Table of Contents - Control Management, Inc. | …€¦ · schedules and three timer inputs •...

www.usa.siemens.com/hvac

Variable Frequency Drives

C-1


PRODUCT PRODUCT CODE RESOURCE DOCUMENTS PAGE #


Introduction C-3

BT300 HVAC Drives BT300 154-126 C-5

BT300 HVAC Drives with Bypass Options BT300 C-15

Legacy SED2 Variable Frequency Drives SED2 154-042 C-19

Legacy SED2 Variable Frequency Drives with Bypass Options SED2 154-044, 154-041 C-23

Legacy SED2 Variable Frequency Drives SED2 154-062 C-29 NEMA Type 3R & Type 3R Harsh Environment Bypass

Accessories & Service Kits C-35

Table of Contents

NEW!

NEW!

Varia

ble

Freq

uenc

y D

rives


C-2



C-3


Siemens, a global leader in drives technology, is raising the bar with new BT300 Variable frequency Drives that are designed specifically for the demands of today’s HVAC systems. Increased focus on energy efficiency of variable flow systems has increased the need for easy-to-use and highly reliable variable frequency drives that reduce the cost of installation and maintenance while maximizing energy savings. Siemens Industry’s BT300 HVAC drives are designed to meet the demands of today’s HVAC systems. An increased focus on energy efficiency of variable flow systems has increased the need for easy-to-use and highly reliable variable frequency drives that reduce the cost of installation and maintenance while maximizing energy savings.

While constantly expected to do more with less, managing energy consumption and optimizing occupant comfort remains of utmost importance to facility managers. They also require products that will integrate seamlessly into existing equipment and building management systems. The highly efficient BT300 delivers all this and more.

The BT300 comes standard with unique and industry-leading features:

• View/Monitor nine parameters at one time – user selectable, users determine the parameters for their applications

• Thin Film Capacitors – eliminate the need to condition or reform the capacitors before applying power

• Smallest Type 12 footprint on the market – lower shipping cost and easy installation

• Motor Switch Ride Through – during maintenance the motor maintenance switch can be opened and closed without stopping or tripping the drive

Introduction

Varia

ble

Freq

uenc

y D

rives


C-4

Our customer support teams are accessible and happy to assist you with ordering, fulfillment, and shipping questions. Call a representative at 1-800-516-9964 from 7 am to 5:30 pm (CST) Monday through Friday.

Contact Customer Support or your Account Executive with any questions. We appreciate your business and look forward to helping you!

We’re happy to assist you



C-5DescriptionSiemens Industry’s BT300 HVAC drives are designed to meet the demands of today’s HVAC systems. An increased focus on energy efficient variable flow systems has increased the need for easy-to-use and highly reliable variable frequency drives that reduce the cost of installation and maintenance while maximizing energy savings. HVAC demands are unique to other drive applications.

Features• Motor Switch Ride Through – during maintenance

the motor maintenance switch can be opened and closed without stopping or tripping the drive

• Thin Film Capacitors – eliminate the need to condition or reform the capacitors before applying power

• Intuitive graphical keypad with multilingual display• Monitor nine user-defined values at one time• Built-in wizards for faster start-up and easy setup of

advanced functions

• Built-in plain text help and maintenance manual shows possible causes and suggested remedies

• Real time clock allows up to five calendar-based schedules and three timer inputs

• Ready to communicate to a Building Management System, embedded RS485 and Ethernet HVAC protocols: BACnet IP, Modbus TCP, Modbus RTU, BACnet MSTP, Metasys N2, APOGEE® FLN

• Two built-in PID controllers enable fast and accurate process control

• Integrated harmonic filters on the DC link reduce noise and interference and eliminate the need for additional filters and reactors

• Built in fire mode controller• Energy Savings with > 97.5% efficiency• Optimized cooling fan runs only when needed• Belt failure detection with or without an external sensor

• Accepts a wide variety of digital and analog I/O types, including direct Ni 1000 RTD sensor level inputs

• One common interface throughout all power ranges • Two form C relays • RoHS Compliant • Smallest Type 12 footprint on the market – lower

shipping cost and easy installation

Options• LON Interface • Flange Mounting Kits for Frame Sizes 4-7

• Varnished I/O Option Boards• Door Mounting Kits

• PC Cable for NET Tool, USB to RS-485, cable length 9.8 ft. (3 m)• Real Time Clock Battery Package• SED2 to BT300 Migration Kits

BT300 Variable Frequency Drives

Energy &Atmosphere

BT300

Important Note: VFD products are only available through authorized distribution channels. To locate an authorized distributor, please contact a Siemens Building Technologies representative at: 1.800.516.9964. BT300 Variable Frequency Drives

without and with Integral Disconnect.

Varia

ble

Freq

uenc

y D

rives


C-6

Input Voltage and Power Ranges (3-phase)

208V - 240V, +/-10% ................................. .1 to 125 HP (0.75 to 90 kW) 380V - 480V, +/-10% ...............................1.5 to 250 HP (1.1 to 160 kW) Input Frequency ...................................................................... 45 to 66 HzOutput Frequency ................................................................... 0 to 320 HzFrequency Resolution .................................................................. 0.01 HzPower Factor ........................................................... 0.98 at Nominal LoadEfficiency ...................................................................................... >97.5% Overload Capacity ................. 1.1 x Nominal Rated Output Current 110%

for 1 Minute/10 Minutes

Peak Overload Capacity ............200% for 2 Seconds Every 20 Seconds Switching Frequency ....... 1.5 to 10kHz; Automatic Switching Frequency

Derating in Case of OverheatingShort Circuit Withstand Rating ............................................100,000 AIC Frequency Reference Analog Input .....0.01 Hz Resolution 0.1% (10-bit)Field Weakening Point ........................................................... 8 to 320 HzAcceleration/Deceleration Time ......................................0.1 to 3000 secAmbient Operating Temperature ........................ -14º F (-10º C) no Frost to 104º F (40º C) Without De-rating and 131º F (55º C) With De-ratingStorage Temperature ............................ -40º F (-40º C) to 158º F (70º C)Relative Humidity ............0 to 95% RH, Non-condensing, Non-corrosiveAir Quality ........................................................................ IEC 60068-2-60 Chemical Vapors.................IEC 60721-3-3, Unit in Operation, Class 3C3Mechanical Particles ..........IEC 60721-3-3, Unit in Operation, Class 3S2Altitude ........100% Load Capacity (no De-rating) up to 3,280 ft (1,000 m)

1% De-rating for Each 328 ft (100 m) Above 328 ft (1,000 m)Maximum Altitude 14,763 ft (4,500 m)

Vibration ..............................................IEC 61800-5-1 and IEC 60068-2-6Shock ..............................................IEC 61800-5-1 and IEC 60068-2-27Enclosures ............................................................ UL Type 1, UL Type 12EMC Immunity ..........Fulfills IEC 61800-3, First and Second Environment EMC Emissions...................................................................EN61800-3C2Average Noise level (Cooling Fan) Sound Level in dB(A) .....................FS4 - 65; FS5 - 61; FS6 and FS7: 68

FR8: 77; FR9: 78Agency Approvals .................................................UL 508C; CE, UL, cULAnalog Inputs ..................... 2 Voltage or Current (0-10Vdc, 0/4 to 20 mA)Analog Output ..........................................1 Selectable Voltage or Current Digital Inputs .............................................. 6 Programmable and Isolated Relay Outputs ................................................2 Form C; 1 Normally Open Auxiliary Input Voltage ................................24 Vdc +/-10% 250 mA Max.Auxiliary Input Voltage ...............................24 Vdc +/-10% 250 mA Max.,

Total of Both Outputs Control Method ........................................................Linear, Parabolic and

Programmable V/f; Flux Current Control Low-Power ModePWM Frequency .......... 2k Hz to 16k Hz (Adjustable in 2k Hz Increments)Fixed Frequencies ........................................................15 ProgrammableSkip Frequency Bands ...................................................3 ProgrammableEmbedded Resident Protocols .........................RS485 and Ethernet P1,

BACnet MS/TP, BACnet IP, Modbus RTU, Modbus TCP, Metasys N2, APOGEE FLN

Protection Features ...............Under-voltage and Over-voltage Trip Limit, Ground Fault, Mains Supervision, Motor Phase Supervision,

Over-current, Unit Over-temperature, Motor Overload, Motor Stall, Motor Underload, Short Circuit of +24V and +10V Reference Voltages

BT300 Specifications




C-7

BT300 Product Ordering

Your Product Number

Example Product Number B T 3 0 0 - 0 0 1 X 2 - 0 1 X

Example Product Number B T 3 0 0 - 0 0 1 5 4 - 1 2 D L

Model BT300 VFD only

HP 1, 1.5, 2, 3, 5, 7.5, 10, 15

20, 25, 30, 40, 50, 60, 75 100, 125, 150, 200, 250

X No Fract HP, 5 1/2 HP

Voltage 2 200 to 240 4 380 to 480

NEMA 01 UL Type 1 12 UL Type 12

Type X Drive Only D Disconnect Box – ONLY WITH TYPE 12

Options L LON Card Installed

Example Shown:BT300-001X2-01X = 1 HP, 208V Drive in Type 1 enclosure.BT300-00154-12DL = 1.5 HP, 480V Drive in Type 12 enclosure with an integral disconnect switch and LON card.

Varia

ble

Freq

uenc

y D

rives


C-8

BT300 Output Ratings

Voltage (±10%)Product Number Output Rating Rated

Continuous Current

Frame SizeUL Type 1 UL Type 12

UL Type 12 with Drive Disconnect

HP kW

208V(3-Phase)

BT300-001X2-01X BT300-001X2-12X BT300-001X2-12D 1.0 0.75 4.8 FS4

BT300-00152-01X BT300-00152-12X BT300-00152-12D 1.5 1.1 6.7 FS4

BT300-002X2-01X BT300-002X2-12X BT300-002X2-12D 2.0 1.5 8.0 FS4

BT300-003X2-01X BT300-003X2-12X BT300-003X2-12D 3.0 2.2 11.0 FS4

BT300-005X2-01X BT300-005X2-12X BT300-005X2-12D 5.0 4.0 18.0 FS5

BT300-00752-01X BT300-00752-12X BT300-00752-12D 7.5 5.5 24.0 FS5

BT300-010X2-01X BT300-010X2-12X BT300-010X2-12D 10.0 7.5 31.0 FS5

BT300-015X2-01X BT300-015X2-12X BT300-015X2-12D 15.0 11.0 48.0 FS6

BT300-020X2-01X BT300-020X2-12X BT300-020X2-12D 20.0 15.0 62.0 FS6

BT300-025X2-01X BT300-025X2-12X BT300-025X2-12D 25.0 18.5 75.0 FS7

BT300-030X2-01X BT300-030X2-12X BT300-030X2-12D 30.0 22.0 88.0 FS7

BT300-040X2-01X BT300-040X2-12X BT300-040X2-12D 40.0 30.0 105.0 FS7

BT300-050X2-01X BT300-050X2-12X — 50.0 37.0 140.0 FS8

BT300-060X2-01X BT300-060X2-12X — 60.0 45.0 170.0 FS8

230V(3-Phase)

BT300-075X2-01X BT300-075X2-12X — 75.0 55.0 205.0 FS8

BT300-100X2-01X BT300-100X2-12X — 100.0 75.0 261.0 FS9

BT300-125X2-01X BT300-125X2-12X — 125.0 90.0 310.0 FS9

380V to 480V (3-Phase)

BT300-00154-01X BT300-00154-12X BT300-00152-12D 1.5 1.1 3.7 FS4

BT300-002X4-01X BT300-002X4-12X BT300-002X4-12D 2.0 1.5 5.3 FS4

BT300-003X4-01X BT300-003X4-12X BT300-003X4-12D 3.0 2.2 6.2 FS4

BT300-005X4-01X BT300-005X4-12X BT300-005X4-12D 5.0 4.0 10.6 FS4

BT300-00754-01X BT300-00754-12X BT300-00752-12D 7.5 5.5 13.2 FS4

BT300-010X4-01X BT300-010X4-12X BT300-010X4-12D 10.0 7.5 16.0 FS5

BT300-015X4-01X BT300-015X4-12X BT300-015X4-12D 15.0 11.0 23.0 FS5

BT300-020X4-01X BT300-020X4-12X BT300-020X4-12D 20.0 15.0 31.0 FS5

BT300-025X4-01X BT300-025X4-12X BT300-025X4-12D 25.0 18.5 38.0 FS6

BT300-030X4-01X BT300-030X4-12X BT300-030X4-12D 30.0 22.0 46.0 FS6

BT300-040X4-01X BT300-040X4-12X BT300-040X4-12D 40.0 30.0 61.0 FS6

BT300-050X4-01X BT300-050X4-12X BT300-050X4-12D 50.0 37.0 72.0 FS7

BT300-060X4-01X BT300-060X4-12X BT300-060X4-12D 60.0 45.0 87.0 FS7

BT300-075X4-01X BT300-075X4-12X BT300-075X4-12D 75.0 55.0 105.0 FS7

BT300-100X4-01X BT300-100X4-12X — 100.0 75.0 140.0 FS8

BT300-125X4-01X BT300-125X4-12X — 125.0 90.0 170.0 FS8

BT300-150X4-01X BT300-150X4-12X — 150.0 110.0 205.0 FS8

BT300-200X4-01X BT300-200X4-12X — 200.0 132.0 261.0 FS9

BT300-250X4-01X BT300-250X4-12X — 250.0 160.0 310.0 FS9



C-9

BT300 Type 1 and 12 Frame Sizes and Power Range

Volt

age KW 0.75 1.1 1.5 2.2 4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160

HP 1 1.5 2 3 5 7.5 10 15 20 25 30 40 50 60 75 100 125 150 200 250

208VF

ram

e S

ize

4 5 6 7 8 9 NA

480V N/A 4 5 6 7 8 9

BT300 Dimensions and Weights

Frame Size Height in. (mm)

Width in. (mm

Depth in. (mm

(without Disconnect)

Depth in. (mm

(with Disconnect)

Weight lb. (kg)

FS4 12.9 (328) 5.0 (128) 7.5 (190) 10.6 (270) 13.0 (6)

FS5 16.5 (419) 5.7 (144) 8.4 (214) 11.6 (294) 22.0 (10)

FS6 21.9 (557) 7.7 (195) 9.0 (229) 11.9 (302) 44.0 (20)

FS7 26.0 (660) 9.3 (237) 10.2 (259) 13.1 (332) 83.0 (37.5)

FS8 38.0 (966) 11.4 (290) 13.5 (343) N/A 145.5 (66)

FS9 45.3 (1150) 18.9 (480) 14.4 (365) N/A 238.0 (108)

Varia

ble

Freq

uenc

y D

rives


C-10

BT300 Dimensions

128 (5.03)

100 (3.93)Ø7 (.27)

Ø13 (.51)

313

(12.

32)

100 (3.93)

328

(12.

91)

190 (7.48)

Type 1 / IP21

151

(5.9

4)

112

(4.4

0)

Type 12 / IP54

Ø25 (.98)

112

(4.4

0)

147

(5.7

8)

BT9080mm (in.)

Ø25 (.98)

FS4, Wall-Mount

FS5, Wall-Mount



C-11

BT300 Dimensions

195 (7.67)

148 (5.82)

Ø 15,5 (.61)Ø9 (.35)

557

(21.

92)

541

(21.

29)

Ø9 (.35) 148 (5.82)

229 (9.01)

43,7

(1.7

2)

148

(5.8

2)

151

(5.9

4)

Type 1 / IP21

Ø40 (1.57)

Ø33 (1.29)

Ø40 (1.57)

42(1

.65)

148

(5.8

2)

151

(5.9

4)

Type 12 / IP54 BT9082mm (in)

Ø25 (.98) Ø25 (.98)

259 (10.19)

Ø20 (.78)

660

(25.

98)

645

(25.

39)

237 (9.33)

190 (7.48) Ø9 (.35)Ø16 (.62)

Ø51 (2)

Type 1 / IP21

160

(6.2

9)

211

(8.3

0)

Type 12 / IP54

Ø25 (.98)

Ø50 (1.96)

160

(6.2

9)

217

(8.5

4)

9083bt

mm (in)

FS6, Wall-Mount

FS7, Wall-Mount

Varia

ble

Freq

uenc

y D

rives


C-12

BT300 Dimensions

FS8, Wall-Mount



C-13

BT300 Dimensions

FS9, Wall-Mount

Varia

ble

Freq

uenc

y D

rives


C-14

Use this Master HVAC Catalog and Siemens online ordering to maximize ordering efficiency. Go online to:

• Place orders• Browse this catalog online• Check product availability and pricing• Specify FREE valve tagging• Download invoices• Track shipments• Print out product information for submittals• Link to technical documentation• Download installation instructions• Create a reusable template order form for frequently ordered parts

See how easy it is to save time and money. Register today at:www.usa.siemens.com/buildingtechnologiesonlineordering

Online 24/7 ordering convenience



C-15DescriptionThe BT300 was designed from the onset with reliability in mind. The BT300 is the first VFD in today’s market which has utilized ALT testing from product design to production deployment.

However in today’s market, some customers want additional assurance their equipment will run regardless of the situation. To accommodate these situations, Siemens has developed a companion product for the BT300, the BT300 with Bypass Options.

As the word indicates, a “bypass” is defined in an engineering spec as a means of taking the drive out of the electrical power loop while keeping the HVAC system up and running.

BT300 is available with two types of bypass options. The BT300 with Conventional bypass is designed with 2 contactors and a service switch or the traditional 3-contactor configuration to bypass the drive, and incorporates selector switches and indicator lights to accomplish its primary functions. The second option, an Electronic bypass utilizes internal control boards that act as the brains and eliminates the control wiring, relay logic, terminal blocks and replaces them with advanced built-in features accessible from an electronic keypad.

Features• Contactors electronically interlocked• Advanced diagnostic board built into the bypass for

determining status of

– M1 and M2 contactors

– Overload – Customer supplied start/stop – Status of Essential Services

• Step-down transformer with fused primary and thermal fused secondary circuit

• Fused disconnect or circuit breaker Option • 100,000 AIC short circuit rating• Customer Supplied Terminal strip

Conventional Bypass Control:

• Drive test switch

• Drive-Off-Bypass selector• Bypass Light

• Fused disconnect or circuit breaker

• Optional 2-contactor with service switch or 3-contactor design (input, output and bypass)

Electronic Bypass Control

• Auto Bypass• Option to install 8 separate safety circuits• Fieldbus in Bypass

• Essential Service Mode (Fire mode) • Damper Interlock • Remote start via network

BT300 with Bypass Options

BT300

BT300 Variable Frequency Drives with Bypass Options.Energy &

Atmosphere

Important Note: VFD products are only available through authorized distribution channels. To locate an authorized distributor, please contact a Siemens Building Technologies representative at: 1.800.516.9964.

Varia

ble

Freq

uenc

y D

rives


C-16

Type 1 Bypass Approximate Weights

Frame Size 4 5 6 7 8 and 9

Weight lbs. (kg) 50 (23) 69 (31) 112 (51) 187 (85) 1000 (454)

BT300 with Bypass Options Product Ordering

Your Product Number

Example Product Number B T E - 1 2 5 X 4 - B 0 1 2 L

Model(s)

BTC Conventional BTE Electronic

HP

1, 1.5, 2, 3, 5, 7.5,10,15

20, 25, 30, 40, 50, 60, 75

100, 125, 150, 200, 250

X=no fract HP

5= 1/2 hp

Voltage

2 200 to 240

4 380 to 480

Disconnect

F Fused Disconnect

B Circuit Breaker Enclosure

01 Enclosure Type 1

Contactor

3 3 contactors (input/output and bypass contactors) (Conventional option only) 2 2 contactors bypass with service switch

Options

L Lon Card Installed

Example shown: BTE -125X4 -B012L BT300 Electronic Bypass, 480 volt, 125hp, Type 1, circuit breaker and 2 Contactor bypass witha service switch and LonWorks card installed in drive

BT300 Bypass Options Frame Sizes and Power Ranges

Volt

age KW 0.75 1.1 1.5 2.2 4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160

HP 1 1.5 2 3 5 7.5 10 15 20 25 30 40 50 60 75 100 125 150 200 250

208V

Fra

me

Siz

e

4 5 6 7 8 9 NA

480V N/A 4 5 6 7 8 9



C-17

BT300 Bypass Options Dimensions

4.000 1.49

6.76

.38 MOUNTING HOLESTYPICAL (4) PLACES

34.625

.38

35.48

1/2" CONDUIT HOLEWITH 3/4" KNOCKOUT RINGTYPICAL (5) PLACES

1.49 4.000

6.76


.38

43.250

44.10


3/4" CONDUIT HOLEWITH 1" KNOCKOUT RINGTYPICAL (2) PLACES

1.49 6.000

8.76


53.750

.50

54.75


1-1/4" CONDUIT HOLEWITH 1-1/2" KNOCKOUT RINGTYPICAL (2) PLACES

Frame Size 4

Frame Size 5

Frame Size 6

4.000 1.49

6.76


34.625

.38

35.48


1.49 4.000

6.76


.38

43.250

44.10


3/4" CONDUIT HOLEWITH 1" KNOCKOUT RINGTYPICAL (2) PLACES

Varia

ble

Freq

uenc

y D

rives


C-18

BT300 Bypass Options Dimensions

4.18 6.000

14.16


57.375

.50

58.50


2" CONDUIT HOLEWITH 2-1/2" KNOCKOUT RINGTYPICAL (2) PLACES

.94 (4) PLACES

TYPICAL

1.28

29.409

29.409

TOP ENTRY, BLANK CONDUIT PLATES

32.58(TYPE 1 & 12)

90.71

1.18 TYPICAL

(4) PLACES

92.99

Frame Size 7 Frame Size 8 & 9



C-19

Legacy Variable Frequency Drives

Features• Built-in SBT P1 and JCI N2 (Metasys®) building

automation system protocols for easy network integration

• LON, Modbus RTU Interfaces optional• Low harmonics design reduces noise and interference;

eliminates need for filters/reactors in most installations • Built-in PID for fast and accurate pressure control • Pump staging for open loop, constant pressure, and

constant flow-type applications • Multi-level program access

SED2 Variable Frequency Drives Family.


Options• LON Interface • Modbus RTU Interface• Advanced Operator Panel (AOP) Module• PC Kit

SED2

Energy &Atmosphere

• Belt failure detection with or without an external sensor

• Service mode for applications requiring continuous, uninterruptible operation

• Accepts a wide variety of digital and analog I/O types, including direct Siemens Ni 1000 RTD sensor level inputs

• One common interface throughout all power ranges • Optional Advanced Operator Panel for uploading/

downloading parameters

• Full form C relay contacts for digital outputs

Varia

ble

Freq

uenc

y D

rives


C-20

Input Voltage and Power Ranges (3 phase)

208V and 230V to 240V, 3 ac±10% ...................................1 hp to 60 hp 380V to 480V, 3 ac ±10% .................................................1 hp to 125 hp

500V to 600V, 3 ac ±10% .................................................1 hp to 125 hp

Input Frequency .................................................................47 Hz to 63 HzOutput Frequency ..............................................................0 Hz to 150 HzPower Factor .......................................................................................≥0.9VFD degree of efficiency....................................................... 96% to 97%Switch-on Current .................................. Less than nominal input current

Auxiliary Supply 24V ....................... Glavanically separated, unregulated auxiliary supply (18V to 32V) 100 mA

Overload Capacity ...................................................110% for 60 secondsControl Method ..........................Linear, parabolic and programmable V/f;

and flux current control low-power modePWM Frequency ...........2k Hz to 16k Hz (adjustable in 2k Hz increments)Fixed Frequencies ........................................................ 15 programmable

Skip Frequency Bands ................................................... 4 programmable

Setpoint Resolution ............................................................0.01 Hz digital 0.01 Hz serial 10 bit analog

Digital Inputs (Sink/Source) ............................6: fully programmable and scalable isolated digital inputs, switchable

Analog Inputs ...............................................2: 0 to 10 Vdc, 0/4 to 20 mA, can also be configured as digital inputs

or Ni 1000 input

Relay Outputs .................................2: configurable 30 Vdc/5A (resistive), 250 Vac/2A (inductive)

Analog Outputs .................................2: programmable (0/4 mA to 20 mA, or 0 Vdc to 10 Vdc)

Serial Interface .................................................RS-485 transmission rate: Up to 38.4k Baud Protocols: USS, P1 and N2

Protection Level................................................................................. IP20 NEMA Type 1 with protective shield and gland plate installed

Temperature Ranges ..............Operating: 14°F to 104°F (–10°C to 40°C) Storage: –40°F to 158°F (–40°C to 70°C)

Humidity ..............................................................95% rh, non-condensingOperational Altitudes .............................................Up to 3280 ft (1000m)

above sea level without derating

Protection Features ....................Under-voltage, Over-voltage, Overload, Ground fault, Short circuit, Stall prevention,

Locked motor, Motor overtemperature l2 t PTC, Over-temperature, Parameter PIN protection.

Standards ................................................................... UL, cUL, CE, C-tickCE Conformity ......Conformity with EC Low Voltage Directive 73/23/EECOptions .........................................LON Interface, Modbus RTU Interface,

BACnet MS/TP Interface, Advanced Operator Panel (AOP) Module, PC Kit

Variable Frequency Drives Specifications

Notes: Example Shown:

1. Available only with Voltage Codes 3 and 4. SED2-0.75/22X = SED2 VFD only, 0.75 kW (1 hp), 200 to 240V, open type IP20.

Model SED2- VFD only

kW rating

0.75, 1.1, 1.5, 2.2, 3, 4, 5.5, 7.5, 11, 15, 18.5, 22, 30, 37, 45, 55, 75, 90 [See Note 1 for these selections]

Voltage 2 200 to 240V 3 380 to 480V 4 500 to 600V

NEMA rating 2 (IP 20) 1 NEMA Type 1

Filter X Factory Required Designator

(Uses 2 to 4 spaces plus a divider “/”)

Your Product Number

Example Product Number S E D 2 - 0 . 7 5 / 2 2 X

Variable Frequency Drives Product Ordering



C-21

Variable Frequency Drives Dimensions and Weights

Variable Frequency Drives Frame Sizes

IP20 SED2 VFDs

Frame Size Height Width Depth Weight Lb. (kg)

A 6.8 (173) 2.9 (73) 5.9 (149) 2.9 (1.3)

B 8.0 (202) 5.9 (149) 6.8 (172) 7.5 (3.4)

C 9.6 (245) 7.3 (185) 7.7 (195) 12 (5.5)

D 20.5 (520) 10.8 (275) 9.6 (245) 35 (16)

E 25.6 (650) 10.8 (275) 9.6 (245) 44 (20)

F 33.5 (850) 13 (350) 12.6 (320) 116 (53)

NEMA Type 1 SED2 VFDs Assembled with Protective Shield and Gland Plate

Frame Size Height Width Depth Weight Lb. (kg)

A 9.1 (231) 2.9 (73) 5.9 (149) 3.2 (1.5)

B 11.8 (300) 5.9 (149) 6.8 (172) 8.3 (3.8)

C 13.8 (351) 7.3 (185) 7.7 (195) 13.6 (6.2)

D 24.6 (625) 10.8 (275) 9.6 (245) 37.5 (17)

E 29.7 (754) 10.8 (275) 9.6 (245) 46.4 (21)

F 54.5 (1384) 16.0 (406) 14.0 (356) 200 (91)

SED2 IP20 and NEMA Type 1 Frame Sizes and Power Ranges

HP 1 1.5 2 3 4 5 7.5 10 15 20 25 30 40 50 60 75 100 125

kW .75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90

240V A B C D E F N/A

480V A B CD E F

575V CVFD

0163

R1

Varia

ble

Freq

uenc

y D

rives


C-22

This handy online feature stores all your past and current orders online for quick and easy reference. The Order Tracker function lets you access information such as:

• Ordered By • Date Placed• Order No. • Acknowledgement of Order• Shipping Date • Shipment Tracking

To view your history and status, register online atwww.usa.siemens.com/buildingtechnologiesonlineordering

Online order tracking



C-23

Legacy Variable Frequency Drives with Bypass Options

Bypass Power3-Contactor: Input, Output, & Bypass• Overload protection in bypass mode• Step-down transformer with fused primary and secondary• Contactors electrically and mechanically interlocked• Drive test function• Complete electrical isolation of drive

Input Device• Fused disconnect• Circuit breaker (optional)• All doors are interlocked and padlockable

Reactor Options• Input line reactor mounted in bypass option enclosure. • Line reactor supplied separately.• Load reactor (in NEMA 1/3R enclosure) supplied separately.

E-Bypass ControlAuto Bypass• Relay logic allows user to send the motor to bypass

mode based on the drive’s programmable relay.• The drive’s programmable relay, typically set to fault,

can be set up for applications that run full speed for an extended period of time.

Enable Input• Generally used for safety tie-ins; the motor will not

operate the drive or bypass when open.

Common Remote Start/Stop• Common remote start/stop can be used in both drive

and bypass mode.

Essential Services Mode• Also used for smoke purge; the motor goes to bypass

regardless of the selected mode.• No call to stop will have an effect, including open safety

or stop commands.• Only turning the power off or opening this contact will

stop the motor.

Conventional Bypass ControlEnable Input• Generally used for safety tie-ins; the motor will not

operate the drive or bypass when open.

Essential Services Mode• Typically used for smoke purge; the motor goes to

bypass regardless of the selected mode.• No call to stop will have an effect, including open safety

or stop commands.• Only turning the power off or opening this contact will

stop the motor.

Conventional Bypass – Door Mounted Control Devices • Drive-Off-Bypass selector • Bypass pilot light• Drive Test on/off selector

SED2 Variable Frequency Drives with Conventional Bypass Options Family.


SED2

Drive

Motor

2 Contactor Bypass

InputDevice

Drive

Motor

3 Contactor Bypass

InputDevice

VF

0302

R1

Energy &Atmosphere

Varia

ble

Freq

uenc

y D

rives


C-24

Electronic Bypass SpecificationsInput Voltage (3-phase)

208V, 3 AC±10% .........................1 hp to 60 hp (2.3 amps to 154 amps) 240V, 3 AC±10% .........................1 hp to 60 hp (2.3 amps to 154 amps) 480V, 3 AC ±10% ......................1 hp to 125 hp (1.2 amps to 178 amps) 575V, 3 AC ±10% ......................1 hp to 125 hp (2.3 amps to 125 amps)Protection Level...................................................................NEMA Type 1Digital Inputs

Six Digital Inputs as follows ..........Remote start input, Remote safety 1, Remote safety 2, Interlock start,

Essential services, Overload trigger. Inputs require a contact closure capable of providing a

low impedance path at currents less than 20 mA. Relay/Digital Outputs

Six Relay/Digital Outputs as follows ........................................VFD fault, Programmable output, Drive select, Bypass select,

Running on bypass, Overload fault, Each relay has a maximum rating of 2A at 120Vac.

Conventional Bypass SpecificationsInput Voltage (3-phase)

208V, 3 AC±10% .........................1 hp to 60 hp (2.3 amps to 154 amps) 240V, 3 AC±10% .........................1 hp to 60 hp (2.3 amps to 154 amps) 480V, 3 AC ±10% ......................1 hp to 125 hp (1.2 amps to 178 amps) 575V, 3 AC ±10% ......................1 hp to 125 hp (2.3 amps to 125 amps)Protection Level...................................................................NEMA Type 1 Temperature

Operating......................................................... 32 to 104°F (0 to +40°C) Storage ......................................................-40 to +158°F (-40 to +70°C)Humidity .....................................................0 to 95% RH, non-condensing

Variable Frequency Drives with Conventional Bypass Option Specifications


E-Bypass — Door Mounted Control Devices

VFD Bypass

STOPRESET

InputOn/Off

Enable

InputContactor

OutputContactor

BypassContactor

VFD

HandStart

RemoteStart

INTERLOCK START LOGICEnable Commanded Proofed

Auto Bypass Enabled

Essential Services

VFD Fault

Safety Fault

Overload Fault

VF

D00

97R

2

OverloadRelay

Motor



C-25

Notes:

1. Available only with Voltage Codes 3 and 4. 2. Input line reactors will be installed in bypass enclosures. Load reactors are supplied seperately in NEMA 1 or

NEMA 3R enclosures.

Example shown: VBA340.B133XVBA Conventional Bypass, 40 HP, 480V, Circuit Breaker, NEMA Type 1, 3-Contactor Bypass with Input Line Reactor.VBE340.F130X VBE Electronic Bypass, 40 hp, 480V, fused disconnect, NEMA Type 1, 3 contactors bypass, no reactor.

Legacy Variable Frequency Drives with Conventional Bypass Option Product Ordering

Your Product Number

Example Product Number V B A 3 4 0 . B 1 3 3 X

Model VB VFD with an Extended Box

Series A Conventional Bypass E Electronic Bypass

Voltage 1 208 V 2 230 to 240 V 3 380 to 480 V 4 500 to 600 V

HP rating 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.5, 10, 15, 20, 25, 30, 40, 50,

60, 75, 100, 125 [See Note 1 for these selections]

Disconnect F Fused Disconnect B Circuit Breaker

NEMA rating 1 NEMA Type 1

Contactor 3 3 Contactors (Input, output, and bypass contactors) 0 None (Extended box only. No bypass.)

Reactor [See Note 3] 0 None 3 Line Reactor Filter X Factory Required Designator

Varia

ble

Freq

uenc

y D

rives


C-26

Frame Size Wt. Lb (kg)

A 45 (20)

B 55 (25)

C 75 (34)

D 150 (68)

E 180 (82)

F 470 (213)

Note: Exact weight will be affected by the actual horsepower/voltage and the selected power options.

HP kW 208/240V 480V 575V

1 .75 A

A

C

1.5 1.1

B2 1.5

3 2.2B

5 4

C7.5 5.5

C10 7.5

15 11

D20 15

25 18.5

D D30 22 E

40 30

F50 37E E

60 45

75 55

N/A FF100 75

125 90

HA1 — N/A

NEMA 1 Bypass Approximate Weights

NEMA 1 Bypass Frame Sizes and Power Ranges



C-27

NEMA 1 Dimensions

DepthWith

Handle9.6 (24)

DepthWith

Handle12.2 (31)

DepthWith

Handle9.6 (24)

13.2(34)

34(86)

48(122)

11.5(29)

Frame SizeA and B

Frame Size C

12.4(31)

10.5 TYP(27)

10.6(27)

11 TYP(28)

20.8(53)

DepthWith

Handle10.4 (26)

53.5(136)

Frame Size D

19.9(51)

11.5 TYP(29)

1.5(3.8)

1.5(3.8)

2(5)

2(5)

4(10)

3.4(8.6)

57.5(146)

45.5(116)

Depth17.4(44)

Frame Size FFrame Size E

20.8(53)

58.5(149)

19.9(51)

10 TYP(25)

5.5(14)

3(7.6)

2.9(7.4)

2.9(7.4)

1(2.5)

VF

D01

27R

2

= Protective Shield

DepthWith

Handle9.6 (24)

DepthWith

Handle12.2 (31)

DepthWith

Handle9.6 (24)

13.2(34)

34(86)

48(122)

11.5(29)

Frame SizeA and B

Frame Size C

12.4(31)

10.5 TYP(27)

10.6(27)

11 TYP(28)

20.8(53)

DepthWith

Handle10.4 (26)

53.5(136)

Frame Size D

19.9(51)

11.5 TYP(29)

1.5(3.8)

1.5(3.8)

2(5)

2(5)

4(10)

3.4(8.6)

57.5(146)

45.5(116)

Depth17.4(44)

Frame Size FFrame Size E

20.8(53)

58.5(149)

19.9(51)

10 TYP(25)

5.5(14)

3(7.6)

2.9(7.4)

2.9(7.4)

1(2.5)

VF

D01

27R

2

= Protective Shield

Dimensions shown in inches (mm).

Varia

ble

Freq

uenc

y D

rives


C-28

Our customer support teams are accessible and happy to assist you with ordering, fulfillment, and shipping questions. Call a representative at 1-800-516-9964 from 7 am to 5:30 pm (CST) Monday through Friday.

Contact Customer Support or your Account Executive with any questions. We appreciate your business and look forward to helping you!

We’re happy to assist you



C-29

Legacy VFD NEMA Type 3R & Type 3R Harsh Environment (3RHE) Bypass

FeaturesBypass Power3-Contactor: Input, Output, and Bypass • Overload protection in bypass mode. • Step-down transformer with fused primary

and secondary. • Contactors electrically and mechanically interlocked. • Drive test function. • Complete electrical isolation of drive.

Input Device• Fused disconnect. • All doors are interlocked and padlockable.

Reactor Options

• Line reactor mounted in bypass enclosure. • Line reactor supplied separately

(in NEMA Type 3R enclosure). • Load reactor supplied separately.

Bypass – Door Mounted Control Devices

• Drive-Off-Bypass selector • Bypass pilot light• Drive Test On-Off selector

SED2 Variable Frequency Drives NEMA Type 3R Bypass.


SED2

Energy &Atmosphere

Varia

ble

Freq

uenc

y D

rives


C-30

Input Voltage (3 phase) .............................................. 208V, 3 AC ±10% * 240V, 3 AC ±10% *

480V, 3 AC ±10% 575V, 3 AC ±10%*

* Not available in the 3RHE modelsProtection Level ...............................................................NEMA Type 3RTemperature

Operating.............14°F to 104°F (–10°C to 40°C), HT1 to 122°F (50°C) Storage .................................................–40°F to 158°F (–40°C to 70°C)High-Temperature Model (HT1 and HT2)

Operating................................................14°F to 122°F (–10°C to 50°C) Storage ................................................ –40°F to 158°F (–40°C to 70°C)Humidity .......................................................0 to 95% rh, non-condensing

NEMA Type 3R/3RHE Bypass Specifications



C-31

VFD NEMA Type 3R & Type 3R Harsh Environment (3RHE) Bypass Product Ordering

Your Product Number

Example Product Number V B A 3 4 0 . F 3 3 0 X H E 2

Model VB VFD with an Extended Box

Series A Conventional Bypass

Voltage 1 208 V 2 230 to 240 V 3 380 to 480 V 4 500 to 600 V

HP rating 1.0, 1.5, 2.0, 3.0, 4.0, 5.0, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 75, 100, 125 [See Note 1 for these selections]

Disconnect F Fused Disconnect

NEMA rating 3 NEMA Type 3R

Contactor 0 None 3 3 Contactors (Input, output, and bypass)

Reactor [See Note 2] 0 None 3 Line Reactor

Filter X Factory Required Designator

Options (If no option is required, leave field blank) HT1 High Temperature [See note 3] HE2 Harsh Enviroment Nema 3R [See note 4] HT2 Harsh Enviroment Nema 3R — High Temperature Rating [See note 5]

Notes:

1. Available only with Voltage Codes 3 and 4. 2. Input line reactors will be installed in bypass enclosures. Load reactors are supplied seperately in NEMA 1 or

NEMA 3R enclosures.3. HT1 (122°F, 50°C) is not available for all ratings. 208V and 230 to 240V to 3 hp are all HT1; 480V to 5 hp are all HT1. 4. HE2 available only with Voltage Codes 3 and 4. (480V to 40 hp) 5. HT2 (122°F, 50°C) is not available for all ratings. 480V to 5 hp are all HT2

Example Shown:VBA340.F330XHE2 VBA Conventional Bypass, 480V, 40 hp, fused disconnect, NEMA Type 3R, 3 contactors, no reactor, harsh environment.

Varia

ble

Freq

uenc

y D

rives


C-32

DEPTH = 11-1/2 (292)

ENCLOSURE FRAME ABC ENCLOSURE FRAME DE

DEPTH = 12-1/2 (318)

ENCLOSURE FRAME F

DEPTH = 16-1/2 (419)

MOUNTING CLEARANCE FOR PROPER AIRFLOW:LEAVE 1 FOOT (305 mm) BETWEEN THE NEMA TYPE 3R BYPASS AND ANY ADJACENTSOLID STRUCTURE THAT IS NOT USED FORMOUNTING PURPOSES.

LEAVE 3 FEET (914 mm) BETWEEN THE NEMA TYPE 3R BYPASS AND ANY OTHER NEMA TYPE 3R BYPASS OR VFD.

34 (864)

75(1905)

74-1/8(1882)

58 (1473)

42 (1067)

46 (1169)

57(1448)

56-1/8(1425)

30 (762)

18 (457)

28-1/2 (724)

30 (762)

VF

D01

78R

2

NEMA Type 3R Enclosure Dimensions

Dimensions shown in inches (mm).

34(848)

18(457)

29(724)

30(756)

VF

D02

22R

1

Enclosure Frame ABC Enclosure Frame DE Enclosure Frame F

Enclosure Frame B Enclosure Frame C Enclosure Frame D

VF

D02

25R

1

42(1051)

26(660)

50(1272)

51(1288)

VF

D02

28R

1

44(1099)

28(711)

56(1424)

57(1440)

Depth = 10 Inches Depth = 11 Inches Depth = 14 Inches

Depth = 11-1/2 Inches (292)



NEMA Type 3RHE Enclosure Dimensions



C-33

NEMA Type 3R Bypass Non-HT1 Enclosure Frame Sizes and Power Ranges

HP 1 1.5 2 3 4 5 7.5 10 15 20 25 30 40 50 60 75 100 125

kW .75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90

208/240V(Rated as HT1,

High Temperature package)ABC DE F N/A

480V(Rated as HT1,

High Temperature package)ABC DE F

575V ABC DE F

VF

D01

79R

2

NEMA Type 3R Bypass HT1 Enclosure Frame Sizes and Power Ranges

HP 1 1.5 2 3 4 5 7.5 10 15 20 25 30 40 50 60 75 100 125

kW .75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90

208/240V ABC DE F N/A

480V ABC DE F N/A

575V ABC DE F N/AVF

D01

80R

2

NEMA 3RHE Bypasses HE2 Frame Sizes and Power Ranges

HP 1 1.5 2 3 4 5 7.5 10 15 20 25 30 40 50 60 75 100 125

kW .75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90

208/240V N/A

480V N/A C D N/A

575V N/AVF

D01

80R

2

NEMA 3RHE Bypasses HT2 Frame Sizes and Power Ranges

HP 1 1.5 2 3 4 5 7.5 10 15 20 25 30 40 50 60 75 100 125

kW .75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90

208/240V N/A

480V N/A B C D N/A

575V N/AVF

D01

80R

2NEMA Type 3R and 3RHE Approximate Weights

3R Frame Size Wt. Lb (kg)

ABC 130 (59)

DE 300 (136)

F 550 (249)

Note: Exact weight will be affected by actual horsepower/voltage and selected power options

3RHE Frame Size Wt. Lb (kg)

B 150 (68)

C 220 (100)

D 330 (150)

Varia

ble

Freq

uenc

y D

rives


C-34

Use this Master HVAC Catalog and Siemens online ordering to maximize ordering efficiency. Go online to:

• Place orders• Browse this catalog online• Check product availability and pricing• Specify FREE valve tagging• Download invoices• Track shipments• Print out product information for submittals• Link to technical documentation• Download installation instructions• Create a reusable template order form for frequently ordered parts

See how easy it is to save time and money. Register today at:www.usa.siemens.com/buildingtechnologiesonlineordering

Online 24/7 ordering convenience



C-35

PRODUCT PAGE #

BT300

PC Cable for Software Tools C-36

Real Time Clock Battery Package C-36

Door Panel Kit C-36

Hand Held Panel Kit C-36

Flange Mounting Kits C-36

Varnished Option Boards C-37

SED2 to BT300 Migration Kits C-38

SED2

PC Kit C-39

Mounting Hardware C-39

Filter Kits C-39

Operator Panel C-39

LON Interface Option C-40

Modbus Interface C-40

Accessories & Service Kits

Table of Contents

NEW!

Varia

ble

Freq

uenc

y D

rives


C-36

Accessories and Service Kits

Description Part No.

BT300

PC Cable for Software Tools, USB to RS-485, 3m BT300-CABLE

Battery package, 5 pcs BT300-BATTERY

Door Panel Kit, Drive Side IP54 Protected, 3m BT300-PANEL-N12

Hand Held Panel Kit BT300-HHPANEL

Flange Mounting Kit, for FS4 BT300-FLG-FS4






C-37


BT300

6 X DI/DO, Programmable BT300-OPT-B1-V

2 X RO + Thermistor BT300-OPT-B2-V

1 X AI, 2 X AO (Isolated) BT300-OPT-B4-V

3 X RO BT300-OPT-B5-V

1 X RO, 5 X DI (42-240VAC) BT300-OPT-B9-V

LonWorks BT300-OPT-C4-V

1xAO, 1xDO, 1xRO BT300-OPT-BF-V

NI1000 Sensor Card BT300-OPT-BH-V

Varia

ble

Freq

uenc

y D

rives


C-38


BT300

SED2 208V to 3HP 480V to 5HP SED2-BT300-AB-4

SED2 208V to 4HP 480V to 7.5HP SED2-BT300-C-4

SED2 208V to 10HP 480V to 20HP SED2-BT300-C-5

SED2 208V 15 to 20hp 480V 25 to 40hp SED2-BT300-D-6

SED2 208V 25hp SED2-BT300-D-7

SED2 208V 30hp 480V 50 to 60hp SED2-BT300-E-7

SED2 FSC to BT300 Remote Mount SED2-BT300-C-R

SED2 FSD and FSE to BT300 Remote Mount SED2-BT300-DE-R

SED2 208V 40hp 480V 75hp SED2-BT300-F-7

SED2 208V 50 to 60hp 480V 100 to 125hp SED2-BT300-F-8




C-39


SED2

PC Kit. SED2-PC-KIT

Gland Plates. (included with NEMA Type 1)

• Frame A SED2-GL-A

• Frame B SED2-GL-B

• Frame C SED2-GL-C

Protection Shield. (included with NEMA Type 1)

• Frame A SED2-PS-A

• Frame B SED2-PS-B

• Frame C SED2-PS-C

• Frame D, E SED2-PS-DE

NEMA Type 1 and 3R Enclosed Reactors. Contact Sales Partners

NEMA Type 3R Floor Mounting Kit.

• Frames A, B, C 994-809

BOP/AOP Door Mounting Kits.

• BOP/AOP Single Inverter SED2-DOOR-KIT1

• AOP Multi-Inverter SED2-DOOR-KIT2

Operator Panel.

• Basic Operator Panel (included with all SED2s) SED2-BOP1

• Advanced Operator Panel (AOP) SED2-AOP1

Varia

ble

Freq

uenc

y D

rives


C-40


SED2

LON Interface Option. SED2-LONI/F

Modbus RTU Interface Module for SED2. SED2-MODBUS2

SED2 Modbus Configuration Kit. SED2-MODBUS2_KIT


Table of Contents - Control Management, Inc. | …€¦ · schedules and three timer inputs •...

Documents

Transcript of Table of Contents - Control Management, Inc. | …€¦ · schedules and three timer inputs •...