
QUANTITY:4000PCS
LOT NO:LEZ XX XX XXXPART NO:TO-1615BC-XXXXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
李洲科技股份有限公司 Prepared Date: REV:A Page 1/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-1615BC- MRPB/MEPB
Features
1. Superior brightness with AlInGaP/ InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
75 20 105 20 TO-1615BC-MRPB 105 20 75 20
105 20 TO-1615BC-MEPB 105 20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Electrical / Optical Characteristics at TA=25℃
Test Conditi
on Vf(V)
λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ
2θ1/2
AlInGaP Red 1.9 2.4 630 50 100
InGaN Pure Green 3.3 3.6 525 150 280TO-1615BC-MRPB
InGaN Blue
20
3.3 3.6 468 50 100
130
AlInGaP Orange 2.0 2.4 623 50 100
InGaN Pure Green 3.3 3.6 525 50 100TO-1615BC-MEPB
InGaN Blue
20
3.3 3.6 468 50 100
130
*Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 3/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
1.63
0.20
1,55
1,65
MA
0,7
0,75
0.28
MOLDINGBODY(LENS)
SOLDERINGTERMINAL
1 3
2 4
CATHODE MARK
1
B2 4
3
CATHODE MARK
Units:mmUnspecified tolerance:㊣0.1
Recommended soldering pattern
1.0
1.5
0.45.
0
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 4/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 5/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
Re e l Di r e c t i o n
Blue Brightness
Blue Bright ness
250
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-1615BC-XXXXXXLOT NO:LEZ XX XX XXX
QUANTITY:4000PCS
BIN CODE: X X X
DATE:YY/MM/DD XRed Color Brightness
Green Color Brightness
Gree n Brightness Red Bright ness
DATE:YY/MM/DD X
BIN CODE: X X X
QUANTITY:4000PCS
LOT NO:LEZ XX XX XXX
PART NO:TO-1615BC-XXXXXXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
Emitting Dominant ViewingAngle
Color Wavelength IV (mcd) at If (mA) 2θ 1/2
Red 630 100 20 140
Green 572 100 20 140
Red 630 100 20 140
Blue 468 100 20 140
Amber 605 100 20 140
Green 572 100 20 140
Yellow 590 100 20 140
Blue 468 100 20 140
Yellow 590 100 20 140
Green 572 100 20 140
clear
Technical Data Pdf
clear
TO-3227BC-MRMGEE
Chip LED 3227 Bi-Color
Package Representative PartsNumber
TO-3227BC-MYBEE clear
Taiwan Oasis Chip LED Products
clear
TO-3227BC-MRBE clear
TO-3227BC-MYMGEE
TO-3227BC-MAMGEE
LensType
Luminous Intensity
文档
李洲科技股份有限公司 Prepared Date: REV:A Page 1/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-3227BC- MRMG/MRB/MAMG/MYB/MYMG
Features
1. Superior brightness with AlInGaP/ InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
75 20 TO-3227BC-MRMG
75 20 75 20
TO-3227BC-MRB 105 20 75 20
TO-3227BC-MAMG 75 20 75 20
TO-3227BC-MYB 105 20 75 20
TO-3227BC-MYMG 75 20
80 -5 -35~+85 -35~+105 260 / 5
Sec
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Electrical / Optical Characteristics at TA=25℃
Test Conditi
on Vf(V)
λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ
2θ1/2
AlInGaP Red 1.9 2.0 630 50 100TO-3227BC-MRMG
AlInGaP Green 20
2.0 2.4 572 50 100
140
AlInGaP Red 2.0 2.4 630 50 100TO-3227BC-MRB InGaN Blue
20 3.3 3.6 468 50 100
140
AlInGaP Amber 2.0 2.4 605 50 100TO-3227BC-MAMG AlInGaP Green
20 2.0 2.4 572 50 100
140
AlInGaP Yellow 2.0 2.4 590 50 100TO-3227BC-MYB
InGaN Blue 20
3.3 3.6 468 50 100140
AlInGaP Yellow 2.0 2.4 590 50 100TO-3227BC-MYMG
AlInGaP Green 20
2.0 2.4 572 50 100140
*Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 3/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
CATHODE MARK
2,73,
2
R0,25
1,41
0,8
0,79
0,51
0,51
2
MRB
0,48
1,05
DIE
CATHODE MARK
B MR
Units:mmUnspecified tolerance:㊣0.1
Recommended soldering pattern
1.0
1.5
0.4
5.0
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 4/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 5/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
1 .42
0 .20
8 .0
R ee l D irec tion3 .021 .0
4 .0C a thode
1 .54 .0
1 .75
3 .5
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-32278BC-XXXXLOT NO:LEZ XX XX XXX
QUANTITY:3000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XRed Color BrightnessGreen Color Brightness
Green Color Brightness Red Color Brightness
DATE:YY/MM/DD X
BIN CODE: XX X X
QUANTITY:3000PCS
LOT NO:LEZ XX XX XXXPART NO:TO-3227BC-XXXXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
Emitting Dominant ViewingAngle
Color Wavelength IV (mcd) at If(mA) 2θ 1/2
TO-2013BC-MRE Red 630 Clear 100 20 140
TO-2013BC-MEE Orange 623 Clear 100 20 140
TO-2013BC-MAE Amber 605 Clear 100 20 140
TO-2013BC-MYE Yellow 590 Clear 100 20 140
TO-2013BC-MGE Green 572 Clear 100 20 140
TO-2013BC-PF Pure Green 525 Clear 280 20 140
TO-2013BC-BF Blue 468 Clear 200 20 140
TO-2013BY-MWG White X:0.30,Y:0.29 Yellow 560 20 150
Taiwan Oasis Chip LED Products
Package Representative PartsNumber
LensType
Luminous IntensityTechnical Data Pdf
Chip LED 2013
文档
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-2013BC- MR / ME / MA / MY / MG
Features
1. Superior brightness with AlInGaP technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. ESD withstanding capacity up to 2 kV 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-2013BC-MR 75 20 TO-2013BC-ME 75 20 TO-2013BC-MA 75 20
TO-2013BC-MY 75 20
TO-2013BC-MG 75 20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-2013BC-MR AlGaInP Red 20 1.9 2.4 630 50 100 140 TO-2013BC-ME AlGaInP Orange 20 2 2.4 623 50 100 140 TO-2013BC-MA AlGaInP Amber 20 2 2.4 605 50 100 140 TO-2013BC-MY AlGaInP Yellow 20 2 2.4 590 50 100 140 TO-2013BC-MG AlGaInP Green 20 2 2.4 572 50 100 140 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
0.400.90
0.40
MOLDING BODY(LENS)0.40
CATHODE MARK
DIE
PCB
+
-
1.25
2.0
Recommended soldering pattern
Unspecified tolerance:㊣0.1Units:mm
3.8
1.3
1.52 1.52
1.201.0
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
4.04.0
Reel Direction
1,75
3,50
1.3
0.2
2,0
8.0
Cathode
POLARITY
250
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-2013BC-XXLOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness Code
Brigh tnes s CodeE mitt in g Colo r Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:3000PCS
LOT NO:LEZ XX XX XXXXPART NO:TO-2013BC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
李洲科技股份有限公司 Prepared Date: REV:A Page 1/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-2013BC- P / B
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-2013BC-P 105 20 TO-2013BC-B 105 20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-2013BC-P InGaN Pure
Green 20 3.3 3.6 525 150 280 140
TO-2013BC-B InGaN Blue 20 3.3 3.6 468 150 200 140 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
0.400.90
0.40
MOLDING BODY(LENS)0.40
CATHODE MARK
DIE
PCB
+
-
1.25
2.0
Recommended soldering pattern
Unspecified tolerance:㊣0.1Units:mm
3.8
1.3
1.52 1.52
1.201.0
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
4.04.0
Reel Direction
1,75
3,50
1.3
0.2
2,0
8.0
Cathode
POLARITY
250
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-2013BC-XXLOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness Code
B rig htn ess C odeEmitt in g Co lo r Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:3000PCS
LOT NO:LEZ XX XX XXXX
PART NO:TO-2013BC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
sta ticATTENTION:
李洲科技股份有限公司 Prepared Date: REV:A Page 1/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part NO TO-2013BY- MW
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-2013BY-MW 105 20 80 -5 -35~+85 -35~+105 260 / 5 *1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) X Y Iv(mcd)Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Tpy Min Typ2θ1/2
TO-2013BY-MW InGaN White 20 3.3 3.6 0.3 0.29 450 560 150 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
0.400.90
0.40
MOLDING BODY(LENS)0.40
CATHODE MARK
DIE
PCB
+
-
1.25
2.0
Recommended soldering pattern
Unspecified tolerance:㊣0.1Units:mm
3.8
1.3
1.52 1.52
1.201.0
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司 Prepared Date: REV:A Page 3/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Chromaticity Diagram
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.80
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
630620
610600
520530
540510
590
580
570
560
550
500
490
480
470460
0.9
A5
A6
A3
A4
A2
A1
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.33
0.34
0.35
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.25
0.24
Color Bins
※ Color Coordinates Measurement allowance is±0.01. ※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS. Typical Electrical / Optical Characteristics Curves
A1 X 0.280 0.268 0.278 0.288 Y 0.248 0.262 0.279 0.262
A2 X 0.288 0.278 0.287 0.296 Y 0.262 0.279 0.295 0.276
A3 X 0.296 0.292 0.309 0.311 Y 0.276 0.286 0.305 0.294
A4 X 0.292 0.287 0.307 0.309 Y 0.286 0.295 0.315 0.305
A5 X 0.311 0.309 0.330 0.330 Y 0.294 0.305 0.329 0.318
A6 X 0.309 0.307 0.330 0.330 Y 0.305 0.315 0.339 0.329
李洲科技股份有限公司 Prepared Date: REV:A Page 4/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 5/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
4.04.0
Reel Direction
1,75
3,50
1.3
0.2
2,0
8.0
Cathode
POLARITY
250
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-2013BY-XXLOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness Code
Brightness CodeEmi tting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:3000PCS
LOT NO:LEZ XX XX XXXX
PART NO:TO-2013BY-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
Emitting Dominant ViewingAngle
Color Wavelength IV (mcd) at If(mA) 2θ 1/2
TO-3210AC-MRE Red 630 Clear 100 20 140
TO-3210AC-MYE Yellow 590 Clear 100 20 140
TO-3210AC-MGE Green 572 Clear 100 20 140
TO-3210AC-PF Pure Green 525 Clear 280 20 140
TO-3210AC-BE Blue 468 Clear 100 20 140
TO-3210AY-MWG White X:0.30,Y:0.29 Yellow 560 20 150
Taiwan Oasis Chip LED Products
Package Representative PartsNumber
LensType
Luminous Intensity TechnicalData Pdf
Chip LED 3210
文档
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-3210AC- MR / MY / MG
Features
1. Superior brightness with AlInGaP technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. ESD withstanding capacity up to 2 kV 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-3210AC-MR 75 20 TO-3210AC-MY 75 20 TO-3210AC-MG 75 20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-3210AC-MR AlGaInP Red 20 1.9 2.4 630 50 100 140 TO-3210AC-MY AlGaInP Yellow 20 2.0 2.4 590 50 100 140 TO-3210AC-MG AlGaInP Green 20 2.0 2.4 572 50 100 140
*Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
Recommended soldering pattern
SOLDERING TERMINAL
0.50
-R0.5DIE
0.5
MOLDING BODY(LENS)
PCB
CATHODE MARK
+R0.31.48
0.35
0.281.01
0.28
3.2
4.95
1.0
1.59 1.59
Units:mmUnspecified tolerance:± 0. 1
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
C a th o d e
P O L A R IT Y
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-3210AC-XXLOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
DATE:YY/MM/DD X
Brightness Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:3000PCS
LOT NO:LEZXX XX XXXXPART NO:TO-3210AC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
Emitting Color CodeBrightness Code
Emitting Color Code
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part NO TO-3210AC- P / B
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-3210AC-P 105 20 TO-3210AC-B 105 20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-3210AC-P InGaN Pure
Green 20 3.3 3.6 525 150 280 140
TO-3210AC-B InGaN Blue 20 3.3 3.6 468 50 100 140 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
Recommended soldering pattern
SOLDERING TERMINAL
0.50
-R0.5DIE
0.5
MOLDING BODY(LENS)
PCB
CATHODE MARK
+R0.31.48
0.35
0.281.01
0.28
3.2
4.95
1.0
1.59 1.59
Units:mmUnspecified tolerance:± 0. 1
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
C a th o d e
P O L A R IT Y
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-3210AC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
DATE:YY/MM/DD X
Brightness Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:3000PCS
LOT NO:LEZXX XX XXXXPART NO:TO-3210AC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
Emitting Color CodeBrightness Code
Emitting Color Code
李洲科技股份有限公司 Prepared Date: REV:A Page 1/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-3210AY- MW
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-3210AY-MW 105 20 80 -5 -35~+85 -35~+105
260 / 5 Sec
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) X Y Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ 2θ1/2
TO-3210AY-MW InGaN White 20 3.3 3.6 0.3 0.29 140 280 150 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
Recommended soldering pattern
SOLDERING TERMINAL
0.50
-R0.5DIE
0.5
MOLDING BODY(LENS)
PCB
CATHODE MARK
+R0.31.48
0.35
0.281.01
0.28
3.2
4.95
1.0
1.59 1.59
Units:mmUnspecified tolerance:± 0. 1
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司 Prepared Date: REV:A Page 3/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Chromaticity Diagram
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.80
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
630620
610600
520530
540510
590
580
570
560
550
500
490
480
470460
0.9
A5
A6
A3
A4
A2
A1
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.33
0.34
0.35
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.25
0.24
Color Bins
※ Color Coordinates Measurement allowance is±0.01. ※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
A1 X 0.280 0.268 0.278 0.288 Y 0.248 0.262 0.279 0.262
A2 X 0.288 0.278 0.287 0.296 Y 0.262 0.279 0.295 0.276
A3 X 0.296 0.292 0.309 0.311 Y 0.276 0.286 0.305 0.294
A4 X 0.292 0.287 0.307 0.309 Y 0.286 0.295 0.315 0.305
A5 X 0.311 0.309 0.330 0.330 Y 0.294 0.305 0.329 0.318
A6 X 0.309 0.307 0.330 0.330 Y 0.305 0.315 0.339 0.329
李洲科技股份有限公司 Prepared Date: REV:A Page 4/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 5/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
C a th o d e
P O L A R IT Y
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-3210AY-XXLOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
DATE:YY/MM/DD X
Brightness Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:3000PCS
LOT NO:LEZXX XX XXXXPART NO:TO-3210AY-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
Emitting Color CodeBrightness Code
Emitt ing Color Code
Emitting Dominant ViewingAngle
Color Wavelength IV (mcd) at If(mA) 2θ 1/2
TO-3216BC-MRE Red 630 Clear 100 20 140
TO-3216BC-MEE Orange 623 Clear 100 20 140
TO-3216BC-MAE Amber 605 Clear 100 20 140
TO-3216BC-MYE Yellow 590 Clear 100 20 140
TO-3216BC-MGE Green 572 Clear 100 20 140
TO-3216BC-PF Pure Green 525 Clear 280 20 140
TO-3216BC-BF Blue 468 Clear 200 20 140
TO-3216BY-MWF White X:0.30,Y:0.29 Yellow 280 20 160
Taiwan Oasis Chip LED Products
Package Representative PartsNumber
LensType
Luminous Intensity Technical DataPdf
Chip LED 3216(1206)
文档
文档
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-3216BC- MR / ME / MA / MY / MG
Features
1. Superior brightness with AlInGaP technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. ESD withstanding capacity up to 2 kV 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part number mW mA mA V ℃ ℃ ℃ / Sec
TO-3216BC-MR 75 20 TO-3216BC-ME 75 20 TO-3216BC-MA 75 20
TO-3216BC-MY 75 20
TO-3216BC-MG 75 20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) λd (nm)
Iv(mcd) Part number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-3216BC-MR AlGaInP Red 20 1.9 2.4 630 50 100 140 TO-3216BC-ME AlGaInP Orange 20 2.0 2.4 623 50 100 140 TO-3216BC-MA AlGaInP Amber 20 2.0 2.4 605 50 100 140 TO-3216BC-MY AlGaInP Yellow 20 2.0 2.4 590 50 100 140 TO-3216BC-MG AlGaInP Green 20 2.0 2.4 572 50 100 140 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
4.95
1.6
1.59 1.59
0,5 0,5
Cathode mark1,05
2
PCB
Epoxy resin
0,5
Emisson center
Recommended soldering pattern
Unspecified tolerance:㊣0.1Units:mm
3,2
1,6
3,2
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
1 .11 .3
0 .2
3 .5
1 .7 5
2 .0
8 .0
R E E L D IR E C T IO N
1 .54 .0
P O L A R IT Y
C A T H O D E4 .0
250
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-3216BC-XXLOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness Code
Brightness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:3000PCS
LOT NO:LEZ XX XX XXXX
PART NO:TO-3216BC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-3216BC- P / B
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-3216BC-P 105 20 TO-3216BC-B 105 20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-3216BC-P InGaN Pure
Green 20 3.3 3.6 525 150 280 120
TO-3216BC-B InGaN Blue 20 3.3 3.6 468 150 200 120 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
4.95
1.6
1.59 1.59
0,5 0,5
Cathode mark1,05
2
PCB
Epoxy resin
0,5
Emisson center
Recommended soldering pattern
Unspecified tolerance:㊣0.1Units:mm
3,2
1,6
3,2
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
1 .11 .3
0 .2
3 .5
1 .7 5
2 .0
8 .0
R E E L D IR E C T IO N
1 .54 .0
P O L A R IT Y
C A T H O D E4 .0
250
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-3216BC-XXLOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness Code
Brightness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:3000PCS
LOT NO:LEZ XX XX XXXXPART NO:TO-3216BC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
李洲科技股份有限公司 Prepared Date: REV:A Page 1/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-3216BY- MW
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-3216BY-MW 105 20 80 -5 -35~+85 -35~+105 260 / 5 *1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) X Y Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-3216BY-MW InGaN White 20 3.3 3.6 0.3 0.29 150 280 160 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
4.95
1.6
1.59 1.59
0,5 0,5
Cathode mark1,05
2
PCB
Epoxy resin
0,5
Emisson center
Recommended soldering pattern
Unspecified tolerance:㊣0.1Units:mm
3,2
1,6
3,2
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司 Prepared Date: REV:A Page 3/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Chromaticity Diagram
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.80
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
630620
610600
520530
540510
590
580
570
560
550
500
490
480
470460
0.9
A5
A6
A3
A4
A2
A1
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.33
0.34
0.35
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.25
0.24
Color Bins
※ Color Coordinates Measurement allowance is±0.01. ※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
A1 X 0.280 0.268 0.278 0.288 Y 0.248 0.262 0.279 0.262
A2 X 0.288 0.278 0.287 0.296 Y 0.262 0.279 0.295 0.276
A3 X 0.296 0.292 0.309 0.311 Y 0.276 0.286 0.305 0.294
A4 X 0.292 0.287 0.307 0.309 Y 0.286 0.295 0.315 0.305
A5 X 0.311 0.309 0.330 0.330 Y 0.294 0.305 0.329 0.318
A6 X 0.309 0.307 0.330 0.330 Y 0.305 0.315 0.339 0.329
李洲科技股份有限公司 Prepared Date: REV:A Page 4/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 5/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
1 .11 .3
0 .2
3 .5
1 .7 5
2 .0
8 .0
R E E L D IR E C T IO N
1 .54 .0
P O L A R IT Y
C A T H O D E4 .0
250
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-3216BY-XXLOT NO:LEZXX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness Code
Brightness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:3000PCS
LOT NO:LEZ XX XX XXXXPART NO:TO-3216BY-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
Emitting Dominant ViewingAngle
Color Wavelength IV (mcd) at If(mA) 2θ 1/2
TO-2808SY-MWG White X:0.30,Y:0.29 Yellow 670 20 115
Taiwan Oasis Side View LED Products
Package Representative PartsNumber
LensType
Luminous Intensity Technical DataPdf
Side View LED 2808
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-2808SY- MW
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-2808SY-MW 105 20 80 -5 -35~+85 -35~+105 260 / 5 *1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) X Y Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ 2θ1/2
TO-2808SY-MW InGaN White 20 3.3 3.6 0.3 0.29 400 670 140 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Chromaticity Diagram
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.80
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
630620
610600
520530
540510
590
580
570
560
550
500
490
480
470460
0.9
A5
A6
A3
A4
A2
A1
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.33
0.34
0.35
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.25
0.24
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Color Bins
※ Color Coordinates Measurement allowance is±0.01. ※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
Typical Electrical / Optical Characteristics Curves
A1 X 0.280 0.268 0.278 0.288 Y 0.248 0.262 0.279 0.262
A2 X 0.288 0.278 0.287 0.296 Y 0.262 0.279 0.295 0.276
A3 X 0.296 0.292 0.309 0.311 Y 0.276 0.286 0.305 0.294
A4 X 0.292 0.287 0.307 0.309 Y 0.286 0.295 0.315 0.305
A5 X 0.311 0.309 0.330 0.330 Y 0.294 0.305 0.329 0.318
A6 X 0.309 0.307 0.330 0.330 Y 0.305 0.315 0.339 0.329
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Emitting Dominant ViewingAngle
Color Wavelength IV (mcd) at If(mA) 2θ 1/2
TO-2810SY-MWG White X:0.30,Y:0.29 Yellow 800 20 120
Taiwan Oasis Side View LED Products
Package Representative PartsNumber
LensType
Luminous Intensity Technical DataPdf
Side View LED 2810
李洲科技股份有限公司 Prepared Date: REV:A Page 1/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-2810SY- MW
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-2810SY-MW 105 20 80 -5 -35~+85 -35~+105 260 / 5 *1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) X Y Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ 2θ1/2
TO-2810SY-MW InGaN White 20 3.3 3.6 0.3 0.29 400 800 120 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
Cathode mark
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Chromaticity Diagram
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.80
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
630620
610600
520530
540510
590
580
570
560
550
500
490
480
470460
0.9
A5
A6
A3
A4
A2
A1
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.33
0.34
0.35
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.25
0.24
李洲科技股份有限公司 Prepared Date: REV:A Page 3/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Color Bins
※ Color Coordinates Measurement allowance is±0.01. ※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
Typical Electrical / Optical Characteristics Curves
A1 X 0.280 0.268 0.278 0.288 Y 0.248 0.262 0.279 0.262
A2 X 0.288 0.278 0.287 0.296 Y 0.262 0.279 0.295 0.276
A3 X 0.296 0.292 0.309 0.311 Y 0.276 0.286 0.305 0.294
A4 X 0.292 0.287 0.307 0.309 Y 0.286 0.295 0.315 0.305
A5 X 0.311 0.309 0.330 0.330 Y 0.294 0.305 0.329 0.318
A6 X 0.309 0.307 0.330 0.330 Y 0.305 0.315 0.339 0.329
李洲科技股份有限公司 Prepared Date: REV:A Page 4/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 5/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-2810SY-XXLOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness CodeFORWARD VOLTAGE
FORWARD VOLTAGEBrightness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX XX
QUANTITY:3000PCS
LOT NO:LEZXX XX XXXXPART NO:TO-2810SY-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
Emitting Dominant ViewingAngle
Color Wavelength IV (mcd) at If(mA) 2θ 1/2
TO-2908SC-MRE Red 630 Clear 100 20 120
TO-2908SC-MGE Green 572 Clear 100 20 120
TO-2908SC-PF Pure Green 525 Clear 280 20 120
TO-2908SC-BE Blue 468 Clear 100 20 120
TO-2908SY-MWG White X:0.30,Y:0.29 Yellow 280 20 120
Taiwan Oasis Side View LED Products
Package Representative PartsNumber
LensType
Luminous Intensity Technical DataPdf
Side View LED 2908
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-2908SC- MR / MG
Features
1. Superior brightness with AlInGaP technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. ESD withstanding capacity up to 2 kV 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-2908SC-MR 75 20 TO-2908SC-MG 75 20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-2908SC-MR AlGaInP Red 20 1.9 2.4 630 50 100 120 TO-2908SC-MG AlGaInP Green 20 2.0 2.4 572 50 100 120 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
Cathode mark
Umit:mmUnspecified tolerance:㊣0.1
Recommended soldering pattern
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
250
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-2908SC-XXLOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness CodeFORWARD VOLTAGE
FORWARD VOLTAGEBrightness CodeEmitt ing Colo r Code
DATE:YY/MM/DD X
BIN CODE: XX XX XX
QUANTITY:3000PCS
LOT NO:LEZ XX XX XXXX
PART NO:TO-2908SC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part NO TO-2908SC- P / B
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-2908BC-P 105 20 TO-2908BC-B 105 20
80 -5 -35~+85 -35~+105 260 / 5
Sec *1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-2908BC-P InGaN Pure
Green 20 3.3 3.6 525 140 280 120
TO-2908BC-B
InGaN Blue 20 3.3 3.6 468 50 100 120
*Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
Cathode mark
Umit:mmUnspecified tolerance:㊣0.1
Recommended soldering pattern
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-2908SC-XX
LOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX XX
DATE:YY/MM/DD XE mitting Color CodeBr ightne ss CodeF OR WA RD V OLTAGE
FORWARD VOLTAGEBrightness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX XX
QUANTITY:3000PCS
LOT NO:LEZ XX XX XXXX
PART NO:TO-2908SC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
李洲科技股份有限公司 Prepared Date: REV:A Page 1/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-2908SY- MW
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-2908SY-MW 105 20 80 -5 -35~+85 -35~+105 260 / 5 *1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) X Y Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ 2θ1/2
TO-2908SY-MW InGaN White 20 3.3 3.6 0.3 0.29 150 280 120 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
Cathode mark
Umit:mmUnspecified tolerance:㊣0.1
Recommended soldering pattern
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司 Prepared Date: REV:A Page 3/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Chromaticity Diagram
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.80
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
630620
610600
520530
540510
590
580
570
560
550
500
490
480
470460
0.9
A5
A6
A3
A4
A2
A1
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.33
0.34
0.35
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.25
0.24
Color Bins
※ Color Coordinates Measurement allowance is±0.01. ※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
A1 X 0.280 0.268 0.278 0.288 Y 0.248 0.262 0.279 0.262
A2 X 0.288 0.278 0.287 0.296 Y 0.262 0.279 0.295 0.276
A3 X 0.296 0.292 0.309 0.311 Y 0.276 0.286 0.305 0.294
A4 X 0.292 0.287 0.307 0.309 Y 0.286 0.295 0.315 0.305
A5 X 0.311 0.309 0.330 0.330 Y 0.294 0.305 0.329 0.318
A6 X 0.309 0.307 0.330 0.330 Y 0.305 0.315 0.339 0.329
李洲科技股份有限公司 Prepared Date: REV:A Page 4/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 5/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-2908SY-XXLOT NO:LEZ XX XX XXXX
QUANTITY:3000PCS
BIN CODE: XX XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness CodeFORWARD VOLTAGE
FORWARD VOLTAGEBrightness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX XX
QUANTITY:3000PCS
LOT NO:LEZ XX XX XXXXPART NO:TO-2908SY-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
Emitting Dominant ViewingAngle
Color Wavelength IV (mcd) at If(mA) 2θ 1/2
TO-3228BC-MRF Red 630 Clear 200 20 140
TO-3228BC-MAF Amber 605 Clear 280 20 140
TO-3228BC-MEF Orange 623 Clear 280 20 140
TO-3228BC-MYF Yellow 590 Clear 280 20 140
TO-3228BC-MGE Green 572 Clear 100 20 140
TO-3228BC-PG Pure Green 525 Clear 800 20 140
TO-3228BC-BF Blue 468 Clear 230 20 140
TO-3228BY-MWH-E White X:0.30,Y:0.29 Yellow 280 20 120
Red 630 100 20 120
Green 572 100 20 120
Red 630 100 20 120
Blue 468 100 20 120
Red 630 280 20 120
Pure Green 525 280 20 120
Red 630 200 20 120
Pure Green 525 500 20 120
Blue 468 80 20 120
Orange 623 280 20 120
Pure Green 525 660 20 120
Blue 468 100 20 120
Clear
TO-3228BC-MEPBFGE Clear
Technical DataPdf
TOPLED 3228 (1210) PLCC II
TOPLED 3228 (1210) PLCC IV RGB
TO-3228BC-MRPBFGE
LensType
Luminous Intensity
Clear
TO-3228 BC-MRPFF Clear
TO-3228 BC-MRBEE
Taiwan Oasis TOP LED Products
TOPLED 3228 (1210) PLCC IV Bi-Color
TO-3228 BC-MRMGEE Clear
Package Representative PartsNumber
文档
文档
李洲科技股份有限公司 Prepared Date: REV:A Page 1/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part NO TO-3228 BC- MR / ME / MA / MY / MG
Features
1. Superior brightness with AlInGaP technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. ESD withstanding capacity up to 2 kV 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-3228BC-MR 75 20 TO-3228BC-ME 75 20
TO-3228BC-MA 75 20
TO-3228BC-MY 75 20
TO-3228BC-MG 75 20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-3228BC-MR AlGaInP Red 20 1.9 2.4 630 150 200 140 TO-3228BC-ME AlGaInP Orange 20 2.0 2.4 623 150 280 140 TO-3228BC-MA AlGaInP Amber 20 2.0 2.4 605 150 280 140 TO-3228BC-MY AlGaInP Yellow 20 2.0 2.4 590 150 280 140 TO-3228BC-MG AlGaInP Green 20 2.0 2.4 572 50 100 140 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions 3,
2
3,5
2,8
0,9
1,90,95
Soldering area
Recommended soldering pattern
Divice center
Units:mmUnspecified tolerance:㊣0.1
2,8
3,43
Cathode mark
0,2
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
0 .24 .0
2 .0 2 .2
8 .0MAX.5 ∼
C athode
P O LA R IT Y
3.8
4 .0
R ee l D irec tion
3 .5
1 .75
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-3228BC-XXLOT NO:LEZ XX XX XXXX
QUANTITY:2000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitt ing Color CodeBri ghtness Code
Brightness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:2000PCS
LOT NO:LEZXX XX XXXXPART NO:TO-3228BC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part NO TO-3228BY- P/B
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-3228BC-P 105 20 TO-3228BC-B 105 20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-3228BC-P InGaN Prue
Green 20 3.3 3.6 525 420 800 140
TO-3228BC-B InGaN Blue 20 3.3 3.6 468 150 230 140 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
3,2
3,5
2,8
0,9
1,90,95
Soldering area
Recommended soldering pattern
Divice center
Units:mmUnspecified tolerance:㊣0.1
2,8
3,43
Cathode mark
0,2
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
0 .24 .0
2 .0 2 .2
8 .0MAX.5 ∼
C athode
P O LA R IT Y
3.8
4 .0
R ee l D irec tion
3 .5
1 .75
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-3228BC-XXLOT NO:LEZ XX XX XXXX
QUANTITY:2000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitt ing Color CodeBrightness Code
Brightness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:2000PCS
LOT NO:LEZXX XX XXXXPART NO:TO-3228BC-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
李洲科技股份有限公司 Prepared Date: REV:A Page 1/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part NO TO-3228BY- MW
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-3228BY-MW 105 20 80 -5 -35~+85 -35~+105 260 / 5 *1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) X Y Iv(mcd)Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-3228BY-MW InGaN White 20 3.3 3.6 0.3 0.29 150 280 120 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
3,2
3,5
2,8
0,9
1,90,95
Soldering area
Recommended soldering pattern
Divice center
Units:mmUnspecified tolerance:㊣0.1
2,8
3,43
Cathode mark
0,2
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司 Prepared Date: REV:A Page 3/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Chromaticity Diagram
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.80
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
630620
610600
520530
540510
590
580
570
560
550
500
490
480
470460
0.9
A5
A6
A3
A4
A2
A1
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.33
0.34
0.35
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.25
0.24
Color Bins
※ Color Coordinates Measurement allowance is±0.01. ※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
A1 X 0.280 0.268 0.278 0.288 Y 0.248 0.262 0.279 0.262
A2 X 0.288 0.278 0.287 0.296 Y 0.262 0.279 0.295 0.276
A3 X 0.296 0.292 0.309 0.311 Y 0.276 0.286 0.305 0.294
A4 X 0.292 0.287 0.307 0.309 Y 0.286 0.295 0.315 0.305
A5 X 0.311 0.309 0.330 0.330 Y 0.294 0.305 0.329 0.318
A6 X 0.309 0.307 0.330 0.330 Y 0.305 0.315 0.339 0.329
李洲科技股份有限公司 Prepared Date: REV:A Page 4/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 5/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
0 .24 .0
2 .0 2 .2
8 .0MAX.5 ∼
C athode
P O LA R IT Y
3.8
4 .0
R ee l D irec tion
3 .5
1 .75
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-3228BY-XXLOT NO:LEZ XX XX XXXX
QUANTITY:2000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XEmitting Color CodeBrightness Code
Brightness CodeEmitting Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:2000PCS
LOT NO:LEZXX XX XXXXPART NO:TO-3228BY-XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
李洲科技股份有限公司 Prepared Date: REV:A Page 1/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part NO TO-3228BC- MRMG / MRB / MRP
Features
1. Superior brightness with AlInGaP/ InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part number mW mA mA V ℃ ℃ ℃ / Sec
75 20 TO-3228BC-MRMG 75 20
75 20 TO-3228BC-MRB 105 20
75 20 TO-3228BC-MRP 105 20
80 -5 -35~+85 -35~+105 260 / 5
Sec
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Conditi
on Vf(V)
λd (nm)
Iv(mcd) Part number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ
2θ1/2
AlInGaP Red 1.9 2.0 630 50 100TO-3228BC-MRMG AlInGaP Green
20 2.0 2.4 572 50 100
120
AlInGaP Red 2.0 2.4 630 50 100TO-32286BC-MRB InGaN Blue
20 3.3 3.6 468 50 100
120
AlInGaP Amber 2.0 2.4 630 140 280TO-3228BC-MRP InGaN Prue Green
20 3.3 3.6 525 140 280
120
*Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
0,2
0,8
2,2
4 3
21
3,5
3,2
2,8
2,8
3,43
Soldering area
Recommended soldering pattern
Divice center
Umit:mmUnspecified tolerance:㊣0.1
MGMR
4 3
21
0,9
0,95
1,9
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted. Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/5 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
0 .24 .0
2 .0 2 .2
8 .0M A X .5 ∼
3 .8
4 .0
R e e l D ir e c t io n
3 .5
1 .7 5
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-3228BC-XXXX
LOT NO:LEZ XX XX XXX
QUANTITY:2000PCS
BIN CODE: XX XX
DATE:YY/MM/DD XAmber Color B rightnessGreen Color B rightness
Green Color Brightness Amber Color Brightness
DATE:YY/MM/DD X
BIN CODE: X X X X
QUANTITY:2000PCS
LOT NO:LEZ XX XX XXXPART NO:TO-3228BC-XXXXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-3228BC- MRPB / MEPB
Features
1. Superior brightness with AlInGaP/ InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
75 20 105 20 TO-3228BC-MRPB 105 20 75 20
105 20 TO-3228BC-MEPB 105 20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Conditi
on Vf(V)
λd (nm)
Iv(mcd) Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ
2θ1/2
AlInGaP Red 1.9 2.0 630 150 200InGaN Pure Green 3.3 3.6 525 450 500TO-3228BC-MRPB
InGaN Blue
20
3.3 3.6 468 30 80
120
AlInGaP Orange 2.0 2.4 623 150 280
InGaN Pure Green 3.3 3.6 525 420 660TO-3228BC-MEPB
InGaN Blue
20
3.3 3.6 468 50 100
120
*Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
Units:mmUnspecified tolerance:㊣0.1
Divice center
Recommended soldering pattern
Soldering area
3,43
2,8
2,2
0,8
0,2
1,9
0,95
0,9
4
MR/ME BP1 324 3
21
3,5
3,2
2,8
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
0 .24 .0
2 .0 2 .2
8 .0M A X .5 ∼
3 .8
4 .0
R e e l D ir e c t io n
3 .5
1 .7 5
ATTENTION:static
PART NO:TO-3228BC-XXXXXXLOT NO:LEZ XX XX XXX
QUANTITY:2000PCS
BIN CODE: X X X
DATE:YY/MM/DD XRed Brig htness
Green Brigh tness
Green Color Brightness Red Color Brightness
DATE:YY/MM/DD X
BIN CODE: X X X
QUANTITY:2000PCS
LOT NO:LEZ XX XX XXXPART NO:TO-3228BC-XXXXXX
staticATTENTION:
250
Blue Brightness
Blue Brightness
Emitting Dominant ViewingAngle
Color Wavelength IV (mcd) at If (mA) 2θ 1/2
TO-5050BY-3MWM White X:0.30,Y:0.29 Yellow 1700 20 140
Red 630 280 20 110Pure Green 525 670 20 110
Blue 468 280 20 110Orange 623 280 20 110
Pure Green 525 670 20 110Blue 468 280 20 110
TO-5050BC-MEPBFGF Clear
Taiwan Oasis TOP LED Products
Package Representative PartsNumber
LensType
Luminous IntensityTechnical Data Pdf
TOPLED 5050 RGB
TO-5050BC-MRPBFGF Clear
TOPLED 5050 White
李洲科技股份有限公司 Prepared Date: REV:A Page 1/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-5050BY- 3MW
Features
1. Superior brightness with InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part Number mW mA mA V ℃ ℃ ℃ / Sec
TO-5050BC-3MW 105 20 80 -5 -35~+85 -35~+105 260 / 5 *1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Condition
Vf(V) X Y Iv(mcd)Part Number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ2θ1/2
TO-5050BC-3MW InGaN White 20 3.3 3.6 0.3 0.29 800 1700 140 *Luminous Intensity measurement allowance is ±15%. *Wave length: the typical accuracy is ±2nm.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions
3
CATHODE MARK C1.0
5.0
5. 0
2
4
5
6
0, 2
1
2
343
1
2,4
3
Recommended soldering pattem
Units:mmUnspecified tolerance:± 0. 1
55,4
6.4
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
李洲科技股份有限公司 Prepared Date: REV:A Page 3/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Chromaticity Diagram
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.80
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
630620
610600
520530
540510
590
580
570
560
550
500
490
480
470460
0.9
A5
A6
A3
A4
A2
A1
0.34
0.33
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.33
0.34
0.35
0.32
0.31
0.30
0.29
0.28
0.27
0.26
0.25
0.24
Color Bins
※ Color Coordinates Measurement allowance is±0.01. ※ One delivery will include up to six consecutive color bins
The quantity-ratio of the bins is decided by OASIS.
Typical Electrical / Optical Characteristics Curves
A1 X 0.280 0.268 0.278 0.288 Y 0.248 0.262 0.279 0.262
A2 X 0.288 0.278 0.287 0.296 Y 0.262 0.279 0.295 0.276
A3 X 0.296 0.292 0.309 0.311 Y 0.276 0.286 0.305 0.294
A4 X 0.292 0.287 0.307 0.309 Y 0.286 0.295 0.315 0.305
A5 X 0.311 0.309 0.330 0.330 Y 0.294 0.305 0.329 0.318
A6 X 0.309 0.307 0.330 0.330 Y 0.305 0.315 0.339 0.329
李洲科技股份有限公司 Prepared Date: REV:A Page 4/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 5/6 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
4 .0 0 2 .0 0
8 .0 0
1 .7 5
5 .5 0
1 2 .0 0
? 1 .5 0
? 1 .5 0
5 .3 0
5∼2 .3 0
5 .3 0
7∼
E mitt ing Color Code
DATE:YY/MM/DD X
BIN CODE: XX XX
QUANTITY:1000PCS
LOT NO:LEZXX XX XXXX
PART NO:TO-5050BY-3XXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250
李洲科技股份有限公司 Prepared Date: REV:A Page 1/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Part No TO-5050BC- MRPB / MEPB
Features
1. Superior brightness with AlInGaP/ InGaN technology 2. Ideal for automated SMT process 3. Excellent reliability profile 4. High ESD withstanding capacity 5. RoHS compliant and Lead Free process applicable Absolute Maximum Rating
Pd If Ifp*1 Vr Top Tstg Tsol Part number mW mA mA V ℃ ℃ ℃ / Sec
75 20 105 20 TO-5050BC-MRPB 105 20 75 20
105 20 TO-5050BC-MEPB 105 20
80 -5 -35~+85 -35~+105 260 / 5
*1.Condition for IFP is pulse of 1 / 10 duty and 0.1 m sec width.
Electrical / Optical Characteristics at TA=25℃
Test Conditi
on Vf(V)
λd (nm)
Iv(mcd) Part number
Dice Technical
Emittingcolor
If (mA) Typ Max Typ Min Typ
2θ1/2
AlInGaP Red 1.9 2.4 630 140 280InGaN Pure Green 3.3 3.6 525 400 670TO-5050BC-MRPB
InGaN Blue
20
3.3 3.6 468 140 280
110
AlInGaP Orange 2.0 2.4 623 140 280
InGaN Pure Green 3.3 3.6 525 400 670TO-5050BC-MEPB
InGaN Blue
20
3.3 3.6 468 140 280
110
*Luminous Intensity measurement allowance is ±15%.
李洲科技股份有限公司 Prepared Date: REV:A Page 2/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
*Wave length: the typical accuracy is ±2nm.
Package Dimensions
ANODE MARK C1. 0
5.0
5. 0
0, 2
± 0. 1
Note: 1. All dimensions are in millimeters.
2. Tolerance is ±0.1mm unless otherwise noted.
Typical Electrical / Optical Characteristics Curves
李洲科技股份有限公司 Prepared Date: REV:A Page 3/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
李洲科技股份有限公司 Prepared Date: REV:A Page 4/4 TAIWAN OASIS TECHNOLOGY CO.,LTD 2006/09/28 Prepared by:W.L.Y
Package Dimensions of Tape and Reel (Units: mm)
4 .0 0 2 .0 0
8 .0 0
1 .7 5
5 .5 0
1 2 .0 0
? 1 .5 0
? 1 .5 0
5 .3 0
5∼2 .3 0
5 .3 0
7∼
ATTENTION:static
TAIWAN OASIS TECHNOLOGY CO.,LTDPART NO:TO-5050BC-XXXXXXLOT NO:LEZ XX XX XXXX
QUANTITY:1000PCS
BIN CODE: XX XX XX
DATE:YY/MM/DD XR ed Color BrightnessGreen C olor BrightnessBlue Color Brig htness
Blue Color BrightnessGreen Color Brightness Red Color Brightness
DATE:YY/MM/DD X
BIN CODE: XX XX XX
QUANTITY:1000PCS
LOT NO:LEZ XX XX XXXXPART NO:TO-5050BC-XXXXXXTAIWAN OASIS TECHNOLOGY CO.,LTD
staticATTENTION:
250