TAIP, Ethernet GPS Settings - · PDF fileTAIP, Ethernet GPS Settings Wireless Mobiledata, Inc...

TAIP, Ethernet GPS SettingsWireless Mobiledata, Inc 650 726 7791 www.wirelessmobiledata.com

From the Ace Manager Window, select SERVER 1


Enter the IP address of your GPS Server, example: 72.55.129.21


Enter the port number of your GPS Server, example: 1091

75.55.129.21


Enter the report interval in seconds, example 30 for updates every 30 seconds,60 for updates every 60 seconds etc

75.55.129.21

1091


Enter the report distance in 100 meters. This is the distance the vehicle willtravel before an update is sent. Thus a TIME (**PPTIME) or DISTANCE(**PPDIST) setting can be obtained. Example: 10 (10x100= 1000 meters)

75.55.129.21

1091

30


Enter the stationary time in minutes. This is the time the vehicle will send areport when it has not moved. Example: 25. This means every 25 minutes alocation report will be sent if the vehicle has not moved

75.55.129.21

1091

30

10


Select Message Type from the pull down menu. In this example select F0 – TAIP Data

75.55.129.21

1091

30

10

25


Select Message Type from the pull down menu. In this example select F0 – TAIP Data

75.55.129.21

1091

30

10

25

F0


Local Serial GPS Settings

From the Ace Manager Window, select COMMON, Serial



Enter the data speed for you application. Example, if usingMS Streets and Trips, enter 4800,8N1


Local Serial GPS Settings Local Serial GPS Settings

Enter the data speed for you application. Example, if usingMS Streets and Trips, enter 4800,8N1

4800,8N1



From the Ace Manager Window, select GPS-SERIAL PORT



*PPLATS set for 1

1



1

**PPLATSR: From the pull down menu, select E1- NMEA- GGA-VTG-RMC



1

E1

**PGPS: From the pull down menu, select 1-DB9 Serial(Assumption your Serial cable connection is a DB-9)


Local Serial GPS Settings Local Serial GPS Settings

1

E1

**PGPS: From the pull down menu, select 1-DB9 Serial(Assumption your Serial cable connection is a DB-9)

1


1

E1

**PGPSR: From the pull down menu, select E-1(Assumption your local computer software is NMEA protocol)

1



1

E1

1


E1

Set other fields as shownThis completes the set up for the first modem


Write the configuration to the modem


Reset the modem


Save the configuration to your local computer


Push the configuration file to other modems

Connect to the new modem using Ethernet or Serial interface.Ethernet default is 192.168.13.31

192.168.13.31Ethernet

Serial



Load the configuration file from your local computer



Write the configuration file to the new modem



Reset the modem. Test that you have Ethernet connection to theInternet and local GPS using either Streets and Trips **OR** Hyperterminal

TAIP, Ethernet GPS Settings - · PDF fileTAIP, Ethernet GPS Settings Wireless Mobiledata, Inc...

Documents

Transcript of TAIP, Ethernet GPS Settings - · PDF fileTAIP, Ethernet GPS Settings Wireless Mobiledata, Inc...