T7 SERIES TRACTORS140 to 240 Engine hpT7.175 I T7.190 I T7.210T7.230 I T7.245 I T7.260 I T7.270

TAKE CONTROL OF MORETHAN JUST YOUR TRACTOR

2 3

CLEANER, MORE PRODUCTIVE POWER T7 tractors boast New Holland's cutting-edge and award-winning ECOBlue™ Hi-eSCR (High-Efficiency Selective CatalyticReduction) engine technology for Tier 4B emissions compliance, with absolutely no change in operation. This means that T7 engines continue to “breathe” better and maintain the performance advantages you’ve come to expect from the T7 Series line. T7 tractors now boast higher rated engine horsepowers to further improve performance, and every T7 modelcomes standard with Engine Power Management (EPM), which provides additional horsepower in reserve, for optimizingyour productivity.

EXCEPTIONAL VISIBILITY AND DRIVING EASET7 Series tractors are designed to make operation even easier. The SideWinder™ II armrest reduces fatigue and increasesoperating comfort, while the Comfort Ride™ cab suspension provides a smooth, comfortable ride. The Horizon™ cab offersexceptionally low noise levels of just 69 decibels. You also get excellent all-around visibility. Optional wide-angle heated mirrors,which can be electronically adjusted from the comfort of the cab, eliminate awkward and potentially dangerous blind spots.

REDUCE YOUR OPERATING COSTSThe ECOBlue™ Hi-eSCR technology further reduces engine emissions and also maintains the low fuel consumption that you’vecome to expect from New Holland, that actually saves you money. Matched with the advanced Auto Command™ CVTtransmission, fuel use is up to 10% lower than comparable Tier 3 T7000 tractors. With a 600-hour engine service interval,T7 tractors set the standard for simple, less time-consuming maintenance.

T7 Series tractors offer unrivaled comfort, power, efficiency and precision. They let you take control of your operatingcosts by improving the efficiency of your operators, your field performance and your business. That’s New HollandSMART. New Holland T7 tractors deliver big productivity and top-of-the-line comfort and range from 110 PTO horsepowerto 210 PTO horsepower.

EXACTLY WHAT IT SAYS ON THE HOODA T7 tractor’s rated power is only part of thestory. Thanks to the performance of Tier 4BECOBlue™ Hi-eSCR engine technology andEngine Power Management, T7 tractors develop more torque and power as they are putunder load. To know the true power that’s underthe hood of your T7 tractor, just look on thehood. The three digits after “T7” refer to themaximum horsepower with Engine Power Management. You get peace of mind knowingyour T7 tractor will be able to handle even themost demanding applications.

THE T7 FAMILY 4-5HORIZON™ CAB 6-7CONTROLS 8-9PRECISION LAND MANAGEMENT 10-11ENGINE 12-13TRANSMISSIONS 14-17AXLES, TRACTION 18-19THREE-POINT HITCH, PTO 20-21HYDRAULICS, FRONT LOADERS 22-23SERVICE, ACCESSORIES 24-25SPECIFICATIONS 26-27

Max power with EPM [hp(CV)]

EPM band

Rated Power [hp(CV)] T7.175 140 T7.190 150 T7.210 165 T7.230 180 T7.245 200 T7.260 220 T7.270 240

T7.175 175 T7.190 190 T7.210 210 T7.230 230 T7.245 245 T7.260 260 T7.270 270

Hors

epow

er

EPM according to the load on transmission,PTO and hydraulics.

Engine Speed

These are maximum engine powersthat the T7 range can deliver formobile PTO and high speed haulingtasks.

Rated powers are a useful referencebut are usually surpassed by themax power figures during work,with or without EPM active.

EVEN MORE VERSATILITYThe seven-model T7 Series line-up provides a choice of engine power, hydraulic options and transmission choices for every application. An exceptionalpower-to-weight ratio gives these tractors exceptional versatility. Add the optionalfully integrated front three-point hitch and you have even more flexibility topower implements on front or back. With EPM now available in reverse and optional shuttle sensitivity control, T7 tractors do it all – from tillage to spraying,baling hay to transport, snow blowing to loader work

4 5 THE T7 FAMILY

SEVEN MODELS. THREE TRANSMISSIONS. COUNTLESS AWARDS.

You can specify your New Holland T7 tractor to match your specificbusiness needs. With rated engine power ranging from 140 horsepowerto 240 horsepower and PTO horsepower ranging from 110 horsepowerto 210 horsepower, the seven-model T7 Series line-up offers a choice ofsemi-powershift, full-powershift or continuously variable transmissions(CVT) with the T7.270 only available with the Auto Command™ CVT transmission. You can add a New Holland loader to any T7 model, and alsochoose the optional fully integrated front three-point hitch and PTO.

AN ARMREST TO SUIT YOUIf you choose a T7 tractor with a Range Command™ or Power Command™ transmission, you can specify either a classicarmrest or New Holland’s advanced SideWinder™ II armrest, complete with the CommandGrip™ multi-function controllerand IntelliView™ III or IV monitor. The SideWinder II armrest is standard on all models with electronic remotes. On tractorswith an Auto Command™ CVT transmission, the CommandGrip controller also controls speed and direction by pushingforward or pulling back.

CLASSIC ARMREST

SIDEWINDER™ II ARMREST

The T7.270 Auto Command™ tractor offers an exclusive Blue Powerstyling option. Blue Power is a distinctive midnight blue color, with silver wheels and chrome-colored grilles and exhaust shield.

The Blue Power T7.270 Auto Command™ also benefits from luxurycab features that provide superior operator comfort, as well as the industry-leading Auto Command™ CVT and ECOBlue™ HI-eSCRemissions technology for exceptional power efficiency and performance.

THE HORIZON™ CAB: THE PLACE TO GO FOR MORE SPACE, BETTER VISIBILITY

6 7 HORIZON™ CAB

New Holland tractors offer the smoothest, quietest, most spacious cabs in the business, and T7 Series tractors continue that tradition.

DESIGNED FOR COMFORT AND PRODUCTIVITYStep into a T7 Horizon™ cab, and you will find it has been designed to fit you perfectly. You’ll notice how the seat and steeringwheel adjust to suit you. All-round visibility is as good as it gets. Noise levels are exceptionally low, helping to reduce fatigue.Enjoy how the seat, cab and axle suspension cushion the ride. From air-conditioning to optional full automatic climate control, the Horizon cab keeps you comfortable.

FROM DUSK TO DAWNAll models are fitted with a full range of worklights as standard and can be set to match a broad range of applications for safer,more productive operation. A dedicated switch panel in the cab provides easy control. HID high-intensity Xenon lights are optional for round-the-clock operating efficiency.

AT 69.6 DECIBELS, T7 CABS

ARE

THE QUIETEST IN THEIR CLA

SS

CUSTOM HEADLAND MANAGEMENT The refined New Holland Custom Headland Management II system combines simple programmingand recall with the potential for advanced modificationto make it even easier to improve in-field efficiency.The system allows the operator to record and storethe sequence of operations at the headland, and playthe sequence back automatically with the push of abutton. To modify pre-programmed sequences, operators use the IntelliView™ IV display to fine tunethem to ensure they are right for every individual fieldand crop. It also helps reduce fatigue over extendedworking periods.

CONTROL CENTERAir conditioning controls, lighting panel, additional storage slotsand the radio are all grouped in an ergonomic cluster. A BluetoothRDS/MP3 radio is standard equipment. Not only can you takephone calls hands free, you can listen to your favorite music eitherfrom your MP3 player or USB flash drive.

EYES IN THE BACK OF YOUR HEADNew enlarged wing mirrors feature a top section thatyou can adjust electronically for the best possibleview of the road during high-speed transport. You canalso precisely position the lower section to removeblind spots. Want more? These mirrors are heated too,so no need for scraping!

THE MOST COMFORTABLE SEAT ON THE FARMComfort is guaranteed thanks to the deluxe air-suspension seat that comes as standard equipment.For operators who spend extended hours in the tractor,the enhanced comfort of the heated, semi-active AutoComfort™ seat is worth considering. It is fitted witha large air reservoir to counteract ground undulations,and when combined with the Comfort Ride™ cab suspension, it’s the smoothest ride ever. For an addedtouch of luxury, select the full leather option.

8 sec 5 sec 8 sec 5 sec

8 9 SIDEWINDER™ II ARMREST AND COMMANDGRIP™ CONTROLLER

INTELLIVIEW™ IV TOUCHSCREEN DISPLAY The IntelliView™ IV display is a large 10.4-inch touchscreendisplay that provides a single interface for fingertip adjustmentof key settings as well as compatibility with precision applications such as New Holland IntelliSteer™ auto guidanceand implement control using either PLM™ IntelliRate™ Controlor the PLM™ ISOBUS task controller.

SIDEWINDER™ II. THE ULTIMATEERGONOMIC FARMING EXPERIENCET7 Series tractors offer sophisticated features that are easy and intuitive to use. We listened to customers and developed the SideWinder™ II armrest to make everything simpler. All key controls are accessed from the armrest.Throttle, transmission and hydraulics. Everything you need to control.

• Custom Headland Management.Press to record, store and activateautomated headland turns.

The soft-touch buttons feature backlight technologyto make selecting controls in the dark even easier.

• Rear linkage raise/lower. To activate frontlinkage raise/lower, push the button on the rear of the CommandGrip controller simultaneously with the raise/lower function.

• Optional IntelliSteer™ auto guidance,automated steering engagement.

• Forward/reverse shuttle switch

• Fingertip control for up to tworemote valves

EASY ACCESS TO ADVANCED FEATURESPush the symbol. Activate the feature. The IntegratedControl Panel, ICP, makes it simple to access advanced operating features. No need to scrollthrough menus to set up TerraLock™ traction management, Custom Headland Management, Auto PTO or Engine Speed Management (ESM)

• Select paddle or joystick control for remote valves 3 and 4.

• Throttle up to your desired engine speed, select EngineSpeed Management, and the speed is fixed.

• Personalized positioning of the hydraulic joystick and rearlinkage mouse available as a factory-fit option.

As awarded by The Chicago Athenaeum: Museum of Architecture and Design.

• Electronic SideWinder™ II adjustment. Move the armrest to the position that suits you.

• Full access to more advanced controls under thepadded armrest.

•Electronic remotes. Easy-to-reach paddles provide fingertip hydraulic operation. Flow and timing can beadjusted through the IntelliView™ III/IV touch screen.

• Droop control. Select a lower maximum running speedfor the engine to save fuel.

• Automatically engage and disengage the front PTO instantly

• Auto PTO will disengage and reengage the PTO duringa headland turn.

• Three point hitch levelling and top link extension at thetouch of a button.

• Engage TerraLock and it will automatically managefour-wheel drive and differential lock selection.

• Press the Custom Headland Management button torecord and replay the functions you use most frequently.

• Multi-function joystick. The joystick can be set to operate the front linkage, or remote valves.

10 11 PRECISION LAND MANAGEMENT

T7 Series tractors are designed to make full use of New Holland Precision Land Management technology,allowing you to dramatically improve operator performance and comfort—all at the touch of a button.

ALL WIRED UP AND READY FOR YOUR CHOSEN GUIDANCE SYSTEMYou can specify your T7 Series tractor with a fully integrated New Holland-designed and developed IntelliSteer™ automatic steering system. The system uses DGPS or RTK technology to help ensure parallel pass-to-pass accuracy as precise as =/- 1 inch (2.5 cm).

INTELLIVIEW™ IV TOUCHSCREEN DISPLAYThe IntelliView™ IV display provides a single display solution for controllingboth key tractor functions and running precision applications such as IntelliSteer™ auto guidance, as-applied mapping and implement controlusing PLM™ IntelliRate™ Control and the PLM ISOBUS task controller. It allows you to program a variety of guidance patterns, personalize yoursettings and easily transfer information from your tractor to your FarmManagement Software.

INTEGRATED CONTROL SYSTEMSThe New Holland IntelliSteer™ System uses built in T3 terrain compensated correction signals (roll,pitch, yaw) to keep the Navigation Controller II informed of the tractor's orientation. Also integratedinto the hydraulic system is a control valve whichconverts the signals from the Navigation ControllerII into hydraulic movements of the steering system.

* Using RTK correction signal.

FULLY INTEGRATED INTELLISTEER™ GUIDANCEYour guidance system choice depends on your intended applications.All T7 Series tractors can be factory-fitted with IntelliSteer™ auto guidancemaximizing your operating efficiencies and productivity.

INTELLISTEER™ AUTO GUIDANCE. MAXIMIZING EFFICIENCY AND PRODUCTIVITY

ON AND OFF SIMPLICITYA single button on the CommandGrip™ controller activates the IntelliSteer system.It doesn’t get easier than that.

NH 372 GNSS RECEIVERThis receiver is GLONASS enabled and has theability to track up to 44 satellites at any one time,greatly increasing your satellite coverage and uptime. It is compatible with WAAS, RangePoint™RTX™, OmniSTAR®, CenterPoint™ RTX™ or RTKcorrections. When using RTK for high-precisionsub-inch accuracy, an RTK radio mounts under thereceiver.

LEVELS OF ACCURACY AND REPEATABILITYNew Holland offers a wide range of accuracy options, allowing you to choosewhich accuracy level best fits your needs. IntelliSteer™ auto guidance givesprecise sub-inch accuracy and reliability using RTK.

RTK BASE STATIONFor the highest degree of accuracy, use an RTK basestation that broadcasts a correction signal that allowsyou to achieve a pass-to-passaccuracy of +/- 1 inch.

New Holland Precision Land Management (PLM™) offers a complete range of leadingedge solutions for managing all of your crop production needs that help improve efficiencies, control input cost and maximize your yields. Whatever job you want tohandle more precisely— steering your equipment with industry-leading accuracy,controlling rate and flow of inputs, optimizing water usage, staying connected withyour machines, controlling mixed fleets of implements with a single display solution,streamlining your field data into informed decisions—PLM offers a solution that youcan tailor to your needs.

+/- 2 to 4 in

3 4 5 615 20 25 30

+/- 6 to 8 in +/- 3 to 5 in

5 6 7 8 9 10

WAAS

15 20 25 30

+/- 6

RangePoint™RTX OmniSTAR® XP

+/- 3 to 5 in

5 6 7 8 9 10

OmniSTAR® G2 OmniSTAR® HP

+/- 1.5 in

0 1 2

Centerpoint™RTX™

+/- 1 in

0 1 2

Centerpoint™VRS™

+/- 1 in

0 1 2

RTK

12 13 ENGINE

Your T7 is powered by an ECOBlue™ Hi-eSCR (High Efficiency Selective Catalytic Reduction) Nef engine, which has been developed by New Holland’s sister company FPT Industrial.These engines, which comply with the even-more-stringent Tier 4B emissions norms, offer you four key benefits:

Performance: T7 engines continue to provide industry-leadingpower, torque, transient response and Engine Power Management. The ECOBlue ™ Hi-eSCR after-treatment systemenables the engine to breath clean, fresh air, therefore optimizingit's combustion, power and torque density.

Efficient operation: ECOBlue™ HI-eSCR is an after-treatmentsystem that does not interfere with or restrict the engine's performance, enabling it to maximize its efficiency and power. It does not require any exhaust gas to be recirculated through theengine and does not require regeneration of particulate filters.Total fluid consumption will be the same or better from equivalentTier 4A machines, and this system allows New Holland to continue leading the industry with 600-hour service intervals.

Simplicity: This is a single system solution with less complexity.Since no exhaust gas is recirculated through the engine, no additional cooling requirements are needed, allowing the engineto operate at peak efficiency, while optimizing power and torque.

Consistency: The New Holland system uses proven technologywith more than 35,000 machines working around the world, andrequires no change in tractor operation.

ECOBLUE™ HI-ESCR EXPLAINEDThis new system is an evolution of the existingECOBlue™ SCR system, and you will benefitfrom the highest NOx conversion efficiency in theindustry. This multi-patented system uses a newEngine Control Unit, which not only manages theengine, but also the Hi-eSCR after-treatment system by controlling the supply and dosingmodules. Using a dedicated closed-loop system,it continuously monitors the NOx levels in the exhaust gases, ensuring that during every cyclethe precise amount of DEF is injected to achieveNOx conversion of over 95%, all while guaranteeinglow fluid consumption.

THE POWER AND EFFICIENCY YOU’VE COME TOEXPECT FROM NEW HOLLAND.

Tier 4B (2014)

PM(g/kWh)

NOx(g/kWh)

Tier 4A (2013)

Tier 3 (2006)Tier 2 (2003)

Tier 1 (1996)

ENGINE POWER MANAGEMENTEngine Power Management (EPM) is a renownedNew Holland tractor feature. In short, the enginedevelops more power and torque according tothe load on the transmission, hydraulics and PTO.Now T7 tractors also feature EPM when driving inreverse, ideal when blowing snow or mowing.

SAVE FUEL TO REDUCE YOUR CARBONFOOTPRINTEmissions released from burning diesel are a significant contributor to a farm’s overall carbonfootprint. ECOBlue™ Hi-eSCR technology for Tier 4B compliance reduces NOx emissions andmaintains the T7 Series’ impressive fuel efficiency,bringing about a substantial cut in your farm’s carbonemissions. Visit www.carbonid.newholland.comto find out how much carbon you could save!

Hors

epow

er

EPM according to the load on transmission, PTO and hydraulics.

ENGINE SPEED MANAGEMENTIn applications where a constant PTO speed is required, just select Engine Speed Management. This ensuresthe speed you select is accurately maintained even under changing loads. In many applications, this allowsyou to maintain a fixed forward speed in difficult terrain.

Engine speed

50hp

POWERED BY FPT INDUSTRIALNew Holland is not going it alone when it comes to Tier 4 technology. They can draw on the experience of their in-houseengine development group: FPT Industrial.

Pioneers: Fiat invented Common Rail technology in the1980s. They were the very first to introduce it on agriculturalmachines on the TS-A tractor. Pioneering. Always.

Cleaner: Fiat Industrial has topped the Dow Jones Sustainability World and Europe indexes for the Industrial Engineering sector for two consecutive years.

Proven: FPT Industrial has pioneered SCR technology since1995 and has already produced over 350,000 SCR enginesduring the last six years for the agricultural, construction andtrucking industries. The award-winning Hi-eSCR solution hasbeen extensively tested and has clinched numerous awards.

POWERTRAIN TECHNOLOGIES

14 15 RANGE COMMAND™ AND POWER COMMAND™ TRANSMISSIONS

PUSH-BUTTON SIMPLICITY. YEARS OF PROVEN TECHNOLOGYThe rugged and proven Range Command™ transmission allows you to make clutch-free gear changes withineach working range. It’s the ideal choice for general farm applications. The Power Command™ transmissionis a full-powershift that allows you to select the gear speed you want by simply pushing upshift or downshiftbuttons. An optional shuttle-controlled electronic park brake enables you to use the shuttle lever to secure thetractor when neutral is selected. Only New Holland offers such a simple and secure transmission choice.

A

B

C

0 1010 2020 30 40 50

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

26

23.9

19.8

16.8

14

11.6

9.7

8.2

6.8

5.8

4.8

4.0

3.3

2.8

2.3

1.9

1.6

1.3

1.1

7.5

6.2

5.3

4.4

3.6

3.0

(1725rpm)

A

B

C

0 1010 2020 30 40 50

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

26

23.9

19.8

16.8

14

11.6

9.7

8.2

6.8

5.8

4.8

4.0

3.3

2.8

2.3

1.9

1.6

1.3

1.1

7.5

6.2

5.3

4.4

3.6

3.0

(1725rpm)

Range Command™ Transmission* Power Command™ transmission*

*T7.210 19x6 25 mph ECO model shown with 18.4 838 tires fitted.

Reverse ForwardReverse Forward

SEMI-POWERSHIFT UP TO T7.210,FULL POWERSHIFTFROM T7.175 TO T7.260Both the Range Command andPower Command transmissions arebased around the same gear offering.For either transmission, you canchoose a standard 25-mph 18x6 orone of two optional, extra-high-ratio19x6 transmissions—the Economy19x6 that delivers 25 mph at a reduced engine speed or the FastMover transmission for 31-mph transport speed.

mph mph

WORK TOGETHER: AUTOMATION, COMFORTAND PRODUCTIVITY Using the Auto Transport and Auto Field modes reduces the effort of operating the tractor over a longworking day. These modes are easy to both set upand use. With Auto Transport, the tractor shifts seamlessly through ratios like an automatic transmission. It even senses if the tractor is beingpushed by a loaded trailer when descending a hilland holds the current gear to provide engine braking.The Auto Field mode manages both the enginespeed and transmission to optimize performanceand economy. In PTO applications, where a constantengine speed is the priority, the system selects thetransmission ratio to match the load on the engine. In draft applications when the tractor is under load, Auto Field allows engine speed to drop to take fulladvantage of the available torque rise before selectinga lower ratio.

SMOOTHER SHIFTING IN FIELD AND TRANSPORTThe IntelliShift™ gear change management system delivers smooth gear changes all day long. It analyzestransmission load, speed and transmission oil temperature ensuring that your T7 Series tractor delivers a seamless powershift between each andevery ratio

EASY SHUTTLE Operating the clutchless forward/reverse shuttle iseasy. A fingertip shuttle lever is located to the left ofthe steering column. You can also control shuttlingwith the CommandGrip™ controller on T7 tractorsequipped with the SideWinder™ II armrest, and program the transmission to automatically managetransmission shifts during a direction change. A shuttle-controlled electronic park brake is standardon T7 tractors with the AutoCommand CVT transmissionand an option on other T7 tractors. It allows you touse the shuttle lever to secure the tractor when neutral is selected.

ENGINE P

OWER CU

RVE

AUTOMATED SHIFT POINT

GEAR

CHA

NGE

ENGI

NE S

PEED

OPTI

MUM

ENG

INE

SPEE

D

HIGH TOLERANCE LOW TOLERANCE

0 3 6 9 12 15 18 21 24 27 31

16 17 AUTO COMMAND™ CVT TRANSMISSION

Designed and built by New Holland, the multi-award-winning Auto Command™ continuously variable transmission (CVT)has reached an important milestone, with more than 10,000 transmissions built. The Auto Command transmission benefitsfrom four direct drive points with 100% mechanical efficiency. These points have been precision engineered to ensurethey perfectly match the most frequently used speeds during heavy draft work, secondary cultivation, high-speed transportand high-speed field work, such as baling or mowing. Advanced, double-clutch control further enhances efficiency.Quite simply, it is the smoothest and most productive CVT around.

INNOVATIVE AUTO COMMAND™ TRANSMISSION OFFERS ADVANCED NEW HOLLAND FEATURES

• The transmission responds to how you move the CommandGripcontroller. Move the lever slightly and the transmission acceleratesgradually. Move the lever further forward and the system “readsyour mind” and accelerates quickly. A switch on the SideWinder IIconsole allows you to program this force-based system to matchyour preference.

• 4 DRIVING MODES TO SUIT YOUR DRIVING STYLE• Auto Mode. Select the desired target speed and Auto Command

will match the engine and transmission to maintain it.• Cruise Mode. When you achieve a desired operating speed,

use the Cruise Mode to set and maintain that speed for economy and productivity.

• Manual Mode. Allows you to set a required engine andforward speed.

• PTO mode. As soon as the PTO is engaged, Auto Command will operate to guarantee a constant engine speed.

• Target speed adjustment – set a target speed to match your exactneeds. Perfect when moving between fields or when crop yieldshave changed.

• Target speed selection – allows you to define three target speedsthat you can recall whenever you need them.

A SPEED FOR EVERY NEEDThe Auto Command transmission allows you to set a targetspeed between 0.01 mph right through to 31 mph. No steps.No range changes. Just seamless speeds to match yourevery need.

mph

Speed diagram

forward

MAKING THE MOST OF AVAILABLE TORQUENew Holland developed Auto Command transmissions totake advantage of the low running speed and high torqueof New Holland engines. With the 31-mph Economytransmission, the engine runs at a fuel efficient 1550 rpm.

Engi

ne s

peed

at 3

1 m

ph (r

pm)

1500

1400

1300

1600

1550

1650

17001700

New T7 Competitor A Competitor B

* on

ly T

7.22

0 - T

7.27

0 m

odel

s

UP TO 10% ENGINE

SPEED REDUCTION

FOR GREATER FUEL

ECONOMY*

1 2 3

ACTIVE STOPSTARTA key safety feature of the Auto CommandCVT transmission is Active StopStart. When the tractor comes to a standstill, the transmission prevents the tractor from movingbackward or forward, even with a heavy load,so there’s no risk of roll back on steep inclines.For safe parking, you can easily engage anelectronic brake using the shuttle lever.

BALANCING FUEL ECONOMY AND PRODUCTIVITYWhen working in Auto and Cruise modes, use the droop control button located to your right to reduce the engine speed neededto achieve maximum travel speed. The result: you reach 31 mphat much lower engine revolutions, saving you fuel. In PTO mode,you can regulate the acceptable reduction in PTO speed beforeforward speed is reduced. Perfect when operating in a field ofuneven soil types with areas of compaction.

18 19 AXLES & TRACTION

T7 Series tractor axle strength and weight increase with engine power to ensure a good power-to-weight ratioon all models, not just those with highest rated power output.

ADVANCED TRACTION MANAGEMENTThe New Holland TerraLock™ system is well established. The operator simply selects the traction packageneeded for a specific application. TerraLock will then engage and release the differential locks automatically.During a headland turn or moving from work to transport, TerraLock will ensure the differentials and four-wheeldrive are unlocked without operator intervention.

FASTER TURNS. BETTER TRACTION. GREATER PERFORMANCE

More Productivity

LESS TIME TURNING BOOSTS YOUR PRODUCTIVITYNew Holland leads the field in reducing the time it takes to make a headland turn. Offering a tight, unmatched65-degree turn angle, the SuperSteer™ front axle option delivers row-crop agility, beating any tractor in itsclass. The Fast Steer™ system, an option available on all T7 Series tractors regardless of axle type, allows youto make a full “lock-to-lock” turn more quickly and with minimal effort. You simply hold down the Fast Steer innersteering rim and you transform the steering wheel into a proportional “joystick.”

SUPERSTEER +

FAST STEER =

FASTER TURNS

vibration at seat base

TERRAGLIDE™ FRONT AXLE AND COMFORT RIDE™ CAB SUSPENSION. YOUR COMFORT PARTNERS.The automatic two-stage Comfort Ride™ cab suspension system provides proven operator comfort. It’s designed tocomplement the cushioned ride offered by the standard air-suspension seat to reduce fatigue. The TerraGlide™ frontaxle suspension is another New Holland innovation that smoothes your ride and increases control. It is recommendedfor operations that include fast field work and extended transport duties. The TerraGlide system, with integral hubbraking, is standard on tractors specified with a 31-mph transmission.

ANTI-LOCK BRAKING SYSTEM (ABS)THE FIRST CONVENTIONAL TRACTOR AVAILABLE WITHANTI-LOCK BRAKESTransport tasks become more demanding as tractor speed andhorsepower increase. New Holland is proud to offer the added brakingcontrol and safety of ABS (Anti-lock Braking System) as an option onmodels T7.230 and larger equipped with the Sidewinder II armrest.ABS prevents the wheels from locking up and causing skidding, allowing you to maintain steering control. It provides straight-linebraking, even when left and right wheels are on different surfaces,and enables you to brake hard while steering around obstacles.

Soil damage throughsmearing with independent braking

Minimum soil disturbance with ABS SuperSteer™

ABS SUPERSTEER™ OPTIONWith the ABS SuperSteer™ option, you receive the tight turning radius of the SuperSteer axle, but with the comfort of usingthe TerraGlide™ front axle suspension. Independent brakes are often used to help tractors turn tighter, but this often appliesstress to the driveline and causes the wheels to lock, resulting in smearing and soil damage. The ABS SuperSteer™ optionharnesses independent braking to reduce the turning radius without driveline stress or soil damage. ABS SuperSteer operatesin two modes:

• Steering Wheel Mode – The driver steers normally, but as the driver turns, the inside wheel brake will be applied usinga sensor that ensures the wheel is always rotating and avoiding soil damage

• Brake Pedal Mode – The driver presses the wings on the brake pedal to activate independent braking, but the wheelrotation will be monitored and brake pressure regulated to avoid wheel lock up

NEW HOLLAND T7 WITH ABS

BRAKING POINT

TRACTOR WITHOUT ABS

20 21 PTO AND FRONT/REAR THREE-POINT HITCH

FEATURES TO BOOST YOUR PRODUCTIVITY

POWER IMPLEMENTS ON FRONT OR BACKNew Holland T7 Series tractors are available witha fully integrated, factory-fitted front three-pointhitch and PTO, giving you the versatility to operatefront-mounted implements. All controls are fully integrated into the armrest and can be programmedto operate with the Custom Headland Managementsystem. When the front hitch is not in use, the linkage arms fold up or can be used to carry thefull standard weight pack.

AUTO PTO OPERATIONSelect Auto PTO and the PTO is automatically disengaged as the rear orfront linkage is raised above a pre-setposition. This protects the PTO shaftand tractor. The system re-engagesthe PTO as the linkage is lowered.

DIRECT DRIVE FOR FUEL EFFICIENCYAll T7 tractors are fitted with a direct drive PTO to minimize power loss between engineand implement. The PTO is engaged via a push-pull control, with advanced Soft Startmanagement. This modulates engagement of high inertia attachments to protect the driveline. Four speeds: 540, 540E, 1000 and 1000E are available. Models T7.230through T7.270 with Auto Command™ CVT transmissions can be ordered with1000/1000E shiftable PTO.

STRONG, EFFICIENT AND POWERFULThe maximum lift capacity on T7.175 to T7.210 tractors is 12,185 lbs., climbing to 12,787 lbs. on theT7.230 and above. The rear linkage and hydraulics aredesigned to work with heavy mounted equipment overextended periods. The system also incorporates integral dynamic ride control shock load protection.This will reduce bounce when travelling with a heavylinkage load at transport speeds. Fender-mountedcontrols for the rear linkage, a rear remote and thePTO are available.

22 23 HYDRAULICS AND FRONT LOADERS

HYDRAULIC POWER TO MEET YOUR DEMANDS

CLOSED-CENTER LOAD-SENSING HYDRAULICSHydraulic efficiency makes an important contribution to the overall performance of the tractor. T7.175 to T7.210 models arefitted with a hydraulic pump that delivers 33 or 37 gallons per minute (gpm). A 32- or 39-gpm pump is used on the T7.230and larger models. T7 tractors equipped with the Auto Command™ CVT transmission benefit from a priority valve that guarantees optimum steering response in demanding hydraulic applications. For T7 models with the Range Command orPower Command transmission, a separate 17-gpm pump takes care of the steering. Full hydraulic power is always available at the remote valves and lift linkage, but only as much as is needed. The variable displacement pump only workson demand, which reduces fuel consumption.

ELECTRONIC OR MECHANICAL - YOU DECIDEThe Classic armrest incorporates mechanical controls for the remote valves. The SideWinder™ II armrest features electroniccontrols, with two controls located on the CommandGrip™ handle for extra-easy use. A hydraulic control joystick is optionaland can be set to operate front or rear valves.

ADJUST THE FLOW ON UP TO NINE REMOTESEach electronic remote valve fitted on SideWinder™ II tractors features individual flow control. You can adjust the hydraulicflow and timing to each valve individually by using simple “pop-up” menus on the IntelliView™ IV touchscreen display.

All T7 models fitted with the Classic armrest boast up to four deluxe mechanical rear remote valves. Models equipped withthe SideWinder II armrest benefit from up to five electro-hydraulic rear remotes. All models in the T7 range offer up to threemid-mount valves.

CLASSIC ARMREST SIDEWINDER™

II ARMREST

PURPOSE DESIGNED FOR PRODUCTIVITYThere’s a New Holland loader designed specifically for each T7 Series tractor. TheNew Holland 855TL front loader is available for T7 standard wheelbase models(T.175 to T7.210) and the 865TL and 875TL front loaders fit the T7 long-wheelbasemodels (T7.230 to T7.270). From the operator’s seat, visibility to the loader is excellent both when the loader is at ground level and when raised progressively toits full lift height—all thanks to the optional high-visibility roof panel of T7 Seriestractors. This is an important design advantage of both the tractor and loader anda key to achieving maximum productivity and faster cycle times.

MOVE BIG LOADS FAST

MAXIMUMVISIBILITY

FRONT LOADER SPECIFICATIONS 855TL 865TL 875TL

Loader type Mechanical self-leveling Mechanical self-leveling Mechanical self-leveling

Tractor models T7.175, T7.190, T7.230, T7.245, T7.230, T7.245, T7.210 T7.260, T7.270 T7.260, T7.270

Capacity Measured per ASAE S301.3Lift capacity to max. height @ 800 mm lb. 5522 4774 6248Breakout force @ 800 mm lb. 5742 5434 7150Max. lift height in. 165 177 194Dump clearance in. 127 139 157Reach at max. lift in. 31.5 32.3 28.8Bucket dump angle degrees 52 53 51Reach @ ground level in. 108.4 113.1 117Bucket rollback angle degrees 44 43 42Digging depth in. 6.3 6.3 6.7

NOTE: Loader specifications may vary based on tractor model, tire size, etc.

24 25 SERVICE

T7 Series tractors are designed to spend more time working and less time inthe yard. All service points are easy to access, and super long service intervalsmean they will spend more time in their natural environment: the field!

360° SERVICE: T7

• The engine air filter is easyto check, clean or replace,with no need for tools.

• Engine oil check and fill points are easyto reach, with no need to lift the hood.This makes routine checks faster andservicing simpler. You also enjoy the long600-hour service intervals that you’vecome to expect from New Holland.

• Hydraulic oil levelscan be viewed viasight glass at therear of the tractor.

• The filler neck on the 13-gallon AdBlue®

tank is narrower than that of the standardfuel tank to prevent inadvertent fillingwith fuel. It only needs to be filled onceevery two refills of the fuel tank.

• Single-piece enginehood opens wide for fullservice access

• Cooling package opensout to make cleaningfaster and easier.

WILL I BE ABLE TO FIND ADBLUE®/DEF EASILY?The answer is yes! AdBlue® diesel exhaust fluid is availablethrough CNH Industrial Parts & Service. Just contact yourlocal dealer for more information. You can even have AdBluedelivered direct to your doorstep for absolute convenience.

AdBlue®/DEF

DEALER INSTALLED ACCESSORIESA comprehensive range of approved accessories to optimize machine performance in all conditions can be supplied andfitted by your dealer.

26 27 SPECIFICATIONSMODELS T7.175 T7.190 T7.210 T7.230 T7.245 T7.260 T7.270

Armrest type

New Holland Engine* Nef Nef Nef Nef Nef Nef NefNo. of cylinders / Aspiration / Valves / Emission level 6/ T / 4 / Tier 4B 6/ T / 4 / Tier 4B 6/ T / 4 / Tier 4B 6/ T / 4 / Tier 4B 6/ T / 4 / Tier 4B 6/ T / 4 / Tier 4B 6/ WT / 4 / Tier 4BSelective Catalytic Reduction (SCR) system Fuel system - high pressure common rail Bore and stroke in (mm) 4.09 x 5.20 (104 x 132) 4.09 x 5.20 (104x132) 4.09 x 5.20 (104x132) 4.09 x 5.20 (104x132) 4.09 x 5.20 (104x132) 4.09 x 5.20 (104x132) 4.09 x 5.20 (104x132)Max. EPM horsepower - ISO TR14396- ECE R120 hp[CV] (kw) 175 (130) 190 (142) 210 (157) 230 (172) 245 (183) 260 (194) 270 (201)Rated horsepower - ISO TR14396- ECE R120 hp[CV] (kw) 140 (104) 150 (112) 165 (123) 180 (134) 200 (149) 220 (164) 240 (179)Rated PTO horsepower - hp[CV] (kw) 110 (82) 120 (89) 135 (101) 150 (112) 170 (127) 190 (142) 210 (157)at rated engine speed per SAERated engine speed (rpm) 2200 2200 2200 2200 2200 2200 2200Viscous coupled cooling fan Reversible fan O O O O O O OExhaust brake O O O O O O ODiesel tank capacity gal (Liters) 71.3 (270) 71.3 (270) 71.3 (270) 104 (395) 104 (395) 104 (395) 104 (395)DEF/AdBlue® tank capacity gal (Liters) 13 (48) 13 (48) 13 (48) 13 (48) 13 (48) 13 (48) 13 (48)Service interval hours 600 600 600 600 600 600 600Range Command™ Transmission IntelliShift™ system – – – –Armrest type O O O – – – –Auto transmission functions – – – –Range Command™ semi-powershift (40 kph) O O – – – – –Number of gears / with creeper (F x R) 18 x 6 / 28 x 12 18 x 6 / 28 x 12 – – – – –Min. speed / Min. speed with creeper mph (kph) 1.5 / .25 (2.4 / 0.40) 1.5 / .25 (2.4 / 0.40) – – – – –Range Command™ semi-powershift (40kph ECO or 50 kph) O O O – – – –Number of gears / with creeper (F x R) 19 x 6 / 29 x 12 19 x 6 / 29 x 12 19 x 6 / 29 x 12 – – – –Min. speed / Min. speed with creeper mph (kph) 1.5 / .25 (2.4 / 0.40) 1.5 / .25 (2.4 / 0.40) 1.2 / .21 (2.0 / 0.34) – – – –Power Command™ Transmission IntelliShift™ system –Armrest type O O O O O O –Auto transmission functions –Power Command™ full-powershift (40 kph) O O O O O O –Number of gears / with creeper (F x R) 18 x 6 / 28 x 12 18 x 6 / 28 x 12 18 x 6 / 28 x 12 18 x 6 / 28 x 12 18 x 6 / 28 x 12 18 x 6 / 28 x 12 –Min. speed / Min. speed with creeper mph (kph) 1.2 / 0.2 (1.9 / 0.31) 1.2 / 0.2 (1.9 / 0.31) 1.1 / 0.18 (1.8 / 0.29) 1.2 / 0.2 (1.98 / 0.33) 1.2 / 0.2 (1.98 / 0.33) 1.2 / 0.2 (1.98 / 0.33) –Power Command™ full powershift (40 kph ECO or 50 kph) O O O O O O –Number of gears / with creeper (F x R) 19 x 6 / 29 x 12 19 x 6 / 29 x 12 19 x 6 / 29 x 12 19 x 6 / 29 x 12 19 x 6 / 29 x 12 19 x 6 / 29 x 12 –Min. speed / Min. speed with creeper mph (kph) 1.2 / 0.2 (1.9 / 0.31) 1.2 / 0.2 (1.9 / 0.31) 1.1 / 0.18 (1.8 / 0.29) (1.2 / 0.2) 1.98/ 0.34 1.2 / 0.22 (1.98/ 0.35) 1.2 / 0.22 (1.98/ 0.36) –Auto Command™ Transmission Armrest type – – – – – Active StopStart function – – – – – Force base propulsion control – – – – – Auto Command™ continuously variable transmission (40 kph ECO) – – – – – Min. speed / Max. speed mph – 0.01 / 25 @ – 0.01 / 25 @ – 0.01 / 25 @ – 0.02 / 25 @ – 0.02 / 25 @ 0.02 / 25 @ 1450 rpm 0.02 / 25 @ 1450 rpm

1550 rpm 1550 rpm 1550 rpm 1450 rpm 1450 rpm Auto Command™ continuously variable transmission (50 kph ECO) – O – O – O – O – O O OMin. speed / Max. speed mph – 0.01 / 31 @ – 0.01 / 31 @ – 0.01 / 31 @ – 0.02 / 31 @ – 0.02 / 31 @ 0.02 / 31 @ 1550 rpm 0.02 / 31 @ 1550 rpm

1700 rpm 1700 rpm 1700 rpm 1550 rpm 1550 rpmElectrical12 volt alternator Standard / Optional (Amps) 120 / 150 150 / 200 120 / 150 150 / 200 120 / 150 150 / 200 150 150 / 200 150 150 / 200 150 / 200 150 / 200Battery capacity (CCA / Ah) 960 / 132 960 / 132 960 / 132 1300 / 176 1300 / 176 1300 / 176 1300 / 176Axles4WD front axle Terraglide™ front axle suspension O O O O O O OSupersteer™ front axle O O O O O O OSteering angle standard / Terraglide™ / SuperSteer™ axle (°) 55 / 55 / 65 55 / 55 / 65 55 / 55 / 65 55 / 55 / 65 55 / 55 / 65 55 / 55 / 65 55 / 55 / 65Fast Steer™ system O O O O O O OTerralock™ functions Dynamic front fenders O O O O O O OBar rear axle O O O O O O OTurning radius with SuperSteer™ front axle in (mm) 194.9 (4950) 194.9 (4950) 194.9 (4950) 224.6 (5705) 224.6 (5705) 224.6 (5705) 224.6 (5705)Turning radius with Standard / Terraglide™ in (mm) 214.6 (5450) 214.6 (5450) 214.6 (5450) 240.2 (6100) 240.2 (6100) 240.2 (6100) 240.2 (6100)suspension front axleHydraulics Closed Center Load Sensing (CCLS) Main pump flow Standard / MegaFlow™ option*** gpm (Lpm) 29.8 / 33 (113 / 125)**** 29.8 / 33 (113 / 125)**** 29.8 / 33 (113 / 125)**** 32 / 39.5 (120 / 150) 32 / 39.5 (120 / 150) 32 / 39.5 (120 / 150) 32 / 39.5 (120 / 150)Electronic Draft Control (EDC) Remote Valves Type Deluxe Electro Deluxe Electro Deluxe Electro Deluxe Electro Deluxe Electro Electro hydraulic Electro hydraulic

hydraulic hydraulic hydraulic hydraulic hydraulicMax. no. rear valves 4 5 4 5 4 5 4 5 4 5 5 5Joystick control O O O O O O OMax. no. mid mount valves 3 3 3 3 3 3 3Front loader ready O O O O O O ORear Linkage Max. lift capacity at ball ends lbs (kg) 12185 (5527) 12185 (5527) 12185 (5527) 12787 (5800) 12787 (5800) 12787 (5800) 12787 (5800)Max. lift capacity through the range lbs (kg) 11821 (5362) 11821 (5362) 11821 (5362) 10746 (4874) 10746 (4874) 10746 (4874) 10746 (4874)(610 mm behind ball ends)Front linkage lift capacity at ball ends lbs (kg) 7866 (3568) 7866 (3568) 7866 (3568) 8344 (3785) 8344 (3785) 8344 (3785) 8344 (3785)(through the range)

Standard O Optional – Not available * Developed by FPT - Fiat Powertrain Technologies ***Engine speed for Range & Power Command @ 2200 rpm and Auto Command @ 1800rpm **** MegaFlow™ option only available on Auto Command versions

Clas

sic

Side

Win

der I

I

Clas

sic

Side

Win

der I

I

Clas

sic

Side

Win

der I

I

Clas

sic

Side

Win

der I

I

Clas

sic

Side

Win

der I

I

Side

Win

der I

I

Side

Win

der I

I

Armrest type

PTOAuto soft start Engine speed at:540 / 1000 (rpm) 1969 / 1924 1969 / 1924 1969 / 1924 1893 / 1950 1893 / 1950 1893 / 1950 1893 / 1950540E / 1000 (rpm) – – – – 1569 / 1893 – 1569 / 1893 1569 / 1893 1569 / 18931000 / 1000E (rpm) – – – – 1912 / 1583 – 1912 / 1583 1912 / 1583 1912 / 1583

Auto PTO management O O O O O Front PTO (1000rpm) O O O O O O OBrakes Exhaust brake O O O O O O ORange and Power Command electronic park brake O O O O O O –Auto Command electronic park brake – – – – – Hydraulic trailer brakes O O O O O O OOptional pneumatic trailer braking system O O O O O O OCab Four pillar 360° Horizon™ cab with FOPS - OECD code 10 level 1 Horizon™ cab category level - EN 15695 2 2 2 2 2 2 2High visibility roof hatch O O O O O O OHigh visibility RHS door – – – – – Opening RHS door O O O O O O OHeated front and rear windscreen – O – O – O – O – O O OHID lighting pack O O O O O O ODeluxe air suspension seat with seat belt Auto Comfort™ seat with seat belt O O O O O O OAuto Comfort™ heated seat with seat belt O O O O O O OAuto Comfort™ heated leather seat with seat belt – – – O O O OInstructors seat with seat belt SideWinder™ II armrest – – – – – CommandGrip™ handle – – – – – Electronic adjustment of SideWinder™ II armrest – – – – – Air conditioning Automatic climate control O O O O O O OAir recirculation filters Bluetooth radio (hands free phone calls) O O O O O O OTelescopic shatterproof mirrors Electric telescopic wide angle mirrors O O O O O O OComfort Ride™ cab suspension O O O O O Headland Turn Sequence II System (HTS2) – – – – – Fender mounted external PTO & linkage controls Fender mounted external remote valve control IntelliView™ IV large screen 10.4" display – – – – – ISO 11783 connector – – – – – IntelliSteer™ auto guidance ready O O O O O O OIntelliSteer™ auto guidance complete O O O O O O ORange and Power Command optimum cab noise level - 77/311EEC (dB(A) 70 70 70 70 70 70 70Auto Command optimum cab noise level - 77/311EEC (dB(A) 69 69 69 69 69 69 69Optimum seat vibration level - EN 1032 (m/s²) 0.91 0.91 0.91 0.91 0.91 0.91 0.91Weights Minimum unballasted / shipping weight - lbs (kg) 12677 / 12787 12677 / 12787 13117 / 13228 15322 (6950) 15322 (6950) 15322 (6950) 15322 (6950)Standard front axle (5750 / 5800) (5750 / 5800) (5950 / 6000) Minimum unballasted / shipping weight - lbs (kg) 13338 / 13448 13338 / 13448 13779 / 13889 16094 (7300) 16094 (7300) 16094 (7300) 16094 (7300)Terraglide™ suspended front axle (6050 / 6100) (6050 / 6100) (6250 / 6300) Minimum unballasted / shipping weight - lbs (kg) 13294 / 13404 13294 / 13404 13735 / 13845 15653 (7100) 15653 (7100) 15653 (7100) 15653 (7100)SuperSteer™ front axle (6030 / 6080) (6030 / 6080) (6230 / 6280) Max. permissible weight at 50 kph lbs (kg) 24251 (11000) 24251 (11000) 24251 (11000) 28660 (13000) 28660 (13000) 28660 (13000) 28660 (13000)

MODELS T7.175 T7.190 T7.210 T7.230 T7.245 T7.260 T7.270

Clas

sic

Side

Win

der I

I

Clas

sic

Side

Win

der I

I

Clas

sic

Side

Win

der I

I

Clas

sic

Side

Win

der I

I

Clas

sic

Side

Win

der I

I

Side

Win

der I

I

Side

Win

der I

I

DIMENSIONS T7.175 - T7.210 T7.230 - T7.270With rear tire size 18.4R38 20.8R42A Overall length inc. weight pack and rear linkage in. (mm) 211 (5347) 227.3 (5773)B Minimum width in. (mm) 95.8 (2408) 97.2 (2470)C Height at center of rear axle to top of cab in. (mm) 87.2 (2215) 84.3 (2140)D Overall height in. (mm) 118.5 (3010) 122.6 (3115)E Wheelbase

Standard axle in. (mm) 107.6 (2734) 113.5 (2884)Terraglide™ suspended axle in. (mm) 109.8 (2789) 113.5 (2884)SuperSteer™ axle in. (mm) 113.3 (2880) 117.2 (2977)

F Track width (min. / max.) in. (mm) 64.2 (1630) / 88.0 (2234) 71.1 (1806) / 88.0 (2236)G Ground clearance (depends on hitch or tow hook) in. (mm) 20.8 (515) 18.6 (473)

FB

E

CD

G

BA

GF

CD

EA

NH31T717073 • 0314XX • SG • PRINTED IN U.S.A.We are proud to support the FFA.

There’s a certain way of thinking that comes from living on a farm.Farming takes equal parts brain and brawn. Not to mention thickskin, calloused hands and a fair share of know how. Seasoned farmers know it helps to have equipment that’s built by farmers, soldby farmers and used by farmers.You might call that instinct, but wecall it fieldSMART™.

Support at every step. When you place your confidence in New Holland agricultural equipment, you get the finest in localsupport. Your New Holland dealer understands the many challengesyou face and stands behind you at every step with the equipment,parts, service and financial solutions to make your job easier. Look to New Holland for a complete selection of equipment, including a full line of tractors, hay & forage equipment, harvesting,crop production and material handling equipment.

Quality parts and service. Turn to your New Holland dealer after thesale for expert, factory-trained service and genuine New Holland–branded parts. Your dealer has the very latest service updates andtraining to ensure your equipment keeps working productively seasonafter season.

Financing solutions. Your New Holland dealer can tell you aboutsmart ways to turn your financial challenges into opportunities witha portfolio of innovative financial services available through CNHIndustrial Capital, including customized financing, leasing, insuranceand the purchasing convenience of a Commercial Revolving Account.

For reliable equipment, parts and service — or just honest advice on farming and finance — turn to New Holland and your trusted New Holland dealer. We know. We’re farmers, too.

TOP SERVICE IS MANAGED IN CLOSE PARTNERSHIP WITH NEW HOLLAND DEALERS AND SERVICE TEAMS.

TOP AVAILABILITYYear-round support and information— just by callingone toll-free number.

TOP SPEEDExpress parts delivery whenand where you need it.

TOP PRIORITYFast-track solutions maximizeyour productivity — becauseyour harvest can’t wait.

TOP SATISFACTIONWe drive and track the solutionyou need, keeping you informed— until you are back to work.

VALUE, SERVICE AND SOLUTIONS

NEW HOLLAND TOP SERVICESMTOTAL SUPPORT, TIMELY INFORMATION FOR NEW HOLLAND CUSTOMERS.

Safety begins with a thorough understandingof the equipment. Always make sure you and

your operators read the Operator’s Manualbefore using the equipment. Pay close

attention to all safety and operating decalsand never operate machinery without

all shields, protective devices andstructures in place.

Design, materials and/or specifications are subject to change without notice andwithout liability therefor. Specifications are applicable to units sold in Canada, theUnited States, its territories and possessions, and may vary outside these areas.

© 2014 CNH Industrial America LLC. All rights reserved. New Holland is a trademark registered in the United States and many other countries, owned byor licensed to CNH Industrial N.V., its subsidiaries or affiliates. Any trademarksreferred to herein, in association with goods and/or services of companies, otherthan owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates, arethe property of those respective companies.

Learn more at www.newholland.com/na