Table-type Horizontal Boring and Milling Machine · 2020. 6. 8. · Table-type Horizontal Boring...
2
Table-type Horizontal Boring and Milling Machine 755 Greenleaf Avenue | Elk Groove Village, IL 60007 | [email protected] 6 000 [236.2] Machine Specifications BTH-110.R18 Travel Table Spindle Feedrate Spindle motor X-axis travel (Cross movement of table) Y-axis travel (Vertical movement of spindle head) Z-axis travel (Longitudinal movement of table) W-axis travel (Spindle extension) Table working surface Table loading capacity Spindle diameter Spindle speed range Rapid traverse rate Feedrate 30 min.rating / cont.rating mm [in] mm [in] mm [in] mm [in] mm [in] mm [in] kg [lbs] mm [in] min-1 mm/min [ipm] deg/min kW [HP] mm/min [ipm] mm/min [ipm] 720 2 500 [100] 1 500 [60] 2 000 [80] 18 000 [708.7] 110 [4.3] 500 [20] 6 to 4 000 1 400x1 800 [55.1x70.8] 10 000 [22 000] 1 to 10 000 [0.04 to 393.7] AC30/22 [AC40/30] X,Y,Z W B Accuracy Positioning Repeatability mm [in] ±0.004 [±0.00016] mm [in] ±0.002 [±0.00008] X,Y,Z X,Y,Z Machine size Height x Width x Depth mm in 4700 x 7000 x 6445 185.0 x 275.6 x 253.7
Transcript of Table-type Horizontal Boring and Milling Machine · 2020. 6. 8. · Table-type Horizontal Boring...
Table-type Horizontal Boring and Milling Machine
755 Greenleaf Avenue | Elk Groove Village, IL 60007 | [email protected]
6 000 [236.2]
Machine Specifications BTH-110.R18Travel
Table
Spindle
Feedrate
Spindle motor
X-axis travel (Cross movement of table)Y-axis travel (Vertical movement of spindle head)Z-axis travel (Longitudinal movement of table)W-axis travel (Spindle extension)Table working surfaceTable loading capacitySpindle diameterSpindle speed rangeRapid traverse rate
Feedrate30 min.rating / cont.rating
mm [in]
mm [in]mm [in]mm [in]
mm [in]mm [in]
kg [lbs]mm [in]min-1
mm/min [ipm]
deg/min
kW [HP]
mm/min [ipm]
mm/min [ipm]720
2 500 [100]
1 500 [60]2 000 [80]
18 000 [708.7]
110 [4.3]
500 [20]
6 to 4 000
1 400x1 800 [55.1x70.8]10 000 [22 000]
1 to 10 000 [0.04 to 393.7]AC30/22 [AC40/30]
X,Y,ZWB
Accuracy PositioningRepeatability
mm [in] ±0.004 [±0.00016]mm [in] ±0.002 [±0.00008]
X,Y,ZX,Y,Z
Machine size Height x Width x Depth mmin
4700 x 7000 x 6445185.0 x 275.6 x 253.7
755 Greenleaf Avenue | Elk Groove Village, IL 60007 | [email protected]://www.shibaura-machine.com/
4700[185.0]6445
[253
.7]
7000[275.6]
Option Accessories
Machine General Views
Angle head Automatic Measuring Automatic Tool Length Measuring
Machine Accessories
TOSNUC 999 Control system Number of Auto Tool Change : 60Auto spindle clamp unit CAT 50Spindle cooling unit Table reference pieceAuto power shut down Table indexing 0.0001deg and locate pin on every 90degHigh power spindle dive motor Safety cover on operator side and ATC sideLong nose spindle head [Extended 7.87in](OP) Manual operation box with current position monitorCTSHEIDENHAIN feed back scale X,Y,Z and B
