Tablas militares

KUMPULAN TABEL MIL-STD-105E

Ir. Budi Nurtama, M.Agr.

2008Program Studi Supervisor Jaminan Mutu Pangan

PROGRAM DIPLOMAInstitut Pertanian Bogor

i

Tables for MIL-STD-105E *) Page

� Table I. Sample-Size Code Letters. 1

� Table II-A. Single Sampling Plans for Normal Inspection (Master Table). 2

� Table II-B. Single Sampling Plans for Tightened Inspection (Master Table). 3

� Table II-C. Single Sampling Plans for Reduced Inspection (Master Table). 4

� Table III-A. Double Sampling Plans for Normal Inspection (Master Table). 5

� Table III-B. Double Sampling Plans for Tightened Inspection (Master Table). 6

� Table III-C. Double Sampling Plans for Reduced Inspection (Master Table). 7

� Table IV-A. Multiple Sampling Plans for Normal Inspection (Master Table). 8

� Table IV-A.(continued) 9

� Table IV-B. Multiple Sampling Plans for Tightened Inspection (Master Table). 10

� Table IV-B.(continued). 11

� Table IV-C. Multiple Sampling Plans for Reduced Inspection (Master Table). 12

� Table IV-C.(continued). 13

� Table V-A. Average Outgoing Quality Limit Factors for Normal Inspection (Single Sampling). 14

� Table V-A. Average Outgoing Quality Limit Factors for Tightened Inspection (Single Sampling). 15

� Table VIII. Limit Numbers for Reduced Inspection. 16

*) Farnum, Nicholas R. 1994. Modern Statistical Quality Control and Improvement. Wadsworth, Inc., California.

ii

Tahapan Implementasi MIL-STD-105E1. Tentukan AQL (Acceptable Quality Level) berdasarkan perjanjian produsen dan pelanggan.

2. Tetapkan modus dan tingkat inspeksi (jika tidak, gunakan Normal Inspection, Level II ).

3. Tentukan ukuran lot (lot size).

4. Gunakan tabel Sample Size Code Letters untuk memilih huruf kode yang sesuai.

5. Tetapkan tipe prosedur pengambilan sampel : single, double, atau multiple sampling.

6. Gunakan tabel yang berkaitan dengan prosedur pengambilan sampel terpilih (tahap 5) dan modus/tingkat inspeksi (tahap 2) untuk mendapatkan ukuran sampel

dan angka penerimaan (Ac) serta angka penolakan (Re). Dalam kasus dimana suatu rancangan tidak ada untuk ukuran lot dan AQL-nya, hati-hati mengikuti

tanda panah dalam tabel ke rancangan terdekat yang ada.

7. Mulailah gunakan rancangan tersebut dan catat penerimaan dan penolakan sehingga switching rule dapat diterapkan. Jika switching dilakukan, tentukan modus

dan tingkat dan ulangi tahap 4-6 untuk mendapatkan rancangan pengambilan sampel yang baru.

SWITCHING RULE for MIL-STD-105E• Dari Normal ke Tightened Inspection : setelah 2 lot ditolak dari 2, 3, 4, atau 5 lot berurutan

• Dari Tightened ke Normal Inspection : setelah 5 lot berurutan diterima

• Dari Normal ke Reduced Inspection : jika (i) 10 lot berurutan diterima, dan (ii) jumlah total nonconforming items dalam 10 lot tersebut tidak melebihi batas

pada Table VIII. Limit Numbers for Reduced Inspection., dan (iii) produksi stabil/mantap, dan (iv) disetujui oleh otoritas

yang bertanggungjawab.

• Dari Reduced ke Normal Inspection : jika (i) suatu lot tunggal ditolak, atau (ii) suatu lot hanya sebagian dapat diterima (dhi. jumlah nonconforming items

diantara angka diterima dan ditolak), atau (iii) produksi menjadi tidak stabil, atau (iv) kondisi-kondisi lain yang

menjamin bahwa inspeksi Normal dapat dilakukan.

1

Table I. Sample-Size Code Letters.

Lot or batch sizeSpecial Inspection Levels General Inspection Levels

S-1 S-2 S-3 S-4 I II III

2 to 89 to 1516 to 25

AAA

AAA

AAB

AAB

AAB

ABC

BCD

26 to 5051 to 9091 to 150

ABB

BBB

BCC

CCD

CCD

DEF

EFG

151 to 280281 to 500501 to 1,200

BBC

CCC

DDE

EEF

EFG

GHJ

HJK

1,201 to 3,2003,201 to 10,00010,001 to 35,000

CCC

DDD

EFF

GGH

HJK

KLM

LMN

35,001 to 150,000150,001 to 500,000500,001 and over

DDD

EEE

GGH

JJK

LMN

NPQ

PQR

2

Table II - A. Single Sampling Plans for Normal Inspection (Master Table).

Samplesizecodeletter

Samplesize

Acceptable Quality Levels (normal inspection)

0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000

Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re

A

B

C

2

3

5 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

7 8

5 6

7 8

10 11

7 8

10 11

14 15

10 11

14 15

21 22

14 15

21 22

30 31

21 22

30 31

44 45

30 31

44 45

D

E

F

8

13

20 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

7 8

5 6

7 8

10 11

7 8

10 11

14 15

10 11

14 15

21 22

14 15

21 22

21 22

30 31

30 31

44 45

44 45

G

H

J

32

50

80 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

7 8

5 6

7 8

10 11

7 8

10 11

14 15

10 11

14 15

21 22

14 15

21 22

21 22

K

L

M

125

200

315 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

7 8

5 6

7 8

10 11

7 8

10 11

14 15

10 11

14 15

21 22

14 15

21 22

21 22

N

P

Q

500

800

1250 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

7 8

5 6

7 8

10 11

7 8

10 11

14 15

10 11

14 15

21 22

14 15

21 22

21 22

R 2000 1 2 2 3 3 4 5 6 7 8 10 11 14 15 21 22

= Use first sampling plan below arrow. If sample size equals or exceeds lot or batch size, do 100 percent inspection. Ac = Acceptance number.= Use first sampling plan above arrow. Re = Rejection number.

3

Table II - B. Single Sampling Plans for Tightened Inspection (Master Table).


Samplesize

Acceptable Quality Levels (tightened inspection)

0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000


A

B

C

2

3

5 0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

8 9

5 6

8 9

12 13

8 9

12 13

18 19

12 13

18 19

27 28

18 19

27 28

41 42

27 28

41 42

D

E

F

8

13

20 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

8 9

5 6

8 9

12 13

8 9

12 13

18 19

12 13

18 19

18 19

27 28

27 28

41 42

41 42

G

H

J

32

50

80 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

8 9

5 6

8 9

12 13

8 9

12 13

18 19

12 13

18 19

18 19

K

L

M

125

200

315 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

8 9

5 6

8 9

12 13

8 9

12 13

18 19

12 13

18 19

18 19

N

P

Q

500

800

1250 0 1

0 1

0 1

1 2

1 2

2 3

1 2

2 3

3 4

2 3

3 4

5 6

3 4

5 6

8 9

5 6

8 9

12 13

8 9

12 13

18 19

12 13

18 19

18 19

R

S

2000

3150

0 1

1 2

1 2 2 3 3 4 5 6 8 9 12 13 18 19


4

Table II - C. Single Sampling Plans for Reduced Inspection (Master Table).


Samplesize

Acceptable Quality Levels (reduced inspection)�

0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000


A

B

C

2

2

2 0 1

0 1

0 1

0 2

0 2

1 3

1 2

1 3

1 4

2 3

2 4

2 5

3 4

3 5

3 6

5 6

5 6

5 8

7 8

7 8

7 10

10 11

10 11

10 13

14 15

14 15

14 17

21 22

21 22

21 24

30 31

30 31

D

E

F

3

5

8 0 1

0 1

0 1

0 2

0 2

1 3

0 2

1 3

1 4

1 3

1 4

2 5

1 4

2 5

3 6

2 5

3 6

5 8

3 6

5 8

7 10

5 8

7 10

10 13

7 10

10 13

10 13

14 17

14 17

21 24

21 24

G

H

J

13

20

32 0 1

0 1

0 1

0 2

0 2

1 3

0 2

1 3

1 4

1 3

1 4

2 5

1 4

2 5

3 6

2 5

3 6

5 8

3 6

5 8

7 10

5 8

7 10

10 13

7 10

10 13

10 13

K

L

M

50

80

125 0 1

0 1

0 1

0 2

0 2

1 3

0 2

1 3

1 4

1 3

1 4

2 5

1 4

2 5

3 6

2 5

3 6

5 8

3 6

5 8

7 10

5 8

7 10

10 13

7 10

10 13

10 13

N

P

Q

200

315

500 0 1

0 1

0 1

0 2

0 2

1 3

0 2

1 3

1 4

1 3

1 4

2 5

1 4

2 5

3 6

2 5

3 6

5 8

3 6

5 8

7 10

5 8

7 10

10 13

7 10

10 13

10 13

R 800 0 2 1 3 1 4 2 5 3 6 5 8 7 10 10 13


� = If the acceptance number has been exceeded, but the rejection number has not been reached; accept the lot, but reinstate normal inspection.

5

Table III - A. Double Sampling Plans for Normal Inspection (Master Table).Sample

sizecodeletter

Sample Samplesize

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000


A � � � � � � � � � �

B FirstSecond

22

24

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

17 2237 38

25 3156 57

C FirstSecond

33

36

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

17 2237 38

25 3156 57

D FirstSecond

55

510

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

17 2237 38

25 3156 57

E FirstSecond

88

816

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

17 2237 38

25 3156 57

F FirstSecond

1313

1326

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

G FirstSecond

2020

2040

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

H FirstSecond

3232

3264

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

J FirstSecond

5050

50100

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

K FirstSecond

8080

80160

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

L FirstSecond

125125

125250

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

M FirstSecond

200200

200400

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

N FirstSecond

315315

315630

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

P FirstSecond

500500

5001000

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

Q FirstSecond

800800

8001600

� 0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27

R FirstSecond

12501250

12502500

0 21 2

0 33 4

1 44 5

2 56 7

3 78 9

5 912 13

7 1118 19

11 1626 27


� = Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available).

6

Table III - B. Double Sampling Plans for Tightened Inspection (Master Table).Sample

sizecodeletter

Sample Samplesize

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000


A � � � � � � � �

B FirstSecond

22

24

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

15 2034 35

23 2952 53

C FirstSecond

33

36

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

15 2034 35

23 2952 53

D FirstSecond

55

510

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

15 2034 35

23 2952 53

E FirstSecond

88

816

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

15 2034 35

23 2952 53

F FirstSecond

1313

1326

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

G FirstSecond

2020

2040

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

H FirstSecond

3232

3264

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

J FirstSecond

5050

50100

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

K FirstSecond

8080

80160

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

L FirstSecond

125125

125250

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

M FirstSecond

200200

200400

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

N FirstSecond

315315

315630

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

P FirstSecond

500500

5001000

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

Q FirstSecond

800800

8001600

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

R FirstSecond

12501250

12502500

� 0 21 2

0 33 4

1 44 5

2 56 7

3 711 12

6 1015 16

9 1423 24

S FirstSecond

20002000

20004000

0 21 2


� = Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available).

7

Table III - C. Double Sampling Plans for Reduced Inspection (Master Table).Sample

sizecodeletter

Sample Samplesize

Cumulative

samplesize

Acceptable Quality Levels (reduced inspection) �

0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000


ABC �

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

�

D FirstSecond

22

24

� 0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

7 1218 22

11 1726 30

E FirstSecond

33

36

� 0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

7 1218 22

11 1726 30

F FirstSecond

55

510

� 0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

G FirstSecond

88

816

� 0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

H FirstSecond

1313

1326

� 0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

J FirstSecond

2020

2040

� 0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

K FirstSecond

3232

3264

� 0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

L FirstSecond

5050

50100

� 0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

M FirstSecond

8080

80160

� 0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

N FirstSecond

125125

125250

� 0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

P FirstSecond

200200

200400

� 0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

Q FirstSecond

315315

315630

� 0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

R FirstSecond

500500

5001000

0 20 2

0 30 4

0 41 5

0 43 6

1 54 7

2 76 9

3 88 12

5 1012 16

= Use first sampling plan below arrow. If sample size equals or exceeds lot or batch size, do 100 percent inspection.= Use first sampling plan above arrow.

Ac = Acceptance number.Re = Rejection number.� = Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available).� = If, after the second sample, the acceptance number has been exceeded, but the rejection number has not been reached, accept the lot, but reinstate normal inspection.

8

Table IV- A. Multiple Sampling Plans for Normal Inspection (Master Table).Sample

sizecodeletter

Sample Samplesize

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000

Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac ReABC �

��

++++++

�++++

�++++

�++++

�++++

�++++

�++++

�++++

�++++

�++

D FirstSecondThirdFourthFifthSixthSeventh

2222222

2468101214

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

4 1211 1919 2727 3436 4045 4753 54

6 1617 2729 3940 4953 5865 6877 78

E FirstSecondThirdFourthFifthSixthSeventh

3333333

36912151821

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

4 1211 1919 2727 3436 4045 4753 54

6 1617 2729 3940 4953 5865 6877 78

F FirstSecondThirdFourthFifthSixthSeventh

5555555

5101520253035

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

G FirstSecondThirdFourthFifthSixthSeventh

8888888

8162432404856

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

H FirstSecondThirdFourthFifthSixthSeventh

13131313131313

13263952657891

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

J FirstSecondThirdFourthFifthSixthSeventh

20202020202020

20406080

100120140

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

= Use first sampling plan below arrow (refer to continuation of table on following page, when necessary). If sample size equals or exceeds lot or batch size, do 100 percent inspection. = Use first sampling plan above arrow.� = Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available). Ac = Acceptance number. Re = Rejection number.++ = Use corresponding double sampling plan (or alternatively, use multiple sampling plan below, where available). # = Acceptance not permitted at this sample size.

9

Table IV- A. (continued).Sample

sizecodeletter

Sample Samplesize

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000

Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac ReK First

SecondThirdFourthFifthSixthSeventh

32323232323232

326496

128160192224

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

L FirstSecondThirdFourthFifthSixthSeventh

50505050505050

50100150200250300350

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

M FirstSecondThirdFourthFifthSixthSeventh

80808080808080

80160240320400480560

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

N FirstSecondThirdFourthFifthSixthSeventh

125125125125125125125

125250375500625750875

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

P FirstSecondThirdFourthFifthSixthSeventh

200200200200200200200

200400600800100012001400

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

Q FirstSecondThirdFourthFifthSixthSeventh

315315315315315315315

3156309451260157518902205

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

R FirstSecondThirdFourthFifthSixthSeventh

500500500500500500500

500100015002000250030003500

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 41 63 85 107 11

10 1213 14

0 53 86 108 13

11 1514 1718 19

1 74 108 13

12 1717 2021 2325 26

2 97 14

13 1919 2525 2931 3337 38

= Use first sampling plan below arrow (refer to continuation of table on following page, when necessary). If sample size equals or exceeds lot or batch size, do 100 percent inspection. = Use first sampling plan above arrow.� = Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available). Ac = Acceptance number. Re = Rejection number.

++ = Use corresponding double sampling plan (or alternatively, use multiple sampling plan below, where available). # = Acceptance not permitted at this sample size.

10

Table IV- B. Multiple Sampling Plans for Tightened Inspection (Master Table).Sample

sizecodeletter

Sample Samplesize

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000

Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac ReABC �

�++

++++

�++++

�++++

�++++

�++++

�++++

�++++

�++++

�++

D FirstSecondThirdFourthFifthSixthSeventh

2222222

2468101214

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33

3 1010 1717 2424 3132 3740 4348 49

6 1516 2526 3637 4649 5561 6472 73

E FirstSecondThirdFourthFifthSixthSeventh

3333333

36912151821

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 31 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33

3 1010 1717 2424 3132 3740 4348 49

6 1516 2526 3637 4649 5561 6472 73


5555555

5101520253035

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33


8888888

8162432404856

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33


13131313131313

13263952657891

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33


20202020202020

20406080

100120140

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33

= Use first sampling plan below arrow (refer to continuation of table on following page, when necessary). If sample size equals or exceeds lot or batch size, do 100 percent inspection. = Use first sampling plan above arrow.� = Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available). Ac = Acceptance number. Re = Rejection number.++ = Use corresponding double sampling plan (or alternatively, use multiple sampling plan below, where available). # = Acceptance not permitted at this sample size.

11

Table IV- B. (continued).Sample

sizecodeletter

Sample Samplesize

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000

Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac ReK First


32323232323232

326496128160192224

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33

L FirstSecondThirdFourthFifthSixthSeventh

50505050505050

50100150200250300350

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33


80808080808080

80160240320400480560

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33


125125125125125125125

125250375500625750875

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33


200200200200200200200

200400600800100012001400

� � # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33


315315315315315315315

3156309451260157518902205

� # 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33


500500500500500500500

500100015002000250030003500

# 2# 20 20 31 31 32 3

# 20 30 31 42 43 54 5

# 30 41 42 53 64 66 7

# 41 52 63 75 87 99 10

0 42 74 96 119 12

12 1414 15

0 63 97 12

10 1514 1718 2021 22

1 86 12

11 1716 2222 2527 2932 33

S FirstSecondThirdFourthFifthSixthSeventh

800800800800800800800

800160024003200400048005600

# 2# 20 20 31 31 32 3

12

Table IV- C. Multiple Sampling Plans for Reduced Inspection (Master Table).Sample

sizecodeletter

Sample Samplesize

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000


ABCDE �

��

�

++

�

++++

�++++

��

++++

��

++++

��

++++

��

++++

��

++++

��

++++

��

++++

��

++

��

��


2222222

2468101214

� # 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22


3333333

36912151821

� # 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22


5555555

5101520253035

� # 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22


8888888

8162432404856

� # 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22

K FirstSecondThirdFourthFifthSixthSeventh

13131313131313

13263952657891

� # 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22

= Use first sampling plan below arrow (refer to continuation of table on following page, when necessary). If sample size equals or exceeds lot or batch size, do 100 percent inspection. = Use first sampling plan above arrow.� = Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available). Ac = Acceptance number. Re = Rejection number.++ = Use corresponding double sampling plan (or alternatively, use multiple sampling plan below, where available). # = Acceptance not permitted at this sample size.� = If, after the final sample, the acceptance number has been exceeded but the rejection number has not been reached, accept the lot but reinstate normal inspection.

13

Table IV- C. (continued).Sample

sizecodeletter

Sample Samplesize

Cumulative

samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000

Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac Re Ac ReL First


20202020202020

20406080

100120140

� # 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22


32323232323232

326496

128160192224

� # 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22


50505050505050

50100150200250300350

� # 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22


80808080808080

80160240320400480560

� # 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22


125125125125125125125

125250375500625750875

� # 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22


200200200200200200200

200400600800100012001400

# 2# 20 20 30 30 31 3

# 2# 30 30 40 41 51 5

# 3# 30 40 51 61 62 7

# 30 40 51 62 73 74 8

# 40 51 62 73 84 96 10

# 41 62 83 105 117 129 14

0 51 73 95 127 13

10 1513 17

0 63 96 128 15

11 1714 2018 22

= Use first sampling plan below arrow (refer to continuation of table on following page, when necessary). If sample size equals or exceeds lot or batch size, do 100 percent inspection. = Use first sampling plan above arrow.� = Use corresponding single sampling plan (or alternatively, use double sampling plan below, where available). Ac = Acceptance number. Re = Rejection number.++ = Use corresponding double sampling plan (or alternatively, use multiple sampling plan below, where available). # = Acceptance not permitted at this sample size.� = If, after the final sample, the acceptance number has been exceeded but the rejection number has not been reached, accept the lot but reinstate normal inspection.

14

Table V-A. Average Outgoing Quality Limit Factors for Normal Inspection (Single Sampling) *

CodeLetter

Samplesize

Acceptable Quality Level

0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000

ABC

235 7.4

1218

172827

424639

696563

9711090

160150130

220220190

330310290

470490430

730720660

11001100

DEF

81320 1.8

2.84.6

4.26.56.9

11119.7

171516

242422

403433

565047

827273

120110

180170

270250

410

GHJ

325080 0.46

0.741.2

1.11.71.7

2.62.72.4

4.33.94.0

6.16.35.6

9.99.08.2

141312

211918

2929

46

KLM

125200315 0.12

0.180.29

0.270.420.44

0.670.690.62

1.10.971.00

1.61.61.4

2.52.22.1

3.63.33.0

5.24.74.7

7.57.3

12

NPQ

5008001250 0.029

0.0460.074

0.0670.110.11

0.170.170.16

0.270.240.25

0.390.400.36

0.630.560.52

0.900.820.75

1.31.21.2

1.91.8

2.9

R 2000 0.042 0.069 0.097 0.16 0.22 0.33 0.47 0.73

* Note: For the exact AOQL, the above volume must be multiplied by ��

��

��

sizeBatchorLotsizeSample1

15

Table V-B. Average Outgoing Quality Limit Factors for Tightened Inspection (Single Sampling) *

CodeLetter

Samplesize


0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000

ABC

235 7.4

1217

2827

424639

696563

97110100

160170160

260270250

400410390

620650610

9701100

DEF

81320 1.8

2.84.6

4.26.56.9

11119.7

171516

242426

404040

646162

9995

160150

240240

380

GHJ

325080 0.46

0.741.2

1.11.71.7

2.62.72.4

4.33.94.0

6.16.36.4

9.9109.9

161616

2525

39

KLM

125200315 0.12

0.180.29

0.270.420.44

0.670.690.62

1.10.971.0

1.61.61.6

2.52.62.5

4.14.03.9

6.46.2

9.9

NPQ

5008001250 0.029

0.0460.074

0.0670.110.11

0.170.170.16

0.270.240.25

0.390.400.41

0.630.640.64

1.00.990.99

1.61.6

2.5

RS

20003150

0.0180.027

0.042 0.069 0.097 0.16 0.26 0.40 0.62

* Note: For the exact AOQL, the above volume must be multiplied by ��

��

��

sizeBatchorLotsizeSample1

16

Table VIII. Limit Numbers for Reduced Inspection.

Number ofsample units


from last 10lots or batches 0.010 0.015 0.025 0.040 0.065 0.10 0.15 0.25 0.40 0.65 1.0 1.5 2.5 4.0 6.5 10 15 25 40 65 100 150 250 400 650 1000

20- 2930- 4950- 79

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙0

∙00

002

013

237

4714

81325

142240

223663

4063110

68105181

115178301

181277

80- 129130- 199200- 319

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙0

∙00

002

024

248

4714

71322

142540

244268

4272115

68115181

105177277

181301471

297490

320- 499500- 799800- 1249

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙0

∙00

002

024

137

4714

81424

142542

244068

3963105

68110181

113181

189

1250- 19992000- 31493150- 4999

∙∙∙

∙∙∙

∙∙∙

∙∙∙

∙∙0

∙00

001

024

248

4814

71424

132238

244067

4068111

69115186

110181

169

5000- 79998000- 1249912500- 19999

∙∙∙

∙∙0

∙00

002

024

247

3713

71424

142440

254269

4068110

63105169

110181

181

20000- 3149931500- 4999950000 & over

002

013

247

4814

81425

142440

223863

4067110

68111181

115186301

181

∙ Denotes that the number of sample units from the last ten lots or batches is not sufficient for reduced inspection for this AQL. In this instance more than ten lots or batches may be used for the calculation, provided that the lots orbatches used are the most recent ones in sequence, that they have all been on normal inspection, and that none has been rejected while on original inspection.

Tablas militares

Entertainment & Humor

Transcript of Tablas militares