PART I SPECIFICATIONS

Table of Contents

SUBJECT SEQUENCE

Number Title Page Volume

AGGREGATES

M6-08 Fine Aggregate for Hydraulic Cement Concrete M 6-1 1A

M 17-07 Mineral Filler for Bituminous Paving Mixtures M 17-1 1A

M 29-03 (2007) Fine Aggregate for Bituminous Paving Mixtures M 29-1 1A

M43-05 Sizes of Aggregate for Road and Bridge Construction M 43-1 1A

M 45-06 Aggregate for Masonry Mortar M 45-1 1A

M 80-08 Coarse Aggregate for Hydraulic Cement Concrete............. M 80-1 1A

M 195-06 Lightweight Aggregates for Structural Concrete M 195-1 1A

BITUMINOUS MATERIALS

M 20-70 (2004) Penetration-Graded Asphalt Cement M 20-1 1A

M 81-92 (2004) Cutback Asphalt (Rapid-Curing Type) M 81-1 1A

M 82-75 (2004) Cutback Asphalt (Medium-Curing Type) M 82-1 1A

M 140-08 Emulsified Asphalt M 140-1 1A

M 156-97 (2005) Requirements for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures M 156-1 1A

M 208-01 (2005) Cationic Emulsified Asphalt M 208-1 1A

M 226-80 (2004) Viscosity-Graded Asphalt Cement M 226-1 1A

M 303-89 (2006) Lime for Asphalt Mixtures M 303-1 1B

M 316-99 (2007) Polymer-Modified Cationic Emulsified Asphalt M 316-1 1B

M 320-05 Performance-Graded Asphalt Binder M 320-1 1B

M 323-07 Superpave Volumetric Mix Design M 323-1 1B

M 325-08 Stone Matrix Asphalt (SMA) M 325-1 1B

R 5-08 Selection and Use of Emulsified Asphalts R 5-1 1B

R 14-88 (2007) Classifying Hot Mix Recycling Agents R 14-1 1B

R 15-00 (2004) Asphalt Additives and Modifiers R 15-1 1B

R 26-01 (2005) Certifying Suppliers of Performance-Graded Asphalt Binders R 26-1 1B

R 28-06 Acclerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) : R 28-1 1B

R 29-08 Grading or Verifying the Performance Grade (PG) of an Asphalt Binder R 29-1 1B

R 30-02 (2006) Mixture Conditioning of Hot Mix Asphalt R 30-1 1B

R 35-04 Superpave Volumetric Design for Hot Mix Asphalt R 35-1 1B

R 46-08 Designing Stone Matrix Asphalt (SMA) R 46-1 1B

R 47-08 Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size R 47-1 1B

•

Xl

",sa

Number Title BOX CULVERT, CULVERT PIPE, AND DRAIN TILE

M 36-03 (2007) Corrugated Steel Pipe, Metallic-Coated, for Sewers and Drains

M 86M/M 86-07 Nonreinforced Concrete Sewer, Stonn Drain, and Culvert Pipe

M 167M! Corrugated Steel Structural Plate, Zinc-Coated, M 167-05 for Field-Bolted Pipe, Pipe-Arches, and Arches

M 170-08 Reinforced Concrete Culvert, Stonn Drain, and Sewer Pipe

M 170M-08 Reinforced Concrete Culvert, Stonn Drain, and Sewer Pipe [Metric]

M 175M! M 175-05

Perforated Concrete Pipe

M 176M/ M 176-07

Porous Concrete Pipe :

M 178M! M 178-07

Concrete Drain Tile

M 190-04 Bituminous-Coated Corrugated Metal Culvert Pipe and Pipe-Arches

M 196-92 (2004) Corrugated Aluminum Pipe for Sewers and Drains

M 197-06 Aluminum Alloy Sheet for Corrugated Aluminum Pipe

M 198-08 Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Prefonned Flexible Joint Sealants

M 199M/ Precast Reinforced Concrete Manhole Sections M 199-08

M206M! Reinforced Concrete Arch Culvert, Stonn Drain, M206-08 and Sewer Pipe....

M207M! Reinforced Concrete Elliptical Culvert, Stonn Drain, M207-08 and Sewer Pipe

M 218-03 (2007) Steel Sheet, Zinc-Coated (Galvanized), for Corrugated Steel Pipe

M 219-92 (2004) Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

M242M! Reinforced Concrete D-Load Culvert, Stonn Drain, M 242-08 and Sewer Pipe

M 243-96 (2004) Field-Applied Coating of Corrugated Metal Structural Plate for Pipe, Pipe-Arches, and Arches

M 245-00 (2004) Corrugated Steel Pipe, Po1ymer-Precoated, for Sewers and Drains

M 246-05 Steel Sheet, Metallic-Coated and Polymer-Precoated, for Corrugated Steel Pipe

M 252-08 Corrugated Polyethylene Drainage Pipe

M 259-98 (2006) Precast Reinforced Concrete Box Sections for Culverts, Stonn Drains, and Sewers

•

xii

Page

M 36-1

M 86M/ M 86-1

M 167M! M 167-1

M 170-1

M 170M-1

M 175M/ M 175-1

M 176M/ M 176-1

M 178M/ M 178-1

' M 190-1

M 196-1

M 197-1

M 198-1

M 199M/ M 199-1

M 206M! M 206-1

M 207M/ M 207-1

M 218-1

M 219-1

M 242M/ M 242-1

M 243-1

M 245-1

M 246-1

M 252-1

M 259-1

Volume

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

Number Title Page Volume

M 259M-00 (2004) Precast Reinforced Concrete Box Sections for Culverts, Stonn Drains, and Sewers [Metric] M 259M-I IA

M 262-07 Concrete Pipe and Related Products M 262-1 IB

M 264-03 (2007) Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping M 264-1 IB

M 273-00 (2004) Precast Reinforced Concrete Box Sections for Culverts, Stonn Drains, and Sewers with Less Than Two Feet of Cover Subjected to Highway Loadings M 273-1 IB

M 273M-00 (2004) Precast Reinforced Concrete Box Sections for Culverts, Stonn Drains, and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings [Metric] M 273M-I 18

M 274-87 (2004) Steel Sheet, Aluminum-Coated (Type 2), for Corrugated Steel Pipe M 274-1 18

M 278-02 (2007) Class PS46 Poly(Vinyl Chloride) (PVC) Pipe M 278-1 18

M 289-91 (2004) Aluminum-Zinc Alloy Coated Sheet Steel for Corrugated Steel Pipe , M 289-1 18

M294-08 Corrugated Polyethylene Pipe, 300- to 1500-mm Diameter M 294-1 IB

M 304-03 (2007) Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter M 304-1 IB

M 306-07 Drainage, Sewer, Utility, and Related Castings M 306-1 IB

M 315-07 Joints for Concrete Pipe and Manholes, Using Rubber Gaskets M 315-1 IB

M 315M-07 Joints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets [Metric] M 315M-I IB

M 326-08 Polyethylene (PE) Liner Pipe, 300- to 1600-mm Diameter, Based on Controlled Outside Diameter M 326-1 IB

BRICK

M 91-07 Sewer and Manhole Brick (Made from Clay or Shale) M 91-1 IA

M 114-07 Building Brick (Solid Masonry Units Made from Clay or Shale) M 114-1 IA

CONCRETE, CURING MATERIALS, AND ADMIXTURES

M 148-05 Liquid Membrane-Fonning Compounds for Curing Concrete , M 148-1 IA

M 154-06 Air-Entraining Admixtures for Concrete M 154-1 IA

M 157-06 Ready-Mixed Concrete M 157-1 IA

M 171-05 Sheet Materials for Curing Concrete M 171-1 IA

M 182-05 Burlap Cloth Made from Jute or K~naf and Cotton Mats M 182-1 IA

M 194M/ Chemical Admixtures for Concrete M 194M! IA M 194-06 M 194-1

M 205M/ Molds for Fonning Concrete Test Cylinders Vertically M 205M! IA M 205-08 M 205-1

M 210-06 Use of Apparatus for the Detennination of Length Change of Hardened Cement Paste, Mortar, and Concrete M 210-1 IA

M 224-91 (2004) •

Use of Protective Sealers for Portland Cement Concrete M 224-1 IA

xiii

-

TitleNumber Page Volume

Boiled Linseed Oil Mixture for Treatment of PortlandM 233-86 (2004) Cement Concrete... M 233-1 lA

Concrete Made by Volumetric Batching and Continuous Mixing M241M/ M 241M/ lA M 241-06 M 241-1

Coal Fly Ash and Raw or Calcined Natural Pozzolan M 295-07 for Use in Concrete M 295-1 IB

Ground Granulated Blast-Furnace Slag for Use in ConcreteM 302-06 and Mortars M 302-1 IB

Making and Curing Concrete Test Specimens in the Laboratory R 39-07 R 39-1 IB

ENVIRONMENTAL TESTS

R 23-99 (2008) Chemical, Biological, and Physical Analysis of Water R 23-1 IB

R 24-99 (2008) Collection and Preservation of Water Samples R 24-1 1B

GUARDRAIL AND FENCING

M 180-00 (2004) Corrugated Sheet Steel Beams for Highway Guardrail M 180-1 1A

M 181-05 Chain-Link Fence M 181-1 lA

M 269-96 (2004) Turnbuckles and Shackles M 269-1 IB

M 279-03 (2008) Metallic-Coated, Steel Woven Wire Fence Fabric M 279-1 IB

M 280-03 (2008) Metallic-Coated (Carbon) Steel Barbed Wire M 280-1 IB

M 281-96 (2004) Steel Fence Posts and Assemblies, Hot-Wrought M 281-1 1B

HYDRAULIC CEMENT

M 85-08 Portland Cement M 85-1 1A

M 240-08 Blended Hydraulic Cement M 240-1 1A

M 307-07 Silica Fume Used in Cementitious Mixtures M 307-1 IB

M 321-04 High-Reactivity Pozzolans for Use in Hydraulic-Cement Concrete, Mortar, and Grout M 321-1 IB

JOINT FILLER AND ASPHALT PLANK

M 33-99 (2007) Preformed Expansion Joint Filler for Concrete (Bituminous Type) M 33-1 1A

M 153-06 Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction M 153-1 1A

M 213-01 (2005) Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types) M 213-1 lA

M 220-84 (2007) Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements M 220-1 1A

M 251-06 Plain and Laminated Elastomeric Bridge Bearings M 251-1 1A

M 282-99 (2007) Joint Sealants, Hot-Poured, Elastomeric-Type, for Portland Cement Concrete Pavements M 282-1 IB

•

XIV

Number Title Page Volume

M 297-98 (2006) Preformed Polychloroprene Elastomeric Joint Seals for Bridges ..... M 297-1 IB

M 324-08 Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavement ' M 324-1 IB

METALLIC MATERIALS FOR BRIDGES

M 102M! M 102-06

Steel Forgings, Carbon and Alloy, for General Industrial Use ' M 102M! M 102-1

lA

M 103M! M 103-06

Steel Castings, Carbon, for General Application M 103M/ M 103-1

lA

M 105-07 Gray Iron Castings M 105-1 1A

M 107-04 Bronze Castings for Bridges and Turntables M 107-1 1A

M 108-05 Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use ' M 108-1 1A

M 111M! M 111-04

Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products ' M 111M! M 111-1

1A

M 120-08 Zinc M 120-1 1A

M 138M! M 138-08

Copper Sheet, Strip, Plate, and Rolled Bar M 138M! M 138-1

lA

M 160M/ M 160-08

General Requirements for Steel Plates, Shapes, Sheet Piling, and Bars for Structural Use M 160M/

M 160M-1 1A

M 163M! M 163-07

Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application M 163M/

M 163-1 1A

M 164-05 High-Strength Bolts for Structural Steel Joints M 164-1 1A

M 164M-06 High-Strength Bolts for Structural Steel Joints [Metric] , M 164M-1 1A

M 169-06 Steel Bars, Carbon and Alloy, Cold-Finished M 169-1 1A

M202M! M 202-08

Steel Sheet Piling M 202M/ M 202-1

1A

M227M! M 227-97 (2005)

Steel Bars, Carbon, Merchant Quality, Mechanical Properties ........ , M 227/ M 227M-1

1A

M232M! M 232-06

Zinc Coating (Hot-Dip) on Iron and Steel Hardware ' M 232M! M 232-1

1A

M 253-05 Structural Bolts, Alloy Steel, Heat-Treated, 150 ksi Minimum Tensile Strength .. M 253-1 1A

M 253M-05 High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] M 253M-1 ' 1A

M255M! M 255-05

Steel Bars, Carbon, Hot-Wrought, Sp~cial Quality, Mechanical Properties M 255M/

M 255-1 , lA

M 270M! M 270-08

Structural Steel for Bridges .. M 270M! M 270-1

1B

M 277-06 Wire Rope and Sockets for Movable Bridges .. M 277-1 1B

•

xv

~

Number

M 285M! M 285-07

M 291-06

M 291M-07

M292M! M 292-07

M 293-06

M293M-06

M 298-05

M299-05

M 314-90 (2004)

MISCELLANEOUS

M 143-03 (2007)

M 144-07

M 200-73 (2007)

M 230-07

M 235M/ M 235-03 (2007)

R 1-04

R 8-96 (2004)

R 10-06

R 16-04

R 25-00 (2005)

R 34-03 (2008)

R 44-07

Title

Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

Carbon and Alloy Steel Nuts

Carbon and Alloy Steel Nuts [Metric]

Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both

Hardened Steel Washers

Hardened Steel Washers [Metric]

Coatings of Zinc Mechanically Deposited on Iron and Steel

Coatings of Cadmium Mechanically Deposited

Steel Anchor Bolts

Sodium Chloride

Calcium Chloride

Epoxy Protective Coatings

Expanded and Extruded Foam Board (Polystyrene)

Epoxy Resin Adhesives

Discontinued-Use of the International System of Units

Evaluation of Transportation-Related Earthborne Vibrations

Definition of Terms Related to Quality and Statistics As Used in Highway Construction

Regulatory Information for Chemicals Used in AASHTO Tests

Technician Training and Qualification Programs

Evaluating Deicing Chemicals

Independent Assurance (lA) Programs

PAINTING AND TRAFFIC MARKING AND SIGNING

M 237-96 (2005)

M 247-08

M 248-91 (2007)

M 249-08

M 268-08

M 290-96 (2004)

M 300-03 (2007)

R 31-08

Epoxy Resin Adhesives for Bonding Traffic Markers to Hardened Portland Cement and Asphalt Concrete

Glass Beads Used in Traffic Paints

Ready-Mixed White and Yellow Traffic Paints

White and Yellow Reflective Thermoplastic Striping Material (Solid Form)

Retroreflective Sheeting for Traffic Control

Acrylic Prismatic Reflectors and Embossed Aluminum Frames for Signs

Inorganic Zinc-Rich Primer • Evaluation of Coating Systems with Zinc-Rich Primers

Page

M 285M/ .. IB M 285-1

M 291-1 .. IB

.. M 291M-I lB

M292M!.. IB M 292-1

M 293-1 . IB

M 293M-I . IB

.. M 298-1 IB

M 299-1 . IB

M 314-1 . IB

M 143-1 IA

M 144-1 IA

M 200-1 IA

M 230-1 IA

M 235-1 IA

R I-I IB

R 8-1 lB

IB RIO-I

R 16-1 IB

R 25-1 IB

R 34-1 IB

R 44-1 lB

M 237-1 .. IA

M 247-1 . IA

M 248-1 . IA

M 249-1 .. IA

.. M 268-1 IB

M 290-1 . IB

M 300-1 .. IB

. R 31-1 IB

xvi

ell' Number Title Page Volume

PAVEMENT SURFACE CHARACTERISTICS

R 36-04 , Evaluating Faulting of Concrete Pavements . R 36-1 IB

R 37-04 Application of Ground-Penetrating Radar (GPR) to Highways . R 37-1 IB

R 40-05 Measuring Pavement Profile Using a Rod and Level . R 40-1 IB

R41-05 Measuring Pavement Profile Using a Dipstick . R 41-1 IB

R43MIR 43-07 Quantifying Roughness of Pavements . R43M/ IB R 43-1

R48-08 Determining Rut Depth in Pavements . R 48-1 IB

QUALITY ASSURANCE

R 4-97 (2005) Statistical Procedures .. R 4-1 IB

R 9-05 Acceptance Sampling Plans for Highway Construction . R 9-1 1B

R 11-06 Discontinued-Indicating Which Places of Figures Are to Be Considered Significant in Specified Limiting Values . R 11-1 IB

R 18-08 Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories . R 18-1 IB

R 20-99 (2008) Procedures for Measuring Highway Noise .. R20-1 IB

R38-04 Quality Assurance of Standard Manufactured Materials . R 38-1 IB

R42-06 Developing a Quality Assurance Plan for Hot Mix Asphalt (HMA) . R42-1 1B

REINFORCING STEEL AND WIRE ROPE

M 30-02 (2006) Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail M 30-1 lA

M31M! Deformed and Plain Carbon Steel Bars for M 31-07 Concrete Reinforcement M 31M/ IA

M 31-1

M32M/ Steel Wire, Plain, for Concrete Reinforcement M 32M! lA M32-07 M32-1

M54M/ Welded Deformed Steel Bar Mats for Concrete Reinforcement ...... M 54M/ M 54-07 M 54-1 lA

M55M/ Steel Welded Wire Reinforcement, Plain, for Concrete M 55M! IA M 55-07 M 55-1

M203M/ Steel Strand, Uncoated Seven-Wire for Concrete Reinforcement .... M 203M/ lA M 203-07 M 203-1

M204M/ Uncoated Stress-Relieved Steel Wire for Prestressed Concrete ....... M 204M/ IA M204-06 M 204-1

M221M/ Steel Welded Wire Reinforcement, Deformed, for Concrete M 221M/ lA M 221-05 M 221-1

M225M! Steel Wire, Deformed, for Concrete Reinforcement M 225M/ lA M 225-07 M 225-1

M 254-06 Corrosion-Resistant Coated Dowel Bars M 254-1 IA

M275M/ Uncoated High-Strength Steel Bars for Prestressing Concrete M 275M/ IB M 275-08 M 275-1 •

xvii

Number Title Page Volume

M284M/ Epoxy-Coated Reinforcing Bars: M 284-08 Materials and Coating Requirements M 284M/ 1B

M 284-1

M 317M/ Epoxy-Coated Reinforcing Bars: Handling M 317-03 (2007) Requirements for Fabrication and Job Site M 317M/ 1B

M 317-1

M 322M/ Rail-Steel and Axle-Steel Deformed M 322-07 Bars for Concrete Reinforcement M 322M/ 1B

M 322-1

SOILS AND STABILIZATION

M 57-80 (2004) Materials for Embankments and Subgrades M 57-1 . lA

M 145-91 (2004) Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes M 145-1 . lA

M 146-91 (2004) Terms Relating to Subgrade, Soil-Aggregate, and Fill Materials M 146-1 . lA

M 147-65 (2004) Materials for Aggregate and Soil-Aggregate Subbase, Base, and Surface Courses M 147-1 .. 1A

M 155-87 (2004) Discontinued--Granular Material to Control Pumping Under Concrete Pavement M 155-1 .. lA

M 216-05 Lime for Soil Stabilization M 216-1 .. lA

M 288-06 Geotextile Specification for Highway Applications M 288-1 .. 1B

M 318-02 (2006) Glass Cullet Use for Soil-Aggregate Base Course M 318-1 .. IB

M 319-02 (2006) Reclaimed Concrete Aggregate for Unbound Soil-Aggregate Base Course M 319-1 . 1B

R 13-03 (2007) Conducting Geotechnical Subsurface Investigations R13-1. 1B

R 21-96 (2004) Drilling for Subsurface Investigations-Unexpectedly Encountering Suspected Hazardous Material R 21-1 .. 1B

R 22-97 (2005) Decommissioning Geotechnical Exploratory Boreholes R 22-1 . 1B

R 27-01 (2006) Assessment of Corrosion of Steel Piling for Non-Marine Applications R 27-1 . 1B

TESTING EQUIPMENT

M 92-05 Wire-Cloth Sieves for Testing Purposes M 92-1 1A

M 152M/ Flow Table for Use in Tests of Hydraulic Cement M 152M/ lA M 152-06 M 152-1

M 201-08 Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Te~ting of Hydraulic Cements and Concretes M 201-1 .. 1A

M 231-95 (2006) Weighing Devices Used in the Testing of Materials M 231-1 . 1A

M 261-96 (2004) Standard Tire for Pavement Frictional-Property Tests M 261-1 . IB

M 286-96 (2004) Smooth-Tread Standard Tire for Special-Purpose Pavement Frictional-Property Tests M 286-1 .. 1B

R 32-03 (2008) Calibrating the Load Cell and Deflection Sensors for a Falling

• Weight Deflectometer R 32-1 . 1B

XVlll

Number

R 33-03 (2008)

R45-08

Title

Calibrating the Reference Load Cell Used for Reference Calibrations for Falling Weight Deflectometer

Installing, Monitoring, and Processing Data of the Traveling Type Slope Inclinometer...

Page

R 33-1

R 45-1 lB

IB

Volume

TIMBER AND PRESERVATIVES

M 133-07 Preservatives and Pressure Treatment Processes for Timber

M 168-07 Wood Products

M 133-1

M 168-1

lA

lA

DELETED SPECIFICATIONS

The following specifications have been deleted from the 28th Edition:

M 271-02 The Evaluation of Blast-Cleaned Steel Surfaces

R 12-85 (2002) Bituminous Mixture Design Using the Marshall and Hveem Procedures

•

XiX

PART I SPECIFICATIONS

Table of Contents

NUMERICAL SEQUENCE

Number Title Page Volume

M6·08 Fine Aggregate for Hydraulic Cement Concrete ............................ M 6-1 1A

M 17-07 Mineral Filler for Bituminous Paving Mixtures ............................. M 17-1 1A

M 20-70 (2004) Penetration-Graded Asphalt Cement .............................................. M 20-1 1A

M 29-03 (2007) Fine Aggregate for Bituminous Paving Mixtures .......................... M 29-1 1A

M 30-02 (2006) Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail ......................................................................... M 30-1 1A

M 31M/M 31-07 Deformed and Plain Carbon Steel Bars for Concrete Reinforcement ................................................... M31M! 1A

M 31-1

M 32M/M 32-07 Steel Wire, Plain, for Concrete Reinforcement .............................. M32M/ 1A M 32-1

M 33-99 (2007) Preformed Expansion Joint Filler for Concrete (Bituminous Type) .................................................... M 33-1 1A

M 36-03 (2007) Corrugated Steel Pipe, Metallic-Coated, for Sewers and Drains ... M36-1 1A

M 43-05 Sizes of Aggregate for Road and Bridge Construction .................. M 43-1 1A

M45-06 Aggregate for Masonry Mortar ...................................................... M45-1 1A

M54M! Welded Deformed Steel Bar Mats for Concrete Reinforcement .... M54M! 1A M 54-07 M 54-1

M 55M/M 55-07 Steel Welded Wire Reinforcement, Plain, for Concrete ................ M55M/ 1A M 55-1

M 57-80 (2004) Materials for Embankments and Subgrades ................................... M 57-1 lA

M 80-08 Coarse Aggregate for Hydraulic Cement Concrete ........................ M 80-1 1A

M 81-92 (2004) Cutback Asphalt (Rapid-Curing Type) .......................................... M 81-1 1A

M 82-75 (2004) Cutback Asphalt (Medium-Curing Type) ...................................... M 82-1 1A

M 85-08 Portland Cement ............................................................................. M 85-1 1A

M 86M/M 86-07 Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe .... M86M/ 1A M 86-1

M 91-07 Sewer and Manhole Brick (Made from Clay or Shale) .................. M 91-1 1A

M 92-05 Wire-Cloth Sieves for Testing Purposes ........................................ M 92-1 1A

M 102M! Steel Forgings, Carbon and Alloy, for General Industrial Use ...... M 102M! 1A M 102-06 M 102-1

M 103M! Steel Castings, Carbon, for General Application ........................... M 103M/ 1A M 103-06 M 103-1

M 105-07 Gray Iron Castings ......................................................................... M 105-1 1A

M 107-04 Bronze Castings for Bridges and Turntables .................................. M 107-1 1A

M 108-05 Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use ............................ M 108-1 1A

•

xxi

Number Title Page Volume

M 111M! Zinc (Hot-Dip Galvanized) Coatings M 111-04 on Iron and Steel Products . M 111M/ 1A

M 111-1

M 114-07 Building Brick (Solid Masonry Units Made from Clay or Shale) . M 114-1 1A

M 120-08 Zinc . M20-1 1A

M 133-08 Preservatives and Pressure Treatment Processes for Timber . M 133-1 1A

M 138M/ Copper Sheet, Strip, Plate, and Rolled Bar . M 138M/ 1A M 138-08 M 138-1

M 140-03 (2007) Emulsified Asphalt .. M 140-1 1A

M 143-03 (2007) Sodium Chloride .. M 143-1 1A

M 144-07 Calcium Chloride .. M 144-1 1A

M 145-91 (2004) Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes . M 145-1 1A

M 146-91 (2004) Terms Relating to Subgrade, Soil-Aggregate, and Fill Materials .. M 146-1 1A

M 147-65 (2004) Materials for Aggregate and Soil-Aggregate Subbase, Base, and Surface Courses .. M 147-1 1A

M 148-05 Liquid Membrane-Forming Compounds for Curing Concrete .. M 148-1 1A

M 152M/M 152-06 Flow Table for Use in Tests of Hydraulic Cement . M 152M/ 1A M 152-1

M 153-06 Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction .. M 153-1 1A

M 154-06 Air-Entraining Admixtures for Concrete .. M 154-1 1A

M 155-87 (2004) Discontinued-Granu1ar Material to Control Pumping Under Concrete Pavement .. M 155-1 1A

M 156-97 (2005) Requirements for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures .. M 156-1 1A

M 157-06 Ready-Mixed Concrete .. M 157-1 1A

M 160M/ General Requirements for Steel Plates, Shapes, Sheet Piling, M 160-08 and Bars for Structural Use . M 160M! 1A

M 160-1

M 163M/ Castings, Iron-Chromium, Iron-Chromium-Nicke1, M 163-07 Corrosion Resistant, for General Application . M 163M/ 1A

M 163-1

M 164-05 High-Strength Bolts for Structural Steel Joints . M 164-1 1A

M 164M-06 High-Strength Bolts for Structural Steel Joints [Metric] . M 164M-1 1A

M 167M/ Corrugated Steel Structural Plate, Zinc-Coated, M 167-05 for Field-Bolted Pipe, Pipe-Arches, and Arches .. M 167M/ 1A

M 167-1

M 168-07 Wood Products . M 168-1 1A

M 169-06 Steel Bars, Carbon and Alloy, Cold-Finished .. M 169-1 1A

M 170-08 Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe .. M 170-1 1A

M 170M-08 Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric] . M 170M-1 1A

M 171-05 • Sheet Materials for Curing Concrete .. M 171-1 1A

XXll

uloNumber

. M175MJ M 175-05

; at 176MJ .• 1'. j M 176-07

, M 178MJ M 178-07

ld 180-00 (2004)

M 181-05

M1~2-05

,¥ 190-04

. 11 194MJ : I" M 194-06

M 195-06

M196-92 (2004)

M197-06

.M198-08

\, .. M 199M/

M 199-08

M200-73 (2007) '" M201-08

M202MJ M 202-08

M203MJ M203-07

M204MJ M204-06

M205MJ M205-08

M206MJ M 206-08

M207MJ M207-08

M 208-01 (2005)

M 210-06

M 213-01 (2005)

M 216-05

•

Title

Perforated Concrete Pipe ..

Porous Concrete Pipe .

Concrete Drain Tile ..

Corrugated Sheet Steel Beams for Highway Guardrail .

Chain-Link Fence .

Burlap Cloth Made from Jute or Kenaf and Cotton Mats " .

Bituminous-Coated Corrugated Metal Culvert Pipe and Pipe-Arches

Chemical Admixtures for Concrete

.

.

Lightweight Aggregates for Structural Concrete ..

Corrugated Aluminum Pipe for Sewers and Drains .

Aluminum Alloy Sheet for Corrugated Aluminum Pipe ..

Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants ..

Precast Reinforced Concrete Manhole Sections .

Epoxy Protective Coatings ..

Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes ..

Steel Sheet Piling ..

Steel Strand, Uncoated Seven-Wire for Concrete Reinforcement .

Uncoated Stress-Relieved Steel Wire for Prestressed Concrete .....

Molds for Forming Concrete Test Cylinders Vertically

Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe ..

Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe .

Cationic Emulsified Asphalt : .

Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete ..

Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types) .

Lime for Soil Stabilization ..

Page

M 175M/ M 175-1

M 176M/ M176-1

M 178M! M 178-1

M 180-1

M 181-1

M 182-1

M 190-1

M 194M/ M 194-1

M 195-1

M 196-1

M 197-1

M 198-1

M 199M M 199-1

M 200-1

M 201-1

M 202M/ M 202-1

M 203M/ M 203-1

M204M! M 204-1

M 205M/ M 205-1

M 206M/ M 206-1

M 207M/ M 207-1

M 208-1

M 210-1

M 213-1

M 216-1

Volume

1A

IA

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

1A

xxiii

Number

M 218-03 (2007)

M 219-92 (2004)

M 220-84 (2007)

M 221M! M 221-05

M 224-91 (2004)

M225M! M225-07

M 226-80 (2004)

M227M! M 227-97 (2005)

M 230-07

M 231-95 (2006)

M 232M! M232-06

M 233-86 (2004)

M235M! M 235-03 (2007)

M 237-96 (2005)

M 240-08

M 241M! M 241-06

M242M! M 242-08

M 243-96 (2004)

M 245-00 (2004)

M 246-05

M 247-08

M 248-91 (2007)

M 249-08

M 251-06

M 252-08

M 253-05

•

Title

Steel Sheet, Zinc-Coated (Galvanized), for Corrugated Steel Pipe

Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

Steel Welded Wire Reinforcement, Deformed, for Concrete

Use of Protective Sealers for Portland Cement Concr,ete

Steel Wire, Deformed, for Concrete Reinforcement

Viscosity-Graded Asphalt Cement

Steel Bars, Carbon, Merchant Quality, Mechanical Properties

Expanded and Extruded Foam Board (Polystyrene)

Weighing Devices Used in the Testing of Materials

Zinc Coating (Hot-Dip) on Iron and Steel Hardware

Boiled Linseed Oil Mixture for Treatment of Portland Cement Concrete

Epoxy Resin Adhesives

Epoxy Resin Adhesives for Bonding Traffic Markers to Hardened Portland Cement and Asphalt Concrete

Blended Hydraulic Cement

Concrete Made by Volumetric Batching and Continuous Mixing

Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe

Field-Applied Coating of Corrugated Metal Structural Plate for Pipe, Pipe-Arches, and Arches

Corrugated Steel Pipe, Polymer-Precoated, for Sewers and Drains

Steel Sheet, Metallic-Coated and Polymer-Precoated, for Corrugated Steel Pipe

Glass Beads Used in Traffic Paints

Ready-Mixed White and Yellow J'raffic Paints

White and Yellow Reflective Thermoplastic Striping Material (Solid Form)

Plain and Laminated Elastomeric Bridge Bearings

Corrugated Polyethylene Drainage Pipe

Structural Bolts, Alloy Steel, Heat-Treated, ISO ksi Minimum Tensile Strength

.

..

.

.

..

.

..

..

..

..

..

..

.

.

.

.

..

.

.

.

.

..

.

.

..

.

Page Volume

M 218-1 IA

M 219-1 IA

M 220-1 IA

M221M! IA M 221-1

M 224-1 IA

M225M! IA M 225-1

M 226-1 IA

M227M! IA M 227-1

M 230-1 IA

M 231-1 IA

M232MJ IA M 232-1

M 233-1 IA

M 235M! IA M 235-1

M 237-1 IA

M 240-1 IA

M241M IA M 241-1

M242M IA M 242-1

M 243-1 IA

M 245-1 IA

M 246-1 IA

M 247-1 IA

M 248-1 IA

M 249-1 IA

M 251-1 IA

M 252-1 IA

M 253-1 IA

xxiv

M254-06

M255M1 M 255-05

M 259-98 (2006)

M 259M-00 (2004)

M 261-96 (2004)

M 262-07

M 264-03 (2007)

M 268-08

M 269-96 (2004)

M270Ml M270-08

M 273-00 (2004)

M 273M-00 (2004)

M 274-87 (2004)

M275M1 M 275-08

M277-06

M 278-02 (2007)

M 279-03 (2008)

M 280-03 (2008)

M 281-96 (2004)

M 282-99 (2007)

M284M/ M 284-08

M285M1 M285-07

M 286-96 (2004)

M288-06

M 289-91 (2004)

•

Title High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

Corrosion-Resistant Coated Dowel Bars

Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

Precast Reinforced Concrete Box Sections for Culverts, Stonn Drains, and Sewers

Precast Reinforced Concrete Box Sections for Culverts, Stonn Drains, and Sewers [Metric]

Standard Tire for Pavement Frictional-Property Tests

Concrete Pipe and Related Products

Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping

Retroreflective Sheeting for Traffic Control

Turnbuckles and Shackles

Structural Steel for Bridges

Precast Reinforced Concrete Box Sections for Culverts, Stonn Drains, and Sewers with Less Than Two Feet of Cover Subjected to Highway Loadings

Precast Reinforced Concrete Box Sections for Culverts, Stonn Drains, and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings [Metric]

Steel Sheet, Aluminum-Coated (Type 2), for Corrugated Steel Pipe

Uncoated High-Strength Steel Bars for Prestressing Concrete

Wire Rope and Sockets for Movable Bridges

Class PS46 Poly(Vinyl Chloride) (PVC) Pipe

Metallic-Coated Steel Woven Wire Fence Fabric

Metallic-Coated (Carbon) Steel Barbed Wire

Steel Fence Posts and Assemblies, Hot-Wrought

Joint Sealants, Hot-Poured, Elastomeric-Type, for Portland Cement Concrete Pavements

Epoxy-Coated Reinforcing Bars: Materials and Coating Requirements

Castings, lron-Chromium-Nickel, Corrosion Resistant, for Severe Service

Smooth-Tread Standard Tire for Special-Purpose Pavement Frictional-Property Tests

Geotextile Specification for Highway Applications

Aluminum-Zinc Alloy Coated Sheet Steel for Corrugated Steel Pipe

xxv

.

.

.

.

..

.

..

.

.

.

.

.

..

..

.

.

..

..

..

..

..

..

.

.

..

.

Page Volume

M 253M-I IA

M 254-1 lA

M 255M/ IA M 255-1

M 259-1 lA

M 259M-l lA

M 261-1 IB

M 262-1 1B

M 264-1 1B

M 268-1 1B

M 269-1 IB

M 270M/ IB M 270-1

M 273-1 1B

M 273M-l IB

M 274-1 IB

M 275M/ 1B M 275-1

M 277-1 1B

M 278-1 1B

M 279-1 IB

M 280-1 IB

M 281-1 1B

M 282-1 IB

M 284M/ IB M 284-1

M 285M/ 1B M 285-1

M 286-1 1B

M 288-1 1B

M 289-1 1B

Number

M 290-96 (2004)

M 291-06

M 291M-07

M 292M! M 292-08

M 293-06

M293M-06

M 294-08

M 295-07

M 297-98 (2006)

M 298-05

M 299-05

M 300-03 (2007)

M 302-06

M 303-89 (2006)

M 304-03 (2007)

M 306-07

M 307-07

M 314-90 (2004)

M 315-07

M 315M-07

M 316-99 (2007)

M 317M/ M 317-03 (2007)

M 318-02 (2006)

M 319-02 (2006)

M 320-05

M 321-04

M 322M/ M 322-07

M 323-07

M 324-08

•

Title

Acrylic Prismatic Reflectors and Embossed Aluminum Frames for Signs

Carbon and Alloy Steel Nuts

Carbon and Alloy Steel Nuts [Metric]

Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both

Hardened Steel Washers

Hardened Steel Washers [Metric]

Corrugated Polyethylene Pipe, 300- to 1500-mm Diameter

Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

Preformed Polychloroprene Elastomeric Joint Seals for Bridges

Coatings of Zinc Mechanically Deposited on Iron and Steel

Coatings of Cadmium Mechanically Deposited

Inorganic Zinc-Rich Primer

Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars

Lime for Asphalt Mixtures

Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter

Drainage, Sewer, Utility, and Related Castings

Silica Fume Used in Cementitious Mixtures

Steel Anchor Bolts

Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

Joints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets [Metric]

Polymer-Modified Cationic Emulsified Asphalt

Epoxy-Coated Reinforcing Bars: Handling Requirements for Fabrication and Job Site

Glass Cullet Use for Soil-Aggregate Base Course

Reclaimed Concrete Aggregate for Unbound Soil-Aggregate Base Course

Performance-Graded Asphalt Binder

High-Reactivity Pozzolans for. Use in Hydraulic-Cement Concrete, Mortar, and Grout

Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

Superpave Volumetric Mix Design

Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

xxvi

.

..

..

.

..

.

..

..

..

..

.

.

..

..

..

..

.

.

.

..

..

.

.

.

..

..

.

..

..

Page Volume

M 290-1 IB

M 291-1 IB

M 291M-l 1B

M 292M/ 1B M 292-1

M 293-1 IB

M 293M-l 1B

M 294-1 IB

M 295-1 IB

M 297-1 IB

M 298-1 IB

M 299-1 1B

M 300-1 1B

M 302-1 1B

M 303-1 IB

M 304-1 1B

M 306-1 1B

M 307-1 1B

M 314-1 IB

M 315-1 1B

M 315M-l 1B

M 316-1 IB

M 317M/ 1B M317-1

M 318-1 IB

M 319-1 1B

M 320-1 1B

M 321-1 1B

M 322M/ 1B M 322-1

M 323-1 1B

M 324-1 1B

Ie Ilk Number Title

R 1-04 Discontinued-Use of the International System of Units ..............

R 4-97 (2005) Statistical Procedures .................................................. ,..................

RS-08 Selection and Use of Emulsified Asphalts .....................................

R 8-96 (2004) Evaluation of Transportation-Related Earthbome Vibrations ........

R 9-05 Acceptance Sampling Plans for Highway Construction ................

R 10-06 Definition of Terms Related to Quality and

R 11-06 Discontinued-Indicating Which Places of Figures Are to 8e

R 13-03 Conducting Geotechnical Subsurface Investigations .....................

R 14-88 (2007) Classifying Hot Mix Recycling Agents .........................................

R 15-00 (2004) Asphalt Additives and Modifiers ...................................................

R 16-04 Regulatory Information for Chemicals Used in AASHTO Tests ...

R 18-08 Establishing and Implementing a Quality Management

R 20-99 (2008) Procedures for Measuring Highway Noise ....................................

, R 22-97 (2005) Decommissioning Geotechnical Exploratory 8oreholes ................

R 23-99 (2008) Chemical, 8iological, and Physical Analysis of Water ..................

R 24-99 (2008) Collection and Preservation of Water Samples ..............................

R 25-00 (2005) Technician Training and Qualification Programs ..........................

R 26-01 (2005) Certifying Suppliers of Performance-Graded Asphalt Binders ......

R28-06 Accelerated Aging of Asphalt 8inder

R 29-08 Grading or Verifying the Performance

R 30-02 (2006) Mixture Conditioning of Hot Mix Asphalt ....................................

R31-08 Evaluation of Coating Systems with Zinc-Rich Primers ................

R 34-03 (2008) Evaluating Deicing Chemicals .......................................................

R35-04 Superpave Volumetric Design for Hot Mix Asphalt ......................

R36-04 Evaluating Faulting of Concrete Pavements ..................................

R37-04 Application of Ground-Penetrating Radar (GPR) to Highways .....

Page Volume Stone Matrix Asphalt (SMA) .........................................................

Polyethylene (PE) Liner Pipe, 300- to 1600-mm Diameter, Based on Controlled Outside Diameter ..........................................

Statistics As Used in Highway Construction ..................................

Considered Significant in Specified Limiting Values ....................

System for Construction Materials Testing Laboratories ...............

R 21-96 (2004) Drilling for Subsurface Investigations-Unexpectedly Encountering Suspected Hazardous Material ................................

R 27-01 (2006) Assessment ofCorrosion of Steel Piling for Non-Marine Applications ..............................................

Using a Pressurized Aging Vessel (PAV) ......................................

Grade (PG) of an Asphalt 8inder ...................................................

R 32-03 (2008) Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometer ..................................

R 33-03 (2008) Calibrating the Reference Load Cell Used for Reference Calibrations for Falling Weight Deflectometer ..............................

R38-04 Quality Assurance of Standard Manufactured Materials ...............•

M 325-1 18

M 326-1 18

R 1-1 18

R 4-1 18

R 5-1 18

R 8-1 18

R 9-1 18

R 10-1 18

R 11-1 18

R 13-1 18

R 14-1 18

R 15-1 18

R 16-1 18

R 18-1 18

R 20-1 18

R 21-1 18

R 22-1 IB

R 23-1 IB

R 24-1 18

R 25-1 18

R 26-1 18

R 27-1 IB

R 28-1 18

R 29-1 18

R 30-1 18

R 31-1 18

R 32-1 18

R 33-1 18

R 34-1 18

R 35-1 18

R 36-1 18

R 37-1 18

R 38-1 18

Number Title Page

R 39-07 Making and Curing Concrete Test Specimens in the Laboratory .. R 39-1

R40-05 Measuring Pavement Profile Using a Rod and Level . R40-1

R41-05 Measuring Pavement Profile Using a Dipstick .. R 41-1

R42-06 Developing a Quality Assurance Plan for Hot Mix Asphalt (HMA) .. R42-1 IB

R 43MIR 43-07 QuantifYing Roughness of Pavements .. R43M/ 18 R43-1

R44-07 Independent Assurance (IA) Programs .. R44-1 18

R45-08 Installing, Monitoring, and Processing Data of the Traveling Type Slope Inclinometer .. R 45-1 IB

R 46-08 Designing Stone Matrix Asphalt (SMA) . R 46-1 18

R 47-08 Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size .. R47-1 18

R 48-08 Determining Rut Depth in Pavements . R48-1 IB

DELETED SPECIFICATIONS The following specifications have been deleted from the 28th Edition:

M 271-02 The Evaluation of Blast-Cleaned Steel Surfaces

R 12-85 (2002) Bituminous Mixture Design Using the Marshall and Hveem Procedures

•

xxviii

PART" SPECIFICATIONS

Table of Contents

SUBJECT SEQUENCE

Number Title Page Volume

AGGREGATES

T 2-91 (2006) Sampling of Aggregates .. T 2-1 2A

T 11-05 Materials Finer Than 75-I-lm (No. 200) Sieve in Mineral Aggregates by Washing T 11-1. 2A

T 19M/T 19-00 Bulk Density ("Unit Weight") and Voids in Aggregate T 19M/ . 2A (2004) T 19-1

T 21-05 Organic Impurities in Fine Aggregates for Concrete T 21-1 .. 2A

T 27-06 Sieve Analysis of Fine and Coarse Aggregates T 27-1 .. 2A

T 30-08 Mechanical Analysis of Extracted Aggregate T 30-1 .. 2A

T 37-07 Sieve Analysis of Mineral Filler for Hot Mix Asphalt T 37-1 .. 2A

T 71-08 Effect of Organic Impurities in Fine Aggregate on Strength of Mortar T 71-1 .. 2A

T 84-08 Specific Gravity and Absorption of Fine Aggregate T 84-1 .. 2A

T 85-08 Specific Gravity and Absorption of Coarse Aggregate T 85-1 . 2A

T 96-02 (2006) Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine T 96-1 .. 2A

T 103-08 Soundness of Aggregates by Freezing and Thawing T 103-1 . 2A

T 104-99 (2007) Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate T 104-1 . 2A

T 112-00 (2004) Clay Lumps and Friable Particles in Aggregate T 112-1 .. 2A

T 113-06 Lightweight Pieces in Aggregate T 113-1 .. 2A

T 210-05 Aggregate Durability Index T 210-1 . 2A

T 248-02 (2006) Reducing Samples of Aggregate to Testing Size T 248-1 .. 2B

T 255-00 (2004) Total Evaporable Moisture Content of Aggregate by Drying T 255-1 .. 2B

T 279-96 (2006) Accelerated Polishing of Aggregates Using the British Wheel T 279-1 .. 2B

T 304-08 Uncompacted Void Content of Fine Aggregate T 304-1 . 2B

T 326-05 Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape, Surface Texture, and Grading) T 326-1 . 2B

T 327-06 Resistance of Coarse Aggregate Degradation by Abrasion in the Micro-Deval Apparatus T 327-1 . 2B

T 330-07 The Qualitative Detection of HarmfulClays of the Smectite Group in Aggregates Using Methylene Blue T 330-1 .. 2B

BITUMINOUS MATERIALS

T 40-02 (2006) Sampling Bituminous Materials T 40-1 2A

T 44-03 (2007) Solubility of Bituminous Materials T 44-1 2A

•

xi

Number

T 48-06

T 49-07

T 50-99 (2003)

T 51-08

T 53-08

T 55-02 (2006)

T 59-08

T 72-97 (2005)

T 78-05

T 79-96 (2004)

T 102-83 (2004)

T 110-03 (2007)

T 111-83 (2004)

T 164-08

T 165-02 (2006)

T 166-07

T 167-05

T 168-03 (2007)

T 170-00 (2005)

T 179-05

T 195-67 (2006)

T 200-79 (2006)

T 201-03 (2007)

T 202-03 (2007)

T 209-08

T 227-02 (2006)

T 228-06

T 240-08

T 245-97 (2004)

T 246-07

T 247-02 (2006)

T 269-97 (2007)

Title

Flash and Fire Points by Cleveland Open Cup .

Penetration of Bituminous Materials ..

Float Test for Bituminous Materials .

Ductility of Bituminous Materials .

Softening Point of Bitumen (Ring-and-Ball Apparatus) .

Water in Petroleum Products and Bituminous Materials by Distillation .

Testing Emulsified Asphalts .

Saybolt Viscosity .

Distillation of Cutback Asphaltic (Bituminous) Products .

Flash Point with Tag Open-Cup Apparatus for Use with Material Having a Flash Less Than 93.3°C (200°F) .

Spot Test of Asphaltic Materials .

Moisture or Volatile Distillates in Hot Mix Asphalt (HMA) ..

Inorganic Matter or Ash in Bituminous Materials .

Quantitative Extraction of Asphalt Binder from Hot Mix Asphalt (HMA) .

Effect of Water on Cohesion ofCompacted Bituminous Mixtures ..

Bulk Specific Gravity of Compacted Hot Mix Asphalt Mixtures Using Saturated Surface-Dry Specimens .

Compressive Strength of Hot Mix Asphalt Mixtures .

Sampling Bituminous Paving Mixtures .

Recovery of Asphalt from Solution by Abson Method .

Effect of Heat and Air on Asphalt Materials (Thin-Film Oven Test) .

Determining Degree of Particle Coating of Asphalt Mixtures ..

pH of Aqueous Solutions with the Glass Electrode ..

Kinematic Viscosity of Asphalts (Bitumens) ..

Viscosity of Asphalts by Vacuum Capillary Viscometer .

Theoretical Maximum Specific Gravity and Density ofHot Mix Asphalt (HMA) .

Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method .

Specific Gravity of Semi-Solid Bituminous Materials ..

Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) .

Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus .

Resistance to Deformation and Cohesion of Bituminous Mixtures by Means ofHveem Apparatus .

Preparation ofTest Specimens of Bituminous Mixtures by Means ofCalifornia Kneading Compactor .

Percent Air Voids in Compacted Dense and Open Asphalt Mixtures .

•

xii

Page

T 48-1 2A

T 49-1 2A

T 50-I 2A

T 51-I 2A

T 53-I 2A

T 55-I 2A

T 59-I 2A

T 72-1 2A

T 78-1 2A

T 79-1 2A

T 102-1 2A

T 110-1 2A

TIll-I 2A

T 164-1 2A

T 165-1 2A

T 166-1 2A

T 167-1 2A

T 168-1 2A

T 170-1 2A

T 179-1 2A

T 195-1 2A

T 200-1 2A

T 201-1 2A

T 202-1 2A

T 209-1 2A

T 227-1 2A

T 228-1 2B

T 240-1 2B

T 245-1 2B

T 246-1 2B

T 247-1 2B

T 269-1 2B

ume Number Title Page Volume

T 275-07 Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens . T 275-1 2B

T283-07 Resistance of Compacted Hot Mix Asphalt (HMA) to Moisture-Induced Damage . T 283-1 2B

T 287-06 Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method . T 287-1 2B

T 295-08 Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method .. T 295-1 2B

T 300-00 (2004) Force Ductility Test of Asphalt Materials .. T 300-1 2B

T 301-08 Elastic Recovery Test of Bituminous Materials by Means of a Ductilometer . T 301-1 2B

T 302-05 Polymer Content of Polymer-Modified Emulsified Asphalt Residue and T 302-1 2B Asphalt Binders .

T 305-97 (2005) Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures .. T 305-1 2B

T 308-08 Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method . T 308-1 2B

T 312-08 Preparing and Determining the Density of the Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor . T3l2-l 2B

T 313-08 Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) . T 313-1 2B

T 314-06 Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) . T 314-1 2B

T3l5-08 Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) .. T 315-1 2B

T 316-07 Viscosity Determination of Asphalt Binder Using Rotational Viscometer .. T 316-1 2B

T 319-08 Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures . T 319-1 2B

T 320-07 Determining Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST) . T 320-1 2B

T 321-07 Determining the Fatigue Life of Compacted Hot Mix Asphalt (HMA) Subjected to Repeated Flexural Bending .. T 321-1 2B

T 322-07 Determining the Creep Compliance and Strength of Hot Mix Asphalt (HMA) Using the Indirect Tensile Test Device .. T 322-1 2B

T 324-04 Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt (HMA) . T 324-1 2B

T 329-08 Moisture Content of Hot Mix Ashpalt (HMA) by Oven Method . T 329-1 2B

T 331-08 Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum 'Sealing Method .. T 331-1 2B

BOX CULVERT, CULVERT PIPE, AND DRAIN TILE

T 241-95 (2004) Helical Continuously Welded Seam Corrugated Steel Pipe T 241-1 2B

T 249-03 (2007) Helical Lock Seam Corrugated Pipe........................ T 249-1 2B

T 280-06 • Concrete Pipe, Manhole Sections, or Tile T 280-1 2B

X111

Number Title Page T 281-06 Vitrified Clay Pipe T 281-1

BRICK

T 32-08 Sampling and Testing Brick T 32-1 2A

CONCRETE, CURING MATERIALS, AND ADMIXTURES

T 22-07 Compressive Strength ofCyJindrical Concrete Specimens T 22-1 2A

T 23-08 Making and Curing Concrete Test Specimens in the Field T 23-1 2A

T 24M/T 24-07 Obtaining and Testing Drilled Cores and Sawed Beams of Concrete T 24-1 2A

T 26-79 (2004) Quality of Water to Be Used in Concrete T 26-1 2A

T 97-03 Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) T 97-1 2A

T 119M/T 119-07 Slump of Hydraulic Cement Concrete T 119M! 2A T 119-1

T 121M/T 121-05 Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete .. T 121M-l 2A

T 140-97 (2005) Compressive Strength of Concrete Using Portions of Beams Broken in Flexure T 140-1 . 2A

T 141-05 Sampling Freshly Mixed Concrete T 141-1 .. 2A

T 148-07 Measuring Length of Drilled Concrete Cores T 148-1 .. 2A

T 152-05 Air Content of Freshly Mixed Concrete by the Pressure Method T 152-1 . 2A

T 155-08 Water Retention by Liquid Membrane-Forming Curing Compounds for T 155-1 2A Concrete .

T 157-06 Air-Entraining Admixtures for Concrete T 157-1 . 2A

T 158-05 Bleeding of Concrete T 158-1 . 2A

T 160-97 (2005) Length Change ofHardened Hydraulic Cement Mortar and Concrete T 160-1 .. 2A

T 161-08 Resistance of Concrete to Rapid Freezing and Thawing T 161-1 . 2A

T 177-03 Flexural Strength ofConcrete (Using Simple Beam with Center-Point Loading) T 177-1 . 2A

T 178-97 (2005) Cement Content of Hardened Portland Cement Concrete T 178-1 .. 2A

T 196M/T 196-05 Air Content of Freshly Mixed Concrete by the Volumetric Method T 196M-l .. 2A

T 197M/T 197-08 Time of Setting of Concrete Mixtures by Penetration Resistance T 197M-l .. 2A

T 198-02 (2006) Splitting Tensile Strength of Cylindrical Concrete Specimens T 198-1 .. 2A

T 199-00 (2006) Air Content of Freshly Mixed Concrete by the Chace Indicator T 199-1 .. 2A

T 231-05 Capping Cylindrical Concrete Specimens T 231-1 .. 2B

T 253-02 Coated Dowel Bars T 253-1 .. 2B

T 259-02 (2006) Resistance of Concrete to Chloride Ion Penetration T 259-1 .. 2B

T 260-97 (2005) Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials T 260-1 2B

T 271-83 (2004) Density of Plastic and Hardened Portland Cement Concrete In-Place .by Nuclear Methods T 271-1 2B

xiv

Volume Number B T 276-97 (2005)

T 277-07

T 285-89 (2005)

T 299-93 (2004)

T 303-00 (2004)

T 309Mrr 309-06

T 318-02 (2007)

T 325-04

T 332-07

T 334-08

Title Page Volume

Developing Early-Age Compression Test Values and Projecting Later-Age Strengths T 276-1 . 2B

Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration T 277-1 . 2B

Bend Test for Bars for Concrete Reinforcement T 285-1 .. 2B

Rapid Identification of Alkali-Silica Reaction Products in Concrete

T 299-1 .

2B

Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction T 303-1 2B

Temperature of Freshly Mixed Hydraulic Cement Concrete T 309M/ T 309-1

2B

Water Content of Freshly Mixed Concrete Using Microwave Oven Drying............ T 318-1 2B

Estimating the Strength of Concrete in Transportation Construction by Maturity Tests T 325-1 2B

Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe T 332-1 2B

Estimating the Cracking Tendency of Concrete T 334-1 2B

HYDRAULIC CEMENT

T 98-99 (2004)

T 105-08

T 106M/T 106-07

T 107-07

T 127-04

T 129-06

T 131-08

T 132-87 (2004)

T 133-98 (2006)

T 137-04

T 153-07

T 154-06

T 162-08

T 185-08

T 186-07

T 188-05

T 192-99 (2007)

T 323-03 (2007)

•

Fineness of Portland Cement by the Turbidimeter. .. T 98-1 2A

Chemical Analysis of Hydraulic Cement.. . T 105-1 2A

Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens) . T 106M/ 2A

T 106-1

Autoclave Expansion of Hydraulic Cement. . T 107-1 2A

Sampling and Amount of Testing of Hydraulic Cement.. .. T 127-1 2A

Normal Consistency of Hydraulic Cement . T 129-1 2A

Time of Setting of Hydraulic Cement by Vicat Needle . T 131-1 2A

Tensile Strength of Hydraulic Cement Mortars .. T 132-1 2A

Density of Hydraulic Cement. . T 133-1 2A

Air Content of Hydraulic Cement Mortar .. T 137-1 2A

Fineness of Hydraulic Cement by Air Permeability Apparatus . T 153-1 2A

Time of Setting of Hydraulic Cement by Gillmore Needles . T 154-1 2A

Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency .. T 162-1 2A

Early Stiffening of Portland Cement (Mortar Method) .. T 185-1 2A

Early Stiffening of Hydraulic Cement (Paste Method) .. T 186-1 2A

Evaluation by Freezing and Thawing of Air-Entraining Additions to Hydraulic Cement . T 188-1 2A

Fineness of Hydraulic Cement by the 45-llm (No. 325) Sieve . T 192-1 2A

Determining the Shear Strength at the Interface of Bonded Layers of Portland Cement Concrete . T 323-1 2B

xv

=

Number Title Page

JOINT FILLER AND ASPHALT PLANK

T 42-0 I (2005) Preformed Expansion Joint Filler for Concrete Construction T 42-1 2A

METALLIC MATERIALS FOR BRIDGES

T 65M/T 65-08 Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc- T65M/ Al10y Coatings ............................................................................................. T 65-1 2A

T 68-05 Tension Testing of Metal1ic Materials ......................................................... T 68-1 2A

T 68M-05 Tension Testing of Metal1ic Materials [Metric] .......................................... T 68M-I 2A

T 70-08

T 80-08

Brinel1 Hardness of Metal1ic Materials ........................................................

Rockwel1 Hardness and Rockwel1 Superficial Hardness of Metal1ic Materials ........................................................................................

T 70-1

T 80-1

2A

2A

.j !

T 213M/T 213-08 Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles ...... T 213M/ T213-1

2B

T 243M!T 243-08 Sample Procedure for Impact Testing of Structural Steel ............................ T 243M! 2B T 243-1

T 244-08 Mechanical Testing of Steel Products .......................................................... T 244-1 2B

T 266-08 Notched Bar Impact Testing of Metal1ic Materials (CVN) ......................... T 266-1 2B

MISCELLANEOUS

T 67-08 Standard Practices for Force Verification of Testing Machines ................... T 67-1 2A

T 143-04 Sampling and Testing Calcium Chloride for Roads and Structural Applications................................................................................. T 143-1 2A

T 256-01 (2006) Pavement Deflection Measurements ............................................................ T 256-1 2B

T 257-96 (2004) Instrumental Photometric Measurements of Retroflective Materials and Retroflective Devices ............................................................................ T 257-1 2B

PAINTING AND TRAFFIC MARKING AND SIGNING

T 237-05 Testing Epoxy Resin Adhesive T 237-1 2B

T 250-05 Thermoplastic Traffic Line Material............................................................ T 250-1 2B

T 333-07 Linear Coefficient of Shrinkage on Cure of Adhesive Systems T 333-1 2B

PAVEMENT SURFACE CHARACTERISTICS

T 242-96 (2004) Frictional Properties of Paved Surfaces Using a Ful1-Scale Tire T 242-1 2B

T 278-90 (2007) Surface Frictional Properties Using the British Pendulum Tester T 278-1 2B

T 282-01 (2006) Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level) T 282-1 2B

T 317-04 Prediction of Asphalt-Bound Pavement Layer Temperatures T 3I7- I 2B

SOILS AND STABILIZATION

T 87-86 (2004) Dry Preparation of Disturbed Soil and Soil Aggregate Samples -for Test T 87-1 2A

T 88-00 (2004) Particle Size Analysis of Soils T 88-1 2A

XVI

~olume Number

T 89-02 (2006)

T 90-00 (2004)

T 92-97 (2005)

T 99-01 (2004)

T 100-06

T 134-05

T 135-97 (2005)

T 136-97 (2005)

T 146-96 (2004)

T 176-08

T 180-01 (2004)

T 190-02 (2006)

T 191-02 (2006)

T 193-99 (2007)

T 194-97 (2004)

T 206-03 (2007)

T 207-03 (2007)

T 208-05

T 211-90 (2004)

T 215-70 (2007)

T 216-07

T 217-02 (2006)

T 218-86 (2004)

T 219-87 (2004)

T 220-66 (2004)

T 221-90 (2004)

T 222-81 (2004)

T 223-96 (2004)

T 224-01 (2004)

T 225-06

T 226-90 (2004)

T 232-90 (2004)·

Title

Determining the Liquid Limit of Soils

Determining the Plastic Limit and Plasticity Index of Soils

Determining the Shrinkage Factors of Soils

Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop

Specific Gravity of Soils

Moisture-Density Relations of Soil-Cement Mixtures

Wetting-and-Drying Test of Compacted Soil-Cement Mixtures

Freezing-and-Thawing Tests of Compacted Soil-Cement Mixtures

Wet Preparation of Disturbed Soil Samples for Test...

Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test.

Moisture-Density Relations of Soils Using a 4.54-kg (I O-Ib) Rammer and a 457-mm (18-in.) Drop

Resistance R-Value and Expansion Pressure of Compacted Soils

Density of Soil In-Place by the Sand-Cone Method

The California Bearing Ratio

Determination of Organic Matter in Soils by Wet Combustion

Penetration Test and Split-Barrel Sampling of Soils

Thin-Walled Tube Sampling of Soils

Unconfined Compressive Strength of Cohesive Soil

Determination of Cement Content in Cement-Treated Aggregate by the Method of Titration

Permeability of Granular Soils (Constant Head)

One-Dimensional Consolidation Properties of Soils

Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester

Sampling Hydrated Lime

Testing Lime for Chemical Constituents and Particle Sizes

Determination of the Strength of Soil-Lime Mixtures

Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements....................

Nonrepetitive Static Plate Load Test of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements

Field Vane Shear Test in Cohesive Soil

Correction for Coarse Particles in the Soil Compaction Test..

Diamond Core Drilling for Site Investigation

Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements

Determination of Lime Content in Lime-Treated Soils by Titration

XVll

Page Volume

.. T 89-1 2A

T 90-1. 2A

T 92-1. 2A

T 99-1. 2A

T 100-1 . 2A

T 134-1 . 2A

.. T 135-1 2A

.. T 136-1 2A

.. T 146-1 2A

T 176-1 . 2A

T 180-1. 2A

.. T 190-1 2A

.. T 191-1 2A

T 193-1 . 2A

T 194-1 . 2A

.. T 206-1 2A

T 207-1 . 2A

.. T 208-1 2A

T 211-1 . 2B

T 215-1 . 2B

T 216-1 . 2B

T217-1. 2B

T 218-1 . 2B

T 219-1 . 2B

.. T 220-1 2B

T 221-1 2B

T 222-1 . 2B

.. T 223-1 2B

.. T 224-1 2B

.. T 225-1 2B

T 226-1 . 2B

.. T 232-1 2B

Number Title Page Volume·

T 233-02 (2006) Density of Soil In-Place by Block, Chunk, or Core Sampling . T233-1 2B

T 235-96 (2004) Bearing Capacity of Soil for Static Load on Spread Footings . T 235-1 2B

T 236-08 Direct Shear Test of Soils Under Consolidated Drained Conditions .. T 236-1 2B

T 252-96 (2004) Measurements of Pore Pressures in Soils .. T 252-1 2B

T 258-81 (2004) Determining Expansive Soils . T 258-1 2B

T 265-93 (2004) Laboratory Determination of Moisture Content of Soils .. T 265-1 2B

T 267-86 (2004) Determination of Organic Content in Soils by Loss on Ignition .. T 267-1 2B

T 272-04 Family of Curves-One-Point Method . T 272-1 2B

T 273-86 (2004) Soil Suction .. T 273-1 2B

T 288-91 (2004) Determining Minimum Laboratory Soil Resistivity . T 288-1 2B

T 289-91 (2004) Determining pH of Soil for Use in Corrosion Testing . T 289-1 2B

T 290-95 (2007) Determining Water-Soluble Sulfate Ion Content in Soil . T 290-1 2B

T 291-94 (2004) Determining Water-Soluble Chloride Ion Content in Soil .. T 291-1 2B

T 296-05 Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression .. T 296-1 2B

T 297-94 (2004) Consolidated, Undrained Triaxial Compression Test on Cohesive Soils .. T 297-1 2B

T 298-99 (2006) High-Strain Dynamic Testing of Piles .. T 298-1 2B

T 306-98 (2006) Progressing Auger Borings for Geotechnical Explorations . T 306-1 2B

T 307-99 (2007) Determining the Resilient Modulus of Soils and Aggregate Materials . T 307-1 2B

T 310-06 In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) .. T 310-1 2B

T 311-00 (2004) Grain-Size Analysis of Granular Soil Materials . T311-1 2B

DELETED SPECIFICATIONS

The following specification has been deleted from the 28th Edition:

T 182 Coating and Stripping of Bitumen-Aggregate Mixtures

The following specifications have been moved to Part I of the 28th Edition:

T 254-80 (2004) Installing, Monitoring, and Processing Data of the Traveling Type Slope Inclinometer

T 328-05 Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size

•

XV1ll

)Iume PART II TESTS

Table of Contents

NUMERICAL SEQUENCE

Number Title Page Volume

T 2-91 (2006) Sampling of Aggregates . T 2-1 2A

T 11-05 Materials Finer Than 75-~m (No. 200) Sieve in Mineral Aggregates by Washing . T 11-1 2A

T 19M/T 19-00 Bulk Density ("Unit Weight") and Voids in Aggregate . T 19/T 19M-I 2A (2004)

T 21-05 Organic Impurities in Fine Aggregates for Concrete .. T 21-1 2A

T 22-07 Compressive Strength of Cylindrical Concrete Specimens .. T 22-1 2A

T 23-08 Making and Curing Concrete Test Specimens in the Field .. T 23-1 2A

T 24M/T 24-07 Obtaining and Testing Drilled Cores and Sawed Beams of Concrete . T 24M/T 24-1 2A

T 26-79 (2004) Quality of Water to Be Used in Concrete .. T 26-1 2A

T 27-06 Sieve Analysis of Fine and Coarse Aggregates .. T 27-1 2A

T 30-08 Mechanical Analysis of Extracted Aggregate .. T 30-1 2A

T 32-08 Sampling and Testing Brick .. T 32-1 2A

T 37-07 Sieve Analysis of Mineral Filler for Hot Mix Asphalt . T 37-1 2A

T 40-02 (2006) Sampling Bituminous Materials . T 40-1 2A

T 42-01 (2005) Prefonned Expansion Joint Filler for Concrete Construction .. T 42-1 2A

T 44-03 (2007) Solubility of Bituminous Materials . T 44-1 2A

T 48-06 Flash and Fire Points by Cleveland Open Cup . T 48-1 2A

T 49-07 Penetration of Bituminous Materials . T 49-1 2A

T 50-99 (2003) Float Test for Bituminous Materials .. T 50-1 2A

T 51-08 Ductility of Bituminous Materials . T 51-1 2A

T 53-08 Softening Point of Bitumen (Ring-and-Ball Apparatus) .. T 53-1 2A

T 55-02 (2006) Water in Petroleum Products and Bituminous Materials by T 55-1 2A Distillation .

T 59-08 Testing Emulsified Asphalts .. T 59-1 2A

T 65M/T 65-08 Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings . T 65M/T 65-1 2A

T 67-08 Standard Practices for Force Verification of Testing Machines . T 67-1 2A

T 68-05 Tension Testing of Metallic Materials .. T 68-1 2A

T 68M-05 Tension Testing of Metallic Materials [Metric] . T 68M-I 2A .. T 70-08 Brinell Hardness of Metallic Materials . T 70-1 2A

xix

-------------------­

Number Title Page Volume

T 71-08 Effect ofOrganic Impurities in Fine Aggregate on Strength of Mortar. .. T 71-1 2A

T 72-97 (2005)

T 78-05

T 79-96 (2004)

T 80-08

T 84-08

T 85-08

T 87-86 (2004)

T 88-00 (2004)

T 89-02 (2006)

T 90-00 (2004)

T 92-97 (2005)

T 96-02 (2006)

T 97-03

T 98-99 (2004)

T 99-01 (2004)

T 100-06

T 102-83 (2004)

T 103-08

T 104-99 (2007)

T 105-08

T 106M/ T 106-07

T 107-07

T 110-03 (2007)

T 111-83 (2004)

T 112-00 (2004)

T 113-06

Saybolt Viscosity .

Distillation of Cutback Asphaltic (Bituminous) Products .

Flash Point with Tag Open-Cup Apparatus for Use with Material Having a Flash Less Than 93.3°C (200°F) .

Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials .

Specific Gravity and Absorption of Fine Aggregate ..

Specific Gravity and Absorption of Coarse Aggregate .

Dry Preparation of Disturbed Soil and Soil Aggregate Samples for Test .

Particle Size Analysis of Soils ..

Detennining the Liquid Limit of Soils ..

Detennining the Plastic Limit and Plasticity Index of Soils ..

Detennining the Shrinkage Factors of Soils .

Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine .

Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) .

Fineness of Portland Cement by the Turbidimeter ..

Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop ..

Specific Gravity of Soils .

Spot Test of Asphaltic Materials ..

Soundness of Aggregates by Freezing and Thawing ..

Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate ..

Chemical Analysis of Hydraulic Cement.. .

Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in. Cube Specimens) .

Autoclave Expansion of Hydraulic Cement.. .

Moisture or Volatile Distillates in Hot Mix Asphalt (HMA) ..

Inorganic Matter or Ash in Bituminous Materials .

Clay Lumps and Friable Particles in Aggregate .

Lightweight Pieces in Aggregate ..

•

xx

T 72-1 2A

T 78-1 2A

T 79-1 2A

T 80-1 2A

T 84-1 2A

T 85-1 2A

T 87-1 2A

T 88-1 2A

T 89-1 2A

T 90-1 2A

T 92-1 2A

T 96-1 2A

T 97-1 2A

T 98-1 2A

T 99-1 2A

T 100-1 2A

T 102-1 2A

T 103-1 2A

T 104-1 2A

T 105-1 2A

T 106M/ 2A T 106-1

T 107-1 2A

T 110-1 2A

T 111-1 2A

T 112-1 2A

T 113-1 2A

me Number

T 119M/ T 119-07

T 121M! T 121-05

T 127-04

T 129-06

T 131-08

T 132-87 (2004)

T 133-98 (2006)

T 134-05

T 135-97 (2005)

T 136-97 (2005)

T 137-04

T 140-97 (2005)

T 141-05

T 143-04

T 146-96 (2004)

T 148-07

T 152-05

T 153-07

T 154-06

T 155-08

T 157-06

T 158-05

T 160-97 (2005)

T 161-08

T 162-08

T 164-08

T 165-02 (2006)

T 166-07

T 167-05

Title Page Volume

Slump of Hydraulic Cement Concrete ..................................................... T 119M/ 2A T 119-1

Denisty (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete ................................................................................................... T 121M-1 2A

Sampling and Amount of Testing of Hydraulic Cement.. ........................ T 127-1 2A

Normal Consistency of Hydraulic Cement .............................................. T 129-1 2A

Time of Setting of Hydraulic Cement by Vicat Needle ........................... T 131-1 2A

Tensile Strength of Hydraulic Cement Mortars ....................................... T 132-1 2A

Density of Hydraulic Cement. .................................................................. T 133-1 2A

Moisture-Density Relations of Soil-Cement Mixtures ............................. T 134-1 2A

Wetting-and-Drying Test of Compacted Soil-Cement Mixtures ............. T 135-1 2A

Freezing-and-Thawing Tests of Compacted Soil-Cement Mixtures ........ T 136-1 2A

Air Content of Hydraulic Cement Mortar ................................................ T 137-1 2A

Compressive Strength of Concrete Using Portions of Beams Broken in Flexure ................................................................................................. T 140-1 2A

Sampling Freshly Mixed Concrete ........................................................... T 141-1 2A

Sampling and Testing Calcium Chloride for Roads and Structural Applications............ ,................................................................ T 143-1 2A

Wet Preparation of Disturbed Soil Samples for Test ............................... T 146-1 2A

Measuring Length of Drilled Concrete Cores .......................................... T 148-1 2A

Air Content of Freshly Mixed Concrete by the Pressure Method ............ T 152-1 2A

Fineness of Hydraulic Cement by Air Permeability Apparatus ............... T 153-1 2A

Time of Setting of Hydraulic Cement by Gillmore Needles .................... T 154-1 2A

Water Retention by Liquid Membrane-Forming Curing Compounds T 155-1 2A for Concrete .............................................................................................

Air-Entraining Admixtures for Concrete ................................................. T 157-1 2A

Bleeding of Concrete................................................................................ T 158-1 2A

Length Change of Hardened Hydraulic Cement Mortar and Concrete .... T 160-1 2A

Resistance of Concrete to Rapid Freezing and Thawing.......................... T 161-1 2A

Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency .................................................................................. T 162-1 2A

Quantitative Extraction Asphalt Binder from Hot Mix Asphalt (HMA) .. T 164-1 2A

Effect of Water on Cohesion of Compacted Bituminous Mixtures.......... T 165-1 2A

Bulk Specific Gravity of Compacted Hot Mix Asphalt Mixtures Using Saturated Surface-Dry Specimens ................................................. T 166-1 2A

Compressive Strength of Hot Mix Asphalt.. ............................................ T 167-1 2A

•

xxi

Number Title Page Volume

T 168-03 (2007)

T 170-00 (2005)

T 176-08

T 177-03

T 178-97 (2005)

T 179-05

T 180-01 (2004)

T 185-08

T 186-07

T 188-05

T 190-02 (2006)

T 191-02 (2006)

T 192-99 (2007)

T 193-99 (2007)

T 194-97 (2004)

T 195-67 (2007)

T 196M! T 196-05

T 197M! T 197-08

T 198-02 (2006)

T 199-00 (2006)

T 200-79 (2006)

T 201-03 (2007)

T 202-03 (2007)

T 206-03 (2007)

T 207-03 (2007)

T 208-05

T 209-08

T 210-05

Sampling Hot Mix Asphalt Paving Mixtures

Recovery of Asphalt from Solution by Abson Method

Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test

Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading)

Cement Content of Hardened Portland Cement Concrete

Effect of Heat and Air on Asphalt Materials (Thin-Film Oven Test) .....

Moisture-Density Relations of Soils Using a 4.54-kg (lO-lb) Rammer and a 457-mm (l8-in.) Drop

Early Stiffening of Portland Cement (Mortar Method)

Early Stiffening of Hydraulic Cement (Paste Method)

Evaluation by Freezing and Thawing of Air-Entraining Additions to Hydraulic Cement

Resistance R-Value and Expansion Pressure of Compacted Soils...........

Density of Soil In-Place by the Sand-Cone Method

Fineness of Hydraulic Cement by the 45-!J.m (No. 325) Sieve

The California Bearing Ratio

Determination of Organic Matter in Soils by Wet Combustion...............

Determining Degree of Particle Coating of Asphalt Mixtures

Air Content of Freshly Mixed Concrete by the Volumetric Method........

Time of Setting of Concrete Mixtures by Penetration Resistance............

Splitting Tensile Strength of Cylindrical Concrete Specimens

Air Content of Freshly Mixed Concrete by the Chace Indicator..............

pH of Aqueous Solutions with the Glass Electrode

Kinematic Viscosity of Asphalts (Bitumens)

Viscosity of Asphalts by Vacuum Capillary Viscometer

Penetration Test and Split-Barrel Sampling of Soils

Thin-Walled Tube Sampling of Soils

Unconfined Compressive Strength of Cohesive Soil

Theoretical Maximum Specific Gravity and Density of Hot Mix Asphalt (HMA)

Aggregate Durability Index......................................................................

•

xxii

T 168-1

T 170-1

T 176-1

T 177-1

T 178-1

T 179-1

T 180-1

T 185-1

T 186-1

T 188-1

T 190-1

T 191-1

T 192-1

T 193-1

T 194-1

T 195-1

T 196M! T 196-1

T 197M! T 197-1

T 198-1

T 199-1

T 200-1

T 201-1

T 202-1

T 206-1

T 207-1

T 208-1

T 209-1

T 210-1

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

2A

)Iume ~,t ' Number Title Page Volume

T 211-90 (2004) Determination of Cement Content in Cement-Treated Aggregate by the Method of Titration ....................................................................... T211-1 2B

T 213M/ Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles .. T 2l3M/ 2B T213-08 T213-1

T 215-70 (2007) Permeability of Granular Soils (Constant Head) ..................................... T 215-1 2B

T 216-07 One-Dimensional Consolidation Properties of Soils ................................ T 216-1 2B

T 217-02 (2006) Determination of Moisture in Soils by Means of a Calcium Carbide Gas Pressure Moisture Tester ................................................................... T 217-1 2B

T 218-86 (2004) Sampling Hydrated Lime ......................................................................... T 218-1 2B

T 219-87 (2004) Testing Lime for Chemical Constituents and Particle Sizes .................... T 219-1 2B

T 220-66 (2004) Determination of the Strength of Soil-Lime Mixtures ............................. T 220-1 2B

T 221-90 (2004) Repetitive Static Plate Load Test of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements ................................................................................. T 221-1 2B

T 222-81 (2004) Non-Repetitive Static Plate Load Test of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements ................................................................................. T 222-1 2B

T 223-96 (2004) Field Vane Shear Test in Cohesive SoiL................................................ T 223-1 2B

T 224-01 (2004) Correction for Coarse Particles in the Soil Compaction Test.. ................. T 224-1 2B

T 225-06 Diamond Core Drilling for Site Investigation .......................................... T 225-1 2B

T 226-90 (2004) Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements...................................................... T 226-1 2B

T 227-02 (2006) Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method ........ T227-1 2B

T 228-06 Specific Gravity of Semi-Solid Bituminous Materials ............................. T 228-1 2B

T 231-05 Capping Cylindrical Concrete Specimens................................................ T 231-1 2B

T 232-90 (2004) Determination of Lime Content in Lime-Treated Soils by Titration........ T 232-1 2B

T 233-02 (2006) Density of Soil In-Place by Block, Chunk, or Core Sampling ................. T 233-1 2B

T 235-96 (2004) Bearing Capacity of Soil for Static Load on Spread Footings ................. T 235-1 2B

T 236-08 Direct Shear Test of Soils Under Consolidated Drained Conditions ....... T 236-1 2B

T 237-05 Testing Epoxy Resin Adhesive ................................................................ T 237-1 2B

T 240-08 Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) ....................................................................................... T 240-1 2B

T 241-95 (2004) Helical Continuously Welded Seam Corrugated Steel Pipe ..................... T 241-1 2B

T 242-96 (2004) Frictional Properties of Paved Surfaces Using a Full-Scale Tire ............. T 242-1 2B

T 243M/ Sampling Procedure for Impact Testing of Structural T 243M/ 2B T 243-08 Stee1. ......................................................................................................... T 243-1

T 244-08 •Mechanical Testing of Steel Products ...................................................... T 244-1 2B

XXlll

Number

T 245-97 (2004)

T 246-07

T 247-02 (2006)

T 248-02 (2006)

T 249-03 (2007)

T 250-05

T 252-96 (2004)

T 253-02

T 255-00 (2004)

T 256-01 (2006)

T 257-96 (2004)

T 258-81 (2004)

T 259-02 (2006)

T 260-97 (2005)

T 265-93 (2004)

T 266-08

T 267-86 (2004)

T 269-97 (2007)

T 271-83 (2004)

T 272-04

T 273-86 (2004)

T 275-07

T 276-97 (2005)

T 277-07

T 278-90 (2007)

T 279-96 (2006)

T 280-06

T 281-06

Title

Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus

Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus

Preparation of Test Specimens of Bituminous Mixtures by Means of California Kneading Compactor

Reducing Samples of Aggregate to Testing Size

Helical Lock Seam Corrugated Pipe

Thermoplastic Traffic Line Material

Measurements of Pore Pressures in Soils

Coated Dowel Bars

Total Evaporable Moisture Content of Aggregate by Drying

Pavement Deflection Measurements

Instrumental Photometric Measurements of Retroreflective Materials and Retroreflective Devices

Determining Expansive Soils

Resistance of Concrete to Chloride Ion Penetration

Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials

Laboratory Determination of Moisture Content of Soils

Notched Bar Impact Testing of Metallic Materials (CVN)

Determination of Organic Content in Soils by Loss on Ignition

Percent Air Voids in Compacted Dense and Open Asphalt Mixtures

Density of Plastic and Hardened Portland Cement Concrete In-Place by Nuclear Methods

Family of Curves-One-Point Method

Soil Suction

Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens

Developing Early-Age Compression Test Values and Projecting Later-Age Strengths

Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration

Surface Frictional Properties Using the British Pendulum Tester..

Accelerated Polishing of Aggregates Using the British Wheel...

Concrete Pipe, Manhole Sections, or Tile

.vitrified Clay Pipe

XXIV

Page Volume

. T 245-1 2B

. T 246-1 2B

. T 247-1 2B

.. T 248-1 2B

.. T 249-1 2B

.. T 250-1 2B

. T 252-1 2B

. T 253-1 2B

. T255-l 2B

. T 256-1 2B

. T257-l 2B

.. T 258-1 2B

. T 259-1 2B

.. T 260-1 2B

. T 265-1 2B

. T 266-1 2B

.. T 267-1 2B

.. T 269-1 2B

. T 271-1 2B

. T 272-1 2B

. T 273-1 2B

.. T275-l 2B

. T 276-1 2B

. T 277-1 2B

.. T 278-1 2B

.. T 279-1 2B

. T 280-1 2B

. T 281-1 2B

ume

T 282-01 (2006)

T 285-89 (2005)

T 288-91 (2004)

T 289-91 (2004)

T 290-95 (2007)

T 291-94 (2004)

T 295-08

T 283-07

T 287-06

T 296-05

T 297-94 (2004)

T 298-99 (2006)

T 299-93 (2004)

T 300-00 (2004)

T 301-08

T 302-05

T 303-00 (2004)

T 304-08

T 305-97 (2005)

T 306-98 (2006)

T 307-99 (2007)

T 308-08

T 309M/ T 309-06

T 310-06

T 311-00 (2004)

Title Page Volume

Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level) .............................................................................. T 282-1 2B

Resistance of Compacted Hot Mix Asphalt (HMA) to Moisture-Induced Damage ...................................................................................... T 283-1 2B

Bend Test for Bars for Concrete Reinforcement.. .................................... T 285-1 2B

Asphalt Binder Content of Asphalt Mixtures by the Nuclear Method ..... T 287-1 2B

Determining Minimum Laboratory Soil Resistivity................................. T 288-1 2B

Determining pH of Soil for Use in Corrosion Testing ............................. T 289-1 2B

Determining Water-Soluble Sulfate Ion Content in SoiL....................... T 290-1 2B

Determining Water-Soluble Chloride Ion Content in Soil ....................... T 291-1 2B

Specific Gravity or API Gravity of Liquid Asphalts by Hydrometer Method ................................................................................. T 295-1 2B

Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression ........................................................................... T 296-1 2B

Consolidated, Undrained Triaxial Compression Test on Cohesive T 297-1 2B Soils..........................................................................................................

High-Strain Dynamic Testing of Piles ..................................................... T 298-1 2B

Rapid Identification of Alkali-Silica Reaction Products in Concrete....... T 299-1 2B

Force Ductility Test of Asphalt Materials ................................................ T 300-1 2B

Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer.......................................................................................... T 301-1 2B

Polymer Content of Polymer-Modified Emulsified Asphalt Residue T 302-1 2B and Asphalt Binders .................................................................................

Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction .......................................................... T 303-1 2B

Uncompacted Void Content of Fine Aggregate ....................................... T 304-1 2B

Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures ..................................................................................... T 305-1 2B

Progressing Auger Borings for Geotechnical Explorations ..................... T 306-1 2B

Determining the Resilient Modulus of Soils and Aggregate Materials .... T 307-1 2B

Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method............................................................................. T 308-1 2B

Temperature of Freshly Mixed Hydraulic Cement Concrete ................... T 309M/ 2B T 309-1

In-Place Density and Moisture Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth) ..................................................... T 310-1 2B

Grain-Size Analysis of Granular Soil Materials ....................................... T311-1 2B

•

xxv

- - ~ _. --=~---=====~===~~IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII_-

Number Title Page

T 312-08 Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor T 312-1 2B

T 313-08 Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) T 313-1 2B

T 314-07 Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) T 314-1 2B

T 315-08 Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) T 315-1 2B

T 316-06 Viscosity Determination of Asphalt Binder Using Rotational T 316-1 2B Viscometer .

T 317-04 Prediction of Asphalt-Bound Pavement Layer Temperatures T 317-1 2B

T 318-02 (2007) Water Content of Freshly Mixed Concrete Using Microwave Oven Drying T 318-1 2B

T 319-08 Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures T 319-1 2B

T 320-07 Determining the Permanent Shear Strain and Stiffness of Asphalt Mixtures Using the Superpave Shear Tester (SST) T 320-1 2B

T 321-07 Determining the Fatigue Life of Compacted Hot Mix Asphalt (HMA) Subjected to Repeated Flexural Bending T 321-1 2B

T 322-07 Determining the Creep Compliance and Strength of Hot Mix Asphalt (HMA) Using the Indirect Tensile Test Device T 322-1 2B

T 323-03 (2007) Determining the Shear Strength at the Interface of Bonded Layers of Portland Cement Concrete T 323-1 2B

T 324-04 Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt (HMA) T 324-1 2B

T 325-04 Estimating the Strength of Concrete in Transportation Construction by Maturity Tests T 325-1 2B

T 326-05 Uncompacted Void Content of Coarse Aggregate (As Influenced by Particle Shape, Surface Texture, and Grading) T 326-1 2B

T 327-06 Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus T 327-1 2B

T 329-08 Moisture Content of Hot Mix Asphalt (HMA) by Oven Method T 329-1 2B

T 330-07 The Qualitative Detection of Harmful Clays of the Smectite Group in Aggregates Using Methylene Blue T 330-1 2B

T 331-08 Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method T 331-1 2B

T 332-07 Determining Chloride Ions in Concrete and Concrete Materials by Specific Ion Probe T 332-1 2B

T 333-07 Linear Coefficient of Shrinkage on Cure of Adhesive Systems T 333-1 2B

T 334-08 i:stimating the Cracking Tendency of Concrete T 334-1 2B

xxvi

Volume

28

28

28

28

28

2B

~8

8

DELETED SPECIFICATIONS

The following specification has been deleted from the 28th Edition:

T 182-84 (2002) Coating and Stripping of Bitumen-Aggregate Mixtures

The following specifications have been moved to Part I of the 28th Edition:

T 254-80 (2004) Installing, Monitoring, and Processing Data of the Traveling Type Slope Inclinometer

T 328-05 Reducing Samples of Hot Mix Asphalt to Testing Size

•

XXVll