TABLE OF CONTENTS

Table of Contents ......................................................................................... 1

Welcome Message ....................................................................................... 2

ISPCE 2014 Symposium Committee .......................................................... 3

PSES Board of Directors ............................................................................. 6

ISPCE 2014 General Information ................................................................ 8

ISPCE 2014 Patrons ................................................................................... 11

ISPCE 2014 Exhibitors ............................................................................... 12

Keynote Speakers ...................................................................................... 22

Symposium Schedule ................................................................................ 26

ISPCE 2015 Announcement ..................................................................... 32

1

WELCOME MESSAGE Hello Everyone, On behalf of the Santa Clara Valley Chapter of the IEEE PSES and indeed the entire PSES, I would like to invite you to the center of where it all began – Silicon Valley – the high tech capital of the world! Yes – this is where the PSES got its start and the first time since then that the Symposium has been back. Not only are we back, but we have made some changes to the Symposium that we hope you will like. Some of the Changes include:

• A new date earlier in the year to make it easier for more to attend. • A modified schedule to have more time with the Exhibitors – Please be sure to

visit all the exhibitors during the general sessions! • Two Keynotes – One on 3D printing and one on Wearable Technologies – talk

about High Tech! • A live demonstration – by a local high school First Robotics Team – you will be

amazed by what these students do in such a short time – a sample for them of how business works in real life!

• A Member Center – stop by and learn more about the society and the IEEE as well as how you can get more involved – and if you are not a member, we will help you sign up!

• Senior Member Promotion Support – check in at the Member Center and we will help get you started with your elevation to Senior Member status.

Additionally, not only is the Silicon Valley the global center of innovation and high tech, but it is also right in the middle of one of California's most vibrant recreation, entertainment, and education centers. We have something for everyone - Just in San Jose alone there is a lot to do and see: View it all here

Of course a couple of favorites for us techies are Computer History Museum The Tech Museum of Innovation And within a short drive there are San Francisco – Theater, Museums, Cable Cars! Santa Cruz – Beach/Boardwalk Monterey – Cannery Row, Monterey Bay Aquarium, World Class Golfing – Pebble Beach, Spyglass Napa – Wine Country Sierra Nevada – Lake Tahoe, Yosemite

We have a great venue at the Double Tree by Hilton San Jose, right next to the San Jose International Airport, major highways, and the local Light Rail system that will allow you to easily get to and from the event and explore the local attractions. We hope you are as excited as we are and we can’t wait to get your feedback during the closing session so we can make the 2015 ISPCE even better! Best Regards, Kevin L. Ravo PE IEEE PSES – President 2014 - 2015 IEEE PSES 2014 Symposium General Chair UL LLC CONSUMER TECHNOLOGY Distinguished Member of Technical Staff

2

ISPCE 2014 SYMPOSIUM COMMITTEE General Chair Kevin Ravo, UL LLC, USA Past General Chair Gary Schrempp, Dell - Regulatory Compliance, USA Secretary Rich Johnson, Hewlett-Packard Company, USA Treasurer Dan Arnold, UL LLC, USA Technical Program Chair Tom Burke, UL LLC, USA Past Technical Program Chair Gary Tornquist, Microsoft, USA Track Chairs Energy Storage/Batteries Track Jan Swart, Exponent Inc., USA Medical, Laboratory & Risk Management Track Frank O'Brien, O'Brien Compliance Management, USA Richard Gardner, GE Healthcare, USA EMC Workshop Henry Benitez, ElectroMagnetic Investigations, LLC, USA Conference Sales Sue Kingston, Conference Catalysts, LLC, USA Conferences Vice President Doug Nix, Compliance InSight Consulting Inc., Canada Marketing Chair Tom Jackson, UL LLC, USA Editorial Board Chair Murlin Marks, IEEE Product Safety Engineering Society, USA Technical Program Committee John Allen, Product Safety Consulting, Inc., USA Luiz Araujo, Swarovski Lighting LTD, USA Henry Benitez, ElectroMagnetic Investigations, LLC, USA Daniece Carpenter, Dell, USA Flore Chiang, UL LLC, Taiwan Ted Eckert, Microsoft, USA Richard Gardner, GE Healthcare, USA Peter Kelleher, Dell, Ireland Murlin Marks, IEEE Product Safety Engineering Society, USA Frank O’Brien, O’Brien Compliance Management, USA Grant Schmidbauer, Nemko, USA Jan Swart, Exponent Inc., USA Paul Robinson, IBM, Australia

3

Room Hosts Monday Morning Henry Benitez, ElectroMagnetic Investigations, LLC, USA Tom Juliano, UL LLC, USA Frank O'Brien, O’Brien Compliance Management, USA Daren Slee, Exponent Inc., USA Monday Afternoon Henry Benitez, ElectroMagnetic Investigations, LLC, USA Tom Juliano, UL LLC, USA Frank O'Brien, O’Brien Compliance Management, USA Daren Slee, Exponent Inc., USA Tuesday Morning John Allen, Product Safety Consulting, Inc., USA Henry Benitez, ElectroMagnetic Investigations, LLC, USA Frank O'Brien, O’Brien Compliance Management, USA Jan Swart, Exponent Inc., USA Tuesday Afternoon John Allen, Product Safety Consulting, Inc., USA Henry Benitez, ElectroMagnetic Investigations, LLC, USA Bansi Patel, USA Jan Swart, Exponent Inc., USA Wednesday Morning Homi Ahmadi, USA Henry Benitez, ElectroMagnetic Investigations, LLC, USA Ted Eckert, Microsoft, USA Bansi Patel, USA Conference Management/Registration Conference Catalysts, LLC

4

PSES BOARD OF DIRECTORS Executive Committee Name President Kevin Ravo President Elect TBD Past-President Elya Joffe Secretary Daniece Carpenter Treasurer Jan Swart Vice President-Communications Dan Roman Vice President – Member Services Thomas Ha Vice President-Technical Activities Ivan Vandewege Vice President - Conferences Doug Nix Directors at Large Term Expires 12/14 Term Expires 12/15 Term Expires 12/16

Paul Wang Mike Nicholls Steli Lozen Juha K Junkkarinen

Bill Bisenius Richard Nute Kevin Ravo Grant Schmidbauer

Silvia Diaz Monnier Stefan Mozar Mark Maynard Jack Burns

Vice President Communications - Dan Roman Committees Chairperson Newsletter Editor Gary Weidner Marketing Committee Anna Klostermann Email List / EMC-PSTC Jim Bacher / Dave Heald PSES IEEE Communities Jim Bacher / Dave Heald / Dan Roman Webmaster / Internet Dan Roman LinkedIn Admin Dan Teninty / Dan Roman Vice President Member Services - Thomas Ha Committees Chairperson

Regions 1-6 coordinator Bansi Patel

Region 7 coordinator OPEN

Region 8 coordinator Steli Loznen

Region 9 coordinator Silvia Diaz Monnier

Region 10 coordinator Paul Wang

Chapters coordinator Doug Kealey

Photographer Richard Georgerian

6

Hewlett-Packard Company is a multinational information technology corporation headquartered in Palo Alto, California, USA. The company was founded in a one-car garage in Palo Alto by Bill Hewlett and Dave Packard in 1939. Since then HP becomes one of the world's largest information technology companies, operating in nearly every country, supplying not just hardware and software, but

also a full range of services to design, implement, and support IT infrastructure.

HP creates new possibilities for technology to have a meaningful impact on people, businesses, governments and society. The world’s largest technology company, HP brings together a portfolio that spans printing, personal computing, software, services and IT infrastructure at the convergence of the cloud and connectivity, creating seamless, secure, context-aware experiences for a connected world.

HP's Imaging and Printing Group is the leading imaging and printing systems provider in the world for printing and scanning devices, employing Inkjet and LaserJet technologies in variety of products, All-in-One multifunction printer/scanner/faxes, Large Format Printers, Digital Press, Photosmart digital cameras and photo printers, a photo sharing and photo products services.

HP's Personal Systems Group one of the leading vendors of personal computers ("PCs") in the world. PSG includes business and consumer PCs and accessories, handheld computing, and digital "connected" entertainment.

HP’s Enterprise Business incorporates HP Technology Services, Enterprise Services, Enterprise Security Services, Software Division, and Enterprise Servers, Storage and Networking Group. The Enterprise Servers, Storage and Networking Group oversee "back end" products like storage and servers.

7

ISPCE 2014 GENERAL INFORMATION

Welcome Reception Welcome to the 11th IEEE Symposium on Product Compliance Engineering. The Symposium Steering Committee invites attendees to join old friends and meet new acquaintances at the ISPCE 2014 Welcome Reception on Monday, May 5: 6:15 PM – 7:45 PM. The Welcome Reception will be held in the exhibit hall and is included with your registration. Exhibit Hours

Morning Lunch Afternoon Evening

Monday 8:00 AM – 10:00 AM

12:00 PM – 1:30 PM

3:30 PM – 4:15 PM

6:15 PM – 7:45 PM Reception

Tuesday 8:00 AM – 8:45 AM

11:30 AM – 12:45 PM

3:45 PM – 6:00 PM

*Exhibits will be closed during technical sessions Registration Hours Monday 7:00 AM – 6:15 PM Tuesday 7:00 AM – 6:00 PM Wednesday 7:00 AM – 12:30 PM Special Meetings Speaker Breakfast: On the day of your presentation, please join us for a special Speaker Breakfast in the San Carlos Room. Breakfast will be available from 7:00 AM – 8:00 AM. Exhibitor Breakfast: On each day of your exhibiting, please join us for a special Exhibitor Breakfast in the San Carlos Room. The time for the breakfast is from 8:15 AM – 9:00 AM.

8

2014 IEEE Product Safety Engineering Society Awards This year we celebrate the founding of our IEEE society, which goes back twenty-five years. For fifteen years, we existed as a Technical Committee of the IEEE Electromagnetic Compatibility Society (EMCS) or as we were called TC-8. It was always a dream to form our own society of product safety and compliance engineers, but it took the efforts of a number of dedicated individuals to build a network of chapters, workshops, a Newsletter and a list server that established the basis for PSES. Pre-History: IEEE EMCS TC-8 TC-8 Chairs: Rich Pescatore Brian Claes Murlin Marks Jack Burns Richard Georgerian Product Safety Newsletter editors who worked long and hard to get the Newsletter out to hundreds on the mailing list before the days of the Internet: John McBain Roger Volgstadt Technically Speaking Column Author and EMC-pstc@ieee.org List Serv coordinator: Rich Nute “Founders” There were a number of people involved, but these were the people who actually led the charge, dealing with IEEE executives and putting together the proposal for what was approved as the IEEE PSES. Jim Bacher Jack Burns Daniece Carpenter Mark Montrose First Decade: 2004-2013 IEEE PSES Presidents: Mark Montrose* Henry Benitez* Jim Bacher* Murlin Marks Elya Joffe (service to be completed in 2015) *awarded in 2013 Secretary: Daniece Carpenter Treasurer: Jan Swart Annual Symposium Chairs: Henry Benitez (2004) Richard Georgerian (2005, 2006, 2007) Gary Schrempp (2008, 2013) Doug Nix (2009) Steve Brody (2010) Bansi Patel (2011) Anna Klostermann (2012)

9

Technical Program Chairs: Rich Nute Gary Tornquist Society and Conference Treasurer: Dan Arnold Official Conference Photographer: Richard Georgerian Organizational Support: For providing support for PSES as EMCS TC-8 IEEE EMCS For Providing Logistical and In-Kind Support Dell, Inc UL For Providing ISPCE Speakers’ Gifts Microsoft Corporation Chapter of the Year: TBA Best Paper, ISPCE 2014: TBA We invite all attendees to become active members of the IEEE PSES and be a part of a proud tradition. Your Awards’ Committee – Murlin Marks, Juha Junkkarinen, and Grant Schmidbauer

10

ISPCE 2014 PATRONS

Super Platinum Patron

Platinum Patron

Gold Patron

Speaker Gift Patron

11

ISPCE 2014 EXHIBITORS

Advanced Test Equipment Rental www.atecorp.com Advanced Test Equipment Rentals (ATEC) supplies complete testing solutions for EMC, Electrical, Power Quality, Environmental and similar testing applications for the Defense, Aerospace, Medical and Telecom industries. Celebrating 32 years in business, ATEC takes pride in serving our customers with invaluable expertise and technical support.

Associated Research http://www.asresearch.com Associated Research, an ISO 90001 registered company, has been the leader in the electrical safety compliance testing industry for over 77 years! Today, Associated Research offers a complete product line of electrical safety compliance testers. Included in their product offering are AC Hipot, DC Hipot, Insulation Resistance, Ground Bond, Functional Run, Line Leakage testers, and Multi-Function Electrical Safety Compliance Analyzers.

Bay Area Compliance Laboratories http://baclcorp.com Bay Area Compliance Laboratories Corporation (BACL) was established since 1996 in Sunnyvale, California (Silicon Valley), a strategic hub to many large high-tech companies and the most advanced incubator center for start-up companies in the world. As a testing, certification, consulting, and regulatory management firm, BACL enjoys its reputation providing superior services in testing and product certification in the areas of Electromagnetic Compatibility (EMC), Product Safety, Radio Frequency (RF), Wireless and Radio communications, Telecommunications, Specific Absorption Rate (SAR), NEBS (Verizon accredited), Dynamic Frequency Selection (DFS), Hearing Aid Compatibility (HAC), California Energy Commission (CEC), Energy Efficient Lighting Products (EELP), ENERGY STAR ® and so on. BACL's testing and certification extends to most international markets. BACL's philosophy is to provide efficient and timely testing and certification services in accordance with the regulations and to the customers’ requirements and satisfaction. For more detailed information, please visit: http://www.baclcorp.com/, or contact us at info@baclcorp.com

CASE Forensics http://www.case4n6.com CASE Forensics has provided consulting engineering services since 1990. Our experience investigating field failures provides an intrinsic knowledge base to assist you with research, development and product safety testing.

12

Compliance West, USA http://www.compwest.com Based in San Diego, California, Compliance West, USA is one of the world’s leading manufacturers of customized hipot and surge testing equipment. The company’s software/firmware capabilities can provide computerized operation and automated test solutions for a wide range of industries; from medical device manufacturers and LED lighting to computer technology and solar energy.

CSA Group http://www.csagroup.org CSA Group is a global solutions provider of product testing and certification services for electrical, mechanical, plumbing, gas, medical and a variety of other products. Recognized in the U.S., Canada and around the world. CSA Group certification marks appear on billions of qualified products worldwide.

D.L.S. http://www.dlsemc.com D.L.S. provides global compliance testing services, including testing certification, and consulting for Product Safety and EMC requirements. D.L.S. can test to UL, CSA, CE, (Low Voltage, Medical Device, and Machinery Directives) CCC, GS, CB and other global safety requirements. Combined with global EMC testing, D.L.S. provides a true one-stop shop for all your global compliance testing needs.

E.D. & D. http://www.productsafet.com ED&D is your One-Stop Shop for Product Safety Test Equipment, offering the world's most extensive inventory available. Everything you need for Product Safety testing, such as Automated Hipot testers, digital leakage current testers, Impact hammers, glow wire testers, IP Code Equipment such as Dust chambers, jet nozzles, Drip Boxes, waterproof turntables, probes, force gauges, and many more items, of which many will be on display. ED&D is ISO 17025 Accredited, with the industry's most complete Scope for specialized test equipment. Product Safety Training courses also available.

Electro Magnetic Test, Inc. www.emtlabs.com EMT Labs (Electro Magnetic Test, Inc), an ISO 17025 NVLAP accredited testing and consulting firm. Our service is providing engineering focus across all areas of Electromagnetic Compatibility, Wireless, Wireline, Telecom, and Safety certifications for a wide range of products for many different environments. EMT is ready to provide your company with the testing, approvals, and homologation certifications desired and required to make your company's product an international success.

13

ESI (Engineering Systems Inc.) http://www.esi-website.com ESI is a preeminent engineering and scientific investigation and analysis firm committed to providing clear answers to the most demanding technical issues faced by our clients. Our comprehensive multidisciplinary expertise and practical experience, combined with our extensive diagnostic, analytical, and physical testing capabilities, create an ideal environment for efficiently solving the challenges our clients bring to us.

G&M Compliance http://www.gmcompliance.com Since 1997, G&M Compliance has proudly provided manufacturers with solution based product regulatory and certification services. We provide Product Safety, EMC, EMI, NEBS, Climatic, Dynamic testing and consulting. We test to UL, CSA, CE, EN, IEC, FCC, Belcore, European, China CCC, S. Korea KC, Russia GOST-R and various International Standards. We specialize in information technology (ITE), network telecommunication, audio & video, medical, laboratory, control, measurement, automotive and machinery equipment.

Go Global Compliance, Inc. http://goglobalcompliance.com Go Global Compliance Inc. is a privately-held company founded in 2010 whose core values include improved time to market, quality enhancement, and cost effective solutions across our clients’ product portfolio. With staff experience spanning 85+ years, our client base consists of the world’s hi-tech Fortune 100 and Fortune 500 companies. Go Global Compliance offers solutions and expertise in compliance engineering, international mandatory approvals and representation for 150+ countries, process control and optimization, factory quality system audits, regulatory policies, specifications and compliance roadmaps. We are redefining the way global compliance/certification services are managed and delivered in the industry by replacing the task-oriented, reactive, client-vendor model with a proactive, integrated partnership that lasts throughout the product life cycle. Go Global Compliance values strong relationships with in-country partner organizations, test laboratories, approval bodies, regulators and professionals helping us to accelerate the certification process and keeping our clientele updated with the ever changing regulations. We have garnered significant experience from projects delivered across the world and understand the data, channels and business environments across technologies and continents to provide the professionalism and experience you demand – on time and wherever you want it.

14

Haefely Hipotronics http://www.hipotronics.com As a leader in the field of EMC, Haefely Hipotronics has a full range of conducted immunity test equipment designed to simulate the effects of interference sources on electronic, electrical and telecommunications products. Most prevalent and included in both IEC and EN product standards are the "classic" EMC tests for electrostatic discharge (ESD), electric fast transient/burst (EFT), lightning surge, magnetic field (MF), and power line quality. Our objective is to provide the best-in- class range of instruments that are flexible enough to be used in CE Marking, product development, type verification, product safety, component and production testing.

HV Technologies http://www.hvtechnologies.com The staff of HV TECHNOLOGIES, Inc., in partnership with EMC Partner AG, Prana Amplifiers, Montena Technology, Gauss Instruments, and TESEO, are focused on providing our clients with the highest quality and competitively priced, full compliance test instruments available. Our staff has been supporting the EMC testing community by designing, producing, and distributing the best in EMC test instruments and systems for over two decades. When using our products, customers experience the most reliable test instruments with the cleanest measurements, and repeatable wave shapes available. This has been possible through innovative product design and the deployment of unique leading-edge technologies. We offer complete EMC equipment solutions from immunity to emissions, both conducted and radiated. Come see all we have to offer!

IEEE Consumer Electronics Society http://cesoc.ieee.org The Consumer Electronics Society (CE Society) is an organization within the IEEE that strives for the advancement of the theory and practice of Electronic Engineering and of the allied arts and sciences with respect to the field of Consumer Electronics and the maintenance of a high professional standing among its members, which now number over 5000. The society has long been the premier technical association in the Consumer Electronics Industry. The Consumer Electronics Society is truly international; its publications and presentations are authored by researchers from countries throughout the world. Activities of the CE Society are directed by the society's administrative committee (AdCom), whose members represent the technical and commercial breadth of the organization.

15

In Compliance Magazine http://incompliancemag.com In Compliance Magazine features in-depth coverage of worldwide regulatory compliance issues for the electronics industry. Each month you'll find technical articles from industry leading authors on topics related to test and design, standards updates and changes, products, services, and more! Available in print or digitally, we offer a variety of informational resources for the electrical engineering professional. Visit our website, activate your free subscription, and join one of our many eNewsletters for regular updates.

Interpower http://www.interpower.com The InterpowerTM International Power Source is an AC power source used to verify your product design and for product testing. The unit can be used on a bench top, or is rack mountable. Interpower has four models available which have an input of 100-240VAC/50-60Hz. For each output option we offer a model with a RS232 and USB port, and a model with no communication ports. Interface software available for automated remote control operation. Rental Units also available.

Intertek http://www.intertek.com Intertek is a global leader in testing, inspection and certification services, which operates in over 1000 laboratories and offices in 100 countries throughout the world. Intertek provides Global Market Access through its local services, including EMC testing, energy efficiency and ENERGY STAR testing, environmental testing, calibration, product safety testing, certification and performance testing for clients in such industries as appliances, military, HVAC, components, industrial, medical, telecommunications, lighting, automotive, semiconductor, retail, building products, telecom, wireless, electronics, and cabling products. For more information, visit www.intertek.com/electronics

16

MET Laboratories, INC http://www.metlabs.com As the U.S.’s first OSHA-licensed Nationally Recognized Testing Laboratory, MET Laboratories is an internationally-recognized resource for regulatory certification of electrical products for the worldwide marketplace. Testing covers a wide range of regulatory, commercial and military standards. MET provides testing services required for specific certifications needed to establish product safety, electro-magnetic compatibility, environmental hardiness, telecom, metering, fiber optic, wireless and RFID compliance. MET Laboratories is headquartered in Baltimore, Maryland, with office locations in Union City and Santa Clara, California, Cary, North Carolina, Austin, TX and wholly-owned international locations in China, Taiwan, Korea and Italy. Learn more about MET at www.metlabs.com

Mobile Power Solutions http://www.mobilepowersolutions.com Mobile Power Solutions specializes in guiding your company through today's increasingly complex battery-related safety regulations. MPS provides comprehensive regulatory compliance, safety, and performance testing; we are A2LA accredited to ISO/IEC 17025:2005, a CBTL and participate in UL's Data Acceptance Program. Testing services include IEC 62133, UN 38.3, UL 2054, UL 1642, RTCA D0-227 and D0-311 Testing. Custom safety tests include: Fire Exposure, Nail Penetration, Failure Propagation, Failure Analysis and a host of other custom safety and performance tests. We can help with Vendor Selection & Auditing, Design Reviews and Validation Testing.

17

National Technical Systems http://www.nts.com We are a diversified engineering services company, providing a wide range of product design consulting services, testing and certifications, and supply chain management solutions. Our clients see us as an extension of their own engineering teams, filling in their internal gaps and providing the expertise required to build better, stronger, safer, more reliable products and bring those products to market quickly and efficiently. With the largest network of test laboratories and engineering service centers in North America and over 50 years of experience to draw from, NTS is prepared to meet any challenge. Because helping you achieve your goals is how we achieve ours!

Nemko http://www.nemko.com Nemko is your complete source for compliance testing, certification, and worldwide market approvals. With 20 locations globally and an experienced international staff, Nemko is strategically positioned to provide on time certifications and approval support. We feature: Accredited EMC/RF/Wireless and Electrical Safety testing under one roof. Experienced Engineers providing "precompliance" evaluations to reduce your time at market. Easy market access, one local point of contact for all major market certifications using our Nemko Direct network. CB Scheme International Certifications for more than 40 countries; Nemko Direct for Telecom products for more than 150 countries, and Nemko's North American NRTL/C certification.

OnRule http://www.onrule.com OnRule empowers organizations to increase control and visibility over their product regulatory compliance. Big and small companies use OnRule to monitor the status of their product portfolio certifications across the world, and to share information with their engineering, sales and external teams; ultimately mitigating the risk of non-compliance.

18

Orbis Compliance http://www.orbiscompliance.com Orbis Compliance specializes in Product Regulatory Compliance for Latin America, Central America and the Caribbean for the Wireless and Telecom Industry. Product Safety, EMC, and Telecom Certifications are our areas of concentration. Orbis Compliance’s infrastructure and operating procedures are designed to support its mission: To dramatically accelerate manufacturers’ time to market revenue in Latin America by expediting the regulatory process for their products. We achieve this mission by working 100% directly with in-country Regulators, by having dedicated engineering expertise supporting in-country testing labs in major markets such as Brazil, Mexico and Argentina, and by having complete control over the project from beginning to end, managed by certified project managers. Orbis Compliance’s industry connections, knowledge of the Latin Market, language and culture allows us to complement our dedication to our clientele by supporting and providing them with the network of connections necessary to have a successful market entry in Latin America. ORBIS COMPLIANCE - Simple and Fast Certifications for Latin America. For more information, please visit www.orbiscompliance.com.

Rohde & Schwarz http://www.rohde-schwarz.com Rohde & Schwarz is the world’s leading manufacturer of EMC test and measurement equipment. For 80 years, Rohde & Schwarz has stood for quality, precision and innovation in all fields of wireless communications. The company is based on four pillars: test and measurement, broadcasting, secure communications, radiomonitoring and radiolocation. As a result, the company can address diverse market segments including wireless communications, the broadcasting and electronics industry, aerospace and defense, homeland security and critical infrastructures.

SIEMIC http://siemic.com SIEMIC is your one-source solution for world market access, as a leading provider for compliance testing, product certification, and international approval services. Their US headquarters is located in Milpitas, California, with additional global locations in Asia. In the last eleven years SIEMIC has built a solid reputation for offering high-quality and cost-effective turnkey solutions. Featuring a top-flight staff with expertise in EMC, Wireless, SAR, DFS, Telecom, Safety, and Energy Star, our state of the art engineering test labs, compliance consulting services, and local technical support and guidance will result in short lead times and fast turnaround on your next product.

19

TESEQ http://www.teseq.com Teseq joins AMETEK as part of its Electronic Instruments Group. It is now a unit of AMETEK Compliance Test Solutions. Teseq offers the world’s most comprehensive range of EMC systems for immunity and emissions testing. We take great pride in our world-class research and development program, backed by state-of-the-art global manufacturing.

TÜV Rheinland http://www.tuv.com TÜV Rheinland® is a leading provider of international testing & certification services. Our professionals have expertise in product assessment as well as EMC, electrical, and telecommunications safety testing. Our 10, 5, and 3 meter anechoic and semi-anechoic EMC labs can accommodate both large and small products. We also offer CE Marking to ensure market access and acceptance in the European Union. Our expert services help companies to obtain a competitive advantage and sell their products in markets across the globe. For more information, visit our website: http://www.us.tuv.com.

TÜV SÜD America http://www.tuv-sud-america.com TÜV SÜD America, a subsidiary of TÜV SÜD AG, is a business-to-business engineering services firm providing international safety testing and certification services. With over 700 experts in North America, TÜV SÜD provides NRTL and SCC Certification, CB Scheme Certification, Field Evaluations, SEMI Evaluations and other Industrial Machinery Services. Additional services include Medical services as an EU Notified Body, CE Marking assistance, International Compliance, EMC/Environmental Testing, and Quality Management System Certification. TÜV SÜD also provides Electromagnetic Compatibility (EMC), Electrical & Mechanical Safety, Wireless Testing, ENERGY STAR® Testing, Lighting and Photovoltaic services, and many additional global conformity assessment services that help companies gain product compliance to enter individual country markets. For more information, visit www.TUVamerica.com.

20

UL http://www.ul.com UL is a premier global independent safety science company that has championed progress for 120 years. Its more than 10,000 professionals are guided by the UL mission to promote safe working and living environments for all people. UL uses research and standards to continually advance and meet ever-evolving safety needs. We partner with businesses, manufacturers, trade associations and international regulatory authorities to bring solutions to a more complex global supply chain. For more information about our certification, testing, inspection, advisory and education services, visit http://www.UL.com.

21

KEYNOTE SPEAKERS

Keynote #1, Monday, May 5, 8:45 AM

Jonathan L. Cobb

3D Printing, The Next Industrial Revolution?

Abstract: Even though 3D Printing has been around for over 20 years it is now hailed by some as having the power to fuel the next industrial revolution. Stratasys was one of the first to enter the 3D Printing space. Stratasys offers over 30 3D Printing solutions with material printing capabilities ranging from PLA to Ultem materials. Stratasys systems have been helping companies design better, safer and more reliable products for 25 years. Initially 3D Printing was primarily used by aerospace and automotive companies to assist in prototyping ideas. Today, the majority of 3D Printers are still used for prototyping, during the past 3 to 5 years there has been increased interest in 3D Printing for end use parts. The Stratasys customer base is broad, serving many industries. Consumer products, automotive, medical and aerospace are the largest commercial uses. Education, from grade school to post graduate education has accounted for over 20% of Stratasys sales for the past 10 years. The presentation will feature a variety of case studies highlighting education, product development, prototyping and its use in gaining regulatory approval and using 3D Printing to produce end use parts. Stratasys has used 3D Printing numerous times to win agency approval, Peppermint Energy used 3D printing to quickly move from concept to product sales, STARBASE and its Mission To Mars program is attracting young people to math and science education. Finally, meet Emma and learn how 3D Printing is changing people’s lives today. Biography: Jon Cobb has served as Vice President, Global Marketing at Stratasys from 2010 to 2012 and currently serves as Executive Vice President, Global Marketing of Stratasys Ltd. Stratasys (SSYS) is a publicly traded, multi-national company with revenues in excess of $500 million. Cobb has also held the position of Vice President and General Manager for the Dimension 3D printing business unit of Stratasys, since January of 2002. Cobb joined the company as Vice President of Marketing in August of 1995. Before joining the company, he served as Vice President of Sales and Marketing for Westec Security, Inc., and he has held various management-level sales and marketing positions with Lockheed Martin’s Calcomp Division. Cobb has a B.S. from the University of Wisconsin, Madison. http://www.stratasys.com/

22

Keynote #2, Tuesday, May 6, 4:00 PM

Christian Stammel

Wearable Devices - Requirements and Challenges Abstract: Being a pioneer and evangelist for the wearable technologies market Christian will look into challenges and opportunities for this field of technology. Having led countless discussions on the topic in the past he will be sharing his view on wearable devices currently on the market and point out potential problem areas. Technologies worn close and constantly on the body have special requirements and some are not easy to overcome. Join Christian for this deep dive behind the scenes of the hyped wearable tech topic. Biography: As founder and CEO Christian Stammel has more than 20 years’ experience in marketing and sales as well as an excellent international network. Using this expertise he supported numerous international companies of all sizes regarding business development, technology marketing, and increase of sales activities with his innovation and marketing company Navispace AG. The natural next step to Navispace’s huge success “Wearable Technology” was the incorporation of the Wearable Technologies AG in 2011. Since then, WT served as a business accelerator for more than 3000 renowned companies and will remain the key hub for marketing new technologies in this field in the years to come. http://www.wearable-technologies.com/

23

Demonstration #1, Tuesday, May 6, 5:30 PM

Monta Vista Robotics Team

FIRST Robotics Demonstration The Monta Vista Robotics Team (MVRT) will be holding a demonstration at the Symposium highlighting Robotics at the High School level. The Monta Vista Robotics Team (MVRT) is a high school robotics team in Cupertino, CA competing in the FIRST (For Inspiration and Recognition of Science and Technology) Robotics Competition. FIRST announces a new game every year in January and challenges teams to build a robot to play for the game. Through six intense weeks, MVRT members work with engineers and advisors to brainstorm, design, prototype, fabricate, assemble, wire and program a 120 pound robot. After the six-week build period, the robot is immediately shipped off to compete at regional and championship competitions. http://www.mvrt.com/

24

YOUR HIGH TECH cOmpliance

rEsourCE

UL and the UL logo are trademarks of UL LLC © 2014 BDi 40302

Explore the advantages of UL’s services, visit: ul.com/hitech

EnvIronmEnTal SUStainabiLity

Global MarkEt accESS

safETy

PErformanCE

TraInInG & EdUcation

WIrElEss/EmC

PRO

GR

AM S

CH

EDU

LE -

Mon

day,

May

5, 2

014

Mon

day,

May

5

San

Jose

Sa

nta

Clar

a M

onte

rey

Car

mel

7:

00 A

M -

6:15

PM

Re

gist

ratio

n - B

aysh

ore

Foye

r 7:

00 A

M -

8:00

AM

Sp

eake

r Bre

akfa

st –

San

Car

los

8:15

AM

- 9:

00 A

M

Exhi

bito

r Bre

akfa

st -

San

Carlo

s

8:00

AM

-9:3

0 AM

O

peni

ng P

lena

ry -

Keyn

ote

#1 -

3D P

rintin

g, T

he N

ext I

ndus

trial

Rev

olut

ion?

- D

onne

r/Sis

kiyo

u/C

asca

de

9:30

AM

- 10

:00

AM

Brea

k &

Exhi

bits

- Do

nner

/Sis

kiyo

u/Ca

scad

e

10:0

0 AM

- 11

:00

AM

Bre

akin

g th

roug

h th

e B

RIC

s, P

art 2

Mar

k M

ayna

rd &

Les

lie B

ai

Ope

rato

r pro

tect

ion

for

med

ical

equ

ipm

ent?

Ris

k fa

ctor

s fo

r ope

rato

r or

patie

nt p

rote

ctio

n

Fran

k O

’Brie

n

App

lyin

g to

y te

sts

to

cons

umer

pro

duct

s

Ted

Ecke

rt EM

C re

gula

tions

John

Hirv

ela

& H

enry

Ben

itez

11:0

0 AM

- 12

:00

PM

Glo

bal p

rodu

ct

cert

ifica

tion

- how

str

ong

is y

our p

rodu

ct li

fe c

ycle

Pr

oces

s?

D

enni

s B

artle

t & P

eter

M

ergu

eria

n

Inno

vativ

e ap

proa

ch to

pr

oduc

t rea

lizat

ion

R

oger

Mar

tin

An

impl

emen

tatio

n of

toy

safe

ty a

sses

smen

t mod

el

S

hu L

un M

ak

12:0

0 PM

- 1:

30 P

M

Lunc

h &

Exhi

bits

- Do

nner

/Sis

kiyo

u/Ca

scad

e

1:30

PM

- 2:

30 P

M

Elec

tric

al p

rodu

ct fa

ilure

s an

d re

gula

tory

co

mpl

ianc

e - A

n en

gine

erin

g an

d le

gal

pers

pect

ive

K

enne

th R

oss

& Jo

hn L

oud

Patie

nt a

nd o

pera

tor -

di

ffere

nt re

quire

men

ts

G

rant

Sch

mid

baue

r

Arc

-Fla

sh e

xplo

sion

: Wha

t's

the

real

risk

?

Jona

than

Ham

ilton

KIS

S EM

C

Ji

m B

ache

r

26

Monday C

ont. San Jose

Santa Clara M

onterey C

armel

2:30 PM - 3:30 PM

Electrical product failures and regulatory com

pliance - A

n engineering and legal perspective (cont.)

Observe users; im

prove device safety

Safe product design, forensic engineering, and A

simov's law

s of robotics K

ISS EMC

Jim B

acher

Kenneth R

oss & John Loud Frank O

'Brien

Louis Bilancia

3:30 PM - 4:15 PM

Break & Exhibits - Donner/Siskiyou/Cascade

4:15 PM - 5:15 PM

Regulatory approval B

razil - U

pdates and trends &

best practices - a perspective straight from

in-country labs

E

lizabeth Perrier

Converting a legacy

medical device to a w

ireless device

Nicholas A

bbondante

What does your touch current look like?

P

eter Perkins

EMC

fundamentals

M

ark Montrose

5:15 PM - 6:15 PM

Doing business in

overseas markets:

opportunities and resources for U

.S. com

panies

Aileen C

rowe N

andi

Docum

enting risk m

anagement In IEC

EE CB

schem

e test report

Paul E

vers

Injury from therm

al energy

Richard N

ute

6:15 PM - 7:45 PM

Exhibitor Reception - Donner/Siskiyou/Cascade

7:45 PM - 9:00 PM

Chapters M

eeting – San Juan

27

PRO

GR

AM S

CH

EDU

LE -

Tues

day,

May

6, 2

014

Tues

day,

May

6

San

Jose

Sa

nta

Clar

a M

onte

rey

Car

mel

7:

00 A

M -

6:00

PM

Re

gist

ratio

n - B

aysh

ore

Foye

r

7:00

AM

- 8:

00 A

M

Spea

ker B

reak

fast

- Sa

n C

arlo

s

8:00

AM

- 8:

45 A

M

Cont

inen

tal B

reak

fast

& E

xhib

its -

Don

ner/S

iski

you/

Casc

ade

8:45

AM

- 9:

45 A

M

Reg

ulat

ory

labe

ling

G

ary

Sch

rem

pp

Why

500

VA fo

r Hip

ot

test

ers?

A T

C66

in

vest

igat

ion

to e

xplo

re

the

nece

ssity

of 5

00VA

H

ipot

test

ers

N

icho

las

Piot

row

ski

Test

met

hod

to s

imul

ate

inte

rnal

sho

rt-c

ircui

t in

lithi

um-io

n ce

lls

A

lvin

Wu

Intr

oduc

tion

to p

rinte

d ci

rcui

t boa

rd d

esig

n fo

r EM

C c

ompl

ianc

e

Mar

k M

ontro

se

9:45

AM

- 10

:45

AM

Bec

omin

g a

thou

ght

lead

er

M

elin

da M

arks

Haz

ard

base

d sa

fety

en

gine

erin

g in

rela

tion

to

inju

ry e

pide

mio

logy

and

et

iolo

gy

Th

omas

Lan

zise

ro

Rec

harg

eabl

e ba

ttery

co

nditi

on m

onito

ring

usin

g vi

brat

iona

l pro

pert

ies

Ju

ha B

ackm

an &

Ant

ti Jä

rvin

en

10:4

5 AM

- 11

:30

AM

Coffe

e &

Awar

ds C

erem

ony

- Don

ner/S

iski

you/

Casc

ade

11:3

0 AM

- 12

:45

PM

Lunc

h &

Exhi

bits

- Do

nner

/Sis

kiyo

u/Ca

scad

e

28

Tu

esd

ay C

on

t. S

an

Jo

se

San

ta C

lara

M

on

tere

y

Carm

el

12:4

5 P

M - 1

:45 P

M

Sta

te o

f wire

less p

ow

er

tran

sfe

r - Sta

nd

ard

s,

certific

atio

n, c

on

so

rtia, e

tc.

A

nsw

er S

ung

Resid

en

tial s

ola

r an

d

ele

ctric

veh

icle

bo

nd

ing

an

d g

rou

nd

ing

meth

od

s

for g

alv

an

ic c

om

pa

tibility

Dheena M

oongila

n

Certific

atio

n c

ha

ng

es fo

r b

atte

ries in

ele

ctric

al

devic

es

Ric

h B

ycze

k

His

toric

al m

eth

od

s o

f te

stin

g E

MI g

askets

Georg

e K

unkel

1:4

5 P

M - 2

:45 P

M

Glo

ba

l su

bs

tan

ce

reg

ula

tion

s im

pa

ctin

g th

e

ele

ctric

al in

du

stry

Joe L

angto

n

Eq

uip

ote

ntia

lity a

nd

g

rou

nd

ing

deriv

atio

n o

f g

rou

nd

ing

resis

tan

ce fo

r eq

uip

men

t

Ric

hard

Nute

Overv

iew

of IE

C s

afe

ty

req

uire

men

ts fo

r mic

ro fu

el

cells

Harry

Jones

Su

sp

ect C

ou

nte

rfeit

Ele

ctro

nic

Co

mp

on

en

ts &

E

SD

Packag

ing

Mate

rials

can

Le

ad

to In

jury

an

d

Lo

ng

-Te

rm S

tora

ge Is

su

es

wh

ile p

osin

g is

su

es in

H

an

dlin

g, In

sp

ectio

n a

nd

M

an

ufa

ctu

ring

!

Robert J

. Verm

illion

2:4

5 P

M - 3

:45 P

M

RA

PE

X-S

yste

m a

nd

in

terv

en

tion

of E

uro

pe

an

m

ark

et s

urv

eilla

nc

e

au

tho

rities - B

urd

en

or

relie

f?

T

hom

as K

lindt &

Susanne

Wende

Req

uire

men

ts fo

r mo

du

lar

da

ta c

en

ters

Anh N

guyen &

Randy Iv

ans

La

ten

t de

fect

ch

ara

cte

rizatio

n u

sin

g

lithiu

m io

n c

ells

Jan S

wart

3:4

5 P

M - 4

:00 P

M

Co

ffee B

reak &

Exh

ibits

- Do

nn

er/S

iskiy

ou

/Cascad

e

4:0

0 P

M - 5

:00 P

M

Ke

yn

ote

#2 - W

eara

ble

Devic

es - R

eq

uire

men

ts a

nd

Ch

alle

ng

es; E

xh

ibits

- Do

nn

er/S

iskiy

ou

/Casc

ad

e

5:3

0 P

M - 6

:15 P

M

FIR

ST

Dem

on

stra

tion

& E

xh

ibits

- Do

nn

er/S

iskiy

ou

/Cascad

e

6:1

5 P

M - 9

:00 P

M

Tech

nic

al C

om

mitte

e M

eetin

gs

– S

an

Ju

an

29

PRO

GR

AM S

CH

EDU

LE -

Wed

nesd

ay, M

ay 7

W

edne

sday

, May

7

San

Jose

Sa

nta

Clar

a M

onte

rey

Car

mel

7:

00 A

M -

12:3

0 PM

Re

gist

ratio

n - B

aysh

ore

Foye

r

7:00

AM

- 8:

00 A

M

Spea

ker B

reak

fast

- Sa

n C

arlo

s

8:00

AM

- 9:

00 A

M

AN

EC th

e Eu

rope

an

cons

umer

voi

ce in

st

anda

rdiz

atio

n

Hel

mut

Hin

tz

Ener

gy e

ffici

ency

test

ing

U

we

Mey

er

Are

am

ps a

nd v

olts

cre

ated

eq

ual?

Gar

y To

rnqu

ist

Eval

uatin

g in

terf

eren

ce

issu

es w

ith w

irele

ss

netw

orks

Ken

neth

Wya

tt

9:00

AM

- 10

:00

AM

Prod

uct D

NA

: Mat

eria

ls

trac

eabi

lity,

saf

ety,

and

co

llabo

rativ

e su

stai

nabi

lity

R

akes

h V

azira

ni

Com

paris

on b

etw

een

fire

encl

osur

e re

quire

men

ts in

IE

C 6

0950

-1 a

nd IE

C

6236

8-1

Ji

m K

ao

Ligh

tnin

g su

rge

dam

age

to

Ethe

rnet

and

PO

TS p

orts

co

nnec

ted

to in

side

wiri

ng

Jo

seph

Ran

dolp

h

How

I us

e so

cial

med

ia &

th

e In

tern

et fo

r ne

twor

king

, bra

ndin

g, &

pr

ovid

ing

cust

omer

val

ue

low

cos

t rad

iate

d im

mun

ity p

re-c

ompl

ianc

e te

stin

g

Ken

neth

Wya

tt

10:0

0 AM

- 11

:00

AM

Safe

ty d

esig

n is

sues

for

cons

umer

ele

ctro

nics

po

wer

sup

plie

s

Ste

fan

Moz

ar

IEC

623

68-1

: Lat

est n

ews

on th

e st

anda

rd a

nd it

s ad

optio

n

Jerry

Dik

un &

Tho

mas

Bur

ke

Qua

ntita

tive

sold

er

insp

ectio

n w

ith c

ompu

ted

tom

ogra

phy

R

ay H

uang

, Ada

m S

orin

i &

John

McN

ulty

Ken

's to

p te

n EM

C d

esig

n is

sues

Ken

neth

Wya

tt

11:0

0 AM

- 12

:30

PM

Clos

ing

Sess

ion

– Do

nner

/Sis

kiyo

u/Ca

scad

e

30

Hotel floor plan

31

ISPCE 2015 ANNOUNCEMENT Join us next year for the 2015 IEEE Symposium on Product Compliance Engineering! ISPCE 2015 will be held in Chicago, Illinois, on May 18-20. The IEEE Product Safety Engineering Society seeks original and unpublished papers, presentations, workshops, and tutorials on all aspects of product safety and compliance engineering including, but not limited to:

• EMC Compliance • Energy Storage • Forensics • Hazard-based Safety Engineering & Safety Science • Innovation • Leadership • Medical Devices • Risk Analysis, Assessment & Management • Anti-counterfeiting • Certification & Compliance • Components • Demonstrations • Environmental • Functional & Software Safety • Hazard-specific topics • Photobiological safety & compliance • Product Liability & Recalls • Research

The preliminary authors' schedule is as follows. Indicated deadlines require that the associated documents be loaded into EDAS by the due date:

• Review Manuscript/Presentation Submission: December 15, 2014 • Acceptance Notification: February 1, 2015 • Final Camera-ready Paper/Presentation Submission: April 1, 2015

We hope to see you there! Find out more information at: www.psessymposium.org. Organizers General Chair John Allen Jrallen@productsafetyinc.com Technical Program Chair Tom Burke thomas.m.burke@ieee.org Technical Program Co-Chair Dwayne Davis dwayned@asresearch.com

32