Tablet Hardness Tester 2013 - electrolabindia.com ELECTROLAB 4 2 Parameter Tablet Tester EBT-2PL...
Transcript of Tablet Hardness Tester 2013 - electrolabindia.com ELECTROLAB 4 2 Parameter Tablet Tester EBT-2PL...
Tablet Testers
Constant Speed and Constant Force
Ÿ Constant speed and constant force measuring principle
Time
Speed
800NForce
Ÿ 7” full color intuitive touch screen display
Touch Screen Display
5Parameters
Tablet Testing
Ÿ WeightŸ ThicknessŸ Diameter / LengthŸ WidthŸ Hardness
ELECTROLAB
2
LAN
Tilt sensing device
Ÿ Tilt sensing device enables display orientation change in verification and calibration mode
EE
EE
Ÿ Programmable calibration and verification modes
Ÿ Calibration and verification reminders
Calibration and Verification
Force
800 N
EHT-5P
TThickness
WWeight
Parameter 5
Ÿ Body made of S.S. to comply with cGMP regulations
Ÿ Perfect companion for IPQC cubicals
CompliancecGMP
Audio-visual alerts
Ÿ Audio-visual alerts for instrument status
Run
Error
Communication
ŸŸŸ
ELECTROLAB
3
Ÿ EnglishŸ GermanŸ FrenchŸ Spanish
Multilingual
HHardness
WdWidth
Tablet Manager Tray
Ÿ Tablet manager tray for easy carrying of tablets from weighing scale
Ÿ Programmable tolerances with visual alerts of T1 , T2 and plausibility limits -
Nominal
T1
T2
Plause
ŸŸŸŸ
Tolerance
Management Security
Ÿ 3 level user management security
Ÿ User selectable templates for printing data and graphs
Printing
Tablet tester withembedded printer
Test Reports
Tablet Tester
ELECTROLAB
4
2 Parameter Tablet Tester
EBT-2PLEBT-2PLR
Compliance
Ÿ Body made of S.S. to comply with cGMP regulations
Ÿ Perfect companion for IPQC cubicals
cGMP
Touch Screen Display
Ÿ 5” full color intuitive touch screen display
Ÿ Constant speed measuring principle Time
Speed
Constant Speed
Ÿ LAN and serial port for printing
Printing
Calibration and Verification
Ÿ Programmable calibration and verification modes
Hardness
HForce
800 N
Thickness
T
withembedded printer
EH-01
Portable Tablet Hardness Tester
Ÿ Tablet hardness measurement by load cell
Ÿ Hardness measuring range upto 500 N
Ÿ Units of measurement in N, kN, Kg, lbs and oz
Ÿ Battery operated (50 hrs of continuous use)
Tablet Hardness Tester with printer connectivity
Ÿ Complies with USP requirements
Ÿ Hardness measurement by load cell upto 500 N
Ÿ Units of measurement in N, Kgf and lbf
Ÿ Printer connectivity through RS 232 port
Ÿ Programmable plausibility upper (T1) and lower (T2) tolerance limits
Ÿ Display and print-out of 10 test values and with statistics
Ÿ Tester operates on rechargeable battery
EH-01P
ELECTROLAB
5
Hardness
HForce
500 N
PrintHardness
HForce
500 N
H
H
ELECTROLAB
6
mm / inch
0.5mm to 3mm in step of 0.1mm
10kg~100kg /sec force in step of 1 kg/sec
N, Kp, Sc, user defined
External balance connectivity Sartorius/Mettler/ Shimadzu/Contech
EHT-5PR
1 to 99 sec
Constant speed or constant force selectable
User selected templates
3 - 800 N
± 1 N
40 mm (up to 65mm optional)
Dual (Big and Small groove)
Optional
3 level user management (flexible role)
2 point calibration3 point verification linearity
User selectable tabular format
Units for hardness
Units for thickness/diameter
Constant speed setting
Constant force setting
Weight
Model
Product code
Parameters
Touch screen display
Samples per test
Adjustable delaybetween the samples
Measuring principles
Printing for data andgraphs selectable
Hardness Range
Accuracy
Jaw opening
Jaw
Tilt sensing device
External thickness
Security
Hardness /thicknesscalibration
Report format
cGMP compliance
Interface
Embedded Printer
LAN, USB and serial
Body can be (SS) stainless steel to comply with cGMP regulations or painted MS
7.0" full colour
Up to 1000
Yes
S.S. : 0940800
MS : 0920800
mm / inch
0.5mm to 3mm in step of 0.1mm
10kg~100kg /sec force in step of 1 kg/sec
N, Kp, Sc, user defined
EHT-5P
1 to 99 sec
Constant speed or constant force selectable
User selected templates
3 - 800 N
± 1 N
40 mm (up to 65mm optional)
Dual (Big and Small groove)
Optional
3 level user management (flexible role)
2 point calibration3 point verification linearity
User selectable tabular format
LAN, USB and serial
Body can be (SS) stainless steel to comply with cGMP regulations or painted MS
7.0" full colour
Up to 1000
Yes
S.S. : 0940800
MS : 0920800
External balance connectivity Sartorius/Mettler/ Shimadzu/Contech
Yes
Weight, Thickness, Diameter / Length,Width, Hardness
Weight, Thickness, Diameter / Length,Width, Hardness
No
1 mm/sec to 3 mm/sec
N, Kp, Sc, user defined
2 point calibration3 point verification linearity
5.7”
Constant speed
± 1N
35 mm
LAN, USB and serial
upto 100
3 - 800 N
Body can be (SS) stainless steelto comply with cGMP regulationsor painted MS
Hardness and Thickness
EBT-2PRL
S.S. : 0940900
MS : 0920900
1 mm/sec to 3 mm/sec
N, Kp, Sc, user defined
2 point calibration3 point verification linearity
5.7”
Constant speed
± 1 N
35 mm
LAN, USB and serial
upto 100
3 - 800 N
Body can be (SS) stainless steelto comply with cGMP regulationsor painted MS
Hardness and Thickness
EBT-2PL
S.S. : 0940900
MS : 0920900
Thermal printerconnectivity
N, Kgf & lbf
±0.5%
30 mm
Upto 500 N
940200
Hardness
EH-01P
±0.5%
30 mm
Upto 500 N
N, kN, Kg, lbs & oz
EH-01
940100
Hardness
NoNoNoNo
Yes No No
24 Column thermal printerPart no - 0901A00007
EBrass weight 5 kg for
validation with certificatePart no - 0901A00001
EHook for validation or calibration
Part no - 0901A00004
E
BrushPart no - 0901A00002
E
• Complete range of Dissolution Testers • • Disintegration Testers • Friability Testers• Electromagnetic Sieve Shakers • Tap Density Tester • Bulk Density Tester • Powder Flow Tester • Leak Tester • Peristaltic Pumps
Dissolution Media Preparator
ELECTROLABSales
&Service
Worldwide
Head Office : 401, Tirupati Udyog, I. B. Patel road, Off. Western Express highway, Goregaon (East), Mumbai - 400 063, India.
Tel : +91 - 22 - 4041 3131 • E-mail : [email protected]
Factory : EL 23/24, T. T. C., Electronic Zone, M. I. D. C, Mahape, Navi Mumbai - 400 710, India.
Tel : +91 - 22 - 4161 3131 • Website : www.electrolabindia.com
The information contained in this document is believed to be correct but ELECTROLAB accepts no liability for any errors and reserves the right to alter specifications without noticeDecember, 2013 / 090C001
Our Products
Optional accessories EH-01 and EH-01PStandard accessories for EH-01 and EH-01P
Care & Maintenance
Ÿ Handle the weights carefully while calibrating & verifying Tablet TestersŸ Bouncing the weight on the calibration platform while placing the weight may lead to permanent damage of
the load cell
CE
ISO 9001ISO 9001 : 2008 CERTIFIED
SCES 047
ISSSW
Optional accessories EHT-5P and EHT-5PRStandard accessories for EHT-5P and EHT-5PR
Optional accessories EBT-2PL and EBT-2PRLStandard accessories for EBT-2PL and EBT-2PRL
Description
Brush
0901A00002
Part no Description
Brush
Acrylic tray
Acrylic hood
Printer roll (for )EBT-2PRL
Part no Description
Printer roll (for )EHT-5PR
Weighing scale
Validation Kit :
Ÿ 5 kg brass weight for calibration and validation of hardness
Ÿ 10 mm calibrated gauge block for validation of thickness
Tablet manager tray
Slide-in groove tongue
Part no Description
65 mm jaw
0901A00002
Part no
0905A00001
0905A00003 0901A00011
0903A00002
0904A00004
0903A000010901A00011
0904A00004
0905A00002
0905A00003
Validation Kit :
Ÿ 5 kg brass weight for calibration and validation of hardness
Ÿ 10 mm calibrated gauge block for validation of thickness