Table cleanup details
description
Transcript of Table cleanup details
Table cleanup details
Prepared by Ted for the 1st trigger rep meeting
(July 13th, 2005)
TDWG Organization
TDWG Heads: Kirsten and Ted
Trigger Table Creation and Testing Coordinator: Veronica Sorin / Zeynep Gunay
Technical Support: Trigger SPLs Vadim Rusu/Roberto Carso/Veronique Boisvert
Trigger Software Coordinator: Daniel Whiteson
Trigger Database: Tom Wright
Trigger Representatives: Exotics Group: Vadim Rusu and Oscar Gonzalez Lopez QCD Group: Mary Convery, Gene Flanagan and Mario Campanelli Top Group: Veronique Boisvert and Ambra Gresele EWK Group: Jiyeon Han B Physics: Konstantin Anikeev and Simone Donati
Now we have the FULL GROUP, this is our 1st Trigger Rep meeting…
Reminder: Plan for Summer
Phase I: Get system in stable condition (with improvements) (June - early July) we are now at step II, final physics tables waiting for EOS tests
Phase II: Trigger Table Cleanup and Optimization (today’s focus)
Phase III: Integrate new triggers (August - Sept)
Phase I: Get system in stable condition
--> see Veronica’s talk for details
Step I: Improving L2 JETs. DONE L2 JETs: improved the “Junk Enhanced Trigger” ROF shoulder threshold at full scale Opened up single track trigger at luminosity below 40E30 (JET_CALIB) Take data for a few stores with no other change, L2 JETs cross section improved dramatically As a result: triggers with DPS at L2 released much earlier
Step II: Switch to new XTRP firmware (early July) ready soon Check track trigger rate changes due to adjacent linker veto Mt cut trigger as test trigger with prescale, map out performace CLC multiplicity trigger as test trigger with prescale, map out performance Added new Z to BBbar and MET + b-jet triggers Take data for a few stores with no other change, data for offline analysis
Will see how much improvements the new track firmware will bring soon
Phase II: Table cleaning and optimizing
What’s the goal? Removing useless or obsolete triggers Add a few mature fully tested triggers Open up more triggers earlier at lower luminosity Increase 20KHz threshold up to 25KHz To pave the road for CLCM trigger and Mt triggers and integrate other test triggers
This is the first step towards table unification The details next….
Table cleaning 1: L1_TEN_TRK2 drives L2_PS0_L1_TEN_TRK2
This is in both high and low lumi tables, doing nothing exceptusing extra L1 bandwidth (will have some overlap)
Should be at least with PS250: L1_TEN_TRK2_PS250
Running at 6KHzdoing nothing, while overall L1A is 14KHz
Table cleaning 2: L1_TWO_TRK10_DPHI20_DPS (CHAMP trigger)
This trigger is in both high and low lumi tables, very high L1 rate at high luminosity when DPS is released.
fully open this trigger with lumi enable at around ~60E30, without DPS.
running at 4KHz,mostly fake junk!wasting L1 bandwidth
Table cleaning 2 (cont): L1_TWO_TRK10_DPHI20_DPS (CHAMP trigger)
At low luminosity, it behaves ok at L2. Much cleaner/pure evts Remove the DPS at L1! fully open it below ~ 60E30 Will get more useful data, without DPS Everyone wins here
Running at~30Hz at L2,mostly rejected at L3! Wasting L2bandwidth…
Table cleaning 3 (already done): L1_TRK10_PS250 for JET_CALIB: move to
DIRAC path
This is in both high and low lumi tables, very low rate though.
Fully enable (no PS) this trigger at luminosity below 40E30, to get more data for JET_CALIB. (done already). Thanks Ken who worked closely with us.
Table cleaning 4: L1_MB_CLC_PS10K for MINIBIAS_1HZ
This trigger is rate limited at L2: L2_RL1.3Hz, RL1Hz reduce the rate at L1: PS100K Have L2 RL3Hz which feeds L3 multiplicity with cut at 20 (to increase its rate) Then L3 prescale by 3, 1Hz for Minibias dataset (keep this the same) Have another L2_RL1.3Hz drives L3 with reco dataset, which feeds YMON.
Table cleaning 5: L1_TOF_14_MIP_&_CLC_PS10K for MINIBIAS_1HZ
This trigger is currently rate limited at L2: L2_RL0.5Hz running at about the same rate as L1_MB_CLC_PS10K, doesn’t do much Remove this trigger, free up L1 bit with high prescale to be used to
control the L1_TWO_TRK2_PS200 (high rate).
Table cleaning 6: L1_TWO_TRK2_PS200
This backup trigger is only in low lumi table It drives L2_PS1K_L1_TWO_TRK2 and L2_TWO_TRK2_D100_PS20 Ideally, would like to replace L1_TWO_TRK2_PS200 with PS4K But only four L1 bits can be prescaled by more than 255 change the PS to 4000 instead, and PS20 away at L2, PS1K ->PS50
Table cleaning 7: “unused?” datasets
Anyone else use these datasets? PLUG_DIJET
JET_20_CENTRAL
All DIJET_MASS (TWO_JET_xx_Mxxx)
So far, no one claimed any of the datasets.
Will remove them.
Table cleaning 8: L1_EM8_&_MET15 replaced by L1_EM8
Specific option L1_MET15_v-1 Instance of MET.- 1. ET = 15 GeV
- 2. SUMET_THRESH_CENTRAL = 1 GeV
- 3. SUMET_THRESH_PLUG = 1 GeV
- 4. Generated Down Load (Instance of MET):
- 1. PREFRED_INPUT_BIT = 2 integer
- 2. PREFRED_OUTPUT_BIT = 2 integer
- 3. FRED_INPUT_BIT = 25 integer
Need to add MET15 requirement at L2 once L1_MET15 is removed
Table cleaning 8: L1_EM8_&_MET15 replaced by L1_EM8
Trigger L2_CEM20_L1_MET15_v-1 Bit: [22(3)]Specific option DCAS_HIGH_EM_v-2 Instance of DCAS_HIGH_EM. 1.DCAS_HIGH_EM_CENTRAL_SEED = 8 GeV 2.DCAS_HIGH_EM_CENTRAL_SHOULDER = 7.5 GeV 3.DCAS_HIGH_EM_FORWARD_SEED = 8 GeV 4.DCAS_HIGH_EM_FORWARD_SHOULDER = 7.5 GeV 5.DCAS_HIGH_EM_PLUG_SEED = 8 GeV 6.DCAS_HIGH_EM_PLUG_SHOULDER = 7.5 GeVSpecific option L2_CEM20_v-1 Instance of PhotonReces. 1.NUMBER = 1 2.ET = 20 GeV 3.HAD_EM = .125 4.ISO_FRACTION = 999 5.ISO_ET = 999 GeV 6.ABS_ETA_MIN = 0 7.ABS_ETA_MAX = 1.1
Table cleaning 9:replace L1_EM8_&CMU1.5_PT1.5 with
L1_EM8
Trigger L1_EM8_&_CMU1.5_PT1.5_v-2 Bit: [10(2)] Specific option L1_CMU1.5_PT1.5_v-1 Instance of
MUON_CMU(P). 1.CMU_STUB_PT = 1.5 GeV/c 2.REQUIRE_HTDC_CMU = 0 3.REQUIRE_CSP = 0 4.REQUIRE_CMP = 0 5.CMU_XFT_PT = 1.52 GeV/c
Generated Down Load (Instance of MUON_CMU(P)): 1.PREFRED_INPUT_BIT = 1 integer 2.PREFRED_OUTPUT_BIT = 25 integer 3.FRED_INPUT_BIT = 12 integer
Table cleaning 9:replace L1_EM8_&CMU1.5_PT1.5 with
L1_EM8
Trigger L2_EM12_ISO_&_CMUP1.5_PT3_v-1 Bit: [49]
Specific option L2_CMUP1.5_PT3_v-1 Instance of Muon. 1.NUMBER = 1 2.XFT_LAYERS = 4 3.XFT_PT = 3.04 GeV/c 4.CALOR_TYPE = 0 5.MUON_TYPE = 3 already has CMUP requirement at L2 with PT3
Table cleaning 10:replace L1_EM8_CMX1.5_PT2_CSX by
L1_EM8
Specific option L1_CMX1.5_PT2_CSX_v-3 Instance of MUON_CMX.
1.CMX_STUB_PT = 1.5 GeV/c
2.REQUIRE_CSX = 1
3.CMX_XFT_PT = 2.04 GeV/c
4.CMX_XFT_LAYERS = 4
5.REQUIRE_HTDC_CMX = 0
Generated Down Load (Instance of MUON_CMX):
1.PREFRED_INPUT_BIT = 8 integer
2.PREFRED_OUTPUT_BIT = 32 integer
3.FRED_INPUT_BIT = 9 integer
Table cleaning 10:replace L1_EM8_CMX1.5_PT2_CSX by
L1_EM8
Trigger L2_EM12_ISO_&_CMX1.5_PT2_CSX_v-1 Bit: [50]1. Specific option DCAS_HIGH_EM_v-2 Instance of DCAS_HIGH_EM. 1.DCAS_HIGH_EM_CENTRAL_SEED = 8 GeV 2.DCAS_HIGH_EM_CENTRAL_SHOULDER = 7.5 GeV 3.DCAS_HIGH_EM_FORWARD_SEED = 8 GeV 4.DCAS_HIGH_EM_FORWARD_SHOULDER = 7.5 GeV 5.DCAS_HIGH_EM_PLUG_SEED = 8 GeV 6.DCAS_HIGH_EM_PLUG_SHOULDER = 7.5 GeV
2.Specific option L2_EM12_ISO_v-1 Instance of PhotonReces.1.NUMBER = 1
2.ET = 12 GeV 3.HAD_EM = .125 4.ISO_FRACTION = .15 5.ISO_ET = 3 GeV 6.ABS_ETA_MIN = 0 7.ABS_ETA_MAX = 3.6 need to add CMX requirements at L2
Table cleaning 11:replace L1_JET10_&_SUMET90 by
L1_JET10
Specific option L1_SUMET90_v-1 Instance of SUMET.
1.ET = 90 GeV 2.SUMET_THRESH_PLUG = 1 GeV 3.SUMET_THRESH_CENTRAL = 1 GeV
Generated Down Load (Instance of SUMET): 1.PREFRED_INPUT_BIT = 0 integer 2.FRED_INPUT_BIT = 6 integer 3.PREFRED_OUTPUT_BIT = 0 integer
Table cleaning 11:replace L1_JET10_&_SUMET90 by
L1_JET10
Specific option L2_THREE_JET10_SUMET90_v-1 Instance of ClusterSum.
1.NUMBER = 3 2.ET_TOTAL = 90 GeV 3.ET = 10 GeV
Already have SUMET90 cut at L2
Table cleaning 12:
J/Psi --> ee running off by existing 4 GeV electron + track at L1 free up one L1 bit and two DIRAC bits keep L2/L3 the same
Table cleaning 13:relax the dx cut at L3: from 20 cm to 40
cmsee Rolf’s talk at last TDWG
Rolf’s list from PHYSICS_3_04 [1,670,576]bit name ptcut dxcut1 BBBAR_TWO_CMUP3:6 3 2516 B_SEMI_CMUP4_SVT_TRACK2_D120:2 4 2017 B_SEMI_CMUP4_TRACK2_D120_DPS:1 4 2020 CEM4_CMUP4:8 4 2023 CMUP4_PEM8:7 4 2040 DIMUON_CMUP4_CMX4:8 4 2041 DIMUON_CMUPCMUP4:5 4 2087 JPSI_CMUP4_CMU_L2_DPS:2 4 2088 JPSI_CMUP4_CMX_L2_DPS:2 4 20116 MUON_CMUP4:7 4 20130 PHOTON_CMUP:7 3 25144 RAREB_CMUPCMU:7 3 25145 RAREB_CMUPCMX:10 3 25161 UPSILON_CMUP_CMU:6 4 20162 UPSILON_CMUP_CMX:10 4 20
Triggers to be added: backup trigger for MET + b-jet: L1_MET15_JET5_TWO_TRK2
prescale at L2 by 1000 (check rate), auto-accept at L3.
backup trigger for L1_MET15 (do we still need above backup?) prescale at L1 by 250 (cannot prescale by 1000) rate limited to 0.5 (?) Hz at L2. L3 auto-accept
Remove old Z to BBbar trigger (if new trigger data is ok)
Change COT spike bit to bit 63.
Anything else which is FULLY ready ?
We already have 15 items on this to-do-list! Try not change too many at one time!
Phase III: Integrate new triggers
August to Sept:
Finish integrating all mature fully tested triggers If you have triggers which are fully ready, they will be integrated! If you have triggers need more tests, let’s test them soon All new/test trigger requests should be done by Trigger Reps.from now on Trigger Reps: please finalize your list/plan at next two meetings Will have trigger rep meeting starting next week (Wed 2-3pm?) The meeting will be dedicated for integrating new triggers
Expand L2 bits from 128 to 192 (“Non-beam test successful” two days ago) Daniel will give a status report soon Take full advantage of new EVB upgrade, Pulsar Phase II L2 system and SVT upgrade (partially installed by then) We should be able to handle 150E30 luminosity with all the improvements The table should be stable by then for this luminosity range