Tabel besi Ispatindo
6
2/7/12 PT. Ispat Indo 1/6 www.ispatindo.com/Summar\_staitbar.htm Updated 08-Oct-2011 _ Contact _ Intro Page _ _ Straight Bars For Concrete Reinforcement Plain Rounds (in mm) : 16,17,18,19,20,21,22,23,24,25,26,27,28,29 Deformed Bars (in mm) : D16,D18,D19,D20,D22,D25,D28,D32 Compan\ Standard Grade Equivalent to % C % Mn % P Max % S Max % Si (C+Mn)/6 % UTS N/MM 2 Yield Strength N/mm 2 JIS G 3112/ASTM SD 295A/B 0.20/0.27 1.50 max 0.035 0.035 0.055 max - 440/600 295 min SD 345 0.27 max 1.60 max 0.035 0.035 0.055 max 0.50 max 490 min 345 to 440 SD 390 0.29 max 1.80 max 0.035 0.035 0.055 max 0.55 max 560 min 390 to 510 SD 490 0.32 max 1.80 max 0.035 0.035 0.055 max 0.60 max 620 min 490 to 625 Grade 40 0.27/0.34 0.60/0.90 0.050 0.050 0.035 max 0.37/0.49 48 Kg/mm 2 33 Kg/mm 2 Grade 60 0.28/0.33 1.15/1.35 0.045 0.045 0.035 max 0.47/0.55 56 Kg/mm 2 40 Kg/mm 2 Mechanical Properties of SNI Standart Steel Grade No. of Test Bars Tensile Test Bend Test Yield Kgf / MM 2 (N/MM 2 ) Tensile Kgf / MM 2 (N/MM 2 ) Elongation (%) Rounded Corner Arch Diameter BjTP 24 No. 2 Minimum 24 (235) Minimum 39 (380) 20 180 0 3 x d No. 3 24 BjTP 30 No. 2 Minimum 30 (295) Minimum 45 (440) 18 180 0 d > 16 = 3xd No. 3 20 d > 16 = 4xd No. 2 10 d <= 16 = 3xd
Transcript of Tabel besi Ispatindo
2/7/12 PT. Ispat Indo
1/6www.ispatindo.com/Summary_staitbar.htm
Updated 08-Oct-2011 | Contact | Intro Page | |
Straight Bars For Concrete Reinforcement
Plain Rounds (in mm) : 16,17,18,19,20,21,22,23,24,25,26,27,28,29
Deformed Bars (in mm) : D16,D18,D19,D20,D22,D25,D28,D32
Company Standard
Grade
Equivalent to % C % Mn
% P
Max
% S
Max% Si (C+Mn)/6 %
UTS
N/MM2
Yield Strength
N/mm2
JIS G 3112/ASTM
SD 295A/B 0.20/0.27 1.50 max 0.035 0.035 0.055 max - 440/600 295 min
SD 345 0.27 max 1.60 max 0.035 0.035 0.055 max 0.50 max 490 min 345 to 440
SD 390 0.29 max 1.80 max 0.035 0.035 0.055 max 0.55 max 560 min 390 to 510
SD 490 0.32 max 1.80 max 0.035 0.035 0.055 max 0.60 max 620 min 490 to 625
Grade 40 0.27/0.34 0.60/0.90 0.050 0.050 0.035 max 0.37/0.49 48 Kg/mm2 33 Kg/mm2
Grade 60 0.28/0.33 1.15/1.35 0.045 0.045 0.035 max 0.47/0.55 56 Kg/mm2 40 Kg/mm2
Mechanical Properties of SNI Standart
Steel Grade No. of Test Bars
Tensile Test Bend Test
Yield
Kgf / MM2
(N/MM2)
Tensile
Kgf / MM2
(N/MM2)
Elongation
(%)
RoundedCorner
Arch Diameter
BjTP 24No. 2 Minimum 24
(235)
Minimum 39
(380)
201800 3 x d
No. 3 24
BjTP 30No. 2
Minimum 30
(295)
Minimum 45
(440)
18
1800d > 16 = 3xd
No. 3 20 d > 16 = 4xd
No. 2 10 d <= 16 = 3xd
2/7/12 PT. Ispat Indo
2/6www.ispatindo.com/Summary_staitbar.htm
BjTP 30No. 2
Minimum 30
(295)
Minimum 45
(440)
10
1800d <= 16 = 3xd
No. 3 18 d > 16 = 4xd
BjTP 35
No. 2Minimum 35
(345)Minimum 50
(490)
18
1800
d >= 16 = 3xd
No. 3 2016<d<=40 = 4xd
d >= 40 = 5xd
BjTP 40No. 2
Minimum 40(390)
Minimum 57(500)
16
1800 5 x dNo. 3 18
BjTP 50No. 2
Minimum 50(490)
Minimum 57(620)
12
1800d <= 25 = 5xd
No. 3 14 d > 25 = 6xd
Back To Top
Note1. Bend test results should not be located on the outer side of the arch.
2. 1 Kgf / MM2 = 9.8 N/MM2
Low Carbon Steel Wire Rod
These standards are described for wire rods equivalent to JIS G 3505 and SAE / AISI. These may be used for fine wire, annealed wire, galvanized wire, nailwire, barbed wire, staple wire, rivet wire, etc.
Product range : 5.1 to 18 mm; Tolerance ± 0.30 mm on diameter (typical for 5.5 mm) as per all international standards.
Type of cooling : Stelmor type
Coil weight : Approx 1550 kg & 1000 kg or 3 coils of each 550 kg bundled together to weigh approx 1650 kg
Coil dimensions : ID : 850 mm; OD : 1250 mm
Company Standard as per JIS G 3505
GradeEquivalent
% C % Mn% PMax
% SMax
% SiUTS (Max)
N/mm2ElongMin %
TypicalEnd Use
1005 0.07 max 0.40 max 0.040 0.0400.10
max
400 35 Fine wire drawing
SWRM 6/1006 0.08 max 0.60 max 0.040 0.0400.15max
420 30 Binding wire, Annealed wire
SWRM 8/1008 0.10 max 0.60 max 0.040 0.0400.15
max440 25 Telegraph wire, nails
SWRM 10/1010 0.08/0.13 0.30/0.60 0.040 0.0400.20
max460 23 Galvanized wire, Barbed wire
SWRM 12/1012 0.10/0.15 0.30/0.60 0.040 0.0400.20
max510 22 Nail wire, Staple wire, wire mesh
SWRM 15/1015 0.13/0.18 0.30/0.60 0.040 0.0400.20max
520 21 Rivet wire
SWRM 22/1022 0.20/0.25 0.30/0.60 0.045 0.0450.25
600 20 Concrete Reinforcement
2/7/12 PT. Ispat Indo
3/6www.ispatindo.com/Summary_staitbar.htm
SWRM 22/1022 0.20/0.25 0.30/0.60 0.045 0.0450.25max
600 20 Concrete Reinforcement
Commercial 1020 0.3 max 1.50 max 0.050 0.0501.00max
- - Miscellaneous
Back To Top
Cold Heading Quality Steel Wire Rod
These specifications are described for wire fods equivalent to JIS G 3507.
Product range : 5.5 to 17 mm; Tolerance ± 0.30 mm on diameter (typical for 5.5 mm) as per all international standards.
Type of cooling : Retarded / stelmor type of cooling
Coil weight : Approx 1300 kg to 1500 kg
Coil dimensions : ID : 850 mm; OD : 1250 mm
Company Standard as per JIS G 3507
Grade
Equivalent to % C % Mn
% P
Max
% S
Max% Si
% Al
MinTypical End Use
SWRCH 6A 0.08 max 0.60 max 0.040 0.040 - 0.02
FastenersSWRCH 8A 0.10 max 0.60 max 0.040 0.040 - 0.02
SWRCH 18A 0.15/0.20 0.60/0.90 0.030 0.030 0.10 max 0.02
Back To Top
Welding Electrode Grades Steel Wire Rod
These specifications are described for wire rods as per JIS G 3503 or AWS standards used for core wire of mild steel electrodes for arc welding of
structural steels and Copper coated CO2 welding wire (MIG) for submerged gas welding.
Product range : 5.5, 6.0, & 6.5 mm (or any other agreed diameter) tolerance ± 0.30 mm of diameter
Type of cooling : Retarded / Stelmor type of cooling
Coil weight : 1550 kg approximately
Coil dimensions : ID : 850 mm; OD : 1250 mm
Company Standard as per JIS G 3503 or AWS
Grade
JIS G 3503
% C
Max% Mn
% P
Max
% S
Max
% Si
Max
% Cu
Max
Mechanical
PropertiesTypical End Use
SWRY11 0.09 0.35/0.65 0.020 0.023 0.03 0.20 UTS-430 N/mm2 MAX
%EL = 30 MINStick electrodes
CO2 Gas Welding Rod for MIG/TIG Wire
Grade
Equivalent to% C % Mn
% P
Max
% S
Max% Si
% Cu
Max
UTS Max
(N/mm2)
RA
Min %
2/7/12 PT. Ispat Indo
4/6www.ispatindo.com/Summary_staitbar.htm
Equivalent to% C % Mn
Max Max% Si
Max (N/mm2) Min %
ER-70-S4 0.040/0.10 1.00/1.35 0.025 0.025 0.50/0.70 0.10 520 80
ER-70-S6 0.040/0.10 1.00/1.70 0.025 0.025 0.85/1.05 0.10 (SG2) 550 75
EM 12K 0.060/0.12 0.80/1.20 0.025 0.025 0.05/0.35 0.15 (S2) 600 65
EM 12 0.06/0.12 0.8/1.20 0.025 0.025 0.05/0.1 0.15 550 65
Back To Top
High Carbon Steel Wire Rod
These specifications cover High Carbon steel wire rods as per JIS G 3506 and equivalent to AISI specifications for the manufacture of spring wire, ropewire, ACSR wire, wire for umbrella rib & cycle spoke, pre-stressed concrete wire, etc.
Product range : 5.5 to 13.0 mm diameter
Controlled cooling : Stelmor type
Coil weight : 1550 kg approximately
Coil dimensions : ID; 850 mm; OD: 1250 mm
Company Standard as per JIS G 3506
Grade % C % Mn % PMax
% SMax
% SiTypical UTS (5.5 mm dia)
N/mm2
Elong % Approx
Typicalend use
SWRH 27 0.24/0.31 0.40/0.60 0.030 0.030 0.15/0.30 565/695 16
Concrete nailWire for umbrella rib, Cycle spoke,
Motor cycle spoke
SWRH 32 0.29/0.36 0.40/0.60 0.030 0.030 0.15/0.30 600/715 15
SWRH 37 0.34/0.41 0.40/0.60 0.030 0.030 0.15/0.30 620/745 15
SWRH 42A 0.39/0.46 0.40/0.60 0.030 0.030 0.15/0.30 665/775 14
SWRH 42B 0.39/0.46 0.60/0.80 0.030 0.030 0.15/0.30 685/815 14
SWRH 47A 0.44/0.51 0.40/0.60 0.030 0.030 0.15/0.30 735/855 13
Crimping wire for bed spring.
Spring wire, rope wire, Tyre beadwire, ACSR wire, bale wire
SWRH 47B 0.44/0.51 0.60/0.80 0.030 0.030 0.15/0.30 755/875 13
SWRH 52A 0.49/0.56 0.40/0.60 0.030 0.030 0.15/0.30 825/945 13
SWRH 52B 0.49/0.56 0.60/0.80 0.030 0.030 0.15/0.30 845/965 13
SWRH 57A 0.54/0.61 0.40/0.60 0.030 0.030 0.15/0.30 860/970 12
SWRH 57B 0.54/0.61 0.60/0.80 0.030 0.030 0.15/0.30 880/980 12
2/7/12 PT. Ispat Indo
5/6www.ispatindo.com/Summary_staitbar.htm
SWRH 62A 0.59/0.66 0.40/0.60 0.030 0.030 0.15/0.30 920/1040 11
SWRH 62B 0.59/0.66 0.60/0.80 0.030 0.030 0.15/0.30 950/1070 11
SWRH 67A 0.64/0.71 0.40/0.60 0.030 0.030 0.15/0.30 960/1080 10
SWRH 67B 0.64/0.71 0.60/0.80 0.030 0.030 0.15/0.30 970/1090 10
SWRH 72A 0.69/0.76 0.40/0.60 0.030 0.030 0.15/0.30 1030/1150 9
Tire bead wire, spring wire, ropes PC
wire, PC strand, etc.
SWRH 72B 0.69/0.76 0.60/0.80 0.030 0.030 0.15/0.30 1050/1170 9
SWRH 77A 0.74/0.81 0.40/0.60 0.030 0.030 0.15/0.30 1090/1210 9
SWRH 77B 0.74/0.81 0.60/0.80 0.030 0.030 0.15/0.30 1120/1250 8
SWRH 82A 0.79/0.86 0.40/0.60 0.025 0.025 0.15/0.30 1140/1270 8
SWRH 82B 0.79/0.86 0.60/0.80 0.025 0.025 0.15/0.30 1170/1290 8
Similar grades of equivalent to SAE / AISI 1026, 1030, 1040, 1050, 1055, 1060, 1065, 1070, 1080 are also delivered.
Back To Top
2/7/12 PT. Ispat Indo
6/6www.ispatindo.com/Summary_staitbar.htm
